luci-app-pbx(-voicemail): remove from repo

Remove the luci-app-pbx(-voicemail) packages, as they have been
marked BROKEN since August 2016.

The pbx packages depend on asterisk 1.8 that is EOL upstream
and has been moved from the telephony feed to the abandoned feed.

If LuCI pbx packages are still needed, they should be refreshed
to depend on a current asterisk version from the telephony feed,
and to match the features of that asterisk version.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

1 files changed, 0 insertions, 153 deletions

diff --git a/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua b/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua
deleted file mode 100644
index a6087e9aec..0000000000
--- a/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua
+++ /dev/null
@@ -1,153 +0,0 @@
---[[
-    Copyright 2011 Iordan Iordanov <iiordanov (AT) gmail.com>
-
-    This file is part of luci-pbx-voicemail.
-
-    luci-pbx-voicemail is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    luci-pbx-voicemail is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with luci-pbx-voicemail.  If not, see <http://www.gnu.org/licenses/>.
-]]--
-
-if     nixio.fs.access("/etc/init.d/asterisk")   then
-   server = "asterisk"
-elseif nixio.fs.access("/etc/init.d/freeswitch") then
-   server = "freeswitch"
-else
-   server = ""
-end
-
-modulename = "pbx-voicemail"
-vmlogfile  = "/tmp/last_sent_voicemail.log"
-
-m = Map (modulename, translate("Voicemail Setup"),
-         translate("Here you can configure a global voicemail for this PBX. Since this system is \
-         intended to run on embedded systems like routers, there is no local storage of voicemail - \
-         it must be sent out by email. Therefore you need to configure an outgoing mail (SMTP) server \
-         (for example your ISP's, Google's, or Yahoo's SMTP server), and provide a list of \
-         addresses that receive recorded voicemail."))
-
--- Recreate the config, and restart services after changes are commited to the configuration.
-function m.on_after_commit(self)
-        luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
-        luci.sys.call("/etc/init.d/"     .. server .. " restart 1\>/dev/null 2\>/dev/null")
-end
-
-
-----------------------------------------------------------------------------------------------------
-s = m:section(NamedSection, "global_voicemail", "voicemail", translate("Global Voicemail Setup"),
-              translate("When you enable voicemail, you will have the opportunity to specify \
-              email addresses that receive recorded voicemail. You must also set up an SMTP server below."))
-s.anonymous = true
-
-enable = s:option(ListValue, "enabled", translate("Enable Voicemail"))
-enable:value("yes", translate("Yes"))
-enable:value("no",  translate("No"))
-enable.default = "no"
-
-emails = s:option(DynamicList, "global_email_addresses",
-                  translate("Email Addresses that Receive Voicemail"))
-emails:depends("enabled", "yes")
-
-savepath = s:option(Value, "global_save_path", translate("Local Storage Directory"),
-                    translate("You can also retain copies of voicemail messages on the device running \
-                              your PBX. The path specified here will be created if it doesn't exist. \
-                              Beware of limited space on embedded devices like routers, and enable this \
-                              option only if you know what you are doing."))
-savepath.optional = true
-
-if     nixio.fs.access("/etc/pbx-voicemail/recordings/greeting.gsm")   then
-   m1 = s:option(DummyValue, "_m1")
-   m1:depends("enabled", "yes")
-   m1.default = "NOTE: Found a voicemail greeting. To check or change your voicemail greeting, dial *789 \
-                 and the system will play back your current greeting. After that, a long beep will sound and \
-                 you can press * in order to record a new message. Hang up to avoid recording a message. \
-                 If you press *, a second long beep will sound, and you can record a new greeting. \
-                 Hang up or press # to stop recording. When # is pressed the system will play back the \
-                 new greeting."
-else
-   m1 = s:option(DummyValue, "_m1")
-   m1:depends("enabled", "yes")
-   m1.default = "WARNING: Could not find voicemail greeting. Callers will hear only a beep before \
-                 recording starts. To record a greeting, dial *789, and press * after the long beep. \
-                 If you press *, a second long beep will sound, and you can record a new greeting. \
-                 Hang up or press # to stop recording. When # is pressed the system will play back the \
-                 new greeting."
-end
-
-
-----------------------------------------------------------------------------------------------------
-s = m:section(NamedSection, "voicemail_smtp", "voicemail", translate("Outgoing mail (SMTP) Server"),
-              translate("In order for this PBX to send emails containing voicemail recordings, you need to \
-              set up an SMTP server here. Your ISP usually provides an SMTP server for that purpose. \
-              You can also set up a third party SMTP server such as the one provided by Google or Yahoo."))
-s.anonymous = true
-
-serv = s:option(Value, "smtp_server", translate("SMTP Server Hostname or IP Address"))
-serv.datatype = "host(0)"
-
-port = s:option(Value, "smtp_port", translate("SMTP Port Number"))
-port.datatype = "port"
-port.default = "25"
-
-tls = s:option(ListValue, "smtp_tls", translate("Secure Connection Using TLS"))
-tls:value("on",  translate("Yes"))
-tls:value("off", translate("No"))
-tls.default = "on"
-
-auth = s:option(ListValue, "smtp_auth", translate("SMTP Server Authentication"))
-auth:value("on",  translate("Yes"))
-auth:value("off", translate("No"))
-auth.default = "off"
-
-user = s:option(Value, "smtp_user", translate("SMTP User Name"))
-user:depends("smtp_auth", "on")
-
-pwd = s:option(Value, "smtp_password", translate("SMTP Password"),
-               translate("Your real SMTP password is not shown for your protection. It will be changed \
-                         only when you change the value in this box."))
-pwd.password = true
-pwd:depends("smtp_auth", "on")
-                            
--- We skip reading off the saved value and return nothing.
-function pwd.cfgvalue(self, section)
-   return "Password Not Displayed"
-end
-   
--- We check the entered value against the saved one, and only write if the entered value is
--- something other than the empty string, and it differes from the saved value.
-function pwd.write(self, section, value)
-   local orig_pwd = m:get(section, self.option)
-   if value == "Password Not Displayed" then value = "" end
-   if value and #value > 0 and orig_pwd ~= value then
-      Value.write(self, section, value)
-   end
-end
-
-----------------------------------------------------------------------------------------------------
-s = m:section(NamedSection, "voicemail_log", "voicemail", translate("Last Sent Voicemail Log"))
-s.anonymous = true
-
-s:option (DummyValue, "vmlog")
-
-sts = s:option(DummyValue, "_sts") 
-sts.template = "cbi/tvalue"
-sts.rows = 5
-
-function sts.cfgvalue(self, section)
-   log = nixio.fs.readfile(vmlogfile)
-   if log == nil or log == "" then
-      log = "No errors or messages reported."
-   end
-   return log
-end
-
-return m