diff options
Diffstat (limited to 'applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua')
| -rw-r--r-- | applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua b/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua deleted file mode 100644 index a6087e9aec..0000000000 --- a/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua +++ /dev/null @@ -1,153 +0,0 @@ ---[[ - Copyright 2011 Iordan Iordanov <iiordanov (AT) gmail.com> - - This file is part of luci-pbx-voicemail. - - luci-pbx-voicemail is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - luci-pbx-voicemail is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with luci-pbx-voicemail. If not, see <http://www.gnu.org/licenses/>. -]]-- - -if nixio.fs.access("/etc/init.d/asterisk") then - server = "asterisk" -elseif nixio.fs.access("/etc/init.d/freeswitch") then - server = "freeswitch" -else - server = "" -end - -modulename = "pbx-voicemail" -vmlogfile = "/tmp/last_sent_voicemail.log" - -m = Map (modulename, translate("Voicemail Setup"), - translate("Here you can configure a global voicemail for this PBX. Since this system is \ - intended to run on embedded systems like routers, there is no local storage of voicemail - \ - it must be sent out by email. Therefore you need to configure an outgoing mail (SMTP) server \ - (for example your ISP's, Google's, or Yahoo's SMTP server), and provide a list of \ - addresses that receive recorded voicemail.")) - --- Recreate the config, and restart services after changes are commited to the configuration. -function m.on_after_commit(self) - luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null") - luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null") -end - - ----------------------------------------------------------------------------------------------------- -s = m:section(NamedSection, "global_voicemail", "voicemail", translate("Global Voicemail Setup"), - translate("When you enable voicemail, you will have the opportunity to specify \ - email addresses that receive recorded voicemail. You must also set up an SMTP server below.")) -s.anonymous = true - -enable = s:option(ListValue, "enabled", translate("Enable Voicemail")) -enable:value("yes", translate("Yes")) -enable:value("no", translate("No")) -enable.default = "no" - -emails = s:option(DynamicList, "global_email_addresses", - translate("Email Addresses that Receive Voicemail")) -emails:depends("enabled", "yes") - -savepath = s:option(Value, "global_save_path", translate("Local Storage Directory"), - translate("You can also retain copies of voicemail messages on the device running \ - your PBX. The path specified here will be created if it doesn't exist. \ - Beware of limited space on embedded devices like routers, and enable this \ - option only if you know what you are doing.")) -savepath.optional = true - -if nixio.fs.access("/etc/pbx-voicemail/recordings/greeting.gsm") then - m1 = s:option(DummyValue, "_m1") - m1:depends("enabled", "yes") - m1.default = "NOTE: Found a voicemail greeting. To check or change your voicemail greeting, dial *789 \ - and the system will play back your current greeting. After that, a long beep will sound and \ - you can press * in order to record a new message. Hang up to avoid recording a message. \ - If you press *, a second long beep will sound, and you can record a new greeting. \ - Hang up or press # to stop recording. When # is pressed the system will play back the \ - new greeting." -else - m1 = s:option(DummyValue, "_m1") - m1:depends("enabled", "yes") - m1.default = "WARNING: Could not find voicemail greeting. Callers will hear only a beep before \ - recording starts. To record a greeting, dial *789, and press * after the long beep. \ - If you press *, a second long beep will sound, and you can record a new greeting. \ - Hang up or press # to stop recording. When # is pressed the system will play back the \ - new greeting." -end - - ----------------------------------------------------------------------------------------------------- -s = m:section(NamedSection, "voicemail_smtp", "voicemail", translate("Outgoing mail (SMTP) Server"), - translate("In order for this PBX to send emails containing voicemail recordings, you need to \ - set up an SMTP server here. Your ISP usually provides an SMTP server for that purpose. \ - You can also set up a third party SMTP server such as the one provided by Google or Yahoo.")) -s.anonymous = true - -serv = s:option(Value, "smtp_server", translate("SMTP Server Hostname or IP Address")) -serv.datatype = "host(0)" - -port = s:option(Value, "smtp_port", translate("SMTP Port Number")) -port.datatype = "port" -port.default = "25" - -tls = s:option(ListValue, "smtp_tls", translate("Secure Connection Using TLS")) -tls:value("on", translate("Yes")) -tls:value("off", translate("No")) -tls.default = "on" - -auth = s:option(ListValue, "smtp_auth", translate("SMTP Server Authentication")) -auth:value("on", translate("Yes")) -auth:value("off", translate("No")) -auth.default = "off" - -user = s:option(Value, "smtp_user", translate("SMTP User Name")) -user:depends("smtp_auth", "on") - -pwd = s:option(Value, "smtp_password", translate("SMTP Password"), - translate("Your real SMTP password is not shown for your protection. It will be changed \ - only when you change the value in this box.")) -pwd.password = true -pwd:depends("smtp_auth", "on") - --- We skip reading off the saved value and return nothing. -function pwd.cfgvalue(self, section) - return "Password Not Displayed" -end - --- We check the entered value against the saved one, and only write if the entered value is --- something other than the empty string, and it differes from the saved value. -function pwd.write(self, section, value) - local orig_pwd = m:get(section, self.option) - if value == "Password Not Displayed" then value = "" end - if value and #value > 0 and orig_pwd ~= value then - Value.write(self, section, value) - end -end - ----------------------------------------------------------------------------------------------------- -s = m:section(NamedSection, "voicemail_log", "voicemail", translate("Last Sent Voicemail Log")) -s.anonymous = true - -s:option (DummyValue, "vmlog") - -sts = s:option(DummyValue, "_sts") -sts.template = "cbi/tvalue" -sts.rows = 5 - -function sts.cfgvalue(self, section) - log = nixio.fs.readfile(vmlogfile) - if log == nil or log == "" then - log = "No errors or messages reported." - end - return log -end - -return m |