Rename doc directory to docs

8 files changed, 0 insertions, 325 deletions

diff --git a/doc/.gitignore b/doc/.gitignore
deleted file mode 100644
index 71605d5..0000000
--- a/doc/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-Makefile
-Makefile.in
-report.sh
diff --git a/doc/Makefile.am b/doc/Makefile.am
deleted file mode 100644
index b7d199b..0000000
--- a/doc/Makefile.am
+++ /dev/null
@@ -1,8 +0,0 @@
-SUBDIRS = \
-	man8
-
-EXTRA_DIST = \
-	http-error-codes.txt \
-	http-rfcs.txt \
-	filter-howto.txt
-
diff --git a/doc/filter-howto.txt b/doc/filter-howto.txt
deleted file mode 100644
index 3acd813..0000000
--- a/doc/filter-howto.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Using tinyproxy with Your Home/Small Business Network
-
-Written: Patrick L. McGillan
-Edited:  Robert James Kaes (2002-06-04)
------------------------------------------------------
-
-Being as this will be the most common usage and there were no clear
-basic instructions for this scenario, I thought I would write up what
-I did for my home system.
-
-First the layout of the network.  A cable modem is connected through a
-Linksys Router to a small hub.  The computers hanging off the hub and
-have a clear shot to the Internet.
-
-So, the connection from the Internet to the hub looks like this:
-
-   Internet->Cable TV Line->Cable Modem->Linksys Router->Hub/Switch
-
-Restricting Internet web access on some of those computers (connected
-to the hub) is what using tinyproxy is all about.  Using the web
-interface to the Linksys router, turn off all Internet access to those
-computers that shouldn't have direct access to the Internet.  This is
-done by clicking on the advanced tab and entering the IP number in the
-filter range.  Now those computers have to go through a proxy, for
-their access, as they have no direct access.
-
-On one of the Linux computers which still has Internet access (I use
-an old 486) load up tinyproxy.  Now have the users configure their
-Internet Explorer/Netscape Navigator programs to use the proxy on the
-tinyproxy computer box, along with the port number declared in the
-tinyproxy configuration file.  By default, there is no blocking of web
-sites with this program, so I created a file, called "filter", to
-start blocking some sites.
-
-Example "filter" file entries:
-
-bannerads.zwire.com
-ad.doubleclick.net
-ads.fortunecity.com
-
-This filter file usually goes into the same folder, as your
-configuration file.  Be sure and uncomment the 'Filter' line in your
-configuration file and make sure it points at your newly created
-filter file.
-
-------------------------------------------------------------------------
-
-Copyright (c) 2002  Patrick L.  McGillan <pmcgillan@dwx.com>
-
-This document is released under the same copyright license as
-tinyproxy.  You should have found a COPYING file in the top level
-directory of this distribution which contains the current license.
\ No newline at end of file
diff --git a/doc/http-error-codes.txt b/doc/http-error-codes.txt
deleted file mode 100644
index b7fb0cd..0000000
--- a/doc/http-error-codes.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-The following is a list of the response codes for the various states of
-the server. Currently I would recommend we stick to the HTTP/1.0 return
-codes for our errors. Once we start to support the distinction between
-HTTP/1.0 and HTTP/1.1 requests from the client, then we can use the
-HTTP/1.1 responses.
-	-- rjkaes
-
-[ Taken from Apache: The Definitive Guide by Ben Laurie & Peter Laurie.
-  Published by O'Reilly & Associates, Inc. pg. 146-147 ]
-
-HTTP/1.0
-200	OK
-302	Found
-304	Not Modified
-400	Bad Request
-401	Unauthorized
-403	Forbidden
-404	Not Found
-500	Server error
-501	Not Implemented
-502	Bad Gateway
-503	Out of resources
-
-HTTP/1.1
-100	Continue
-101	Switching Protocols
-200	Ok
-201	Created
-202	Accepted
-203	Non-Authoritative Information
-204	No Content
-205	Reset Content
-206	Partial Content
-300	Multiple Choices
-301	Moved Permanently
-302	Moved Temporarily
-303	See Other
-304	Not Modified
-305	Use Proxy
-400	Bad Request
-401	Unauthorized
-402	Payment Required
-403	Forbidden
-404	Not Found
-405	Method Not Allowed
-406	Not Acceptable
-407	Proxy Authentication Required
-408	Request Time-out
-409	Conflict
-410	Gone
-411	Length Required
-412	Precondition Failed
-413	Request Entity Too Large
-414	Request-URI Too Large
-415	Unsupported Media Type
-500	Internal Server Error
-501	Not Implemented
-502	Bad Gateway
-503	Service Unavailable
-504	Gateway Time-out
-505	HTTP Version not supported
diff --git a/doc/http-rfcs.txt b/doc/http-rfcs.txt
deleted file mode 100644
index 081d2d0..0000000
--- a/doc/http-rfcs.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-INFO
-----
-The following files were/are useful for the proper coding of
-tinyproxy. Please note: someday tinyproxy will actually be RFC
-compliant, but today is not that day. Right now tinyproxy is pretty
-close to being HTTP/1.0 compliant, but there are probably a few
-incompatibilities kicking around.
-
-RFCs
-----
-1945	Hypertext Transfer Protocol -- HTTP/1.0
-2396	Uniform Resource Identifiers (URI): Generic Syntax
-2616	Hypertext Transfer Protocol -- HTTP/1.1
-2617	HTTP Authentication: Basic and Digest Access Authentication
-
-POSSIBLE LOCATION
------------------
-There are many places to obtain a copy of the RFCs, but I use
-
-      http://www.rfc-editor.org/
-
-since it provides a great search feature for finding all the RFCs for
-a particular topic.
diff --git a/doc/man8/.gitignore b/doc/man8/.gitignore
deleted file mode 100644
index 5ff70f3..0000000
--- a/doc/man8/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-*.1
-*.xml
-*.txt
diff --git a/doc/man8/Makefile.am b/doc/man8/Makefile.am
deleted file mode 100644
index b9eefaa..0000000
--- a/doc/man8/Makefile.am
+++ /dev/null
@@ -1,23 +0,0 @@
-MAN8_FILES  = \
-	tinyproxy.txt
-
-A2X_ARGS = \
-	-d manpage \
-	-f manpage
-
-man_MANS = \
-	$(MAN8_FILES:.txt=.8)
-
-.txt.8:
-if HAVE_A2X
-	a2x $(A2X_ARGS) $<
-else
-	@echo "*** a2x (asciidoc) is required to regenerate $(@) ***"; exit 1;
-endif
-
-EXTRA_DIST = \
-        $(man_MANS)
-
-CLEANFILES = \
-	$(MAN8_FILES:.txt=.8) \
-	$(MAN8_FILES:.txt=.xml)
diff --git a/doc/man8/tinyproxy.txt.in b/doc/man8/tinyproxy.txt.in
deleted file mode 100644
index 569bb81..0000000
--- a/doc/man8/tinyproxy.txt.in
+++ /dev/null
@@ -1,152 +0,0 @@
-TINYPROXY(8)
-============
-:man source:   Version @VERSION@
-:man manual:   Tinyproxy manual
-
-NAME
-----
-
-tinyproxy - A light-weight HTTP proxy daemon
-
-
-SYNOPSIS
---------
-
-*tinyproxy* [-vldch]
-
-
-DESCRIPTION
------------
-
-*tinyproxy* is a light-weight HTTP proxy daemon designed to consume a
-minimum amount of system resources. It listens on a given TCP port and
-handles HTTP proxy requests. Designed from the ground up to be fast and
-yet small, it is an ideal solution for use cases such as embedded
-deployments where a full featured HTTP proxy is required, but the system
-resources for a larger proxy are unavailable.
-
-
-OPTIONS
--------
-
-*tinyproxy* accepts the following options:
-
-*-c <config-file>*::
-    Use an alternate configuration file.
-
-*-d*::
-    Don't daemonize and stay in the foreground. Useful for debugging purposes.
-
-*-h*::
-    Display a short help screen of command line arguments and exit.
-
-*-l*::
-    Display the licensing agreement.
-
-*-v*::
-    Display version information and exit.
-
-
-SIGNALS
--------
-
-In addition to command-line options, there are also several signals that
-can be sent to *tinyproxy* while it is running to generate debugging
-information and to force certain events.
-
-*SIGHUP*::
-    Force Tinyproxy to do a garbage collection on the current
-    connections linked list. This is usually done automatically after a
-    certain number of connections have been handled.
-
-
-TEMPLATE FILES
---------------
-
-There are two occasions when Tinyproxy delivers HTML pages to
-the client on it's own right:
-
-. When an error occurred, a corresponding error page is returned.
-. When a request for the stathost is made, a page summarizing the
-  connection statistics is returned. (See STATHOST below.)
-
-The layout of both error pages and the statistics page can be
-controlled via configurable HTML template files that are plain
-HTML files that additionally understand a few template
-variables.
-
-
-TEMPLATE VARIABLES
-------------------
-
-There are several standard HTML variables that are available in every
-template file:
-
-*request*::
-    The full HTTP request line.
-
-*cause*::
-    The abbreviated cause of the error condition.
-
-*clientip*::
-    The IP address of the client making the request.
-
-*clienthost*::
-    The hostname of the client making the request.
-
-*version*::
-    The version of Tinyproxy.
-
-*package*::
-    The package name. Presently, resolves to 'tinyproxy'.
-
-*date*::
-    The current date/time in HTTP format.
-
-In addition, almost all templates support:
-
-*detail*::
-    A detailed, plain English explanation of the error and possible
-    causes.
-
-When Tinyproxy finds a variable name enclosed in braces, e.g.
-"\{request}", then this is replaced by the value of the corresponding
-variable before delivery of the page.
-
-
-STATHOST
---------
-
-Tinyproxy returns a HTML page with connection statistics when it
-receives a HTTP request for a certain host -- the stathost.  The
-stathost name defaults to `tinyproxy.stats` and can be changed at
-compile-time with the configure switch `--with-stathost` to any name or
-IP address.
-
-The stat file template can be changed at runtime through the
-configuration variable `StatFile`.
-
-
-FILES
------
-
-`/etc/tinyproxy/tinyproxy.conf`, `/var/run/tinyproxy.pid`, `/var/log/tinyproxy.log`
-
-BUGS
-----
-
-To report bugs in Tinyproxy, please visit
-<https://www.banu.com/tinyproxy/support/[https://www.banu.com/tinyproxy/support/]>.
-
-
-COPYRIGHT
----------
-
-Copyright (c) 1998-2000 Steven Young;
-Copyright (c) 2000-2001 Robert James Kaes;
-Copyright (c) 2009 Mukund Sivaraman;
-Copyright (c) 2009 Michael Adam.
-
-This program is distributed under the terms of the GNU General Public
-License version 2 or above. See the COPYING file for additional
-information.