diff options
Diffstat (limited to 'doc/source')
| -rw-r--r-- | doc/source/index.rst | 1 | ||||
| -rw-r--r-- | doc/source/step_by_step.rst | 197 |
2 files changed, 198 insertions, 0 deletions
diff --git a/doc/source/index.rst b/doc/source/index.rst index ff2e6fd4..c51f1e2f 100644 --- a/doc/source/index.rst +++ b/doc/source/index.rst @@ -15,6 +15,7 @@ Contents: overview.rst getting_started.rst using_with_openstack.rst + step_by_step.rst how_l2_segregation_works.rst Indices and tables diff --git a/doc/source/step_by_step.rst b/doc/source/step_by_step.rst new file mode 100644 index 00000000..ab506019 --- /dev/null +++ b/doc/source/step_by_step.rst @@ -0,0 +1,197 @@ +.. _step_by_step_example + +*************************************************** +Step-by-step example for testing ryu with OpenStack +*************************************************** + +Overview +======== +Here is the step-by-step to test if ryu plugin/segregation works with openstack. +In this example, + +#. create one user account as an admin and an user +#. create two projects and create a network tenant for each project +#. run VM instances for each projects +#. open vga console via virt-manager +#. try to ping to each VMs + +Note: in this section, nova/quantum/ryu installation isn't explained. +If you don't have any experience with openstack nova, it is strongly +recommended to try plain nova and quantum with ovs plugin. + +Conventions +=========== +The following variable is used to show values which depends on the +configuration. + +* $username: nova user account name which is used as admin and user + Probably you man want to create two account to separate admin + and user. In this example, only single account is used for + simplicity. + + e.g. yamahata + +* $tenant0: nova project name and tenant name. + This name is used as both nova project name and nova network + tenant name. + Here we abuse nova project name as network tenant name for + simplicity. If you'd like to more complex setting, please refer + to nova documentation. + + e.g. yamahata-project-0 + +* $iprange0: IP ranges which is used for $tenant0 + e.g. 172.17.220.0/25 + +* $tenant1: another project name + e.g. yamahata-project-1 + +* $iprange1: another IP ranges for $tenant1 + e.g. 172.17.221.0/25 + + +step-by-step testing +==================== +In this example, euca2ools is used because it's handy. +The more openstack way is possible, though. + +#. setup nova data base + + Run the following on a nova node:: + + $ sudo nova-manage db sync + +#. Make sure all nova, quantum, ryu and other openstack components are + installed and running + + Especially + + * On nova compute/network node + + * Ryu must be installed + * ryu quantum agent(ryu_quantum_agent.py) is put somewhere and + it must be running + * ovs bridge is configured + + * on machine quantum-server is running + + * Ryu must be installed + + * the db server is accessible from all related servers + +#. create a user on a nova node + + Run the following on a nova node:: + + $ sudo nova-manage --flagfile=/etc/nova/nova.conf user admin $username + + +#. Create project, get the zipfile for the project, unextract it and create + + ssh key for $tenant0 + Run the following:: + + $ sudo nova-manage --flagfile /etc/nova/nova.conf project create $tenant0 --user=$username + $ sudo nova-manage --flagfile=/etc/nova/nova.conf project create $tenant0 $username ./$tenant0.zip + $ sudo unzip ./$tenant0.zip -d $tenant0 + $ source ./$tenant0/novarc + $ euca-add-keypair mykey-$tenant0 > mykey-$tenant0.priv + +#. do the same of the above step for $tenant1 + +#. create networks for each projects + + Run the followings:: + + $ sudo nova-manage --flagfile=/etc/nova/nova.conf network create --label=$tenant0 --fixed_range_v4=$iprange0 --project_id=$tenant0 + $ sudo nova-manage --flagfile=/etc/nova/nova.conf network create --label=$tenant1 --fixed_range_v4=$iprange1 --project_id=$tenant1 + +#. register image file + + Get the vm image from somewhere (or create it by yourself) and register it. + The easiest way is to get the image someone has already created. You can find + links from the below. + + * `Getting Images that Work with OpenStack <http://wiki.openstack.org/GettingImages>`_. + + * `ttylinux by Scott Moser <http://smoser.brickies.net/ubuntu/ttylinux-uec/>`_. + + In this example we use the ttylinux image just because its size is small:: + + $ wget http://smoser.brickies.net/ubuntu/ttylinux-uec/ttylinux-uec-i686-12.1_2.6.35-22_1.tar.gz + $ cloud-publish-tarball ttylinux-uec-i686-12.1_2.6.35-22_1.tar.gz <bucket-name> + $ euca-register <bucket-name>/ttylinux-uec-amd64-12.1_2.6.35-22_1.img.manifest.xml + + Now you get the image id, ari-xxx, aki-xxx and ami-xxx, where xxx is + replaced with some id number. + Depending on which distribution you use, you need to use other command like + uec-publish-tarball. + If you customize images, you may have to use commands like euca-bundle-image, + euca-upload-image, euca-register. + + Or you want to go for more openstack way, glance command is your friend + to create/register image. + +#. run instances + + boot instances for each projects. + In order to test network segregation, 2 or more VM instances need to + be created:: + + $ source ./$tenant0/novarc + $ euca-run-instances ami-<id which you get above> -k mykey-$tenant0 -t m1.tiny + # repeat euca-run-instances for some times. + $ source ./$tenant1/novarc + $ euca-run-instances ami-<id which you get above> -k mykey-$tenant1 -t m1.tiny + + +#. check if VM instances are created + + Get the list of VM instances you've created and their assigned IP address:: + + $ euca-describe-instances + +#. login VM instances and try ping/traceroute + + In plain nova case, you can login the VM instances by ssh like + "ssh -i mykey-$tenant0.priv root@$ipaddress" + However, the VM instances are segregated from the management network. So the + story differs. the easiest way to login the VM is to use virt-manager + (or virsh) on each compute nodes. + Identify on which compute node the VM is running by euca-describe-instances, + and run virt-manager on the compute node. Show the vga console by + virt-manager GUI, then you can login the VM instances. + + Then try "ping <other VM IP or gateway>" or "traceroute <ip address>" + on each consoles. + +#. packet capture (optional) + + You can run wireshark or similar tools in order to observe what packets + are sent. + + +When something goes wrong +========================= +Something can go wrong sometimes unfortunately. +Database tables used by openstack nova/quantum seems very fragile. +Db can result in broken state easily. If you hit it, the easiest way is + +#. stop all the related daemons +#. drop related DB and re-create them. +#. clean up OVS related stuff + + OVS uses its own data base which is persistent. So reboot doesn't fix it. + The leaked resources must be released explicitly by hand. + The following command would help.:: + + # ip link delete <tapxxx> + # tunctl -d <tapxxx> + # ovs-vsctl del-port <br-int> <gw-xxx> + # ovs-vsctl del-port <br-int> <tapxxx> + +#. restart the daemons +#. set up from the scratch. + +Although you can fix it by issuing SQL manually, you have to know what you're +doing with db tables. |