summaryrefslogtreecommitdiffhomepage
path: root/libs/luci-lib-nixio/axTLS/samples/perl
diff options
context:
space:
mode:
Diffstat (limited to 'libs/luci-lib-nixio/axTLS/samples/perl')
-rw-r--r--libs/luci-lib-nixio/axTLS/samples/perl/Makefile43
-rwxr-xr-xlibs/luci-lib-nixio/axTLS/samples/perl/axssl.pl634
2 files changed, 677 insertions, 0 deletions
diff --git a/libs/luci-lib-nixio/axTLS/samples/perl/Makefile b/libs/luci-lib-nixio/axTLS/samples/perl/Makefile
new file mode 100644
index 0000000000..5200c4302e
--- /dev/null
+++ b/libs/luci-lib-nixio/axTLS/samples/perl/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (c) 2007, Cameron Rich
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# * Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of the axTLS project nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+include ../../config/.config
+include ../../config/makefile.conf
+
+all: samples
+TARGET=../../$(STAGE)/axssl.pl
+samples: $(TARGET)
+
+$(TARGET): axssl.pl
+ install $< $@
+
+clean::
+ -@rm -f $(TARGET)
+
diff --git a/libs/luci-lib-nixio/axTLS/samples/perl/axssl.pl b/libs/luci-lib-nixio/axTLS/samples/perl/axssl.pl
new file mode 100755
index 0000000000..e49d52270d
--- /dev/null
+++ b/libs/luci-lib-nixio/axTLS/samples/perl/axssl.pl
@@ -0,0 +1,634 @@
+#!/usr/bin/perl -w
+#
+# Copyright (c) 2007, Cameron Rich
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# * Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of the axTLS project nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# Demonstrate the use of the axTLS library in Perl with a set of
+# command-line parameters similar to openssl. In fact, openssl clients
+# should be able to communicate with axTLS servers and visa-versa.
+#
+# This code has various bits enabled depending on the configuration. To enable
+# the most interesting version, compile with the 'full mode' enabled.
+#
+# To see what options you have, run the following:
+# > [perl] axssl s_server -?
+# > [perl] axssl s_client -?
+#
+# The axtls/axtlsp shared libraries must be in the same directory or be found
+# by the OS. axtlsp.pm must be in this directory or be in @INC.
+#
+# Under Win32, ActivePerl was used (see
+# http://www.activestate.com/Products/ActivePerl/?mp=1)
+#
+use axtlsp;
+use IO::Socket;
+
+# To get access to Win32 file descriptor stuff
+my $is_win32 = 0;
+
+if ($^O eq "MSWin32")
+{
+ eval("use Win32API::File 0.08 qw( :ALL )");
+ $is_win32 = 1;
+}
+
+use strict;
+
+#
+# Win32 has some problems with socket handles
+#
+sub get_native_sock
+{
+ my ($sock) = @_;
+ return $is_win32 ? FdGetOsFHandle($sock) : $sock;
+}
+
+# print version?
+if ($#ARGV == 0 && $ARGV[0] eq "version")
+{
+ printf("axssl.pl ".axtlsp::ssl_version()."\n");
+ exit 0;
+}
+
+#
+# Main entry point. Doesn't do much except works out whether we are a client
+# or a server.
+#
+print_options($#ARGV > -1 ? $ARGV[0] : "")
+ if ($#ARGV < 0 || ($ARGV[0] ne "s_server" && $ARGV[0] ne "s_client"));
+
+
+# Cygwin/Win32 issue - flush our output continuously
+select STDOUT;
+local $|=1;
+
+my $build_mode = axtlsp::ssl_get_config($axtlsp::SSL_BUILD_MODE);
+$ARGV[0] eq "s_server" ? do_server($build_mode) : do_client($build_mode);
+
+#
+# Implement the SSL server logic.
+#
+sub do_server
+{
+ my ($build_mode) = @_;
+ my $i = 1;
+ my $port = 4433;
+ my $options = $axtlsp::SSL_DISPLAY_CERTS;
+ my $quiet = 0;
+ my $password = undef;
+ my $private_key_file = undef;
+ my $cert_size = axtlsp::ssl_get_config($axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+ my $ca_cert_size = axtlsp::ssl_get_config(
+ $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+ my @cert;
+ my @ca_cert;
+
+ while ($i <= $#ARGV)
+ {
+ if ($ARGV[$i] eq "-accept")
+ {
+ print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+ $port = $ARGV[++$i];
+ }
+ elsif ($ARGV[$i] eq "-quiet")
+ {
+ $quiet = 1;
+ $options &= ~$axtlsp::SSL_DISPLAY_CERTS;
+ }
+ elsif ($build_mode >= $axtlsp::SSL_BUILD_SERVER_ONLY)
+ {
+ if ($ARGV[$i] eq "-cert")
+ {
+ print_server_options($build_mode, $ARGV[$i])
+ if $i >= $#ARGV || $#cert >= $cert_size-1;
+
+ push @cert, $ARGV[++$i];
+ }
+ elsif ($ARGV[$i] eq "-key")
+ {
+ print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+ $private_key_file = $ARGV[++$i];
+ $options |= $axtlsp::SSL_NO_DEFAULT_KEY;
+ }
+ elsif ($ARGV[$i] eq "-pass")
+ {
+ print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+ $password = $ARGV[++$i];
+ }
+ elsif ($build_mode >= $axtlsp::SSL_BUILD_ENABLE_VERIFICATION)
+ {
+ if ($ARGV[$i] eq "-verify")
+ {
+ $options |= $axtlsp::SSL_CLIENT_AUTHENTICATION;
+ }
+ elsif ($ARGV[$i] eq "-CAfile")
+ {
+ print_server_options($build_mode, $ARGV[$i])
+ if $i >= $#ARGV || $#ca_cert >= $ca_cert_size-1;
+ push @ca_cert, $ARGV[++$i];
+ }
+ elsif ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+ {
+ if ($ARGV[$i] eq "-debug")
+ {
+ $options |= $axtlsp::SSL_DISPLAY_BYTES;
+ }
+ elsif ($ARGV[$i] eq "-state")
+ {
+ $options |= $axtlsp::SSL_DISPLAY_STATES;
+ }
+ elsif ($ARGV[$i] eq "-show-rsa")
+ {
+ $options |= $axtlsp::SSL_DISPLAY_RSA;
+ }
+ else
+ {
+ print_server_options($build_mode, $ARGV[$i]);
+ }
+ }
+ else
+ {
+ print_server_options($build_mode, $ARGV[$i]);
+ }
+ }
+ else
+ {
+ print_server_options($build_mode, $ARGV[$i]);
+ }
+ }
+ else
+ {
+ print_server_options($build_mode, $ARGV[$i]);
+ }
+
+ $i++;
+ }
+
+ # Create socket for incoming connections
+ my $server_sock = IO::Socket::INET->new(Proto => 'tcp',
+ LocalPort => $port,
+ Listen => 1,
+ Reuse => 1) or die $!;
+
+ ###########################################################################
+ # This is where the interesting stuff happens. Up until now we've
+ # just been setting up sockets etc. Now we do the SSL handshake.
+ ###########################################################################
+ my $ssl_ctx = axtlsp::ssl_ctx_new($options, $axtlsp::SSL_DEFAULT_SVR_SESS);
+ die "Error: Server context is invalid" if not defined $ssl_ctx;
+
+ if (defined $private_key_file)
+ {
+ my $obj_type = $axtlsp::SSL_OBJ_RSA_KEY;
+
+ $obj_type = $axtlsp::SSL_OBJ_PKCS8 if $private_key_file =~ /.p8$/;
+ $obj_type = $axtlsp::SSL_OBJ_PKCS12 if $private_key_file =~ /.p12$/;
+
+ die "Private key '$private_key_file' is undefined." if
+ axtlsp::ssl_obj_load($ssl_ctx, $obj_type,
+ $private_key_file, $password);
+ }
+
+ foreach (@cert)
+ {
+ die "Certificate '$_' is undefined."
+ if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CERT,
+ $_, undef) != $axtlsp::SSL_OK;
+ }
+
+ foreach (@ca_cert)
+ {
+ die "Certificate '$_' is undefined."
+ if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CACERT,
+ $_, undef) != $axtlsp::SSL_OK;
+ }
+
+ for (;;)
+ {
+ printf("ACCEPT\n") if not $quiet;
+ my $client_sock = $server_sock->accept;
+ my $native_sock = get_native_sock($client_sock->fileno);
+
+ # This doesn't work in Win32 - need to get file descriptor from socket.
+ my $ssl = axtlsp::ssl_server_new($ssl_ctx, $native_sock);
+
+ # do the actual SSL handshake
+ my $res;
+ my $buf;
+ my $connected = 0;
+
+ while (1)
+ {
+ ($res, $buf) = axtlsp::ssl_read($ssl, undef);
+ last if $res < $axtlsp::SSL_OK;
+
+ if ($res == $axtlsp::SSL_OK) # connection established and ok
+ {
+ if (axtlsp::ssl_handshake_status($ssl) == $axtlsp::SSL_OK)
+ {
+ if (!$quiet && !$connected)
+ {
+ display_session_id($ssl);
+ display_cipher($ssl);
+ }
+
+ $connected = 1;
+ }
+ }
+
+ if ($res > $axtlsp::SSL_OK)
+ {
+ printf($$buf);
+ }
+ elsif ($res < $axtlsp::SSL_OK)
+ {
+ axtlsp::ssl_display_error($res) if not $quiet;
+ last;
+ }
+ }
+
+ # client was disconnected or the handshake failed.
+ printf("CONNECTION CLOSED\n") if not $quiet;
+ axtlsp::ssl_free($ssl);
+ $client_sock->close;
+ }
+
+ axtlsp::ssl_ctx_free($ssl_ctx);
+}
+
+#
+# Implement the SSL client logic.
+#
+sub do_client
+{
+ my ($build_mode) = @_;
+ my $i = 1;
+ my $port = 4433;
+ my $options = $axtlsp::SSL_SERVER_VERIFY_LATER|$axtlsp::SSL_DISPLAY_CERTS;
+ my $private_key_file = undef;
+ my $reconnect = 0;
+ my $quiet = 0;
+ my $password = undef;
+ my @session_id;
+ my $host = "127.0.0.1";
+ my @cert;
+ my @ca_cert;
+ my $cert_size = axtlsp::ssl_get_config(
+ $axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+ my $ca_cert_size = axtlsp::ssl_get_config(
+ $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+
+ while ($i <= $#ARGV)
+ {
+ if ($ARGV[$i] eq "-connect")
+ {
+ print_client_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+ ($host, $port) = split(':', $ARGV[++$i]);
+ }
+ elsif ($ARGV[$i] eq "-cert")
+ {
+ print_client_options($build_mode, $ARGV[$i])
+ if $i >= $#ARGV || $#cert >= $cert_size-1;
+
+ push @cert, $ARGV[++$i];
+ }
+ elsif ($ARGV[$i] eq "-key")
+ {
+ print_client_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+ $private_key_file = $ARGV[++$i];
+ $options |= $axtlsp::SSL_NO_DEFAULT_KEY;
+ }
+ elsif ($ARGV[$i] eq "-CAfile")
+ {
+ print_client_options($build_mode, $ARGV[$i])
+ if $i >= $#ARGV || $#ca_cert >= $ca_cert_size-1;
+
+ push @ca_cert, $ARGV[++$i];
+ }
+ elsif ($ARGV[$i] eq "-verify")
+ {
+ $options &= ~$axtlsp::SSL_SERVER_VERIFY_LATER;
+ }
+ elsif ($ARGV[$i] eq "-reconnect")
+ {
+ $reconnect = 4;
+ }
+ elsif ($ARGV[$i] eq "-quiet")
+ {
+ $quiet = 1;
+ $options &= ~$axtlsp::SSL_DISPLAY_CERTS;
+ }
+ elsif ($ARGV[$i] eq "-pass")
+ {
+ print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+ $password = $ARGV[++$i];
+ }
+ elsif ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+ {
+ if ($ARGV[$i] eq "-debug")
+ {
+ $options |= $axtlsp::SSL_DISPLAY_BYTES;
+ }
+ elsif ($ARGV[$i] eq "-state")
+ {
+ $options |= $axtlsp::SSL_DISPLAY_STATES;
+ }
+ elsif ($ARGV[$i] eq "-show-rsa")
+ {
+ $options |= $axtlsp::SSL_DISPLAY_RSA;
+ }
+ else # don't know what this is
+ {
+ print_client_options($build_mode, $ARGV[$i]);
+ }
+ }
+ else # don't know what this is
+ {
+ print_client_options($build_mode, $ARGV[$i]);
+ }
+
+ $i++;
+ }
+
+ my $client_sock = new IO::Socket::INET (
+ PeerAddr => $host, PeerPort => $port, Proto => 'tcp')
+ || die ("no socket: $!");
+ my $ssl;
+ my $res;
+ my $native_sock = get_native_sock($client_sock->fileno);
+
+ printf("CONNECTED\n") if not $quiet;
+
+ ###########################################################################
+ # This is where the interesting stuff happens. Up until now we've
+ # just been setting up sockets etc. Now we do the SSL handshake.
+ ###########################################################################
+ my $ssl_ctx = axtlsp::ssl_ctx_new($options, $axtlsp::SSL_DEFAULT_CLNT_SESS);
+ die "Error: Client context is invalid" if not defined $ssl_ctx;
+
+ if (defined $private_key_file)
+ {
+ my $obj_type = $axtlsp::SSL_OBJ_RSA_KEY;
+
+ $obj_type = $axtlsp::SSL_OBJ_PKCS8 if $private_key_file =~ /.p8$/;
+ $obj_type = $axtlsp::SSL_OBJ_PKCS12 if $private_key_file =~ /.p12$/;
+
+ die "Private key '$private_key_file' is undefined." if
+ axtlsp::ssl_obj_load($ssl_ctx, $obj_type,
+ $private_key_file, $password);
+ }
+
+ foreach (@cert)
+ {
+ die "Certificate '$_' is undefined."
+ if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CERT,
+ $_, undef) != $axtlsp::SSL_OK;
+ }
+
+ foreach (@ca_cert)
+ {
+ die "Certificate '$_' is undefined."
+ if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CACERT,
+ $_, undef) != $axtlsp::SSL_OK;
+ }
+
+ # Try session resumption?
+ if ($reconnect)
+ {
+ my $session_id = undef;
+ my $sess_id_size = 0;
+
+ while ($reconnect--)
+ {
+ $ssl = axtlsp::ssl_client_new($ssl_ctx, $native_sock,
+ $session_id, $sess_id_size);
+
+ $res = axtlsp::ssl_handshake_status($ssl);
+ if ($res != $axtlsp::SSL_OK)
+ {
+ axtlsp::ssl_display_error($res) if !$quiet;
+ axtlsp::ssl_free($ssl);
+ exit 1;
+ }
+
+ display_session_id($ssl);
+ $session_id = axtlsp::ssl_get_session_id($ssl);
+
+ if ($reconnect)
+ {
+ axtlsp::ssl_free($ssl);
+ $client_sock->close;
+ $client_sock = new IO::Socket::INET (
+ PeerAddr => $host, PeerPort => $port, Proto => 'tcp')
+ || die ("no socket: $!");
+
+ }
+ }
+ }
+ else
+ {
+ $ssl = axtlsp::ssl_client_new($ssl_ctx, $native_sock, undef, 0);
+ }
+
+ # check the return status
+ $res = axtlsp::ssl_handshake_status($ssl);
+ if ($res != $axtlsp::SSL_OK)
+ {
+ axtlsp::ssl_display_error($res) if not $quiet;
+ exit 1;
+ }
+
+ if (!$quiet)
+ {
+ my $common_name = axtlsp::ssl_get_cert_dn($ssl,
+ $axtlsp::SSL_X509_CERT_COMMON_NAME);
+
+ printf("Common Name:\t\t\t%s\n", $common_name) if defined $common_name;
+ display_session_id($ssl);
+ display_cipher($ssl);
+ }
+
+ while (<STDIN>)
+ {
+ my $cstring = pack("a*x", $_); # add null terminator
+ $res = axtlsp::ssl_write($ssl, \$cstring, length($cstring));
+ if ($res < $axtlsp::SSL_OK)
+ {
+ axtlsp::ssl_display_error($res) if not $quiet;
+ last;
+ }
+ }
+
+ axtlsp::ssl_ctx_free($ssl_ctx);
+ $client_sock->close;
+}
+
+#
+# We've had some sort of command-line error. Print out the basic options.
+#
+sub print_options
+{
+ my ($option) = @_;
+ printf("axssl: Error: '%s' is an invalid command.\n", $option);
+ printf("usage: axssl [s_server|s_client|version] [args ...]\n");
+ exit 1;
+}
+
+#
+# We've had some sort of command-line error. Print out the server options.
+#
+sub print_server_options
+{
+ my ($build_mode, $option) = @_;
+ my $cert_size = axtlsp::ssl_get_config($axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+ my $ca_cert_size = axtlsp::ssl_get_config(
+ $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+
+ printf("unknown option %s\n", $option);
+ printf("usage: s_server [args ...]\n");
+ printf(" -accept arg\t- port to accept on (default is 4433)\n");
+ printf(" -quiet\t\t- No server output\n");
+
+ if ($build_mode >= $axtlsp::SSL_BUILD_SERVER_ONLY)
+ {
+ printf(" -cert arg\t- certificate file to add (in addition to default)".
+ " to chain -\n".
+ "\t\t Can repeat up to %d times\n", $cert_size);
+ printf(" -key arg\t- Private key file to use - default DER format\n");
+ printf(" -pass\t\t- private key file pass phrase source\n");
+ }
+
+ if ($build_mode >= $axtlsp::SSL_BUILD_ENABLE_VERIFICATION)
+ {
+ printf(" -verify\t- turn on peer certificate verification\n");
+ printf(" -CAfile arg\t- Certificate authority - default DER format\n");
+ printf("\t\t Can repeat up to %d times\n", $ca_cert_size);
+ }
+
+ if ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+ {
+ printf(" -debug\t\t- Print more output\n");
+ printf(" -state\t\t- Show state messages\n");
+ printf(" -show-rsa\t- Show RSA state\n");
+ }
+
+ exit 1;
+}
+
+#
+# We've had some sort of command-line error. Print out the client options.
+#
+sub print_client_options
+{
+ my ($build_mode, $option) = @_;
+ my $cert_size = axtlsp::ssl_get_config($axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+ my $ca_cert_size = axtlsp::ssl_get_config(
+ $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+
+ printf("unknown option %s\n", $option);
+
+ if ($build_mode >= $axtlsp::SSL_BUILD_ENABLE_CLIENT)
+ {
+ printf("usage: s_client [args ...]\n");
+ printf(" -connect host:port - who to connect to (default ".
+ "is localhost:4433)\n");
+ printf(" -verify\t- turn on peer certificate verification\n");
+ printf(" -cert arg\t- certificate file to use - default DER format\n");
+ printf(" -key arg\t- Private key file to use - default DER format\n");
+ printf("\t\t Can repeat up to %d times\n", $cert_size);
+ printf(" -CAfile arg\t- Certificate authority - default DER format\n");
+ printf("\t\t Can repeat up to %d times\n", $ca_cert_size);
+ printf(" -quiet\t\t- No client output\n");
+ printf(" -pass\t\t- private key file pass phrase source\n");
+ printf(" -reconnect\t- Drop and re-make the connection ".
+ "with the same Session-ID\n");
+
+ if ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+ {
+ printf(" -debug\t\t- Print more output\n");
+ printf(" -state\t\t- Show state messages\n");
+ printf(" -show-rsa\t- Show RSA state\n");
+ }
+ }
+ else
+ {
+ printf("Change configuration to allow this feature\n");
+ }
+
+ exit 1;
+}
+
+#
+# Display what cipher we are using
+#
+sub display_cipher
+{
+ my ($ssl) = @_;
+ printf("CIPHER is ");
+ my $cipher_id = axtlsp::ssl_get_cipher_id($ssl);
+
+ if ($cipher_id == $axtlsp::SSL_AES128_SHA)
+ {
+ printf("AES128-SHA");
+ }
+ elsif ($cipher_id == $axtlsp::SSL_AES256_SHA)
+ {
+ printf("AES256-SHA");
+ }
+ elsif ($axtlsp::SSL_RC4_128_SHA)
+ {
+ printf("RC4-SHA");
+ }
+ elsif ($axtlsp::SSL_RC4_128_MD5)
+ {
+ printf("RC4-MD5");
+ }
+ else
+ {
+ printf("Unknown - %d", $cipher_id);
+ }
+
+ printf("\n");
+}
+
+#
+# Display what session id we have.
+#
+sub display_session_id
+{
+ my ($ssl) = @_;
+ my $session_id = axtlsp::ssl_get_session_id($ssl);
+ if (length($$session_id) > 0)
+ {
+ printf("-----BEGIN SSL SESSION PARAMETERS-----\n");
+ printf(unpack("H*", $$session_id));
+ printf("\n-----END SSL SESSION PARAMETERS-----\n");
+ }
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 09:31:39 +0000