luci-mod-system: remplement fstab settings as client side view

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

2 files changed, 0 insertions, 212 deletions

diff --git a/modules/luci-mod-system/luasrc/model/cbi/admin_system/fstab/mount.lua b/modules/luci-mod-system/luasrc/model/cbi/admin_system/fstab/mount.lua
deleted file mode 100644
index f21a2775e1..0000000000
--- a/modules/luci-mod-system/luasrc/model/cbi/admin_system/fstab/mount.lua
+++ /dev/null
@@ -1,158 +0,0 @@
--- Copyright 2010 Jo-Philipp Wich <jow@openwrt.org>
--- Licensed to the public under the Apache License 2.0.
-
-local fs   = require "nixio.fs"
-local util = require "nixio.util"
-
-local has_fscheck = fs.access("/usr/sbin/e2fsck")
-
-local block = io.popen("block info", "r")
-local ln, dev, devices = nil, nil, {}
-
-repeat
-	ln = block:read("*l")
-	dev = ln and ln:match("^/dev/(.-):")
-
-	if dev then
-		local e, s, key, val = { }
-
-		for key, val in ln:gmatch([[(%w+)="(.-)"]]) do
-			e[key:lower()] = val
-		end
-
-		s = tonumber((fs.readfile("/sys/class/block/%s/size" % dev)))
-
-		e.dev  = "/dev/%s" % dev
-		e.size = s and math.floor(s / 2048)
-
-		devices[#devices+1] = e
-	end
-until not ln
-
-block:close()
-
-
-m = Map("fstab", translate("Mount Points - Mount Entry"))
-m.redirect = luci.dispatcher.build_url("admin/system/fstab")
-
-if not arg[1] or m.uci:get("fstab", arg[1]) ~= "mount" then
-	luci.http.redirect(m.redirect)
-	return
-end
-
-
-
-mount = m:section(NamedSection, arg[1], "mount", translate("Mount Entry"))
-mount.anonymous = true
-mount.addremove = false
-
-mount:tab("general",  translate("General Settings"))
-mount:tab("advanced", translate("Advanced Settings"))
-
-
-mount:taboption("general", Flag, "enabled", translate("Enable this mount")).rmempty = false
-
-
-o = mount:taboption("general", Value, "uuid", translate("UUID"),
-	translate("If specified, mount the device by its UUID instead of a fixed device node"))
-
-o:value("", translate("-- match by uuid --"))
-
-for i, d in ipairs(devices) do
-	if d.uuid and d.size then
-		o:value(d.uuid, "%s (%s, %d MB)" %{ d.uuid, d.dev, d.size })
-	elseif d.uuid then
-		o:value(d.uuid, "%s (%s)" %{ d.uuid, d.dev })
-	end
-end
-
-
-o = mount:taboption("general", Value, "label", translate("Label"),
-	translate("If specified, mount the device by the partition label instead of a fixed device node"))
-
-o:value("", translate("-- match by label --"))
-
-o:depends("uuid", "")
-
-for i, d in ipairs(devices) do
-	if d.label and d.size then
-		o:value(d.label, "%s (%s, %d MB)" %{ d.label, d.dev, d.size })
-	elseif d.label then
-		o:value(d.label, "%s (%s)" %{ d.label, d.dev })
-	end
-end
-
-
-o = mount:taboption("general", Value, "device", translate("Device"),
-	translate("The device file of the memory or partition (<abbr title=\"for example\">e.g.</abbr> <code>/dev/sda1</code>)"))
-
-o:value("", translate("-- match by device --"))
-
-o:depends({ uuid = "", label = "" })
-
-for i, d in ipairs(devices) do
-	if d.size then
-		o:value(d.dev, "%s (%d MB)" %{ d.dev, d.size })
-	else
-		o:value(d.dev)
-	end
-end
-
-
-o = mount:taboption("general", Value, "target", translate("Mount point"),
-	translate("Specifies the directory the device is attached to"))
-
-o:value("/", translate("Use as root filesystem (/)"))
-o:value("/overlay", translate("Use as external overlay (/overlay)"))
-
-
-o = mount:taboption("general", DummyValue, "__notice", translate("Root preparation"))
-o:depends("target", "/")
-o.rawhtml = true
-o.default = [[
-<p>%s</p><pre>mkdir -p /tmp/introot
-mkdir -p /tmp/extroot
-mount --bind / /tmp/introot
-mount /dev/sda1 /tmp/extroot
-tar -C /tmp/introot -cvf - . | tar -C /tmp/extroot -xf -
-umount /tmp/introot
-umount /tmp/extroot</pre>
-]] %{
-	translate("Make sure to clone the root filesystem using something like the commands below:"),
-
-}
-
-
-o = mount:taboption("advanced", Value, "fstype", translate("Filesystem"),
-	translate("The filesystem that was used to format the memory (<abbr title=\"for example\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"))
-
-o:value("", "auto")
-
-local fs
-for fs in io.lines("/proc/filesystems") do
-	fs = fs:match("%S+")
-	if fs ~= "nodev" then
-		o:value(fs)
-	end
-end
-
-local ok, lines = pcall(io.lines, "/etc/filesystem")
-if ok then
-	local fs
-	for fs in lines do
-		o:value(fs)
-	end
-end
-
-o = mount:taboption("advanced", Value, "options", translate("Mount options"),
-	translate("See \"mount\" manpage for details"))
-
-o.placeholder = "defaults"
-
-
-if has_fscheck then
-	o = mount:taboption("advanced", Flag, "enabled_fsck", translate("Run filesystem check"),
-		translate("Run a filesystem check before mounting the device"))
-end
-
-return m
diff --git a/modules/luci-mod-system/luasrc/model/cbi/admin_system/fstab/swap.lua b/modules/luci-mod-system/luasrc/model/cbi/admin_system/fstab/swap.lua
deleted file mode 100644
index 82468d5fcc..0000000000
--- a/modules/luci-mod-system/luasrc/model/cbi/admin_system/fstab/swap.lua
+++ /dev/null
@@ -1,54 +0,0 @@
--- Copyright 2010 Jo-Philipp Wich <jow@openwrt.org>
--- Licensed to the public under the Apache License 2.0.
-
-local fs   = require "nixio.fs"
-local util = require "nixio.util"
-
-local devices = {}
-util.consume((fs.glob("/dev/sd*")), devices)
-util.consume((fs.glob("/dev/hd*")), devices)
-util.consume((fs.glob("/dev/scd*")), devices)
-util.consume((fs.glob("/dev/mmc*")), devices)
-
-local size = {}
-for i, dev in ipairs(devices) do
-	local s = tonumber((fs.readfile("/sys/class/block/%s/size" % dev:sub(6))))
-	size[dev] = s and math.floor(s / 2048)
-end
-
-
-m = Map("fstab", translate("Mount Points - Swap Entry"))
-m.redirect = luci.dispatcher.build_url("admin/system/fstab")
-
-if not arg[1] or m.uci:get("fstab", arg[1]) ~= "swap" then
-	luci.http.redirect(m.redirect)
-	return
-end
-
-
-mount = m:section(NamedSection, arg[1], "swap", translate("Swap Entry"))
-mount.anonymous = true
-mount.addremove = false
-
-mount:tab("general",  translate("General Settings"))
-mount:tab("advanced", translate("Advanced Settings"))
-
-
-mount:taboption("general", Flag, "enabled", translate("Enable this swap")).rmempty = false
-
-
-o = mount:taboption("general", Value, "device", translate("Device"),
-	translate("The device file of the memory or partition (<abbr title=\"for example\">e.g.</abbr> <code>/dev/sda1</code>)"))
-
-for i, d in ipairs(devices) do
-	o:value(d, size[d] and "%s (%s MB)" % {d, size[d]})
-end
-
-o = mount:taboption("advanced", Value, "uuid", translate("UUID"),
-	translate("If specified, mount the device by its UUID instead of a fixed device node"))
-
-o = mount:taboption("advanced", Value, "label", translate("Label"),
-	translate("If specified, mount the device by the partition label instead of a fixed device node"))
-
-
-return m