Synchronize translations

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 222 insertions, 24 deletions

diff --git a/modules/luci-base/po/zh-tw/base.po b/modules/luci-base/po/zh-tw/base.po
index e580adfcd..a2ec282dd 100644
--- a/modules/luci-base/po/zh-tw/base.po
+++ b/modules/luci-base/po/zh-tw/base.po
@@ -32,6 +32,12 @@ msgstr "-- 請選擇 --"
 msgid "-- custom --"
 msgstr "-- 自訂 --"
 
+msgid "-- match by device --"
+msgstr ""
+
+msgid "-- match by label --"
+msgstr ""
+
 msgid "1 Minute Load:"
 msgstr "1分鐘負載"
 
@@ -114,6 +120,9 @@ msgstr ""
 msgid "ADSL Status"
 msgstr ""
 
+msgid "AICCU (SIXXS)"
+msgstr ""
+
 msgid "APN"
 msgstr "APN"
 
@@ -143,6 +152,9 @@ msgstr ""
 msgid "ATM device number"
 msgstr "ATM裝置號碼"
 
+msgid "AYIYA"
+msgstr ""
+
 msgid "Access Concentrator"
 msgstr "接入集線器"
 
@@ -228,13 +240,13 @@ msgid ""
 "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
 msgstr "允許127.0.0.0/8範圍內的上游回應，例如：RBL服務"
 
-msgid "Always announce default router"
+msgid ""
+"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
+"\">Tunneling Comparison</a> on SIXXS"
 msgstr ""
 
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr "強制啟用40MHz頻寬並忽略輔助通道重疊。此選項不相容於IEEE 802.11n-2009!"
+msgid "Always announce default router"
+msgstr ""
 
 msgid "An additional network will be created if you leave this unchecked."
 msgstr "取消選取將會另外建立一個新網路，而不會覆蓋目前的網路設定"
@@ -283,6 +295,9 @@ msgstr "已連接站點"
 msgid "Atheros 802.11%s Wireless Controller"
 msgstr "Atheros 802.11%s 無線控制器"
 
+msgid "AuthGroup"
+msgstr ""
+
 msgid "Authentication"
 msgstr "認證"
 
@@ -346,6 +361,9 @@ msgstr "指定了錯誤的位置！"
 msgid "Band"
 msgstr ""
 
+msgid "Behind NAT"
+msgstr ""
+
 msgid ""
 "Below is the determined list of files to backup. It consists of changed "
 "configuration files marked by opkg, essential base files and the user "
@@ -384,15 +402,15 @@ msgstr "已緩衝"
 msgid "Buttons"
 msgstr "按鈕"
 
+msgid "CA certificate; if empty it will be saved after the first connection."
+msgstr ""
+
 msgid "CPU"
 msgstr "CPU"
 
 msgid "CPU usage (%)"
 msgstr "CPU 使用率 (%)"
 
-msgid "Cached"
-msgstr "已快取"
-
 msgid "Cancel"
 msgstr "取消"
 
@@ -482,9 +500,6 @@ msgstr "啟用設定"
 msgid "Configuration files will be kept."
 msgstr "設定檔將被存檔"
 
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "要採用block-extroot功能,設定這個掛載點當作覆蓋儲存"
-
 msgid "Confirmation"
 msgstr "再確認"
 
@@ -497,6 +512,9 @@ msgstr "已連線"
 msgid "Connection Limit"
 msgstr "連線限制"
 
+msgid "Connection to server fails when TLS cannot be used"
+msgstr ""
+
 msgid "Connections"
 msgstr "連線數"
 
@@ -591,6 +609,9 @@ msgstr "預設 %d"
 msgid "Default gateway"
 msgstr "預設匝道器"
 
+msgid "Default route"
+msgstr ""
+
 msgid "Default state"
 msgstr "預設狀態"
 
@@ -775,9 +796,18 @@ msgstr "啟用TFTP伺服器"
 msgid "Enable VLAN functionality"
 msgstr "啟用VLAN功能"
 
+msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
+msgstr ""
+
 msgid "Enable learning and aging"
 msgstr "啟用智慧學習功能"
 
+msgid "Enable mirroring of incoming packets"
+msgstr ""
+
+msgid "Enable mirroring of outgoing packets"
+msgstr ""
+
 msgid "Enable this mount"
 msgstr "啟用掛載點"
 
@@ -897,9 +927,6 @@ msgstr "更新中..."
 msgid "Force"
 msgstr "強制"
 
-msgid "Force 40MHz mode"
-msgstr "強制40MHz模式"
-
 msgid "Force CCMP (AES)"
 msgstr "強制CCMP (AES)加密"
 
@@ -933,9 +960,6 @@ msgstr "空閒"
 msgid "Free space"
 msgstr "剩餘空間"
 
-msgid "Frequency Hopping"
-msgstr "跳頻"
-
 msgid "GHz"
 msgstr "GHz"
 
@@ -981,15 +1005,15 @@ msgstr " HE.net密碼"
 msgid "HE.net username"
 msgstr ""
 
-msgid "HT mode (802.11n)"
-msgstr ""
-
 msgid "Handler"
 msgstr "多執行緒"
 
 msgid "Hang Up"
 msgstr "斷線"
 
+msgid "Heartbeat"
+msgstr ""
+
 msgid ""
 "Here you can configure the basic aspects of your device like its hostname or "
 "the timezone."
@@ -1024,6 +1048,9 @@ msgstr "當請求DHCP服務時傳送的主機名稱"
 msgid "Hostnames"
 msgstr "主機名稱"
 
+msgid "Hybrid"
+msgstr ""
+
 msgid "IP address"
 msgstr "IP位址"
 
@@ -1069,6 +1096,9 @@ msgstr "IPv6版"
 msgid "IPv6 Firewall"
 msgstr "IPv6防火牆"
 
+msgid "IPv6 Neighbours"
+msgstr ""
+
 msgid "IPv6 Settings"
 msgstr ""
 
@@ -1081,6 +1111,9 @@ msgstr "IPv6寬頻連線狀態"
 msgid "IPv6 address"
 msgstr "IPv6位址"
 
+msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
+msgstr ""
+
 msgid "IPv6 assignment hint"
 msgstr ""
 
@@ -1216,6 +1249,9 @@ msgstr "介面關閉"
 msgid "Interfaces"
 msgstr "介面"
 
+msgid "Internal"
+msgstr ""
+
 msgid "Internal Server Error"
 msgstr "內部伺服器發生錯誤"
 
@@ -1291,6 +1327,9 @@ msgstr "語言"
 msgid "Language and Style"
 msgstr "語言和風格"
 
+msgid "Leaf"
+msgstr ""
+
 msgid "Lease validity time"
 msgstr "租賃有效時間"
 
@@ -1388,8 +1427,8 @@ msgstr "若有多個IP可用, 本地化主機名稱端看請求的子網路而�
 msgid "Localise queries"
 msgstr "本地化網路請求"
 
-msgid "Locked to channel %d used by %s"
-msgstr "鎖定通道 由 %s 使用的 %d "
+msgid "Locked to channel %d used by: %s"
+msgstr ""
 
 msgid "Log output level"
 msgstr "日誌輸出層級"
@@ -1430,6 +1469,11 @@ msgstr "MHz"
 msgid "MTU"
 msgstr "最大傳輸單位MTU"
 
+msgid ""
+"Make sure to clone the root filesystem using something like the commands "
+"below:"
+msgstr ""
+
 msgid "Maximum Rate"
 msgstr "最快速度"
 
@@ -1469,6 +1513,12 @@ msgstr "最低速度"
 msgid "Minimum hold time"
 msgstr "可持有的最低時間"
 
+msgid "Mirror monitor port"
+msgstr ""
+
+msgid "Mirror source port"
+msgstr ""
+
 msgid "Missing protocol extension for proto %q"
 msgstr "協定  %q 漏失的延伸協定"
 
@@ -1537,6 +1587,9 @@ msgstr ""
 msgid "NTP server candidates"
 msgstr "NTP伺服器備選"
 
+msgid "NTP sync time-out"
+msgstr ""
+
 msgid "Name"
 msgstr "名稱"
 
@@ -1670,12 +1723,24 @@ msgstr "有一個以上的欄位缺乏任何數值!"
 msgid "Open list..."
 msgstr "開啟清單..."
 
+msgid "OpenConnect (CISCO AnyConnect)"
+msgstr ""
+
+msgid "Operating frequency"
+msgstr ""
+
 msgid "Option changed"
 msgstr "選項已變更"
 
 msgid "Option removed"
 msgstr "選項已移除"
 
+msgid "Optional, specify to override default server (tic.sixxs.net)"
+msgstr ""
+
+msgid "Optional, use when the SIXXS account has more than one tunnel"
+msgstr ""
+
 msgid "Options"
 msgstr "選項"
 
@@ -1691,6 +1756,9 @@ msgstr "外連:"
 msgid "Outdoor Channels"
 msgstr "室外通道"
 
+msgid "Output Interface"
+msgstr ""
+
 msgid "Override MAC address"
 msgstr "覆蓋MAC位址"
 
@@ -1768,6 +1836,9 @@ msgstr "私人金鑰密碼"
 msgid "Password successfully changed!"
 msgstr "密碼已變更成功!"
 
+msgid "Path"
+msgstr ""
+
 msgid "Path to CA-Certificate"
 msgstr "CA-證書的路徑"
 
@@ -2019,6 +2090,9 @@ msgstr ""
 msgid "Request IPv6-prefix of length"
 msgstr ""
 
+msgid "Require TLS"
+msgstr ""
+
 msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
 msgstr "對特定的ISP需要,例如.DOCSIS 3 加速有線電視寬頻網路"
 
@@ -2058,6 +2132,12 @@ msgstr "根"
 msgid "Root directory for files served via TFTP"
 msgstr "透過TFTP存取根目錄檔案"
 
+msgid "Root preparation"
+msgstr ""
+
+msgid "Routed IPv6 prefix for downstream interfaces"
+msgstr ""
+
 msgid "Router Advertisement-Service"
 msgstr ""
 
@@ -2081,6 +2161,14 @@ msgstr "掛載這個設備前先跑系統檢查"
 msgid "Run filesystem check"
 msgstr "執行系統檢查"
 
+msgid ""
+"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
+"use 6in4 instead"
+msgstr ""
+
+msgid "SIXXS-handle[/Tunnel-ID]"
+msgstr ""
+
 msgid "SSH Access"
 msgstr "SSH存取"
 
@@ -2128,6 +2216,17 @@ msgstr "分隔WDS中繼"
 msgid "Server Settings"
 msgstr "伺服器設定值"
 
+msgid "Server password"
+msgstr ""
+
+msgid ""
+"Server password, enter the specific password of the tunnel when the username "
+"contains the tunnel ID"
+msgstr ""
+
+msgid "Server username"
+msgstr ""
+
 msgid "Service Name"
 msgstr "服務名稱"
 
@@ -2201,6 +2300,9 @@ msgstr "分類"
 msgid "Source"
 msgstr "來源"
 
+msgid "Source routing"
+msgstr ""
+
 msgid "Specifies the button state to handle"
 msgstr "指定這個按鈕狀態以便操作"
 
@@ -2447,6 +2549,11 @@ msgstr ""
 "要更新你電腦的位址以便再連設備, 端看你的設定. "
 
 msgid ""
+"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
+"AYIYA"
+msgstr ""
+
+msgid ""
 "The uploaded image file does not contain a supported format. Make sure that "
 "you choose the generic image format for your platform."
 msgstr ""
@@ -2590,6 +2697,15 @@ msgstr "通道介面"
 msgid "Tunnel Link"
 msgstr ""
 
+msgid "Tunnel broker protocol"
+msgstr ""
+
+msgid "Tunnel setup server"
+msgstr ""
+
+msgid "Tunnel type"
+msgstr ""
+
 msgid "Turbo Mode"
 msgstr "渦輪爆衝模式"
 
@@ -2670,8 +2786,11 @@ msgstr "在通道介面上使用的MTU數值"
 msgid "Use TTL on tunnel interface"
 msgstr "在通道介面上使用的TTL存活時間"
 
-msgid "Use as root filesystem"
-msgstr "當作root檔案系統"
+msgid "Use as external overlay (/overlay)"
+msgstr ""
+
+msgid "Use as root filesystem (/)"
+msgstr ""
 
 msgid "Use broadcast flag"
 msgstr "當作廣播旗標"
@@ -2707,6 +2826,12 @@ msgstr "已使用"
 msgid "Used Key Slot"
 msgstr "已使用的關鍵插槽"
 
+msgid "User certificate (PEM encoded)"
+msgstr ""
+
+msgid "User key (PEM encoded)"
+msgstr ""
+
 msgid "Username"
 msgstr "用戶名稱"
 
@@ -2725,9 +2850,21 @@ msgstr "VLAN 在 %q (%s)"
 msgid "VPN Server"
 msgstr "VPN伺服器"
 
+msgid "VPN Server port"
+msgstr ""
+
+msgid "VPN Server's certificate SHA1 hash"
+msgstr ""
+
 msgid "Vendor Class to send when requesting DHCP"
 msgstr "當請求DHCP封包時要傳送的製造商類別碼"
 
+msgid "Verbose"
+msgstr ""
+
+msgid "Verbose logging by aiccu daemon"
+msgstr ""
+
 msgid "Verify"
 msgstr "確認"
 
@@ -2759,6 +2896,10 @@ msgstr ""
 "WPA-加密需要 wpa_supplican(終端模式)或者hostapd熱點(對AP或者是 ad-hoc模式)已"
 "被安裝."
 
+msgid ""
+"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
+msgstr ""
+
 msgid "Waiting for changes to be applied..."
 msgstr "等待修改被啟用..."
 
@@ -2771,6 +2912,15 @@ msgstr "警告"
 msgid "Warning: There are unsaved changes that will be lost while rebooting!"
 msgstr "警告:重開機後某些未存檔的修改將會漏失!"
 
+msgid "Whether to create an IPv6 default route over the tunnel"
+msgstr ""
+
+msgid "Whether to route only packets from delegated prefixes"
+msgstr ""
+
+msgid "Width"
+msgstr ""
+
 msgid "Wifi"
 msgstr "WIFI無線"
 
@@ -2825,6 +2975,12 @@ msgid ""
 "You must enable Java Script in your browser or LuCI will not work properly."
 msgstr "在瀏覽器你必須啟用Java Script否則LuCI無法正常運作."
 
+msgid ""
+"Your Internet Explorer is too old to display this page correctly. Please "
+"upgrade it to at least version 7 or use another browser like Firefox, Opera "
+"or Safari."
+msgstr ""
+
 msgid "any"
 msgstr "任意"
 
@@ -2904,6 +3060,12 @@ msgstr "kbit/s"
 msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
 msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr> 檔案"
 
+msgid "minimum 1280, maximum 1480"
+msgstr ""
+
+msgid "navigation Navigation"
+msgstr ""
+
 msgid "no"
 msgstr "無"
 
@@ -2913,6 +3075,9 @@ msgstr "無連線"
 msgid "none"
 msgstr "無"
 
+msgid "not present"
+msgstr ""
+
 msgid "off"
 msgstr "關閉"
 
@@ -2922,6 +3087,9 @@ msgstr "開啟"
 msgid "open"
 msgstr "打開"
 
+msgid "overlay"
+msgstr ""
+
 msgid "relay mode"
 msgstr ""
 
@@ -2931,6 +3099,12 @@ msgstr "路由"
 msgid "server mode"
 msgstr ""
 
+msgid "skiplink1 Skip to navigation"
+msgstr ""
+
+msgid "skiplink2 Skip to content"
+msgstr ""
+
 msgid "stateful-only"
 msgstr ""
 
@@ -2964,6 +3138,30 @@ msgstr "是的"
 msgid "« Back"
 msgstr "« 倒退"
 
+#~ msgid ""
+#~ "Always use 40MHz channels even if the secondary channel overlaps. Using "
+#~ "this option does not comply with IEEE 802.11n-2009!"
+#~ msgstr ""
+#~ "強制啟用40MHz頻寬並忽略輔助通道重疊。此選項不相容於IEEE 802.11n-2009!"
+
+#~ msgid "Cached"
+#~ msgstr "已快取"
+
+#~ msgid "Configures this mount as overlay storage for block-extroot"
+#~ msgstr "要採用block-extroot功能,設定這個掛載點當作覆蓋儲存"
+
+#~ msgid "Force 40MHz mode"
+#~ msgstr "強制40MHz模式"
+
+#~ msgid "Frequency Hopping"
+#~ msgstr "跳頻"
+
+#~ msgid "Locked to channel %d used by %s"
+#~ msgstr "鎖定通道 由 %s 使用的 %d "
+
+#~ msgid "Use as root filesystem"
+#~ msgstr "當作root檔案系統"
+
 #~ msgid "HE.net user ID"
 #~ msgstr "HE.net用戶識別碼ID"