Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

2 files changed, 526 insertions, 0 deletions

diff --git a/libs/luci-lib-nixio/axTLS/bindings/csharp/Makefile b/libs/luci-lib-nixio/axTLS/bindings/csharp/Makefile
new file mode 100644
index 0000000000..3414f85621
--- /dev/null
+++ b/libs/luci-lib-nixio/axTLS/bindings/csharp/Makefile
@@ -0,0 +1,35 @@
+#
+# Copyright (c) 2007, Cameron Rich
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# * Neither the name of the axTLS project nor the names of its
+#   contributors may be used to endorse or promote products derived
+#   from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
+# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+include ../../config/.config
+include ../../config/makefile.conf
+
+clean::
+	@rm -f axssl* axInterface.cs
diff --git a/libs/luci-lib-nixio/axTLS/bindings/csharp/axTLS.cs b/libs/luci-lib-nixio/axTLS/bindings/csharp/axTLS.cs
new file mode 100644
index 0000000000..cf64a256e7
--- /dev/null
+++ b/libs/luci-lib-nixio/axTLS/bindings/csharp/axTLS.cs
@@ -0,0 +1,491 @@
+/*
+ * Copyright (c) 2007, Cameron Rich
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without 
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, 
+ *   this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright notice, 
+ *   this list of conditions and the following disclaimer in the documentation 
+ *   and/or other materials provided with the distribution.
+ * * Neither the name of the axTLS project nor the names of its contributors 
+ *   may be used to endorse or promote products derived from this software 
+ *   without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * A wrapper around the unmanaged interface to give a semi-decent C# API
+ */
+
+using System;
+using System.Runtime.InteropServices;
+using System.Net.Sockets;
+
+/**
+ * @defgroup csharp_api C# API.
+ *
+ * Ensure that the appropriate Dispose() methods are called when finished with
+ * various objects - otherwise memory leaks will result.
+ * @{
+ */
+namespace axTLS
+{
+    /**
+     * @class SSL
+     * @ingroup csharp_api 
+     * @brief A representation of an SSL connection.
+     */
+    public class SSL
+    {
+        public IntPtr m_ssl;    /**< A pointer to the real SSL type */
+
+        /**
+         * @brief Store the reference to an SSL context.
+         * @param ip [in] A reference to an SSL object.
+         */
+        public SSL(IntPtr ip)
+        {
+            m_ssl = ip;
+        }
+
+        /**
+         * @brief Free any used resources on this connection. 
+         * 
+         * A "Close Notify" message is sent on this connection (if possible). 
+         * It is up to the application to close the socket.
+         */
+        public void Dispose()
+        {
+            axtls.ssl_free(m_ssl);
+        }
+
+        /**
+         * @brief Return the result of a handshake.
+         * @return SSL_OK if the handshake is complete and ok.
+         * @see ssl.h for the error code list.
+         */
+        public int HandshakeStatus()
+        {
+            return axtls.ssl_handshake_status(m_ssl);
+        }
+
+        /**
+         * @brief Return the SSL cipher id.
+         * @return The cipher id which is one of:
+         * - SSL_AES128_SHA (0x2f)
+         * - SSL_AES256_SHA (0x35)
+         * - SSL_RC4_128_SHA (0x05)
+         * - SSL_RC4_128_MD5 (0x04)
+         */
+        public byte GetCipherId()
+        {
+            return axtls.ssl_get_cipher_id(m_ssl);
+        }
+
+        /**
+         * @brief Get the session id for a handshake. 
+         * 
+         * This will be a 32 byte sequence and is available after the first
+         * handshaking messages are sent.
+         * @return The session id as a 32 byte sequence.
+         * @note A SSLv23 handshake may have only 16 valid bytes.
+         */
+        public byte[] GetSessionId()
+        {
+            IntPtr ptr = axtls.ssl_get_session_id(m_ssl);
+            byte sess_id_size = axtls.ssl_get_session_id_size(m_ssl);
+            byte[] result = new byte[sess_id_size];
+            Marshal.Copy(ptr, result, 0, sess_id_size);
+            return result;
+        }
+
+        /**
+         * @brief Retrieve an X.509 distinguished name component.
+         * 
+         * When a handshake is complete and a certificate has been exchanged, 
+         * then the details of the remote certificate can be retrieved.
+         *
+         * This will usually be used by a client to check that the server's 
+         * common name matches the URL.
+         *
+         * A full handshake needs to occur for this call to work.
+         *
+         * @param component [in] one of:
+         * - SSL_X509_CERT_COMMON_NAME
+         * - SSL_X509_CERT_ORGANIZATION
+         * - SSL_X509_CERT_ORGANIZATIONAL_NAME
+         * - SSL_X509_CA_CERT_COMMON_NAME
+         * - SSL_X509_CA_CERT_ORGANIZATION
+         * - SSL_X509_CA_CERT_ORGANIZATIONAL_NAME
+         * @return The appropriate string (or null if not defined)
+         */
+        public string GetCertificateDN(int component)
+        {
+            return axtls.ssl_get_cert_dn(m_ssl, component);
+        }
+    }
+
+    /**
+     * @class SSLUtil
+     * @ingroup csharp_api 
+     * @brief Some global helper functions.
+     */
+    public class SSLUtil
+    {
+
+        /**
+         * @brief Return the build mode of the axTLS project.
+         * @return The build mode is one of:
+         * - SSL_BUILD_SERVER_ONLY
+         * - SSL_BUILD_ENABLE_VERIFICATION
+         * - SSL_BUILD_ENABLE_CLIENT
+         * - SSL_BUILD_FULL_MODE
+         */
+        public static int BuildMode()
+        {
+            return axtls.ssl_get_config(axtls.SSL_BUILD_MODE);
+        }
+
+        /**
+         * @brief Return the number of chained certificates that the 
+         * client/server supports.
+         * @return The number of supported server certificates.
+         */
+        public static int MaxCerts()
+        {
+            return axtls.ssl_get_config(axtls.SSL_MAX_CERT_CFG_OFFSET);
+        }
+
+        /**
+         * @brief Return the number of CA certificates that the client/server
+         * supports.
+         * @return The number of supported CA certificates.
+         */
+        public static int MaxCACerts()
+        {
+            return axtls.ssl_get_config(axtls.SSL_MAX_CA_CERT_CFG_OFFSET);
+        }
+
+        /**
+         * @brief Indicate if PEM is supported.
+         * @return true if PEM supported.
+         */
+        public static bool HasPEM()
+        {
+            return axtls.ssl_get_config(axtls.SSL_HAS_PEM) > 0 ? true : false;
+        }
+
+        /**
+         * @brief Display the text string of the error.
+         * @param error_code [in] The integer error code.
+         */
+        public static void DisplayError(int error_code)
+        {
+            axtls.ssl_display_error(error_code);
+        }
+
+        /**
+         * @brief Return the version of the axTLS project.
+         */
+        public static string Version()
+        {
+            return axtls.ssl_version();
+        }
+    }
+
+    /**
+     * @class SSLCTX
+     * @ingroup csharp_api 
+     * @brief A base object for SSLServer/SSLClient.
+     */
+    public class SSLCTX
+    {
+        /**
+         * @brief A reference to the real client/server context.
+         */
+        protected IntPtr m_ctx;
+
+        /**
+         * @brief Establish a new client/server context.
+         *
+         * This function is called before any client/server SSL connections are 
+         * made.  If multiple threads are used, then each thread will have its 
+         * own SSLCTX context. Any number of connections may be made with a 
+         * single context. 
+         *
+         * Each new connection will use the this context's private key and 
+         * certificate chain. If a different certificate chain is required, 
+         * then a different context needs to be be used.
+         *
+         * @param options [in]  Any particular options. At present the options
+         * supported are:
+         * - SSL_SERVER_VERIFY_LATER (client only): Don't stop a handshake if 
+         * the server authentication fails. The certificate can be 
+         * authenticated later with a call to VerifyCert().
+         * - SSL_CLIENT_AUTHENTICATION (server only): Enforce client 
+         * authentication i.e. each handshake will include a "certificate 
+         * request" message from the server.
+         * - SSL_DISPLAY_BYTES (full mode build only): Display the byte 
+         * sequences during the handshake.
+         * - SSL_DISPLAY_STATES (full mode build only): Display the state 
+         * changes during the handshake.
+         * - SSL_DISPLAY_CERTS (full mode build only): Display the 
+         * certificates that are passed during a handshake.
+         * - SSL_DISPLAY_RSA (full mode build only): Display the RSA key 
+         * details that are passed during a handshake.
+         * @param num_sessions [in] The number of sessions to be used for 
+         * session caching. If this value is 0, then there is no session 
+         * caching.
+         * @return A client/server context.
+         */
+        protected SSLCTX(uint options, int num_sessions)
+        {
+            m_ctx = axtls.ssl_ctx_new(options, num_sessions);
+        }
+
+        /**
+         * @brief Remove a client/server context.
+         *
+         * Frees any used resources used by this context. Each connection will 
+         * be sent a "Close Notify" alert (if possible).
+         */
+        public void Dispose()
+        {
+            axtls.ssl_ctx_free(m_ctx);
+        }
+
+        /**
+         * @brief Read the SSL data stream.
+         * @param ssl [in] An SSL object reference.
+         * @param in_data [out] After a successful read, the decrypted data 
+         * will be here. It will be null otherwise.
+         * @return The number of decrypted bytes:
+         * - if > 0, then the handshaking is complete and we are returning the 
+         * number of decrypted bytes. 
+         * - SSL_OK if the handshaking stage is successful (but not yet 
+         * complete).  
+         * - < 0 if an error.
+         * @see ssl.h for the error code list.
+         * @note Use in_data before doing any successive ssl calls.
+         */
+        public int Read(SSL ssl, out byte[] in_data)
+        {
+            IntPtr ptr = IntPtr.Zero;
+            int ret = axtls.ssl_read(ssl.m_ssl, ref ptr);
+
+            if (ret > axtls.SSL_OK)
+            {
+                in_data = new byte[ret];
+                Marshal.Copy(ptr, in_data, 0, ret);
+            }
+            else
+            {
+                in_data = null;
+            }
+
+            return ret;
+        }
+
+        /**
+         * @brief Write to the SSL data stream.
+         * @param ssl [in] An SSL obect reference.
+         * @param out_data [in] The data to be written
+         * @return The number of bytes sent, or if < 0 if an error.
+         * @see ssl.h for the error code list.
+         */
+        public int Write(SSL ssl, byte[] out_data)
+        {
+            return axtls.ssl_write(ssl.m_ssl, out_data, out_data.Length);
+        }
+
+        /**
+         * @brief Write to the SSL data stream.
+         * @param ssl [in] An SSL obect reference.
+         * @param out_data [in] The data to be written
+         * @param out_len [in] The number of bytes to be written
+         * @return The number of bytes sent, or if < 0 if an error.
+         * @see ssl.h for the error code list.
+         */
+        public int Write(SSL ssl, byte[] out_data, int out_len)
+        {
+            return axtls.ssl_write(ssl.m_ssl, out_data, out_len);
+        }
+
+        /**
+         * @brief Find an ssl object based on a Socket reference.
+         *
+         * Goes through the list of SSL objects maintained in a client/server 
+         * context to look for a socket match.
+         * @param s [in] A reference to a <A HREF="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrfsystemnetsocketssocketclasstopic.asp">Socket</A> object.
+         * @return A reference to the SSL object. Returns null if the object 
+         * could not be found.
+         */
+        public SSL Find(Socket s)
+        {
+            int client_fd = s.Handle.ToInt32();
+            return new SSL(axtls.  ssl_find(m_ctx, client_fd));
+        }
+
+        /**
+         * @brief Authenticate a received certificate.
+         * 
+         * This call is usually made by a client after a handshake is complete 
+         * and the context is in SSL_SERVER_VERIFY_LATER mode.
+         * @param ssl [in] An SSL object reference.
+         * @return SSL_OK if the certificate is verified.
+         */
+        public int VerifyCert(SSL ssl)
+        {
+            return axtls.ssl_verify_cert(ssl.m_ssl);
+        }
+
+        /**
+         * @brief Force the client to perform its handshake again.
+         *
+         * For a client this involves sending another "client hello" message.
+         * For the server is means sending a "hello request" message.
+         *
+         * This is a blocking call on the client (until the handshake 
+         * completes).
+         * @param ssl [in] An SSL object reference.
+         * @return SSL_OK if renegotiation instantiation was ok
+         */
+        public int Renegotiate(SSL ssl)
+        {
+            return axtls.ssl_renegotiate(ssl.m_ssl);
+        }
+
+        /**
+         * @brief Load a file into memory that is in binary DER or ASCII PEM 
+         * format.
+         *
+         * These are temporary objects that are used to load private keys,
+         * certificates etc into memory.
+         * @param obj_type [in] The format of the file. Can be one of:
+         * - SSL_OBJ_X509_CERT (no password required)
+         * - SSL_OBJ_X509_CACERT (no password required)
+         * - SSL_OBJ_RSA_KEY (AES128/AES256 PEM encryption supported)
+         * - SSL_OBJ_P8 (RC4-128 encrypted data supported)
+         * - SSL_OBJ_P12 (RC4-128 encrypted data supported)
+         *
+         * PEM files are automatically detected (if supported).
+         * @param filename [in] The location of a file in DER/PEM format.
+         * @param password [in] The password used. Can be null if not required.
+         * @return SSL_OK if all ok
+         */
+        public int ObjLoad(int obj_type, string filename, string password)
+        {
+            return axtls.ssl_obj_load(m_ctx, obj_type, filename, password);
+        }
+
+        /**
+         * @brief Transfer binary data into the object loader.
+         *
+         * These are temporary objects that are used to load private keys,
+         * certificates etc into memory.
+         * @param obj_type [in] The format of the memory data.
+         * @param data [in] The binary data to be loaded.
+         * @param len [in] The amount of data to be loaded.
+         * @param password [in] The password used. Can be null if not required.
+         * @return SSL_OK if all ok
+         */
+        public int ObjLoad(int obj_type, byte[] data, int len, string password)
+        {
+            return axtls.ssl_obj_memory_load(m_ctx, obj_type, 
+                                            data, len, password);
+        }
+    }
+
+    /**
+     * @class SSLServer
+     * @ingroup csharp_api 
+     * @brief The server context.
+     *
+     * All server connections are started within a server context.
+     */
+    public class SSLServer : SSLCTX
+    {
+        /**
+         * @brief Start a new server context.
+         * 
+         * @see SSLCTX for details.
+         */
+        public SSLServer(uint options, int num_sessions) :
+                            base(options, num_sessions) {}
+
+        /**
+         * @brief Establish a new SSL connection to an SSL client.
+         *
+         * It is up to the application to establish the initial socket 
+         * connection.
+         *
+         * Call Dispose() when the connection is to be removed.
+         * @param s [in] A reference to a <A HREF="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrfsystemnetsocketssocketclasstopic.asp">Socket</A> object.
+         * @return An SSL object reference.
+         */
+        public SSL Connect(Socket s)
+        {
+            int client_fd = s.Handle.ToInt32();
+            return new SSL(axtls.ssl_server_new(m_ctx, client_fd));
+        }
+    }
+
+    /**
+     * @class SSLClient
+     * @ingroup csharp_api
+     * @brief The client context.
+     *
+     * All client connections are started within a client context.
+     */
+    public class SSLClient : SSLCTX
+    {
+        /**
+         * @brief Start a new client context.
+         * 
+         * @see SSLCTX for details.
+         */
+        public SSLClient(uint options, int num_sessions) :
+                        base(options, num_sessions) {}
+
+        /**
+         * @brief Establish a new SSL connection to an SSL server.
+         *
+         * It is up to the application to establish the initial socket 
+         * connection.
+         *
+         * This is a blocking call - it will finish when the handshake is 
+         * complete (or has failed).
+         *
+         * Call Dispose() when the connection is to be removed.
+         * @param s [in] A reference to a <A HREF="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrfsystemnetsocketssocketclasstopic.asp">Socket</A> object.
+         * @param session_id [in] A 32 byte session id for session resumption. 
+         * This can be null if no session resumption is not required.
+         * @return An SSL object reference. Use SSL.handshakeStatus() to check 
+         * if a handshake succeeded.
+         */
+        public SSL Connect(Socket s, byte[] session_id)
+        {
+            int client_fd = s.Handle.ToInt32();
+            byte sess_id_size = (byte)(session_id != null ? 
+                                session_id.Length : 0);
+            return new SSL(axtls.ssl_client_new(m_ctx, client_fd, session_id,
+                        sess_id_size));
+        }
+    }
+}
+/** @} */