Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 153 insertions, 0 deletions

diff --git a/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua b/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua
new file mode 100644
index 0000000000..9ff2ed97fe
--- /dev/null
+++ b/applications/luci-app-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua
@@ -0,0 +1,153 @@
+--[[
+    Copyright 2011 Iordan Iordanov <iiordanov (AT) gmail.com>
+
+    This file is part of luci-pbx-voicemail.
+
+    luci-pbx-voicemail is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    luci-pbx-voicemail is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with luci-pbx-voicemail.  If not, see <http://www.gnu.org/licenses/>.
+]]--
+
+if     nixio.fs.access("/etc/init.d/asterisk")   then
+   server = "asterisk"
+elseif nixio.fs.access("/etc/init.d/freeswitch") then
+   server = "freeswitch"
+else
+   server = ""
+end
+
+modulename = "pbx-voicemail"
+vmlogfile  = "/tmp/last_sent_voicemail.log"
+
+m = Map (modulename, translate("Voicemail Setup"),
+         translate("Here you can configure a global voicemail for this PBX. Since this system is \
+         intended to run on embedded systems like routers, there is no local storage of voicemail - \
+         it must be sent out by email. Therefore you need to configure an outgoing mail (SMTP) server \
+         (for example your ISP's, Google's, or Yahoo's SMTP server), and provide a list of \
+         addresses that receive recorded voicemail."))
+
+-- Recreate the config, and restart services after changes are commited to the configuration.
+function m.on_after_commit(self)
+        luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+        luci.sys.call("/etc/init.d/"     .. server .. " restart 1\>/dev/null 2\>/dev/null")
+end
+
+
+----------------------------------------------------------------------------------------------------
+s = m:section(NamedSection, "global_voicemail", "voicemail", translate("Global Voicemail Setup"),
+              translate("When you enable voicemail, you will have the opportunity to specify \
+              email addresses that receive recorded voicemail. You must also set up an SMTP server below."))
+s.anonymous = true
+
+enable = s:option(ListValue, "enabled", translate("Enable Voicemail"))
+enable:value("yes", translate("Yes"))
+enable:value("no",  translate("No"))
+enable.default = "no"
+
+emails = s:option(DynamicList, "global_email_addresses",
+                  translate("Email Addresses that Receive Voicemail"))
+emails:depends("enabled", "yes")
+
+savepath = s:option(Value, "global_save_path", translate("Local Storage Directory"),
+                    translate("You can also retain copies of voicemail messages on the device running \
+                              your PBX. The path specified here will be created if it doesn't exist. \
+                              Beware of limited space on embedded devices like routers, and enable this \
+                              option only if you know what you are doing."))
+savepath.optional = true
+
+if     nixio.fs.access("/etc/pbx-voicemail/recordings/greeting.gsm")   then
+   m1 = s:option(DummyValue, "_m1")
+   m1:depends("enabled", "yes")
+   m1.default = "NOTE: Found a voicemail greeting. To check or change your voicemail greeting, dial *789 \
+                 and the system will play back your current greeting. After that, a long beep will sound and \
+                 you can press * in order to record a new message. Hang up to avoid recording a message. \
+                 If you press *, a second long beep will sound, and you can record a new greeting. \
+                 Hang up or press # to stop recording. When # is pressed the system will play back the \
+                 new greeting."
+else
+   m1 = s:option(DummyValue, "_m1")
+   m1:depends("enabled", "yes")
+   m1.default = "WARNING: Could not find voicemail greeting. Callers will hear only a beep before \
+                 recording starts. To record a greeting, dial *789, and press * after the long beep. \
+                 If you press *, a second long beep will sound, and you can record a new greeting. \
+                 Hang up or press # to stop recording. When # is pressed the system will play back the \
+                 new greeting."
+end
+
+
+----------------------------------------------------------------------------------------------------
+s = m:section(NamedSection, "voicemail_smtp", "voicemail", translate("Outgoing mail (SMTP) Server"),
+              translate("In order for this PBX to send emails containing voicemail recordings, you need to \
+              set up an SMTP server here. Your ISP usually provides an SMTP server for that purpose. \
+              You can also set up a third party SMTP server such as the one provided by Google or Yahoo."))
+s.anonymous = true
+
+serv = s:option(Value, "smtp_server", translate("SMTP Server Hostname or IP Address"))
+serv.datatype = "host"
+
+port = s:option(Value, "smtp_port", translate("SMTP Port Number"))
+port.datatype = "port"
+port.default = "25"
+
+tls = s:option(ListValue, "smtp_tls", translate("Secure Connection Using TLS"))
+tls:value("on",  translate("Yes"))
+tls:value("off", translate("No"))
+tls.default = "on"
+
+auth = s:option(ListValue, "smtp_auth", translate("SMTP Server Authentication"))
+auth:value("on",  translate("Yes"))
+auth:value("off", translate("No"))
+auth.default = "off"
+
+user = s:option(Value, "smtp_user", translate("SMTP User Name"))
+user:depends("smtp_auth", "on")
+
+pwd = s:option(Value, "smtp_password", translate("SMTP Password"),
+               translate("Your real SMTP password is not shown for your protection. It will be changed \
+                         only when you change the value in this box."))
+pwd.password = true
+pwd:depends("smtp_auth", "on")
+                            
+-- We skip reading off the saved value and return nothing.
+function pwd.cfgvalue(self, section)
+   return "Password Not Displayed"
+end
+   
+-- We check the entered value against the saved one, and only write if the entered value is
+-- something other than the empty string, and it differes from the saved value.
+function pwd.write(self, section, value)
+   local orig_pwd = m:get(section, self.option)
+   if value == "Password Not Displayed" then value = "" end
+   if value and #value > 0 and orig_pwd ~= value then
+      Value.write(self, section, value)
+   end
+end
+
+----------------------------------------------------------------------------------------------------
+s = m:section(NamedSection, "voicemail_log", "voicemail", translate("Last Sent Voicemail Log"))
+s.anonymous = true
+
+s:option (DummyValue, "vmlog")
+
+sts = s:option(DummyValue, "_sts") 
+sts.template = "cbi/tvalue"
+sts.rows = 5
+
+function sts.cfgvalue(self, section)
+   log = nixio.fs.readfile(vmlogfile)
+   if log == nil or log == "" then
+      log = "No errors or messages reported."
+   end
+   return log
+end
+
+return m