summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2018-06-23potential - Found a bug in the python testsJeff Bean
2018-06-13table: support AfiSafiIn Policy Condition matchMarcin Ptaszyński
2018-05-30graceful_restart_test: Confirm stale paths removedIWASE Yusuke
This patch adds checks to confirm the stale paths are also removed from the adj-RIB-in table. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-30graceful_restart_test: Assert timer not expiredIWASE Yusuke
This patch fixes to assert the Graceful Restart time is not expired while waiting for re-establishing peer connection. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-30scenario_test: Extend Graceful Restart timeIWASE Yusuke
The current Graceful Restart time is 20 sec, but this value is not enough long and can be exceeded unexpectedly while waiting for re-establishing peer connections. Then the stale paths on a receiving router are dropped before the paths successfully synced, and some test cases on "graceful_restart_test.py" will be passed unexpectedly. This patch extends the Graceful Restart time to 30 sec and introduces the constants for Graceful Restart time and Long-Lived Graceful Restart time. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-29bgp_zebra_nht_test: Test case to sync nexthop statesIWASE Yusuke
This patch adds a test case to test if the path, which came after the NEXTHOP_UPDATE message was received from Zebra, is updated by reflecting the nexthop cache. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-28table: update accepted number in adj-in rib after softreset-inFUJITA Tomonori
update accepted number in adj-in rib after AllowOwnAs has changed. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-28test/aspath: check accepted and received numbersFUJITA Tomonori
make sure that an adj-rib return the accepted and received numbers when it has an as-looped path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-28rtc_test: Test cases for infinite RTC UPDATE loopIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-28rtc_test: Test cases for inter-ASIWASE Yusuke
This patch adds test cases for the Route Target Constraint of the inter-AS route distribution and combination of the inter-AS and intra-AS route distribution. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-28rtc_test: Enhance test cases for intra-AS RTCIWASE Yusuke
This patch adds assertion points for the counts of advertised and received routes. Also adds comments for the states of VRFs and routes. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-24server: Withdraw routes when received RTM withdrawalIWASE Yusuke
Because the RTM is removed from adj-RIB-in before collecting the candidate routes to be withdrawn, the candidates are unexpectedly filtered before sending withdraw messages. Then on the peers, the VPN routes are left on. This patch fixes to selects candidates from the filtered paths and send withdraw messages as expected. Also resolves the TODO in "test/scenario_test/rtc_test.py". Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-24test/rtc: Add test for conflict RTC configSatoshi Fujimoto
Add test for the issue reported on #1682 (https://github.com/osrg/gobgp/issues/1682). Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-05-23bgp_zebra_nht_test: Test cases when nexthop unreachableIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-23bgp_zebra_nht_test: Improve pylint resultIWASE Yusuke
Also removes a debug print. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-23bgp_zebra_nht_test: Use utility functions of test/libIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-21test/lib/quagga: Minimize advertisement-intervalIWASE Yusuke
Quagga seems to advertise routes to neighbors by intervals of 30 seconds (eBGP) or 5 seconds (iBGP) by default. Because of this delay, timer in "bgp_confederation_test.py", 60 seconds, can be exceeded when the UPDATE messages need to go through multi ASs. This patch fixes to use minimum advertisement-interval and reduces the time of test cases. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-21bgp_confederation_test: Improve pylint resultIWASE Yusuke
Also removes a debug print Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-21bgp_router_test: Retry assertions of RIB for stabilityIWASE Yusuke
To improve the stability of "bgp_router_test.py", this patch fixes to retry assertions of RIB on a Quagga router after shutting down a neighbor. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-15scenario_test: Wait for GoBGP starting upIWASE Yusuke
For the stability of some scenario tests, this patch fixes to wait for GoBGP starting up after restarting GoBGP daemon. Currently, there are cases that CLI command can be called without checking whether GoBGP daemon is surely started or not. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-15test/lib/gobgp: Rename graceful_restart() to stop_gobgp()IWASE Yusuke
GoBGPContainer.graceful_restart() does not "restart" GoBGP daemon, but just stops (kills) GoBGP daemon. Then this patch renames graceful_restart() to stop_gobgp() to avoid confusion. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-15graceful_restart_test: Remove redundant parenthesesIWASE Yusuke
Improves pylint result. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-10test: avoid fabric version 2.0FUJITA Tomonori
Seems that fabric v2 doesn't work with the current files. Let's keep using v1.X for now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07use sorted single master table for route server setupFUJITA Tomonori
https://github.com/osrg/gobgp/issues/1249 The IN policy was removed. The modification by the IMPORT policy are visible to all route server peers. This saves some dozens bytes memory per a path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-04-18rtc_test: Add a TODO commentIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-13rtc_test: Add description for topologiesIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-13test_rtc: Use assertEqual for better log messageIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-02*.md: Improvements for markdownlintIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-21table: fix handleMacMobility()FUJITA Tomonori
needs to find a diffrent ESI with the same mac address. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-02-10flow_spec_test: Enhance test cases with ExaBGPIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-10test/lib/exabgp: Enable to get adj-RIB-{in,out}IWASE Yusuke
"exabgpcli" supports to show adj-RIB-in and adj-RIB-out, this patch enables ExaBGPContainer to get these RIBs information. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-10test/lib/exabgp: Use exabgpcli to add/del routesIWASE Yusuke
Currently, to advertise or withdraw routes with ExaBGPContainer, we need to configure static routes via config file and restart ExaBGP daemon. In other words, we can NOT send withdrawing advertisement with ExaBGPContainer. Also, restating ExaBGP daemon frequently can make scenario test unstable, and it should be avoided. On the other hand, with ExaBGP version 4.0.5 or later(*), we can advertise or withdraw routes using "exabgpcli" without restating ExaBGP daemon (or writing application which calls ExaBGP's APIs). This patch fixes to use "exabgpcli" and reduces the number of restating ExaBGP daemon. Note: According to this change, adding routes into ExaBGP should be called after adding neighbor. (*): "exabgpcli" is introduced at version 4.0.2, but has some bugs related to Python 3 compatibility and FlowSpec rules combinations, then we need to use version 4.0.5 or later. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-27scenario_test: Enable to try assertion several timesIWASE Yusuke
Some times, on Travis-CI, some test cases fail unexpectedly in checking paths in RIBs due to advertisements are not yet received from other routers. Currently, in order to avoid this unexpected result, "time.sleep" is inserted after adding new routes, but it is not enough. This patch introduces a new function to enable to do assertion several times and avoid failure with the first assertion. Note: This patch does not introduces this change into all test cases, do only into some test cases which fail relatively frequently. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-27test/lib/gobgp: Adding routes without reloadingIWASE Yusuke
With the current implementation, when adding routes on GoBGPContainer, we re-configure and reload daemon, then add routes using CLI command. Differ from QuaggaBGPContainer, when deletion of routes, reloading is not required, but if reloading daemon frequently, we need to wait for the daemon restarting, it causes testing time longer and unstable. This patch enables to add routes without reloading daemon. Note: According to this change, adding routes should be called after starting daemons. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-27test/lib/Quagga: Use vtysh to add/del routesIWASE Yusuke
Currently, to advertise or withdraw routes on QuaggaBGPContainer, we need to configure static routes in configure file and restart Quagga daemons. In other words, we can NOT send withdrawing advertisement from Quagga side. Also, restating Quagga daemons frequently can make scenario test unstable, and it should be avoided. This patch fixes to use "vtysh" and reduces the number of restating Quagga daemons. Note: According to this change, adding routes on Quagga should be called after starting daemons. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-19test/lib/{bird,gobgp,quagga,yabgp}: Wait for daemon bootIWASE Yusuke
Currently, scenario test library does not wait for the daemons boot in containers at starting up or after sending SIGHUP for reloading new configurations. So some test cases (e.g., graceful_restart_test.py) fails occasionally to insert static routes into GoBGP after reloading new configurations. This patch fixes to wait for the daemons boot and improves the stability of scenario tests. Note: This patch does not introduce these improvements to BagpipeContainer and ExaBGPContainer, because; - Docker image for BaGPipe, which used in scenario test library, is too old and BagpipeContainer does not seem to be used in the current test cases. - The version of ExaBGP in "osrg/exabgp" Docker image has no way to ask the daemon status other than "ps" command ("ps" is already done, but not enough). If "exabgpcli" is available on ExaBGP container, which is required the next release of 4.0.2 or 3.4.21, we can use it to check whether ExaBGP is started up or not. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-19flow_spec_test: Enhance test cases with YABGPIWASE Yusuke
This patch extends test cases using YABGP; - Test "gobgp" command outputs representations with IPv4/IPv6 - IPv4 FlowSpec rules advertisements and withdraws TODO: Supports test cases for the IPv6 FlowSpec rules withdraws when YABGP supports the IPv6 FlowSpec or when ExaBGP fixes issues(*) of logging the received FlowSpec rules. (*): ExaBGP (v4.0.2 or v3.4.21) will failed to log the received FlowSpec rules which contains some specific operators/operands (e.g., "!=" or empty operator). Then, we need to wait for the next release to implement more test cases. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-19test/lib: Add YABGP containerIWASE Yusuke
Note: This implementation supposes the YABGP version 0.4.0. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-19test/lib/base: Delete FlowSpec routes with keywordIWASE Yusuke
Currently, in case of the FlowSpec routes, "prefix" value which stored on each container instance is just a keyword and not valid NLRI arguments for adding or deleting routes. So when deleting routes with "route" keyword, it is required to construct the NLRI arguments using "matchs" value. This patch enables to construct the valid NLIR arguments as "prefix" value when adding the FlowSpec routes and enables to delete the FlowSpec routes with "route" keyword. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09bgp_zebra_test: Fix ping reachability testsIWASE Yusuke
Currently, we test the ping reachability of Quagga(o1) -> GoBGP(g1) -> Quagga(q1) in this scenario test, but in this case, two Quagga routers belong to the connected networks of GoBGP router and ping will succeed without the BGP advertisements. Then, even if GoBGP failed to install the received routes to the Linux routeing table via Zebra daemon, this test case will pass. This patch fixes to test the reachability of Quagga(o1) -> GoBGP(g1) -> Quagga(q1) -> Quagga(o2) and makes the advertised routes required to be installed into the g1's routing table. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09test/lib/base: Fix typosIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09test/lib/{gobgp,quagga}: IPv6 forwarding in zebra.confIWASE Yusuke
With this patch, it is not required to enable IPv6 forwarding by using "sysctl" explicitly in Quagga or GoBGP(Zebra enabled) containers. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09test/lib/base: Removes redundant routes from hostIWASE Yusuke
When creating a new Docker network (Linux Bridge), some routes to its subnet will be installed in to the container host's routing table. This routes enable containers to communicate each other through the container host's rouging table, then causes the unexpected success of scenario tests (e.g., ping between containers). This patch removes the unexpected routes from the container host and avoid this problem. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-12-28addpath_test: Wait for re-establishment with ExaBGPIWASE Yusuke
When adding or deleting routes in ExaBGPContainer, it is required to restart ExaBGPContainer with the current implementation. This patch fixes to wait for the re-establishment with ExaBGP and improves the stability of this test case. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-12-16use label for containers and networks in order to avoid colliding with othersImcom Jin
2017-12-07test: use the current PYTHONPATH in run_all_tests.shFUJITA Tomonori
On some environments, it's necessary to use the current PYTHONPATH to run python. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-11-27test/lib: Allow unconfigured peer-as for Unnumbered BGPSatoshi Fujimoto
For Unnumbered BGP, neighbor AS number isn't needed to be specified, so 'peer-as' should not be specified in the scenario test for Unnumbered BGP. However, currently 'peer-as' is always specified in test/lib/gobgp.py This commit solves this by not specifying `peer-as` if 'neighbor-interface' is configured. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07test: Add scenario test for BGP ConfederationSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07test/lib: Add bgp config structure for GoBGP/Quagga containersSatoshi Fujimoto
This commit introduces 'bgp_config' attribute for GoBGP/Quagga containers to configure complex settings. Adding to this, this commit enables to configure BGP confederation settings to GoBGP/Quagga conrainers. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07test/lib: Enhancement on Get Rib library on QuaggaSatoshi Fujimoto
For Quagga containers, currently, when we use get_global_rib() without specifying prefix, we cannot get AS_PATH and other attributes. And when we use get_global_rib() with prefix, we can get only one path even if there is multiple paths for a destination. This commit fixes these problems by refining test/lib/quagga.py. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 10:28:04 +0000