summaryrefslogtreecommitdiffhomepage
path: root/shell
AgeCommit message (Collapse)Author
2018-12-08inetd: suppress aliasing warningDenys Vlasenko
function old new delta sigprocmask2 - 8 +8 wait_for_child_or_signal 213 218 +5 dowait 424 429 +5 block_CHLD_HUP_ALRM 62 59 -3 sigprocmask_SIG_SETMASK 16 - -16 ------------------------------------------------------------------------------ (add/remove: 1/1 grow/shrink: 2/1 up/down: 18/-19) Total: -1 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-08suppress gcc 8 aliasing warningsDenys Vlasenko
function old new delta sigprocmask_SIG_SETMASK - 16 +16 wait_for_child_or_signal 221 213 -8 dowait 432 424 -8 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-27hush: allow hush to run embedded scriptsRon Yorston
Embedded scripts require a shell to be present in the BusyBox binary. Allow either ash or hush to be used for this purpose. If both are enabled ash takes precedence. The size of the binary is unchanged in the default configuration: both ash and hush are present but support for embedded scripts isn't compiled into hush. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-20ash: reset tokpushback before prompting while parsing heredocChristoph Schulz
The parser reads from an already freed memory location, thereby causing unpredictable results, in the following situation: - ENABLE_ASH_EXPAND_PRMT is enabled - heredoc is being parsed - command substitution is used within heredoc Examples where this bug crops up are (PS2 is set to "> "): $ cat <<EOF > `echo abc` > EOF -sh: O: not found $ cat <<EOF > $(echo abc) > EOF -sh: {garbage}: not found The presumable reason is that setprompt_if() causes a nested expansion when ENABLE_ASH_EXPAND_PRMT is enabled, therefore leaving "wordtext" in an unusable state. However, when parseheredoc() is called, "tokpushback" is non-zero, which causes the next call to xxreadtoken() to return TWORD, causing the caller to use the invalid "wordtoken" instead of reading the next valid token. The call chain is: list() -> peektoken() [sets tokpushback to 1] -> parseheredoc() -> setprompt_if() -> pushstackmark() -> expandstr() -> readtoken1() [sets lasttoken to TWORD, wordtoken points to expanded prompt] -> popstackmark() [invalidates wordtoken, leaves lasttoken as is] -> readtoken1() -> ...parsebackq -> list() -> andor() -> pipeline() -> readtoken() -> xxreadtoken() [tokpushback non-zero, reuse lasttoken and wordtext] Note that in almost all other contexts, each call to setprompt_if() is preceded by setting "tokpushback" to zero. One exception is "oldstyle" backquote parsing in readtoken1(), but there "tokpushback" is reset afterwards. The other exception is nlprompt(), but this function is only used within readtoken1() (but in contexts where no nested calls to xxreadtoken() occur) and xxreadtoken() (where "tokpushback" is guaranteed to be zero). function old new delta parseheredoc 124 131 +7 Signed-off-by: Christoph Schulz <develop@kristov.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-17Treat custom and applet scripts as appletsRon Yorston
BusyBox has support for embedded shell scripts. Two types can be distinguished: custom scripts and scripts implementing applets. Custom scripts should be placed in the 'embed' directory at build time. They are given a default applet configuration and appear as applets to the user but no further configuration is possible. Applet scripts are integrated with the BusyBox build system and are intended to be used to ship standard applets that just happen to be implemented as scripts. They can be configured at build time and appear just like native applets. Such scripts should be placed in the 'applets_sh' directory. A stub C program should be written to provide the usual applet configuration details and placed in a suitable subsystem directory. It may be helpful to have a configuration option to enable any dependencies the script requires: see the 'nologin' applet for an example. function old new delta scripted_main - 41 +41 applet_names 2773 2781 +8 applet_main 1600 1604 +4 i2cdetect_main 672 674 +2 applet_suid 100 101 +1 applet_install_loc 200 201 +1 applet_flags 100 101 +1 packed_usage 33180 33179 -1 tryexec 159 152 -7 evalcommand 1661 1653 -8 script_names 9 - -9 packed_scripts 123 114 -9 complete_cmd_dir_file 826 811 -15 shellexec 271 254 -17 find_command 1007 990 -17 busybox_main 642 624 -18 run_applet_and_exit 100 78 -22 find_script_by_name 51 - -51 ------------------------------------------------------------------------------ (add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes text data bss dec hex filename 950034 477 7296 957807 e9d6f busybox_old 949918 477 7296 957691 e9cfb busybox_unstripped Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-16ash: ensure variables are fully initialised when unsetRon Yorston
When a variable is unset by calling setvar(name, NULL, 0) the code to initialise the new, empty variable fails to initialise the last character of the string. Attempts to read the contents of the unset variable will result in the uninitialised character at the end of the string being accessed. For example, running BusyBox under Valgrind and unsetting PATH: $ valgrind ./busybox_unstripped sh ==21249== Memcheck, a memory error detector ==21249== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==21249== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info ==21249== Command: ./busybox_unstripped sh ==21249== /data2/git/build_fix_8721 $ unset PATH /data2/git/build_fix_8721 $ 0 ==21249== Conditional jump or move depends on uninitialised value(s) ==21249== at 0x451371: path_advance (ash.c:2555) ==21249== by 0x456E22: find_command (ash.c:13407) ==21249== by 0x458425: evalcommand (ash.c:10139) ==21249== by 0x454CBC: evaltree (ash.c:9131) ==21249== by 0x456C80: cmdloop (ash.c:13164) Closes https://bugs.busybox.net/show_bug.cgi?id=8721 v2: On the dash mailing list Harald van Dijk was kind enough to point out a flaw in my reasoning and provide an alternative patch. Sadly his patch adds 2 bytes of bloat. Using xzalloc to zero the whole string gives a bloat of -3 bytes. function old new delta setvar 172 169 -3 Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-14hush: correct description for HUSH_TICK config optionRon Yorston
The HUSH_TICK configuration option enables command substitution, not process substitution. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-06ash: minor fixesRon Yorston
Ensure that login_sh is initialised in procargs even when running an embedded script. The argc argument to ash_main isn't unused when embedded scripts are present. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-01ash: fix thinko in last commitDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-01ash: in tryexec(), ensure we don't try to run embedded scripts as appletsRon Yorston
Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-01ash: recognize embedded scripts in SH_STANDALONE modeRon Yorston
function old new delta find_script_by_name - 51 +51 shellexec 254 271 +17 find_command 990 1007 +17 evalcommand 1653 1661 +8 doCommands 2233 2222 -11 run_applet_and_exit 128 100 -28 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 6/4 up/down: 104/-52) Total: 52 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-01claenups for previous commitDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-01ash: allow shell scripts to be embedded in the binaryDenys Vlasenko
To assist in the deployment of shell scripts it may be convenient to embed them in the BusyBox binary. 'Embed scripts in the binary' takes any files in the directory 'embed', concatenates them with null separators, compresses them and embeds them in the binary. When scripts are embedded in the binary, scripts can be run as 'busybox SCRIPT [ARGS]' or by usual (sym)link mechanism. embed/nologin is provided as an example. function old new delta packed_scripts - 123 +123 unpack_scripts - 87 +87 ash_main 1103 1171 +68 run_applet_and_exit 78 128 +50 get_script_content - 32 +32 script_names - 10 +10 expmeta 663 659 -4 ------------------------------------------------------------------------------ (add/remove: 4/0 grow/shrink: 2/1 up/down: 370/-4) Total: 366 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-14hush: tweak comment, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-11hush: add a comment on how globbing (should) workDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-07ash: expand: Do not quote backslashes in unquoted parameter expansionDenys Vlasenko
Upstream commit: Date: Wed, 28 Mar 2018 18:37:51 +0800 expand: Do not quote backslashes in unquoted parameter expansion Here is a better example: a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b dash currently prints /*/\nullx /*/\null bash prints /*/\nullx /dev/null You may argue the bash behaviour is inconsistent but it actually makes sense. What happens is that quote removal only applies to the original token as seen by the shell. It is never applied to the result of parameter expansion. Now you may ask why on earth does the second line say "/dev/null" instead of "/dev/\null". Well that's because it is not the quote removal step that removed the backslash, but the pathname expansion. The fact that the /de\v does not become /dev even though it exists is just the result of the optimisation to avoid unnecessarily calling stat(2). I have checked POSIX and I don't see anything that forbids this behaviour. So going back to dash yes I think we should adopt the bash behaviour for pathname expansion and keep the existing case semantics. This patch does exactly that. Note that this patch does not work unless you have already applied https://patchwork.kernel.org/patch/10306507/ because otherwise the optimisation mentioned above does not get detected correctly and we will end up doing quote removal twice. This patch also updates expmeta to handle naked backslashes at the end of the pattern which is now possible. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> function old new delta expmeta 618 653 +35 memtodest 146 147 +1 Tested to work with both ASH_INTERNAL_GLOB on and off. hush does not handle this correctly. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05hush: adopt ash's quote_in_varexp1.testsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash: exec: Return 126 on most errors in shellexecDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:37 +0800 exec: Return 126 on most errors in shellexec Currently when shellexec fails on most errors the shell will exit with exit status 2. This patch changes it to 126 in order to avoid ambiguities with the exit status from a successful exec. The errors that result in 127 has also been expanded to include ENOTDIR, ENAMETOOLONG and ELOOP. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> function old new delta shellexec 245 254 +9 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash: eval: Restore input files in evalcommandDenys Vlasenko
Upstream commit: Date: Tue, 27 Mar 2018 00:39:35 +0800 eval: Restore input files in evalcommand When evalcommand invokes a command that modifies parsefile and then bails out without popping the file, we need to ensure the input file is restored so that the shell can continue to execute. Reported-by: Martijn Dekker <martijn@inlv.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> function old new delta unwindfiles - 20 +20 evalcommand 1635 1653 +18 getoptscmd 584 595 +11 popallfiles 20 10 -10 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/1 up/down: 49/-10) Total: 39 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash: parser: Fix parsing of ${}Denys Vlasenko
Upstream commit: Date: Tue, 3 Apr 2018 00:40:25 +0800 parser: Fix parsing of ${} dash -c 'echo ${}' should print "Bad subtitution" but instead fails with "Syntax error: Missing '}'". This is caused by us reading an extra character beyond the right brace. This patch fixes it so that this construct only fails during expansion rather than during parsing. Fixes: 3df3edd13389 ("[PARSER] Report substition errors at...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> function old new delta readtoken1 2907 2916 +9 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash,hush: fold shell_builtin_read() way-too-many params into a struct paramDenys Vlasenko
function old new delta getoptscmd 587 584 -3 readcmd 240 224 -16 shell_builtin_read 1426 1399 -27 builtin_read 210 182 -28 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-74) Total: -74 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05hush: set IFS to default on startupDenys Vlasenko
function old new delta hush_main 1095 1110 +15 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05hush: fix fallout from FILE->HFILE conversionDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash: expand: Fix ghost fields with unquoted $@/$*Denys Vlasenko
Upstream commit: Date: Fri, 23 Mar 2018 18:58:47 +0800 expand: Fix ghost fields with unquoted $@/$* You're right. The proper fix to this is to ensure that nulonly is not set in varvalue for $*. It should only be set for $@ when it's inside double quotes. In fact there is another bug while we're playing with $@/$*. When IFS is set to a non-whitespace character such as :, $* outside quotes won't remove empty fields as it should. This patch fixes both problems. Reported-by: Martijn Dekker <martijn@inlv.org> Suggested-by: Harald van Dijk <harald@gigawatt.nl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> function old new delta argstr 1111 1113 +2 evalvar 571 569 -2 varvalue 579 576 -3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-5) Total: -3 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash: var: Set IFS to fixed value at start timeDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:43 +0800 var: Set IFS to fixed value at start time This patch forces the IFS variable to always be set to its default value, regardless of the environment. It also removes the long unused IFS_BROKEN code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-05ash: eval: Variable assignments on functions are no longer persistentDenys Vlasenko
Upstream commit: Date: Wed, 4 Apr 2018 17:54:01 +0800 eval: Variable assignments on functions are no longer persistent Dirk Fieldhouse <fieldhouse@gmx.net> wrote: > In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open > Group Technical Standard Base Specifications, Issue 7") > <http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09>, > we read under '2.9.1 Simple Commands' > > "Variable assignments shall be performed as follows: > ... > - If the command name is a standard utility implemented as a function > (see XBD Utility), the effect of variable assignments shall be as if the > utility was not implemented as a function. > ... > - If the command name is a function that is not a standard utility > implemented as a function, variable assignments shall affect the current > execution environment during the execution of the function. It is > unspecified: > > * Whether or not the variable assignments persist after the > completion of the function > > * Whether or not the variables gain the export attribute during > the execution of the function > > * Whether or not export attributes gained as a result of the > variable assignments persist after the completion of the function (if > variable assignments persist after the completion of the function)" POSIX used to require the current dash behaviour. However, you're right that this is no longer the case. This patch will remove the persistence of the variable assignment. I have considered the exporting the variables during the function execution but have decided against it because: 1) It makes the code bigger. 2) dash has never done this in the past. 3) You cannot use this portably anyway. Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> function old new delta evalcommand 1606 1635 +29 evalcase 313 317 +4 evalfun 280 268 -12 pushlocalvars 48 - -48 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 2/1 up/down: 33/-60) Total: -27 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-04ash,hush: properly handle ${v//pattern/repl} if pattern starts with /Denys Vlasenko
Closes 2695 function old new delta parse_dollar 762 790 +28 subevalvar 1258 1267 +9 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 37/0) Total: 37 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-31hush: speed up ${var:+ARG} for literal ARGsDenys Vlasenko
function old new delta first_special_char_in_vararg - 52 +52 expand_one_var 2248 2296 +48 encode_then_expand_vararg 357 336 -21 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/1 up/down: 100/-21) Total: 79 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-28hush: fix another case where empty "for" wasn't setting exitcode to 0Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-28hush: disable debug_indent increment/decrement for HUSH_DEBUG < 2 buildsDenys Vlasenko
function old new delta run_list 1063 1046 -17 parse_stream 2296 2249 -47 run_pipe 1890 1840 -50 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-114) Total: -114 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-28hush: make "set -x" output don't redirectable when fd#2 redirectedDenys Vlasenko
function old new delta x_mode_print_optionally_squoted - 120 +120 x_mode_flush - 68 +68 save_fd_on_redirect 208 243 +35 x_mode_prefix - 27 +27 x_mode_addblock - 23 +23 x_mode_addchr - 17 +17 dump_cmd_in_x_mode 110 85 -25 run_pipe 1919 1890 -29 print_optionally_squoted 145 - -145 ------------------------------------------------------------------------------ (add/remove: 5/1 grow/shrink: 1/2 up/down: 290/-199) Total: 91 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-27hush: make "set -x" output closer to bashDenys Vlasenko
function old new delta print_optionally_squoted - 145 +145 run_pipe 1902 1919 +17 dump_cmd_in_x_mode 142 110 -32 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/1 up/down: 162/-32) Total: 130 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-27hush: fix "set -x" output prefix overlapping for v="..`cmd`.." caseDenys Vlasenko
Was printing initial "+" prefix for the assignment, that printing "+ cmd" then printing the expanded " v=VAL" string. Delay printing of "+" prefix for the assignment to after expansion. function old new delta run_pipe 1883 1902 +19 builtin_eval 127 133 +6 expand_vars_to_list 1103 1106 +3 dump_cmd_in_x_mode 144 142 -2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/1 up/down: 28/-2) Total: 26 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-27hush: in some cases, expand_on_ifs() relied of uninitialized memoryDenys Vlasenko
The n > 0 check to prevent access to the last byte of non-existing argv[-1] wasn't enough. Switched to making sure there are initialized (zero) bytes there. A predictable testcase is rather hard to construct, unfortunately, contents of memory depends on allocator behavior and whatnot. function old new delta o_save_ptr_helper 119 137 +18 expand_on_ifs 345 339 -6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-6) Total: 12 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-26hush: improve set -x: make "+++" indent level increase in `cmd` and eval.Denys Vlasenko
function old new delta dump_cmd_in_x_mode 126 144 +18 run_pipe 1873 1883 +10 builtin_eval 119 127 +8 expand_vars_to_list 1100 1103 +3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/0 up/down: 39/0) Total: 39 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-24hush: fix/explain corner cases of redirection colliding with script fdDenys Vlasenko
function old new delta save_fd_on_redirect 200 208 +8 run_pipe 1870 1873 +3 setup_redirects 321 322 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 12/0) Total: 12 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-24hush: add "heredoc.tests" from ash, tweak ash "is a function" messageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-24hush: fix nested redirects colliding with script fdsDenys Vlasenko
This necessitates switch from libc FILE api to a simple homegrown replacement. The change which fixes the bug here is the deleting of restore_redirected_FILEs(); line. It was prematurely moving (restoring) script fd#3. The fix is: we don't even _want_ to restore scrit fds, we are perfectly fine with them being moved. The only reason we tried to restore them is that FILE api did not allow moving of FILE->fd. function old new delta refill_HFILE_and_getc - 93 +93 hfopen - 90 +90 hfclose - 66 +66 pseudo_exec_argv 591 597 +6 hush_main 1089 1095 +6 builtin_source 209 214 +5 save_fd_on_redirect 197 200 +3 setup_redirects 320 321 +1 fgetc_interactive 235 236 +1 i_peek_and_eat_bkslash_nl 99 97 -2 expand_vars_to_list 1103 1100 -3 restore_redirects 99 52 -47 fclose_and_forget 57 - -57 remember_FILE 63 - -63 ------------------------------------------------------------------------------ (add/remove: 3/2 grow/shrink: 6/3 up/down: 271/-172) Total: 99 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-24hush: handle backslash-newline in heredoc terminatorsDenys Vlasenko
function old new delta fetch_heredocs 479 527 +48 (ash fails this test) Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-24hush: fix handling of heredocs not enclosed in groups where they are "declared"Denys Vlasenko
function old new delta fetch_heredocs - 479 +479 parse_and_run_stream 146 148 +2 parse_stream 2787 2296 -491 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/1 up/down: 481/-491) Total: -10 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-23hush: fix heredoc handling in the "cmd <<EOF ;<newline>" caseDenys Vlasenko
function old new delta parse_stream 2759 2787 +28 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-23hush: fix handling of heredocs starting with empty linesDenys Vlasenko
function old new delta parse_stream 2748 2759 +11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: never glob result of dquoted "${v:+/bin/c*}"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: tidy up code after previous commitsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: better names for o_free_unsafe() / o_free(), no logic changesDenys Vlasenko
o_free() made o_string NULL-initialized, o_free_unsafe() did not bother reinitializing (expected caller to not need it). Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: fix handling of '' in ${var:+ARG}Denys Vlasenko
This wasn't an ash bug in dollar_altvalue9, it was hush bug (and bash!) function old new delta expand_one_var 2236 2254 +18 expand_vars_to_list 1097 1103 +6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 24/0) Total: 24 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: fix word splitting in ${v:+ARG} - dollar_altvalue1 testDenys Vlasenko
ash might be a bit buggy, need to investigate dollar_altvalue9 test function old new delta expand_one_var 1639 2236 +597 expand_variables 112 128 +16 expand_vars_to_list 1117 1097 -20 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 613/-20) Total: 593 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: expand_vars_to_list() should not assume it starts new wordDenys Vlasenko
function old new delta expand_variables 112 115 +3 expand_vars_to_list 1117 1108 -9 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-9) Total: -6 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: remove pointless "next" var, simplify expand_vars_to_list()Denys Vlasenko
function old new delta o_addstr - 26 +26 expand_vars_to_list 1112 1117 +5 encode_then_expand_vararg 398 382 -16 parse_dollar 779 762 -17 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/2 up/down: 31/-33) Total: -2 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-20hush: store "ended_in_ifs" flag in o_stringDenys Vlasenko
This simplifies function parameter passing. function old new delta expand_one_var 1643 1639 -4 append_str_maybe_ifs_split 64 52 -12 expand_vars_to_list 1125 1112 -13 expand_on_ifs 361 345 -16 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-45) Total: -45 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 19:52:18 +0000