diff options
Diffstat (limited to 'networking')
| -rw-r--r-- | networking/Config.src | 156 | ||||
| -rw-r--r-- | networking/udhcp/Config.src | 16 |
2 files changed, 86 insertions, 86 deletions
diff --git a/networking/Config.src b/networking/Config.src index ce7166f98..eb8dc1ce2 100644 --- a/networking/Config.src +++ b/networking/Config.src @@ -7,7 +7,7 @@ menu "Networking Utilities" config FEATURE_IPV6 bool "Enable IPv6 support" - default n + default y help Enable IPv6 support in busybox. This adds IPv6 support in the networking applets. @@ -48,26 +48,26 @@ config VERBOSE_RESOLUTION_ERRORS config ARP bool "arp" - default n + default y help Manipulate the system ARP cache. config ARPING bool "arping" - default n + default y help Ping hosts by ARP packets. config BRCTL bool "brctl" - default n + default y help Manage ethernet bridges. Supports addbr/delbr and addif/delif. config FEATURE_BRCTL_FANCY bool "Fancy options" - default n + default y depends on BRCTL help Add support for extended option like: @@ -78,7 +78,7 @@ config FEATURE_BRCTL_FANCY config FEATURE_BRCTL_SHOW bool "Support show, showmac and showstp" - default n + default y depends on BRCTL && FEATURE_BRCTL_FANCY help Add support for option which prints the current config: @@ -86,19 +86,19 @@ config FEATURE_BRCTL_SHOW config DNSD bool "dnsd" - default n + default y help Small and static DNS server daemon. config ETHER_WAKE bool "ether-wake" - default n + default y help Send a magic packet to wake up sleeping machines. config FAKEIDENTD bool "fakeidentd" - default n + default y select FEATURE_SYSLOG help fakeidentd listens on the ident port and returns a predefined @@ -106,7 +106,7 @@ config FAKEIDENTD config FTPD bool "ftpd" - default n + default y help simple FTP daemon. You have to run it via inetd. @@ -130,38 +130,38 @@ config FEATURE_FTPD_ACCEPT_BROKEN_LIST config FTPGET bool "ftpget" - default n + default y help Retrieve a remote file via FTP. config FTPPUT bool "ftpput" - default n + default y help Store a remote file via FTP. config FEATURE_FTPGETPUT_LONG_OPTIONS bool "Enable long options in ftpget/ftpput" - default n + default y depends on LONG_OPTS && (FTPGET || FTPPUT) help Support long options for the ftpget/ftpput applet. config HOSTNAME bool "hostname" - default n + default y help Show or set the system's host name. config HTTPD bool "httpd" - default n + default y help Serve web pages via an HTTP server. config FEATURE_HTTPD_RANGES bool "Support 'Ranges:' header" - default n + default y depends on HTTPD help Makes httpd emit "Accept-Ranges: bytes" header and understand @@ -170,7 +170,7 @@ config FEATURE_HTTPD_RANGES config FEATURE_HTTPD_USE_SENDFILE bool "Use sendfile system call" - default n + default y depends on HTTPD help When enabled, httpd will use the kernel sendfile() function @@ -178,7 +178,7 @@ config FEATURE_HTTPD_USE_SENDFILE config FEATURE_HTTPD_SETUID bool "Enable -u <user> option" - default n + default y depends on HTTPD help This option allows the server to run as a specific user @@ -196,7 +196,7 @@ config FEATURE_HTTPD_BASIC_AUTH config FEATURE_HTTPD_AUTH_MD5 bool "Support MD5 crypted passwords for http Authentication" - default n + default y depends on FEATURE_HTTPD_BASIC_AUTH help Enables basic per URL authentication from /etc/httpd.conf @@ -212,7 +212,7 @@ config FEATURE_HTTPD_CGI config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR bool "Support for running scripts through an interpreter" - default n + default y depends on FEATURE_HTTPD_CGI help This option enables support for running scripts through an @@ -223,7 +223,7 @@ config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV bool "Set REMOTE_PORT environment variable for CGI" - default n + default y depends on FEATURE_HTTPD_CGI help Use of this option can assist scripts in generating @@ -241,7 +241,7 @@ config FEATURE_HTTPD_ENCODE_URL_STR config FEATURE_HTTPD_ERROR_PAGES bool "Support for custom error pages" - default n + default y depends on HTTPD help This option allows you to define custom error pages in @@ -254,7 +254,7 @@ config FEATURE_HTTPD_ERROR_PAGES config FEATURE_HTTPD_PROXY bool "Support for reverse proxy" - default n + default y depends on HTTPD help This option allows you to define URLs that will be forwarded @@ -266,7 +266,7 @@ config FEATURE_HTTPD_PROXY config IFCONFIG bool "ifconfig" - default n + default y help Ifconfig is used to configure the kernel-resident network interfaces. @@ -280,7 +280,7 @@ config FEATURE_IFCONFIG_STATUS config FEATURE_IFCONFIG_SLIP bool "Enable slip-specific options \"keepalive\" and \"outfill\"" - default n + default y depends on IFCONFIG help Allow "keepalive" and "outfill" support for SLIP. If you're not @@ -288,7 +288,7 @@ config FEATURE_IFCONFIG_SLIP config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" - default n + default y depends on IFCONFIG help Allow the start address for shared memory, start address for I/O, @@ -305,7 +305,7 @@ config FEATURE_IFCONFIG_HW config FEATURE_IFCONFIG_BROADCAST_PLUS bool "Set the broadcast automatically" - default n + default y depends on IFCONFIG help Setting this will make ifconfig attempt to find the broadcast @@ -313,20 +313,20 @@ config FEATURE_IFCONFIG_BROADCAST_PLUS config IFENSLAVE bool "ifenslave" - default n + default y help Userspace application to bind several interfaces to a logical interface (use with kernel bonding driver). config IFPLUGD bool "ifplugd" - default n + default y help Network interface plug detection daemon. config IFUPDOWN bool "ifupdown" - default n + default y help Activate or deactivate the specified interfaces. This applet makes use of either "ifconfig" and "route" or the "ip" command to actually @@ -353,7 +353,7 @@ config IFUPDOWN_IFSTATE_PATH config FEATURE_IFUPDOWN_IP bool "Use ip applet" - default n + default y depends on IFUPDOWN help Use the iproute "ip" command to implement "ifup" and "ifdown", rather @@ -375,7 +375,7 @@ config FEATURE_IFUPDOWN_IP_BUILTIN config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN bool "Use busybox ifconfig and route applets" - default y + default n depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP select IFCONFIG select ROUTE @@ -396,7 +396,7 @@ config FEATURE_IFUPDOWN_IPV4 config FEATURE_IFUPDOWN_IPV6 bool "Support for IPv6" - default n + default y depends on IFUPDOWN && FEATURE_IPV6 help If you need support for IPv6, turn this option on. @@ -404,7 +404,7 @@ config FEATURE_IFUPDOWN_IPV6 ### UNUSED ###config FEATURE_IFUPDOWN_IPX ### bool "Support for IPX" -### default n +### default y ### depends on IFUPDOWN ### help ### If this option is selected you can use busybox to work with IPX @@ -412,7 +412,7 @@ config FEATURE_IFUPDOWN_IPV6 config FEATURE_IFUPDOWN_MAPPING bool "Enable mapping support" - default n + default y depends on IFUPDOWN help This enables support for the "mapping" stanza, unless you have @@ -430,7 +430,7 @@ config FEATURE_IFUPDOWN_EXTERNAL_DHCP config INETD bool "inetd" - default n + default y select FEATURE_SYSLOG help Internet superserver daemon @@ -472,7 +472,7 @@ config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN config FEATURE_INETD_RPC bool "Support RPC services" - default n + default y depends on INETD select FEATURE_HAVE_RPC help @@ -480,7 +480,7 @@ config FEATURE_INETD_RPC config IP bool "ip" - default n + default y help The "ip" applet is a TCP/IP interface configuration and routing utility. You generally don't need "ip" to use busybox with @@ -509,21 +509,21 @@ config FEATURE_IP_ROUTE config FEATURE_IP_TUNNEL bool "ip tunnel" - default n + default y depends on IP help Add support for tunneling commands to "ip". config FEATURE_IP_RULE bool "ip rule" - default n + default y depends on IP help Add support for rule commands to "ip". config FEATURE_IP_SHORT_FORMS bool "Support short forms of ip commands" - default n + default y depends on IP help Also support short-form of ip <OBJECT> commands: @@ -573,7 +573,7 @@ config IPRULE config IPCALC bool "ipcalc" - default n + default y help ipcalc takes an IP address and netmask and calculates the resulting broadcast, network, and host range. @@ -588,14 +588,14 @@ config FEATURE_IPCALC_FANCY config FEATURE_IPCALC_LONG_OPTIONS bool "Enable long options" - default n + default y depends on IPCALC && LONG_OPTS help Support long options for the ipcalc applet. config NAMEIF bool "nameif" - default n + default y select FEATURE_SYSLOG help nameif is used to rename network interface by its MAC address. @@ -610,7 +610,7 @@ config NAMEIF config FEATURE_NAMEIF_EXTENDED bool "Extended nameif" - default n + default y depends on NAMEIF help This extends the nameif syntax to support the bus_info and driver @@ -623,21 +623,21 @@ config FEATURE_NAMEIF_EXTENDED config NC bool "nc" - default n + default y help A simple Unix utility which reads and writes data across network connections. config NC_SERVER bool "Netcat server options (-l)" - default n + default y depends on NC help Allow netcat to act as a server. config NC_EXTRA bool "Netcat extensions (-eiw and filename)" - default n + default y depends on NC help Add -e (support for executing the rest of the command line after @@ -646,13 +646,13 @@ config NC_EXTRA config NETSTAT bool "netstat" - default n + default y help netstat prints information about the Linux networking subsystem. config FEATURE_NETSTAT_WIDE bool "Enable wide netstat output" - default n + default y depends on NETSTAT help Add support for wide columns. Useful when displaying IPv6 addresses @@ -660,7 +660,7 @@ config FEATURE_NETSTAT_WIDE config FEATURE_NETSTAT_PRG bool "Enable PID/Program name output" - default n + default y depends on NETSTAT help Add support for -p flag to print out PID and program name. @@ -668,13 +668,13 @@ config FEATURE_NETSTAT_PRG config NSLOOKUP bool "nslookup" - default n + default y help nslookup is a tool to query Internet name servers. config NTPD bool "ntpd" - default n + default y help The NTP client/server daemon. @@ -688,14 +688,14 @@ config FEATURE_NTPD_SERVER config PING bool "ping" - default n + default y help ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. config PING6 bool "ping6" - default n + default y depends on FEATURE_IPV6 && PING help This will give you a ping that can talk IPv6. @@ -710,26 +710,26 @@ config FEATURE_FANCY_PING config PSCAN bool "pscan" - default n + default y help Simple network port scanner. config ROUTE bool "route" - default n + default y help Route displays or manipulates the kernel's IP routing tables. config SLATTACH bool "slattach" - default n + default y help slattach is a small utility to attach network interfaces to serial lines. #config TC # bool "tc" -# default n +# default y # help # show / manipulate traffic control settings # @@ -739,14 +739,14 @@ config SLATTACH config TCPSVD bool "tcpsvd" - default n + default y help tcpsvd listens on a TCP port and runs a program for each new connection. config TELNET bool "telnet" - default n + default y help Telnet is an interface to the TELNET protocol, but is also commonly used to test other simple protocols. @@ -772,7 +772,7 @@ config FEATURE_TELNET_AUTOLOGIN config TELNETD bool "telnetd" - default n + default y select FEATURE_SYSLOG help A daemon for the TELNET protocol, allowing you to log onto the host @@ -815,14 +815,14 @@ config TELNETD config FEATURE_TELNETD_STANDALONE bool "Support standalone telnetd (not inetd only)" - default n + default y depends on TELNETD help Selecting this will make telnetd able to run standalone. config FEATURE_TELNETD_INETD_WAIT bool "Support -w SEC option (inetd wait mode)" - default n + default y depends on FEATURE_TELNETD_STANDALONE help This option allows you to run telnetd in "inet wait" mode. @@ -843,7 +843,7 @@ config FEATURE_TELNETD_INETD_WAIT config TFTP bool "tftp" - default n + default y help This enables the Trivial File Transfer Protocol client program. TFTP is usually used for simple, small transfers such as a root image @@ -851,7 +851,7 @@ config TFTP config TFTPD bool "tftpd" - default n + default y help This enables the Trivial File Transfer Protocol server program. It expects that stdin is a datagram socket and a packet @@ -882,7 +882,7 @@ config FEATURE_TFTP_PUT config FEATURE_TFTP_BLOCKSIZE bool "Enable 'blksize' and 'tsize' protocol options" - default n + default y depends on TFTP || TFTPD help Allow tftp to specify block size, and tftpd to understand @@ -890,7 +890,7 @@ config FEATURE_TFTP_BLOCKSIZE config FEATURE_TFTP_PROGRESS_BAR bool "Enable tftp progress meter" - default n + default y depends on TFTP && FEATURE_TFTP_BLOCKSIZE help Show progress bar. @@ -905,20 +905,20 @@ config TFTP_DEBUG config TRACEROUTE bool "traceroute" - default n + default y help Utility to trace the route of IP packets. config TRACEROUTE6 bool "traceroute6" - default n + default y depends on FEATURE_IPV6 && TRACEROUTE help Utility to trace the route of IPv6 packets. config FEATURE_TRACEROUTE_VERBOSE bool "Enable verbose output" - default n + default y depends on TRACEROUTE help Add some verbosity to traceroute. This includes among other things @@ -941,13 +941,13 @@ config FEATURE_TRACEROUTE_USE_ICMP config TUNCTL bool "tunctl" - default n + default y help tunctl creates or deletes tun devices. config FEATURE_TUNCTL_UG bool "Support owner:group assignment" - default n + default y depends on TUNCTL help Allow to specify owner and group of newly created interface. @@ -966,20 +966,20 @@ config IFUPDOWN_UDHCPC_CMD_OPTIONS config UDPSVD bool "udpsvd" - default n + default y help udpsvd listens on an UDP port and runs a program for each new connection. config VCONFIG bool "vconfig" - default n + default y help Creates, removes, and configures VLAN interfaces config WGET bool "wget" - default n + default y help wget is a utility for non-interactive download of files from HTTP, HTTPS, and FTP servers. @@ -1000,14 +1000,14 @@ config FEATURE_WGET_AUTHENTICATION config FEATURE_WGET_LONG_OPTIONS bool "Enable long options" - default n + default y depends on WGET && LONG_OPTS help Support long options for the wget applet. config ZCIP bool "zcip" - default n + default y select FEATURE_SYSLOG help ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src index 34adf35fe..f5840a945 100644 --- a/networking/udhcp/Config.src +++ b/networking/udhcp/Config.src @@ -5,14 +5,14 @@ config UDHCPD bool "udhcp server (udhcpd)" - default n + default y help udhcpd is a DHCP server geared primarily toward embedded systems, while striving to be fully functional and RFC compliant. config DHCPRELAY bool "dhcprelay" - default n + default y depends on UDHCPD help dhcprelay listens for dhcp requests on one or more interfaces @@ -21,7 +21,7 @@ config DHCPRELAY config DUMPLEASES bool "Lease display utility (dumpleases)" - default n + default y depends on UDHCPD help dumpleases displays the leases written out by the udhcpd server. @@ -30,7 +30,7 @@ config DUMPLEASES config FEATURE_UDHCPD_WRITE_LEASES_EARLY bool "Rewrite the lease file at every new acknowledge" - default n + default y depends on UDHCPD help If selected, udhcpd will write a new file with leases every @@ -48,7 +48,7 @@ config DHCPD_LEASES_FILE config UDHCPC bool "udhcp client (udhcpc)" - default n + default y help udhcpc is a DHCP client geared primarily toward embedded systems, while striving to be fully functional and RFC compliant. @@ -68,7 +68,7 @@ config FEATURE_UDHCPC_ARPING config FEATURE_UDHCP_PORT bool "Enable '-P port' option for udhcpd and udhcpc" - default n + default y depends on UDHCPD || UDHCPC help At the cost of ~300 bytes, enables -P port option. @@ -76,7 +76,7 @@ config FEATURE_UDHCP_PORT config UDHCP_DEBUG int "Maximum verbosity level for udhcp applets (0..9)" - default 0 + default 9 range 0 9 depends on UDHCPD || UDHCPC || DHCPRELAY help @@ -88,7 +88,7 @@ config UDHCP_DEBUG config FEATURE_UDHCP_RFC3397 bool "Support for RFC3397 domain search (experimental)" - default n + default y depends on UDHCPD || UDHCPC help If selected, both client and server will support passing of domain |