top: optional SMP support by Vineet Gupta (vineetg76 AT gmail.com)

2 files changed, 275 insertions, 86 deletions

diff --git a/procps/Config.in b/procps/Config.in
index 642ebd015..548463c67 100644
--- a/procps/Config.in
+++ b/procps/Config.in
@@ -148,6 +148,13 @@ config FEATURE_TOP_CPU_GLOBAL_PERCENTS
 	help
 	  Makes top display "CPU: NN% usr NN% sys..." line.
 
+config FEATURE_TOP_SMP_CPU
+	bool "SMP CPU usage display ('c' key) (adds 0.5kb)"
+	default n
+	depends on FEATURE_TOP_CPU_GLOBAL_PERCENTS
+	help
+	  Allos 'c' key to switch between individual/cumulative CPU stats
+
 config FEATURE_TOP_DECIMALS
 	bool "Show 1/10th of a percent in CPU/mem statistics (adds 0.3k bytes)"
 	default n
@@ -155,8 +162,15 @@ config FEATURE_TOP_DECIMALS
 	help
 	  Show 1/10th of a percent in CPU/mem statistics.
 
+config FEATURE_TOP_SMP_PROCESS
+	bool "Show CPU process runs on (adds <0.1k bytes)"
+	default n
+	depends on TOP
+	help
+	  Show CPU where process was last found running on
+
 config FEATURE_TOPMEM
-	bool "topmem"
+	bool "Topmem command ('s' key)"
 	default n
 	depends on TOP
 	help
@@ -180,4 +194,3 @@ config WATCH
 
 
 endmenu
-
diff --git a/procps/top.c b/procps/top.c
index 663eac674..c881ad419 100644
--- a/procps/top.c
+++ b/procps/top.c
@@ -16,6 +16,12 @@
  * (C) Eero Tamminen <oak at welho dot com>
  *
  * Rewritten by Vladimir Oleynik (C) 2002 <dzo@simtreas.ru>
+ *
+ * Sept 2008: Vineet Gupta <vineet.gupta@arc.com>
+ * Added Support for reporting SMP Information
+ * - CPU where Process was last seen running
+ *   (to see effect of sched_setaffinity() etc)
+ * - CPU Time Split (idle/IO/wait etc) PER CPU
  */
 
 /* Original code Copyrights */
@@ -41,6 +47,9 @@ typedef struct top_status_t {
 	unsigned uid;
 	char state[4];
 	char comm[COMM_LEN];
+#if ENABLE_FEATURE_TOP_SMP_PROCESS
+	int last_seen_on_cpu;
+#endif
 } top_status_t;
 
 typedef struct jiffy_counts_t {
@@ -69,6 +78,9 @@ struct globals {
 	smallint sort_field;
 	smallint inverted;
 #endif
+#if ENABLE_FEATURE_TOP_SMP_CPU
+	smallint smp_cpu_info; /* one/many cpu info lines? */
+#endif
 #if ENABLE_FEATURE_USE_TERMIOS
 	struct termios initial_settings;
 #endif
@@ -83,6 +95,11 @@ struct globals {
 	unsigned total_pcpu;
 	/* unsigned long total_vsz; */
 #endif
+#if ENABLE_FEATURE_TOP_SMP_CPU
+	/* Per CPU samples: current and last */
+	jiffy_counts_t *cpu_jif, *cpu_prev_jif;
+	int num_cpus;
+#endif
 	char line_buf[80];
 };
 
@@ -98,12 +115,16 @@ enum { LINE_BUF_SIZE = COMMON_BUFSIZE - offsetof(struct globals, line_buf) };
 #define ntop             (G.ntop              )
 #define sort_field       (G.sort_field        )
 #define inverted         (G.inverted          )
+#define smp_cpu_info     (G.smp_cpu_info      )
 #define initial_settings (G.initial_settings  )
 #define sort_function    (G.sort_function     )
 #define prev_hist        (G.prev_hist         )
 #define prev_hist_count  (G.prev_hist_count   )
 #define jif              (G.jif               )
 #define prev_jif         (G.prev_jif          )
+#define cpu_jif          (G.cpu_jif           )
+#define cpu_prev_jif     (G.cpu_prev_jif      )
+#define num_cpus         (G.num_cpus          )
 #define total_pcpu       (G.total_pcpu        )
 #define line_buf         (G.line_buf          )
 
@@ -161,24 +182,94 @@ static int mult_lvl_cmp(void* a, void* b)
 	return 0;
 }
 
+/* NOINLINE so that complier doesn't unfold the call
+ * causing multiple copies of the arithmatic instrns
+ */
+static NOINLINE int read_cpu_jiffy(FILE *fp, jiffy_counts_t *p_jif)
+{
+#if !ENABLE_FEATURE_TOP_SMP_CPU
+	static const char fmt[] = "cpu %lld %lld %lld %lld %lld %lld %lld %lld";
+#else
+	static const char fmt[] = "cp%*s %lld %lld %lld %lld %lld %lld %lld %lld";
+#endif
+	int ret;
+
+	if (!fgets(line_buf, LINE_BUF_SIZE, fp) || line_buf[0] != 'c' /* not "cpu" */)
+		return 0;
+	ret = sscanf(line_buf, fmt,
+			&p_jif->usr, &p_jif->nic, &p_jif->sys, &p_jif->idle,
+			&p_jif->iowait, &p_jif->irq, &p_jif->softirq,
+			&p_jif->steal);
+	if (ret > 4) {
+		p_jif->total = p_jif->usr + p_jif->nic + p_jif->sys + p_jif->idle
+			+ p_jif->iowait + p_jif->irq + p_jif->softirq + p_jif->steal;
+		/* procps 2.x does not count iowait as busy time */
+		p_jif->busy = p_jif->total - p_jif->idle - p_jif->iowait;
+	}
+
+	return ret;
+}
 
 static void get_jiffy_counts(void)
 {
 	FILE* fp = xfopen_for_read("stat");
+
+#if !ENABLE_FEATURE_TOP_SMP_CPU
 	prev_jif = jif;
-	if (fscanf(fp, "cpu  %lld %lld %lld %lld %lld %lld %lld %lld",
-			&jif.usr,&jif.nic,&jif.sys,&jif.idle,
-			&jif.iowait,&jif.irq,&jif.softirq,&jif.steal) < 4) {
+	if (read_cpu_jiffy(fp, &jif) < 4)
 		bb_error_msg_and_die("can't read /proc/stat");
+	fclose(fp);
+	return;
+#else
+	if (!smp_cpu_info) {  /* user wants to see cumulative cpu info */
+		prev_jif = jif;
+		if (read_cpu_jiffy(fp, &jif) < 4)
+			bb_error_msg_and_die("can't read /proc/stat");
+		fclose(fp);
+		return;
+	}
+
+	/* Discard first "cpu ..." line */
+	fgets(line_buf, LINE_BUF_SIZE, fp);
+
+	if (!num_cpus) {
+		/* First time here. How many CPUs?
+		 * There will be at least 1 /proc/stat line with cpu%d
+		 */
+		while (1) {
+			cpu_jif = xrealloc_vector(cpu_jif, 1, num_cpus);
+			if (read_cpu_jiffy(fp, &cpu_jif[num_cpus]) <= 4)
+				break;
+			num_cpus++;
+		}
+		if (num_cpus == 0) /* /proc/stat with only "cpu ..." line?! */
+			smp_cpu_info = 0;
+
+		/* TODO: need to cap num_cpus to a reasonable num
+		 * on massively paralle machines so that we dont
+		 * swamp the terminal with cpu "only" info
+		 */
+		cpu_prev_jif = xzalloc(sizeof(cpu_prev_jif[0]) * num_cpus);
+
+		/* Otherwise the first per cpu display shows all 100% idles */
+		usleep(50000);
+	} else { /* Non first time invocation */
+		jiffy_counts_t *tmp;
+		int i;
+
+		/* First switch the sample pointers: no need to copy */
+		tmp = cpu_prev_jif;
+		cpu_prev_jif = cpu_jif;
+		cpu_jif = tmp;
+
+		/* Get the new samples */
+		for (i = 0; i < num_cpus; i++)
+			read_cpu_jiffy(fp, &cpu_jif[i]);
 	}
+#endif
 	fclose(fp);
-	jif.total = jif.usr + jif.nic + jif.sys + jif.idle
-			+ jif.iowait + jif.irq + jif.softirq + jif.steal;
-	/* procps 2.x does not count iowait as busy time */
-	jif.busy = jif.total - jif.idle - jif.iowait;
 }
 
-
 static void do_stats(void)
 {
 	top_status_t *cur;
@@ -189,7 +280,7 @@ static void do_stats(void)
 	get_jiffy_counts();
 	total_pcpu = 0;
 	/* total_vsz = 0; */
-	new_hist = xmalloc(sizeof(struct save_hist)*ntop);
+	new_hist = xmalloc(sizeof(new_hist[0]) * ntop);
 	/*
 	 * Make a pass through the data to get stats.
 	 */
@@ -230,6 +321,7 @@ static void do_stats(void)
 	prev_hist = new_hist;
 	prev_hist_count = ntop;
 }
+
 #endif /* FEATURE_TOP_CPU_USAGE_PERCENTAGE */
 
 #if ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS && ENABLE_FEATURE_TOP_DECIMALS
@@ -257,15 +349,92 @@ static char *fmt_100percent_8(char pbuf[8], unsigned value, unsigned total)
 }
 #endif
 
-static unsigned long display_header(int scr_width)
+#if ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS
+static void display_cpus(int scr_width, char *scrbuf, int *lines_rem_p)
+{
+	/*
+	 * xxx% = (jif.xxx - prev_jif.xxx) / (jif.total - prev_jif.total) * 100%
+	 */
+	unsigned total_diff;
+	jiffy_counts_t *p_jif, *p_prev_jif;
+	int i;
+
+#if ENABLE_FEATURE_TOP_SMP_CPU
+	int n_cpu_lines;
+#endif
+
+	/* using (unsigned) casts to make operations cheaper */
+#define  CALC_TOT_DIFF  ((unsigned)(p_jif->total - p_prev_jif->total) ? : 1)
+
+#if ENABLE_FEATURE_TOP_DECIMALS
+#define CALC_STAT(xxx) char xxx[8]
+#define SHOW_STAT(xxx) fmt_100percent_8(xxx, (unsigned)(p_jif->xxx - p_prev_jif->xxx), total_diff)
+#define FMT "%s"
+#else
+#define CALC_STAT(xxx) unsigned xxx = 100 * (unsigned)(p_jif->xxx - p_prev_jif->xxx) / total_diff
+#define SHOW_STAT(xxx) xxx
+#define FMT "%4u%% "
+#endif
+
+#if !ENABLE_FEATURE_TOP_SMP_CPU
+	{
+		i = 1;
+		p_jif = &jif;
+		p_prev_jif = &prev_jif;
+#else
+	/* Loop thru CPU(s) */
+	n_cpu_lines = smp_cpu_info ? num_cpus : 1;
+	if (n_cpu_lines > *lines_rem_p)
+		n_cpu_lines = *lines_rem_p;
+
+	for (i = 0; i < n_cpu_lines; i++) {
+		/* set the real loop end */
+		p_jif = &cpu_jif[i];
+		p_prev_jif = &cpu_prev_jif[i];
+#endif
+		total_diff = CALC_TOT_DIFF;
+
+		{ /* Need block: CALC_STAT are declarations */
+			CALC_STAT(usr);
+			CALC_STAT(sys);
+			CALC_STAT(nic);
+			CALC_STAT(idle);
+			CALC_STAT(iowait);
+			CALC_STAT(irq);
+			CALC_STAT(softirq);
+			/*CALC_STAT(steal);*/
+
+			snprintf(scrbuf, scr_width,
+				/* Barely fits in 79 chars when in "decimals" mode. */
+#if ENABLE_FEATURE_TOP_SMP_CPU
+				"CPU%s:"FMT"usr"FMT"sys"FMT"nic"FMT"idle"FMT"io"FMT"irq"FMT"sirq",
+				(smp_cpu_info ? utoa(i) : ""),
+#else
+				"CPU:"FMT"usr"FMT"sys"FMT"nic"FMT"idle"FMT"io"FMT"irq"FMT"sirq",
+#endif
+				SHOW_STAT(usr), SHOW_STAT(sys), SHOW_STAT(nic), SHOW_STAT(idle),
+				SHOW_STAT(iowait), SHOW_STAT(irq), SHOW_STAT(softirq)
+				/*, SHOW_STAT(steal) - what is this 'steal' thing? */
+				/* I doubt anyone wants to know it */
+			);
+			puts(scrbuf);
+		}
+	}
+#undef SHOW_STAT
+#undef CALC_STAT
+#undef FMT
+	*lines_rem_p -= i;
+}
+#else  /* !ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS */
+#define display_cpus(scr_width, scrbuf, lines_rem) ((void)0)
+#endif
+
+static unsigned long display_header(int scr_width, int *lines_rem_p)
 {
 	FILE *fp;
 	char buf[80];
 	char scrbuf[80];
 	unsigned long total, used, mfree, shared, buffers, cached;
-#if ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS
-	unsigned total_diff;
-#endif
 
 	/* read memory info */
 	fp = xfopen_for_read("meminfo");
@@ -298,7 +467,6 @@ static unsigned long display_header(int scr_width)
 		 * sizes in kilobytes. This should be safe for both 2.4 and
 		 * 2.6.
 		 */
-
 		fscanf(fp, "MemFree: %lu %s\n", &mfree, buf);
 
 		/*
@@ -323,47 +491,12 @@ static unsigned long display_header(int scr_width)
 		used, mfree, shared, buffers, cached);
 	/* clear screen & go to top */
 	printf(OPT_BATCH_MODE ? "%s\n" : "\e[H\e[J%s\n", scrbuf);
+	(*lines_rem_p)--;
 
-#if ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS
-	/*
-	 * xxx% = (jif.xxx - prev_jif.xxx) / (jif.total - prev_jif.total) * 100%
+	/* Display CPU time split as percentage of total time
+	 * This displays either a cumulative line or one line per CPU
 	 */
-	/* using (unsigned) casts to make operations cheaper */
-	total_diff = ((unsigned)(jif.total - prev_jif.total) ? : 1);
-#if ENABLE_FEATURE_TOP_DECIMALS
-/* Generated code is approx +0.3k */
-#define CALC_STAT(xxx) char xxx[8]
-#define SHOW_STAT(xxx) fmt_100percent_8(xxx, (unsigned)(jif.xxx - prev_jif.xxx), total_diff)
-#define FMT "%s"
-#else
-#define CALC_STAT(xxx) unsigned xxx = 100 * (unsigned)(jif.xxx - prev_jif.xxx) / total_diff
-#define SHOW_STAT(xxx) xxx
-#define FMT "%4u%% "
-#endif
-	{ /* need block: CALC_STAT are declarations */
-		CALC_STAT(usr);
-		CALC_STAT(sys);
-		CALC_STAT(nic);
-		CALC_STAT(idle);
-		CALC_STAT(iowait);
-		CALC_STAT(irq);
-		CALC_STAT(softirq);
-		//CALC_STAT(steal);
-
-		snprintf(scrbuf, scr_width,
-			/* Barely fits in 79 chars when in "decimals" mode. */
-			"CPU:"FMT"usr"FMT"sys"FMT"nice"FMT"idle"FMT"io"FMT"irq"FMT"softirq",
-			SHOW_STAT(usr), SHOW_STAT(sys), SHOW_STAT(nic), SHOW_STAT(idle),
-			SHOW_STAT(iowait), SHOW_STAT(irq), SHOW_STAT(softirq)
-			//, SHOW_STAT(steal) - what is this 'steal' thing?
-			// I doubt anyone wants to know it
-		);
-	}
-	puts(scrbuf);
-#undef SHOW_STAT
-#undef CALC_STAT
-#undef FMT
-#endif
+	display_cpus(scr_width, scrbuf, lines_rem_p);
 
 	/* read load average as a string */
 	buf[0] = '\0';
@@ -371,35 +504,39 @@ static unsigned long display_header(int scr_width)
 	buf[sizeof("N.NN N.NN N.NN")-1] = '\0';
 	snprintf(scrbuf, scr_width, "Load average: %s", buf);
 	puts(scrbuf);
+	(*lines_rem_p)--;
 
 	return total;
 }
 
-static NOINLINE void display_process_list(int count, int scr_width)
+static NOINLINE void display_process_list(int lines_rem, int scr_width)
 {
 	enum {
-		BITS_PER_INT = sizeof(int)*8
+		BITS_PER_INT = sizeof(int) * 8
 	};
 
-	top_status_t *s = top;
+	top_status_t *s;
 	char vsz_str_buf[8];
-	unsigned long total_memory = display_header(scr_width); /* or use total_vsz? */
+	unsigned long total_memory = display_header(scr_width, &lines_rem); /* or use total_vsz? */
 	/* xxx_shift and xxx_scale variables allow us to replace
 	 * expensive divides with multiply and shift */
 	unsigned pmem_shift, pmem_scale, pmem_half;
 #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE
 	unsigned pcpu_shift, pcpu_scale, pcpu_half;
 	unsigned busy_jifs;
+#endif
 
 	/* what info of the processes is shown */
 	printf(OPT_BATCH_MODE ? "%.*s" : "\e[7m%.*s\e[0m", scr_width,
-		"  PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND");
-#else
-
-	/* !CPU_USAGE_PERCENTAGE */
-	printf(OPT_BATCH_MODE ? "%.*s" : "\e[7m%.*s\e[0m", scr_width,
-		"  PID  PPID USER     STAT   VSZ %MEM COMMAND");
+		"  PID  PPID USER     STAT   VSZ %MEM"
+#if ENABLE_FEATURE_TOP_SMP_PROCESS
+		" CPU"
+#endif
+#if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+		" %CPU"
 #endif
+		" COMMAND");
+	lines_rem--;
 
 #if ENABLE_FEATURE_TOP_DECIMALS
 #define UPSCALE 1000
@@ -453,9 +590,12 @@ static NOINLINE void display_process_list(int count, int scr_width)
 	/* printf(" pmem_scale=%u pcpu_scale=%u ", pmem_scale, pcpu_scale); */
 #endif
 
-	scr_width += 2; /* account for leading '\n' and trailing NUL */
 	/* Ok, all preliminary data is ready, go through the list */
-	while (count-- > 0) {
+	scr_width += 2; /* account for leading '\n' and trailing NUL */
+	if (lines_rem > ntop)
+		lines_rem = ntop;
+	s = top;
+	while (--lines_rem >= 0) {
 		unsigned col;
 		CALC_STAT(pmem, (s->vsz*pmem_scale + pmem_half) >> pmem_shift);
 #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE
@@ -466,9 +606,12 @@ static NOINLINE void display_process_list(int count, int scr_width)
 			sprintf(vsz_str_buf, "%6ldm", s->vsz/1024);
 		else
 			sprintf(vsz_str_buf, "%7ld", s->vsz);
-		// PID PPID USER STAT VSZ %MEM [%CPU] COMMAND
+		/* PID PPID USER STAT VSZ %MEM [%CPU] COMMAND */
 		col = snprintf(line_buf, scr_width,
 				"\n" "%5u%6u %-8.8s %s%s" FMT
+#if ENABLE_FEATURE_TOP_SMP_PROCESS
+				" %3d"
+#endif
 #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE
 				FMT
 #endif
@@ -476,6 +619,9 @@ static NOINLINE void display_process_list(int count, int scr_width)
 				s->pid, s->ppid, get_cached_username(s->uid),
 				s->state, vsz_str_buf,
 				SHOW_STAT(pmem)
+#if ENABLE_FEATURE_TOP_SMP_PROCESS
+				, s->last_seen_on_cpu
+#endif
 #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE
 				, SHOW_STAT(pcpu)
 #endif
@@ -580,7 +726,7 @@ static char *grab_number(char *str, const char *match, unsigned sz)
 }
 
 /* display header info (meminfo / loadavg) */
-static void display_topmem_header(int scr_width)
+static void display_topmem_header(int scr_width, int *lines_rem_p)
 {
 	char linebuf[128];
 	unsigned i;
@@ -655,6 +801,8 @@ static void display_topmem_header(int scr_width)
 		"Swap %stotal %sfree", // TODO: % used?
 		S(swaptotal), S(swapfree));
 	printf("%.*s\n", scr_width, linebuf);
+
+	(*lines_rem_p) -= 3;
 #undef S
 
 	for (i = 0; i < ARRAY_SIZE(str); i++)
@@ -680,19 +828,22 @@ static void ulltoa6_and_space(unsigned long long ul, char buf[6])
 	buf[5] = ' ';
 }
 
-static NOINLINE void display_topmem_process_list(int count, int scr_width)
+static NOINLINE void display_topmem_process_list(int lines_rem, int scr_width)
 {
 #define HDR_STR "  PID   VSZ VSZRW   RSS (SHR) DIRTY (SHR) STACK"
 #define MIN_WIDTH sizeof(HDR_STR)
 	const topmem_status_t *s = topmem;
 
-	display_topmem_header(scr_width);
+	display_topmem_header(scr_width, &lines_rem);
 	strcpy(line_buf, HDR_STR " COMMAND");
 	line_buf[5 + sort_field * 6] = '*';
 	printf(OPT_BATCH_MODE ? "%.*s" : "\e[7m%.*s\e[0m", scr_width, line_buf);
+	lines_rem--;
 
-	while (--count >= 0) {
-		// PID VSZ VSZRW RSS (SHR) DIRTY (SHR) COMMAND
+	if (lines_rem > ntop)
+		lines_rem = ntop;
+	while (--lines_rem >= 0) {
+		/* PID VSZ VSZRW RSS (SHR) DIRTY (SHR) COMMAND */
 		ulltoa6_and_space(s->pid     , &line_buf[0*6]);
 		ulltoa6_and_space(s->vsz     , &line_buf[1*6]);
 		ulltoa6_and_space(s->vszrw   , &line_buf[2*6]);
@@ -714,7 +865,7 @@ static NOINLINE void display_topmem_process_list(int count, int scr_width)
 #undef MIN_WIDTH
 }
 #else
-void display_topmem_process_list(int count, int scr_width);
+void display_topmem_process_list(int lines_rem, int scr_width);
 int topmem_sort(char *a, char *b);
 #endif /* TOPMEM */
 
@@ -731,6 +882,9 @@ enum {
 		| PSSCAN_UTIME
 		| PSSCAN_STATE
 		| PSSCAN_COMM
+#if ENABLE_FEATURE_TOP_SMP_PROCESS
+		| PSSCAN_CPU
+#endif
 		| PSSCAN_UIDGID,
 	TOPMEM_MASK = 0
 		| PSSCAN_PID
@@ -741,9 +895,9 @@ enum {
 int top_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 int top_main(int argc UNUSED_PARAM, char **argv)
 {
-	int count;
 	int iterations;
 	unsigned lines, col;
+	int lines_rem;
 	unsigned interval;
 	char *sinterval;
 	SKIP_FEATURE_TOPMEM(const) unsigned scan_mask = TOP_MASK;
@@ -760,12 +914,18 @@ int top_main(int argc UNUSED_PARAM, char **argv)
 
 	interval = 5; /* default update interval is 5 seconds */
 	iterations = 0; /* infinite */
+#if ENABLE_FEATURE_TOP_SMP_CPU
+	/*num_cpus = 0;*/
+	/*smp_cpu_info = 0;*/  /* to start with show aggregate */
+	cpu_jif = &jif;
+	cpu_prev_jif = &prev_jif;
+#endif
 
 	/* all args are options; -n NUM */
 	opt_complementary = "-:n+";
 	if (getopt32(argv, "d:n:b", &sinterval, &iterations) & OPT_d) {
 		/* Need to limit it to not overflow poll timeout */
-		interval = xatou16(sinterval); // -d
+		interval = xatou16(sinterval); /* -d */
 	}
 
 	/* change to /proc */
@@ -803,10 +963,6 @@ int top_main(int argc UNUSED_PARAM, char **argv)
 #endif /* FEATURE_USE_TERMIOS */
 		if (col > LINE_BUF_SIZE-2) /* +2 bytes for '\n', NUL, */
 			col = LINE_BUF_SIZE-2;
-		if (!ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS && scan_mask == TOP_MASK)
-			lines -= 3;
-		else
-			lines -= 4;
 
 		/* read process IDs & status for all the processes */
 		while ((p = procps_scan(p, scan_mask)) != NULL) {
@@ -823,6 +979,9 @@ int top_main(int argc UNUSED_PARAM, char **argv)
 				top[n].uid = p->uid;
 				strcpy(top[n].state, p->state);
 				strcpy(top[n].comm, p->comm);
+#if ENABLE_FEATURE_TOP_SMP_PROCESS
+				top[n].last_seen_on_cpu = p->last_seen_on_cpu;
+#endif
 			} else { /* TOPMEM */
 #if ENABLE_FEATURE_TOPMEM
 				if (!(p->mapped_ro | p->mapped_rw))
@@ -856,7 +1015,7 @@ int top_main(int argc UNUSED_PARAM, char **argv)
 				continue;
 			}
 			do_stats();
-/* TODO: we don't need to sort all 10000 processes, we need to find top 24! */
+			/* TODO: we don't need to sort all 10000 processes, we need to find top 24! */
 			qsort(top, ntop, sizeof(top_status_t), (void*)mult_lvl_cmp);
 #else
 			qsort(top, ntop, sizeof(top_status_t), (void*)(sort_function[0]));
@@ -867,15 +1026,15 @@ int top_main(int argc UNUSED_PARAM, char **argv)
 			qsort(topmem, ntop, sizeof(topmem_status_t), (void*)topmem_sort);
 		}
 #endif
-		count = lines;
-		if (OPT_BATCH_MODE || count > ntop) {
-			count = ntop;
+		lines_rem = lines;
+		if (OPT_BATCH_MODE) {
+			lines_rem = INT_MAX;
 		}
 		if (scan_mask == TOP_MASK)
-			display_process_list(count, col);
+			display_process_list(lines_rem, col);
 #if ENABLE_FEATURE_TOPMEM
 		else
-			display_topmem_process_list(count, col);
+			display_topmem_process_list(lines_rem, col);
 #endif
 		clearmems();
 		if (iterations >= 0 && !--iterations)
@@ -932,6 +1091,23 @@ int top_main(int argc UNUSED_PARAM, char **argv)
 			if (c == 'r')
 				inverted ^= 1;
 #endif
+#if ENABLE_FEATURE_TOP_SMP_CPU
+			if (c == 'c') { /* procps-2.0.18 uses 'C' */
+				/* User wants to toggle per cpu <> aggregate */
+				if (smp_cpu_info) {
+					free(cpu_prev_jif);
+					free(cpu_jif);
+					cpu_jif = &jif;
+					cpu_prev_jif = &prev_jif;
+				} else {
+					/* Prepare for xrealloc() */
+					cpu_jif = cpu_prev_jif = NULL;
+				}
+				num_cpus = 0;
+				smp_cpu_info = !smp_cpu_info;
+				get_jiffy_counts();
+			}
+#endif
 #endif
 		}
 #endif /* FEATURE_USE_TERMIOS */