- wrap overlong lines (Cristian Ionescu-Idbohrn)

- s/\.  /. /g;# (me)

1 files changed, 26 insertions, 22 deletions

diff --git a/networking/Config.in b/networking/Config.in
index fb6988b41..5f38062c6 100644
--- a/networking/Config.in
+++ b/networking/Config.in
@@ -216,7 +216,7 @@ config FEATURE_HTTPD_ENCODE_URL_STR
 	depends on HTTPD
 	help
 	  This option allows html encoding of arbitrary strings for display
-	  by the browser.  Output goes to stdout.
+	  by the browser. Output goes to stdout.
 	  For example, httpd -e "<Hello World>" produces
 	  "&#60Hello&#32World&#62".
 
@@ -264,7 +264,7 @@ config FEATURE_IFCONFIG_SLIP
 	default n
 	depends on IFCONFIG
 	help
-	  Allow "keepalive" and "outfill" support for SLIP.  If you're not
+	  Allow "keepalive" and "outfill" support for SLIP. If you're not
 	  planning on using serial lines, leave this unchecked.
 
 config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
@@ -281,7 +281,7 @@ config FEATURE_IFCONFIG_HW
 	depends on IFCONFIG
 	help
 	  Set the hardware address of this interface, if the device driver
-	  supports  this  operation.  Currently, we only support the 'ether'
+	  supports  this  operation. Currently, we only support the 'ether'
 	  class.
 
 config FEATURE_IFCONFIG_BROADCAST_PLUS
@@ -303,15 +303,15 @@ config IFUPDOWN
 	bool "ifupdown"
 	default n
 	help
-	  Activate or deactivate the specified interfaces.  This applet makes
+	  Activate or deactivate the specified interfaces. This applet makes
 	  use of either "ifconfig" and "route" or the "ip" command to actually
-	  configure network interfaces.  Therefore, you will probably also want
+	  configure network interfaces. Therefore, you will probably also want
 	  to enable either IFCONFIG and ROUTE, or enable
-	  FEATURE_IFUPDOWN_IP and the various IP options.  Of
+	  FEATURE_IFUPDOWN_IP and the various IP options. Of
 	  course you could use non-busybox versions of these programs, so
 	  against my better judgement (since this will surely result in plenty
 	  of support questions on the mailing list), I do not force you to
-	  enable these additional options.  It is up to you to supply either
+	  enable these additional options. It is up to you to supply either
 	  "ifconfig", "route" and "run-parts" or the "ip" command, either
 	  via busybox or via standalone utilities.
 
@@ -458,7 +458,7 @@ config IP
 	default n
 	help
 	  The "ip" applet is a TCP/IP interface configuration and routing
-	  utility.  You generally don't need "ip" to use busybox with
+	  utility. You generally don't need "ip" to use busybox with
 	  TCP/IP.
 
 config FEATURE_IP_ADDRESS
@@ -558,7 +558,8 @@ config FEATURE_IPCALC_FANCY
 	default y
 	depends on IPCALC
 	help
-	  Adds the options hostname, prefix and silent to the output of "ipcalc".
+	  Adds the options hostname, prefix and silent to the output of
+	  "ipcalc".
 
 config FEATURE_IPCALC_LONG_OPTIONS
 	bool "Enable long options"
@@ -688,7 +689,8 @@ config SLATTACH
 	bool "slattach"
 	default n
 	help
-	  slattach is a small utility to attach network interfaces to serial lines.
+	  slattach is a small utility to attach network interfaces to serial
+	  lines.
 
 config TELNET
 	bool "telnet"
@@ -703,7 +705,7 @@ config FEATURE_TELNET_TTYPE
 	depends on TELNET
 	help
 	  Setting this option will forward the TERM environment variable to the
-	  remote host you are connecting to.  This is useful to make sure that
+	  remote host you are connecting to. This is useful to make sure that
 	  things like ANSI colors and other control sequences behave.
 
 config FEATURE_TELNET_AUTOLOGIN
@@ -722,9 +724,9 @@ config TELNETD
 	select FEATURE_SYSLOG
 	help
 	  A daemon for the TELNET protocol, allowing you to log onto the host
-	  running the daemon.  Please keep in mind that the TELNET protocol
-	  sends passwords in plain text.  If you can't afford the space for an
-	  SSH daemon and you trust your network, you may say 'y' here.  As a
+	  running the daemon. Please keep in mind that the TELNET protocol
+	  sends passwords in plain text. If you can't afford the space for an
+	  SSH daemon and you trust your network, you may say 'y' here. As a
 	  more secure alternative, you should seriously consider installing the
 	  very small Dropbear SSH daemon instead:
 		http://matt.ucc.asn.au/dropbear/dropbear.html
@@ -750,7 +752,7 @@ config TELNETD
 		  mount -t devpts devpts /dev/pts
 
 	  You need to be sure that Busybox has LOGIN and
-	  FEATURE_SUID enabled.  And finally, you should make
+	  FEATURE_SUID enabled. And finally, you should make
 	  certain that Busybox has been installed setuid root:
 
 		chown root.root /bin/busybox
@@ -770,7 +772,7 @@ config TFTP
 	bool "tftp"
 	default n
 	help
-	  This enables the Trivial File Transfer Protocol client program.  TFTP
+	  This enables the Trivial File Transfer Protocol client program. TFTP
 	  is usually used for simple, small transfers such as a root image
 	  for a network-enabled bootloader.
 
@@ -789,7 +791,7 @@ config FEATURE_TFTP_GET
 	default y
 	depends on TFTP || TFTPD
 	help
-	  Add support for the GET command within the TFTP client.  This allows
+	  Add support for the GET command within the TFTP client. This allows
 	  a client to retrieve a file from a TFTP server.
 	  Also enable upload support in tftpd, if tftpd is selected.
 
@@ -798,7 +800,7 @@ config FEATURE_TFTP_PUT
 	default y
 	depends on TFTP || TFTPD
 	help
-	  Add support for the PUT command within the TFTP client.  This allows
+	  Add support for the PUT command within the TFTP client. This allows
 	  a client to transfer a file to a TFTP server.
 	  Also enable download support in tftpd, if tftpd is selected.
 
@@ -815,7 +817,7 @@ config DEBUG_TFTP
 	default n
 	depends on TFTP
 	help
-	  Enable debug settings for tftp.  This is useful if you're running
+	  Enable debug settings for tftp. This is useful if you're running
 	  into problems with tftp as the protocol doesn't help you much when
 	  you run into problems.
 
@@ -830,7 +832,7 @@ config FEATURE_TRACEROUTE_VERBOSE
 	default n
 	depends on TRACEROUTE
 	help
-	  Add some verbosity to traceroute.  This includes amongst other things
+	  Add some verbosity to traceroute. This includes amongst other things
 	  hostnames and ICMP response types.
 
 config FEATURE_TRACEROUTE_SOURCE_ROUTE
@@ -900,12 +902,14 @@ config TCPSVD
 	bool "tcpsvd"
 	default n
 	help
-	  tcpsvd listens on a TCP port and runs a program for each new connection
+	  tcpsvd listens on a TCP port and runs a program for each new
+	  connection.
 
 config UDPSVD
 	bool "udpsvd"
 	default n
 	help
-	  udpsvd listens on an UDP port and runs a program for each new connection
+	  udpsvd listens on an UDP port and runs a program for each new
+	  connection.
 
 endmenu