Age | Commit message (Collapse) | Author |
|
The kernel has very specific rules correlating file type with comment
type, and also SPDX identifiers can't be merged with other comments.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Suggested-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Suggested-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is the worst commit in the whole repo, making the code much less
readable, but so it goes with upstream maintainers.
We are now woefully wrapped at 80 columns.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than abusing the handshake lock, we're much better off just using
a boring atomic64 for this. It's simpler and performs better.
Also, while we're at it, we set the handshake stamp both before and
after the calculations, in case the calculations block for a really long
time waiting for the RNG to initialize. Otherwise it's possible that
when the RNG finally initializes, two handshakes are sent back to back,
which isn't sensible.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Completely rework peer removal to ensure peers don't jump between
contexts and create races.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
And in general tighten up the logic of peer creation.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Use RCU reference counts only when we must, and otherwise use a more
reasonably named function.
Reported-by: Jann Horn <jann@thejh.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This avoids adding one reference per peer to the napi_hash hashtable, as
normally done by netif_napi_add(). Since we potentially could have up to
2^20 peers this would make busy polling very slow globally.
This approach is preferable to having only a single napi struct because
we get one gro_list per peer, which means packets can be combined nicely
even if we have a large number of peers.
This is also done by gro_cells_init() in net/core/gro_cells.c .
Signed-off-by: Thomas Gschwantner <tharre3@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
[Jason: fixed up the flushing of the rx_queue in peer_remove]
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Generally if we're inaccurate by a few nanoseconds, it doesn't matter.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Since this is a network protocol, expirations need to be accounted for,
even across system suspend. On real systems, this isn't a problem, since
we're clearing all keys before suspend. But on Android, where we don't
do that, this is something of a problem. So, we switch to using boottime
instead of jiffies.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
It's good to have SPDX identifiers in all files as the Linux kernel
developers are working to add these identifiers to all files.
Update all files with the correct SPDX license identifier based on the license
text of the project or based on the license in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of the
full boiler plate text.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modified-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Otherwise new handshakes might not occur immediately when the interface
goes up and down.
Also initialize peers to having a proper zeroed handshake jiffies.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Makes it more clear that this _not_ a routing table replacement.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
These changes were suggested by checkpatch.pl, but actually cause big
problems depending on the options. Revert.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
One types:
for (i = 0 ...
So one should also type:
for_each_obj (obj ...
But the upstream kernel style guidelines are insane, and so we must
instead do:
for_each_obj(obj ...
Ugly, but one must choose his battles wisely.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is faster, since it means adding a new peer is O(1) instead of
O(n). It's also safe to do because we're holding the device_update_lock
on both the ++ and the --.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This should only really be contended in extremely exceptional cases, so
changing from a mutex to a spinlock is likely fine.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This removes our dependency on padata and moves to a different mode of
multiprocessing that is more efficient.
This began as Samuel Holland's GSoC project and was gradually
reworked/redesigned/rebased into this present commit, which is a
combination of his initial contribution and my subsequent rewriting and
redesigning.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
DaveM prefers it to be this way per [1].
[1] http://www.spinics.net/lists/netdev/msg443992.html
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
All locks are potentially between user context and softirq,
which means we need to take the _bh variant.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This allows us to precompute the blake2s calls and save cycles, since
hchacha is fast.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|