Age | Commit message (Collapse) | Author |
|
Reported-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This makes `wg show` and `wg showconf` and the like significantly
faster, since we don't have to iterate through every node of the trie
for every single peer. It also makes netlink cursor resumption much less
problematic, since we're just iterating through a list, rather than
having to save a traversal stack.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This causes needless traversal of the trie.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The hashtable allocations are quite large, and cause the device allocation in
the net framework to stall sometimes while it tries to find a contiguous region
that can fit the device struct:
[<0000000000000000>] __switch_to+0x94/0xb8
[<0000000000000000>] __alloc_pages_nodemask+0x764/0x7e8
[<0000000000000000>] kmalloc_order+0x20/0x40
[<0000000000000000>] __kmalloc+0x144/0x1a0
[<0000000000000000>] alloc_netdev_mqs+0x5c/0x368
[<0000000000000000>] rtnl_create_link+0x48/0x180
[<0000000000000000>] rtnl_newlink+0x410/0x708
[<0000000000000000>] rtnetlink_rcv_msg+0x190/0x1f8
[<0000000000000000>] netlink_rcv_skb+0x4c/0xf8
[<0000000000000000>] rtnetlink_rcv+0x30/0x40
[<0000000000000000>] netlink_unicast+0x18c/0x208
[<0000000000000000>] netlink_sendmsg+0x19c/0x348
[<0000000000000000>] sock_sendmsg+0x3c/0x58
[<0000000000000000>] ___sys_sendmsg+0x290/0x2b0
[<0000000000000000>] __sys_sendmsg+0x58/0xa0
[<0000000000000000>] SyS_sendmsg+0x10/0x20
[<0000000000000000>] el0_svc_naked+0x34/0x38
[<0000000000000000>] 0xffffffffffffffff
To fix the allocation stalls, decouple the hashtable allocations from the device
allocation and allocate the hashtables with kvmalloc's implicit __GFP_NORETRY
so that the allocations fall back to vmalloc with little resistance.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
In WireGuard, the underlying UDP socket lives in the namespace where the
interface was created and doesn't move if the interface is moved. This
allows one to create the interface in some privileged place that has
Internet access, and then move it into a container namespace that only
has the WireGuard interface for egress. Consider the following
situation:
1. Interface created in namespace A. Socket therefore lives in namespace A.
2. Interface moved to namespace B. Socket remains in namespace A.
3. Namespace B now has access to the interface and changes the listen
port and/or fwmark of socket. Change is reflected in namespace A.
This behavior is arguably _fine_ and perhaps even expected or
acceptable. But there's also an argument to be made that B should have
A's cred to do so. So, this patch adds a simple ns_capable check.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This required a bit of pruning of our christmas trees.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
It's not used for anything, and LKML doesn't like the type being used as
an index value.
Suggested-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
I understand why this must be done, though I'm not so happy about having
to do it. In some places, it puts us over 80 chars and we have to break
lines up in further ugly ways. And in general, I think this makes things
harder to read. Yet another thing we must do to please upstream.
Maybe this can be replaced in the future by some kind of automatic
module namespacing logic in the linker, or even combined with LTO and
aggressive symbol stripping.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The kernel has very specific rules correlating file type with comment
type, and also SPDX identifiers can't be merged with other comments.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Suggested-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Suggested-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
While we don't want people to ever use old protocols, people will
complain if the API "changes", so explicitly make the unset protocol
mean the latest, and add a dummy mechanism of specifying the protocol on
a per-peer basis, which we hope nobody actually ever uses.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is the worst commit in the whole repo, making the code much less
readable, but so it goes with upstream maintainers.
We are now woefully wrapped at 80 columns.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Reported-by: Matt Layher <mdlayher@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Use RCU reference counts only when we must, and otherwise use a more
reasonably named function.
Reported-by: Jann Horn <jann@thejh.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Since this is a network protocol, expirations need to be accounted for,
even across system suspend. On real systems, this isn't a problem, since
we're clearing all keys before suspend. But on Android, where we don't
do that, this is something of a problem. So, we switch to using boottime
instead of jiffies.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We don't want the local private key to not correspond with a precomputed
ss or precomputed cookie hash at any intermediate point.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
It's good to have SPDX identifiers in all files as the Linux kernel
developers are working to add these identifiers to all files.
Update all files with the correct SPDX license identifier based on the license
text of the project or based on the license in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of the
full boiler plate text.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modified-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
At somepoint we may need to wg_ namespace these.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This gets us nanoseconds instead of microseconds, which is better, and
we can do this pretty much without freaking out existing userspace,
which doesn't actually make use of the nano/micro seconds field:
zx2c4@thinkpad ~ $ cat a.c
void main()
{
puts(sizeof(struct timeval) == sizeof(struct timespec) ? "success" : "failure");
}
zx2c4@thinkpad ~ $ gcc a.c -m64 && ./a.out
success
zx2c4@thinkpad ~ $ gcc a.c -m32 && ./a.out
success
This doesn't solve y2038 problem, but timespec64 isn't yet a thing in
userspace.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When an interface is down, the socket port can change freely. A socket
will be allocated when the interface comes up, and if a socket can't be
allocated, the interface doesn't come up.
However, a socket port can change while the interface is up. In this
case, if a new socket with a new port cannot be allocated, it's
important to keep the interface in a consistent state. The choices are
either to bring down the interface or to preserve the old socket. This
patch implements the latter.
Reported-by: Marc-Antoine Perennou <keruspe@exherbo.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
These aren't actually valid 25519 points pre-normalization, and doing
this is required to make unsetting private keys based on all zeros.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Makes it more clear that this _not_ a routing table replacement.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
One types:
for (i = 0 ...
So one should also type:
for_each_obj (obj ...
But the upstream kernel style guidelines are insane, and so we must
instead do:
for_each_obj(obj ...
Ugly, but one must choose his battles wisely.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Since the peer list is protected by the device_update_lock, and since
items are removed from the peer list before putting their final
reference, we don't actually need to take a reference when iterating.
This allows us to simplify the macro considerably.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|