Age | Commit message (Collapse) | Author |
|
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
When retrying, if count is not 0, we forget to dequeue another request,
and so the ring fills up and errors out.
Reported-by: Sascha Dierberg <dierberg@dresearch-fe.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We dont use ... in any other present progressive messages except these.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
In 097af6e ("tun: windows: protect reads from closing") we made sure no
functions are running when End() is called, to avoid a UaF. But we still
need to kick that event somehow, so that Read() is allowed to exit, in
order to release the lock. So this commit calls SetEvent, while moving
the closing boolean to be atomic so it can be modified without locks,
and then moves to a WaitGroup for the RCU-like pattern.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When debugging, it's useful to know why a receive func exited.
We were already logging that, but only in the "death spiral" case.
Move the logging up, to capture it always.
Reduce the verbosity, since it is not an error case any more.
Put the receive func name in the log line.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
Reported-by: John Xiong <xiaoyang1258@yeah.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Otherwise the padding doesn't get updated.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The code previously used the old errors channel for checking, rather
than the simpler boolean, which caused issues on shutdown, since the
errors channel was meaningless. However, looking at this exposed a more
basic problem: Close() and all the other functions that check the closed
boolean can race. So protect with a basic RW lock, to ensure that
Close() waits for all pending operations to complete.
Reported-by: Joshua Sjoding <joshua.sjoding@scjalliance.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
If we receive a large UDP packet, don't return an error to receive.go,
which then terminates the receive loop. Instead, simply retry.
Considering Winsock's general finickiness, we might consider other
places where an attacker on the wire can generate error conditions like
this.
Reported-by: Sascha Dierberg <sascha.dierberg@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When we pass the TUN FD to the child, we have to call TUNSIFPID;
otherwise when we close the device, we get a splat in dmesg.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
As of FreeBSD 12.1, there's TUNGIFNAME.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
More kernels!
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is kind of gross but it's better than the alternatives.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Note: this bug is "hidden" by avoiding "death spiral" code path by
6228659 ("device: handle broader range of errors in RoutineReceiveIncoming").
If the code reached "death spiral" mechanism, there would be multiple
double frees happening. This results in a deadlock on iOS, because the
pools are fixed size and goroutine might stop until somebody makes
space in the pool.
This was almost 100% repro on the new ARM Macbooks:
- Build with 'ios' tag for Mac. This will enable bounded pools.
- Somehow call device.IpcSet at least couple of times (update config)
- device.BindUpdate() would be triggered
- RoutineReceiveIncoming would enter "death spiral".
- RoutineReceiveIncoming would stall on double free (pool is already
full)
- The stuck routine would deadlock 'device.closeBindLocked()' function
on line 'netc.stopping.Wait()'
Signed-off-by: Kristupas Antanavičius <kristupas.antanavicius@nordsec.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
By not comparing these with the modulo, the ring became nearly never
full, resulting in completion queue buffers filling up prematurely.
Reported-by: Joshua Sjoding <joshua.sjoding@scjalliance.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Instead of hard-coding exactly two sources from which
to receive packets (an IPv4 source and an IPv6 source),
allow the conn.Bind to specify a set of sources.
Beneficial consequences:
* If there's no IPv6 support on a system,
conn.Bind.Open can choose not to return a receive function for it,
which is simpler than tracking that state in the bind.
This simplification removes existing data races from both
conn.StdNetBind and bindtest.ChannelBind.
* If there are more than two sources on a system,
the conn.Bind no longer needs to add a separate muxing layer.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
RoutineReceiveIncoming exits immediately on net.ErrClosed,
but not on other errors. However, for errors that are known
to be permanent, such as syscall.EAFNOSUPPORT,
we may as well exit immediately instead of retrying.
This considerably speeds up the package device tests right now,
because the Bind sometimes (incorrectly) returns syscall.EAFNOSUPPORT
instead of net.ErrClosed.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
It's not obvious on a first read what the loop is doing.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
This makes it clearer that they are fresh on each attempt,
and avoids the bookkeeping required to clearing them on failure.
Also, remove an unnecessary err != nil.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
The sending code is identical for ipv4 and ipv6;
select the conn, then use it.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
And document a bit.
This name is more idiomatic.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
|
|
|
|
It makes the routing configuration simpler.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Otherwise we wind up deadlocking.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This change allows omitting the tun interface name setting. When the
name is not set, the kernel automatically picks up the tun name and
index.
Signed-off-by: Kay Diam <kay.diam@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
It should be enough to check for the trailing zero name.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Otherwise the netstack module doesn't show up on the package site.
https://github.com/golang/go/issues/43817#issuecomment-764987580
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
There's no way for len(peers)==0 when a current peer has
isRunning==false.
This requires some struct reshuffling so that the uint64 pointer is
aligned.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|