Age | Commit message (Collapse) | Author |
|
When closing a device, packets that are in flight
can make it to SendBuffer, which then returns an error.
Those errors add noise but no light;
they do not reflect an actual problem.
Adding the synchronization required to prevent
this from occurring is currently expensive and error-prone.
Instead, quietly drop such packets instead of
returning an error.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
In each case, the starting waitgroup did nothing but ensure
that the goroutine has launched.
Nothing downstream depends on the order in which goroutines launch,
and if the Go runtime scheduler is so broken that goroutines
don't get launched reasonably promptly, we have much deeper problems.
Given all that, simplify the code.
Passed a race-enabled stress test 25,000 times without failure.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
Picking two free ports to use for a test is difficult.
The free port we selected might no longer be free when we reach
for it a second time.
On my machine, this failure mode led to failures approximately
once per thousand test runs.
Since failures are rare, and threading through and checking for
all possible errors is complicated, fix this with a big hammer:
Retry if either device fails to come up.
Also, if you accidentally pick the same port twice, delightful confusion ensues.
The handshake failures manifest as crypto errors, which look scary.
Again, fix with retries.
To make these retries easier to implement, use testing.T.Cleanup
instead of defer to close devices. This requires Go 1.14.
Update go.mod accordingly. Go 1.13 is no longer supported anyway.
With these fixes, 'go test -race' ran 100,000 times without failure.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
This prevents linking to wintun.dll until it's actually needed, which
should improve startup time.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
It doesn't really matter, because it is only used in tests,
but it does remove some noise from pprof profiles.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
This doesn't cause any practical problems as it is,
but vet (rightly) flags this code as copying a mutex.
It is easy to fix, so do so.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
Minor code cleanup; no functional changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Which really shouldn't happen. But it is a useful information for
troubleshooting.
Signed-off-by: Simon Rozman <simon@rozman.si>
|
|
Signed-off-by: Simon Rozman <simon@rozman.si>
|
|
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
fix panic: send on closed channel when remove peer
Signed-off-by: Haichao Liu <liuhaichao@bytedance.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We let people loading this from resources opt in via:
go build -tags load_wintun_from_rsrc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Simon Rozman <simon@rozman.si>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Simon Rozman <simon@rozman.si>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than having every application using Wintun driver reinvent the
wheel, the Wintun device/adapter/interface management has been moved
from wireguard-go to wintun.dll deployed with Wintun itself.
Signed-off-by: Simon Rozman <simon@rozman.si>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Direct syscalls using unix.Syscall(unix.SYS_*, ...) are discouraged on
macOS and might not be supported in future versions. Switch to use
unix.Connect with unix.SockaddrCtl instead.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Direct syscalls using unix.Syscall(unix.SYS_*, ...) are discouraged on
macOS and might not be supported in future versions. Switch to use
unix.Ioctl{Get,Set}IfreqMTU to get and set an interface's MTU.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Direct syscalls using unix.Syscall(unix.SYS_*, ...) are discouraged on
macOS and might not be supported in future versions. Switch to use
unix.IoctlCtlInfo to get the kernel control info.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Direct syscalls using unix.Syscall(unix.SYS_*, ...) are discouraged on
macOS and might not be supported in future versions. Instead, use the
existing unix.GetsockoptString wrapper to get the interface name.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This adds the fixes for golang/go#41868 which are needed to build
wireguard without direct syscalls on macOS.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
[Jason: ran go mod tidy.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Frank Werner <mail@hb9fxq.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Riobard Zhan <me@riobard.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Riobard Zhan <me@riobard.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Bits / Bytes-per-Word misses the step of also dividing by Bits-per-Byte,
which we need in order for this to make sense.
Reported-by: Riobard Zhan <me@riobard.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Sina Siadat <siadat@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Both wireguard-windows and wireguard-android access Bind
directly for these methods now.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Use the RTMGRP_IPV4_ROUTE const from x/sys/unix instead of using the
corresponding RTNLGRP_IPV4_ROUTE const to create the multicast groups
mask.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Peers are currently removed after Device's goroutines are signaled to stop,
but without waiting for them to actually do so, which is racy.
For example, RoutineHandshake may be in Peer.SendKeepalive
when the corresponding peer is removed, which closes its nonce channel.
This causes a send on a closed channel, as observed in tailscale/tailscale#487.
This patch seems to be the correct synchronizing action:
Peer's goroutines are receivers and handle channel closure gracefully,
so Device's goroutines are the ones that should be fully stopped first.
Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>
|
|
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
|
|
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
|
|
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Another thing never tested ever.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This was evidently never tested before committing.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Reported-by: Jayakumar S <jayakumar82.s@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
In the presence of preemption, the current test may fail transiently.
This uses static test data instead to ensure consistent behavior.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Due to the use of the new errors module, we now require at least 1.13
instead of 1.12.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|