strings: update from crowdin

This is after doing a rebuild on the crowdin side.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

1 files changed, 18 insertions, 15 deletions

diff --git a/ui/src/main/res/values-zh-rCN/strings.xml b/ui/src/main/res/values-zh-rCN/strings.xml
index 24c5b6c3..7734c076 100644
--- a/ui/src/main/res/values-zh-rCN/strings.xml
+++ b/ui/src/main/res/values-zh-rCN/strings.xml
@@ -31,10 +31,10 @@
     <string name="exclude_from_tunnel">不生效</string>
     <string name="include_in_tunnel">生效</string>
     <plurals name="include_n_applications">
-        <item quantity="other">设定 %d 个应用</item>
+        <item quantity="other">选定 %d 个应用</item>
     </plurals>
     <plurals name="exclude_n_applications">
-        <item quantity="other">设定 %d 个应用</item>
+        <item quantity="other">选定 %d 个应用</item>
     </plurals>
     <plurals name="persistent_keepalive_seconds_unit">
         <item quantity="other">每隔 %d 秒</item>
@@ -46,14 +46,14 @@
     <string name="add_peer">添加节点</string>
     <string name="addresses">局域网 IP 地址</string>
     <string name="applications">应用过滤</string>
-    <string name="allow_remote_control_intents_summary_off">外部应用当前不能控制隧道（不建议勾选）</string>
-    <string name="allow_remote_control_intents_summary_on">外部应用当前能够控制隧道（面向高级用户）</string>
+    <string name="allow_remote_control_intents_summary_off">不允许外部应用控制隧道（推荐）</string>
+    <string name="allow_remote_control_intents_summary_on">允许外部应用控制隧道（面向高级用户）</string>
     <string name="allow_remote_control_intents_title">授权外部控制</string>
     <string name="allowed_ips">路由的 IP 地址（段）</string>
     <string name="bad_config_context">%1$s 的 %2$s 字段</string>
     <string name="bad_config_context_top_level">%s</string>
     <string name="bad_config_error">在 %2$s发生了%1$s的问题</string>
-    <string name="bad_config_explanation_pka">：必须为正整数且不超过 65535</string>
+    <string name="bad_config_explanation_pka">：必须为不超过 65535 的正整数</string>
     <string name="bad_config_explanation_positive_number">：必须为正整数</string>
     <string name="bad_config_explanation_udp_port">：必须为有效的 UDP 端口号</string>
     <string name="bad_config_reason_invalid_key">密钥无效</string>
@@ -66,6 +66,8 @@
     <string name="bad_config_reason_unknown_section">节未知</string>
     <string name="bad_config_reason_value_out_of_range">数值超出范围</string>
     <string name="bad_extension_error">扩展名必须为 .conf 或 .zip</string>
+    <string name="error_no_qr_found">图片中未发现二维码</string>
+    <string name="error_qr_checksum">二维码校验失败</string>
     <string name="cancel">取消</string>
     <string name="config_delete_error">无法删除配置 “%s”</string>
     <string name="config_exists_error">“%s” 的配置已存在</string>
@@ -91,10 +93,11 @@
     <string name="tv_delete">选择要删除的隧道</string>
     <string name="tv_select_a_storage_drive">选择一个存储驱动器</string>
     <string name="tv_no_file_picker">请安装一个文件管理工具以浏览文件</string>
-    <string name="tv_add_tunnel_get_started">添加第一个隧道</string>
+    <string name="tv_add_tunnel_get_started">添加第一条网络隧道</string>
     <string name="disable_config_export_title">禁止导出配置</string>
     <string name="disable_config_export_description">禁止导出配置可降低私钥泄露的风险</string>
     <string name="dns_servers">DNS 服务器</string>
+    <string name="dns_search_domains">搜索域名</string>
     <string name="edit">编辑</string>
     <string name="endpoint">对端</string>
     <string name="error_down">断开连接时出错：%s</string>
@@ -113,7 +116,7 @@
     <string name="import_error">无法导入隧道：%s</string>
     <string name="import_from_qr_code">从二维码导入隧道</string>
     <string name="import_success">导入了 “%s”</string>
-    <string name="interface_title">接口 / Interface</string>
+    <string name="interface_title">本地（Interface）</string>
     <string name="key_contents_error">密钥中含有错误字符</string>
     <string name="key_length_error">密钥长度错误</string>
     <string name="key_length_explanation_base64">：WireGuard 的 Base64 密钥长度必须为 44 个字符（32 字节）</string>
@@ -129,10 +132,10 @@
     <string name="log_viewer_pref_title">查看应用日志</string>
     <string name="log_viewer_title">日志</string>
     <string name="logcat_error">无法运行 logcat： </string>
-    <string name="module_disabler_disabled_summary">内核空间的模块性能较强，但可能不稳定</string>
-    <string name="module_disabler_disabled_title">启用内核模块</string>
-    <string name="module_disabler_enabled_summary">用户空间的模块性能较弱，但稳定性更好</string>
-    <string name="module_disabler_enabled_title">停用内核模块</string>
+    <string name="module_enabler_disabled_summary">WireGuard-Andorid 的内核模块尚处于实验阶段。它能够增强性能，但存在潜在的不稳定因素，请谨慎开启</string>
+    <string name="module_enabler_disabled_title">启用内核模块</string>
+    <string name="module_enabler_enabled_summary">用户空间的模块性能较弱，但稳定性更好</string>
+    <string name="module_enabler_enabled_title">停用内核模块</string>
     <string name="module_installer_error">发生错误，请重试</string>
     <string name="module_installer_initial">使用内核模块可以提升性能（实验性）</string>
     <string name="module_installer_not_found">没有可用于此设备的模块</string>
@@ -153,7 +156,7 @@
     <string name="parse_error_inet_network">\u0020IP 网络</string>
     <string name="parse_error_integer">数字</string>
     <string name="parse_error_reason">无法解析%1$s “%2$s”\u0020</string>
-    <string name="peer">节点 / Peer</string>
+    <string name="peer">远程（Peer）</string>
     <string name="permission_description">自由控制 WireGuard 隧道的开启或关闭，但可能会导致流量误传</string>
     <string name="permission_label">控制 WireGuard 隧道</string>
     <string name="persistent_keepalive">连接保活间隔</string>
@@ -172,7 +175,7 @@
     <string name="shell_marker_count_error">Shell 应获取 4 个标记，获取到 %d 个</string>
     <string name="shell_start_error">Shell 启动失败：%d</string>
     <string name="success_application_will_restart">成功，应用即将重启…</string>
-    <string name="toggle_all">反选</string>
+    <string name="toggle_all">全选</string>
     <string name="toggle_error">切换隧道状态时出错：%s</string>
     <string name="tools_installer_already">wg 与 wg-quick 已安装</string>
     <string name="tools_installer_failure">无法安装命令行工具（尚未获取 root 权限？）</string>
@@ -216,8 +219,8 @@
     <string name="zip_export_success">已保存至 “%s”</string>
     <string name="zip_export_summary">zip 压缩包将保存至下载文件夹</string>
     <string name="zip_export_title">导出隧道配置</string>
-    <string name="biometric_prompt_zip_exporter_title">导出配置需要认证指纹</string>
-    <string name="biometric_prompt_private_key_title">查看私钥需要认证指纹</string>
+    <string name="biometric_prompt_zip_exporter_title">导出配置前需要通过认证</string>
+    <string name="biometric_prompt_private_key_title">查看私钥前需要通过认证</string>
     <string name="biometric_auth_error">认证失败</string>
     <string name="biometric_auth_error_reason">认证失败：%s</string>
 </resources>