diff options
| -rw-r--r-- | include/linux/nl80211.h | 1109 |
1 files changed, 915 insertions, 194 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c2efea9..f97f5ad 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2021 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -72,7 +72,7 @@ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: * - a setup station entry is added, not yet authorized, without any rate - * or capability information, this just exists to avoid race conditions + * or capability information; this just exists to avoid race conditions * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid * to add rate and capability information to the station and at the same * time mark it authorized. @@ -87,7 +87,7 @@ * DOC: Frame transmission/registration support * * Frame transmission and registration support exists to allow userspace - * management entities such as wpa_supplicant react to management frames + * management entities such as wpa_supplicant to react to management frames * that are not being handled by the kernel. This includes, for example, * certain classes of action frames that cannot be handled in the kernel * for various reasons. @@ -113,7 +113,7 @@ * * Frame transmission allows userspace to send for example the required * responses to action frames. It is subject to some sanity checking, - * but many frames can be transmitted. When a frame was transmitted, its + * but many frames can be transmitted. When a frame is transmitted, its * status is indicated to the sending socket. * * For more technical details, see the corresponding command descriptions @@ -123,7 +123,7 @@ /** * DOC: Virtual interface / concurrency capabilities * - * Some devices are able to operate with virtual MACs, they can have + * Some devices are able to operate with virtual MACs; they can have * more than one virtual interface. The capability handling for this * is a bit complex though, as there may be a number of restrictions * on the types of concurrency that are supported. @@ -135,7 +135,7 @@ * Once concurrency is desired, more attributes must be observed: * To start with, since some interface types are purely managed in * software, like the AP-VLAN type in mac80211 for example, there's - * an additional list of these, they can be added at any time and + * an additional list of these; they can be added at any time and * are only restricted by some semantic restrictions (e.g. AP-VLAN * cannot be added without a corresponding AP interface). This list * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. @@ -164,17 +164,17 @@ * Packet coalesce feature helps to reduce number of received interrupts * to host by buffering these packets in firmware/hardware for some * predefined time. Received interrupt will be generated when one of the - * following events occur. + * following events occurs. * a) Expiration of hardware timer whose expiration time is set to maximum * coalescing delay of matching coalesce rule. - * b) Coalescing buffer in hardware reaches it's limit. + * b) Coalescing buffer in hardware reaches its limit. * c) Packet doesn't match any of the configured coalesce rules. * * User needs to configure following parameters for creating a coalesce * rule. * a) Maximum coalescing delay * b) List of packet patterns which needs to be matched - * c) Condition for coalescence. pattern 'match' or 'no match' + * c) Condition for coalescence: pattern 'match' or 'no match' * Multiple such rules can be created. */ @@ -213,7 +213,7 @@ /** * DOC: FILS shared key authentication offload * - * FILS shared key authentication offload can be advertized by drivers by + * FILS shared key authentication offload can be advertised by drivers by * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support * FILS shared key authentication offload should be able to construct the * authentication and association frames for FILS shared key authentication and @@ -239,7 +239,7 @@ * The PMKSA can be maintained in userspace persistently so that it can be used * later after reboots or wifi turn off/on also. * - * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS + * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS * capable AP supporting PMK caching. It specifies the scope within which the * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based @@ -290,17 +290,60 @@ * If the configuration needs to be applied for specific peer then the MAC * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the * configuration will be applied for all the connected peers in the vif except - * any peers that have peer specific configuration for the TID by default; if - * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values + * any peers that have peer-specific configuration for the TID by default; if + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values * will be overwritten. * - * All this configuration is valid only for STA's current connection - * i.e. the configuration will be reset to default when the STA connects back + * All this configuration is valid only for STA's current connection, + * i.e., the configuration will be reset to default when the STA connects back * after disconnection/roaming, and this configuration will be cleared when * the interface goes down. */ /** + * DOC: FILS shared key crypto offload + * + * This feature is applicable to drivers running in AP mode. + * + * FILS shared key crypto offload can be advertised by drivers by setting + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support + * FILS shared key crypto offload should be able to encrypt and decrypt + * association frames for FILS shared key authentication as per IEEE 802.11ai. + * With this capability, for FILS key derivation, drivers depend on userspace. + * + * After FILS key derivation, userspace shares the FILS AAD details with the + * driver and the driver stores the same to use in decryption of association + * request and in encryption of association response. The below parameters + * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. + * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA + * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption + * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * Once the association is done, the driver cleans the FILS AAD data. + */ + +/** + * DOC: Multi-Link Operation + * + * In Multi-Link Operation, a connection between two MLDs utilizes multiple + * links. To use this in nl80211, various commands and responses now need + * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. + * Additionally, various commands that need to operate on a specific link + * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to + * use %NL80211_CMD_START_AP or similar functions. + */ + +/** + * DOC: OWE DH IE handling offload + * + * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate + * kernel/application space to avoid DH IE handling. When this flag is + * advertised, the driver/device will take care of DH IE inclusion and + * processing of peer DH IE to generate PMK. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -337,17 +380,28 @@ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from * userspace to request deletion of a virtual interface, then requires - * attribute %NL80211_ATTR_IFINDEX. + * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are + * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, + * and if this command is used for the transmitting interface, then all + * the non-transmitting interfaces are deleted as well. * * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified - * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC + * represents peer's MLD address for MLO pairwise key. For MLO group key, + * the link is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * For MLO connection, the link to set default key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, - * and %NL80211_ATTR_KEY_SEQ attributes. + * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents + * peer's MLD address for MLO pairwise key. The link to add MLO + * group key is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. + * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address + * for MLO pairwise key. The link to delete group key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * * @NL80211_CMD_GET_BEACON: (not used) * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface @@ -359,8 +413,8 @@ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, - * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. @@ -379,27 +433,24 @@ * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in + * %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type * of disconnection indication should be sent to the station * (Deauthentication or Disassociation frame and reason code for that - * frame). + * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove + * stations connected and using at least that link as one of its links. * * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * %NL80211_ATTR_MAC. - * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all mesh paths, on the interface identified - * by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * %NL80211_ATTR_IFINDEX. * @@ -420,15 +471,15 @@ * after being queried by the kernel. CRDA replies by sending a regulatory * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our * current alpha2 if it found a match. It also provides - * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each - * regulatory rule is a nested set of attributes given by - * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and - * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by - * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and - * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain - * to the specified ISO/IEC 3166-1 alpha2 country code. The core will - * store this as a valid request and then query userspace for it. + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. * * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX @@ -466,7 +517,7 @@ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, * scheduled scan will run in an infinite loop with the specified interval. - * These attributes are mutually exculsive, + * These attributes are mutually exclusive, * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if * NL80211_ATTR_SCHED_SCAN_PLANS is defined. * If for some reason scheduled scan is aborted by the driver, all scan @@ -497,7 +548,7 @@ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface * is brought down while a scheduled scan was running. * - * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation * or noise level * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) @@ -508,40 +559,41 @@ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier - * advertized by a FILS capable AP identifying the scope of PMKSA in an + * advertised by a FILS capable AP identifying the scope of PMKSA in an * ESS. * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS - * authentication. + * authentication. Additionally in case of SAE offload and OWE offloads + * PMKSA entry can be deleted using %NL80211_ATTR_SSID. * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain - * has been changed and provides details of the request information - * that caused the change such as who initiated the regulatory request - * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx - * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if - * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or - * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain - * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is - * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on - * to (%NL80211_ATTR_REG_ALPHA2). + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon - * has been found while world roaming thus enabling active scan or - * any mode of operation that initiates TX (beacons) on a channel - * where we would not have been able to do either before. As an example - * if you are world roaming (regulatory domain set to world or if your - * driver is using a custom world roaming regulatory domain) and while - * doing a passive scan on the 5 GHz band you find an AP there (if not - * on a DFS channel) you will now be able to actively scan for that AP - * or use AP mode on your card on that same channel. Note that this will - * never be used for channels 1-11 on the 2 GHz band as they are always - * enabled world wide. This beacon hint is only sent if your device had - * either disabled active scanning or beaconing on a channel. We send to - * userspace the wiphy on which we removed a restriction from - * (%NL80211_ATTR_WIPHY) and the channel on which this occurred - * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) - * the beacon hint was processed. + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. * * @NL80211_CMD_AUTHENTICATE: authentication request and notification. * This command is used both as a command (request to authenticate) and @@ -552,7 +604,7 @@ * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * the SSID (mainly for association, but is included in authentication * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + - * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the * authentication type. %NL80211_ATTR_IE is used to define IEs * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added @@ -727,6 +779,13 @@ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA * counters which will be updated to the current value. This attribute * is used during CSA period. + * For TX on an MLD, the frequency can be omitted and the link ID be + * specified, or if transmitting to a known peer MLD (with MLD addresses + * in the frame) both can be omitted and the link will be selected by + * lower layers. + * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may + * be included to indicate the ack TX timestamp. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. This command is @@ -737,7 +796,9 @@ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies * the TX command and %NL80211_ATTR_FRAME includes the contents of the * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. + * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the + * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the ack RX timestamp. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. * @@ -752,7 +813,7 @@ * reached. * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ * and the attributes determining channel width) the given interface - * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. + * (identified by %NL80211_ATTR_IFINDEX) shall operate on. * In case multiple channels are supported by the device, the mechanism * with which it switches channels is implementation-defined. * When a monitor interface is given, it can only switch channel while @@ -824,7 +885,7 @@ * inform userspace of the new replay counter. * * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace - * of PMKSA caching dandidates. + * of PMKSA caching candidates. * * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). * In addition, this can be used as an event to request userspace to take @@ -860,7 +921,7 @@ * * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface * by sending a null data frame to it and reporting when the frame is - * acknowleged. This is used to allow timing out inactive clients. Uses + * acknowledged. This is used to allow timing out inactive clients. Uses * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a * direct reply with an %NL80211_ATTR_COOKIE that is later used to match * up the event with the request. The event includes the same data and @@ -1054,7 +1115,7 @@ * current configuration is not changed. If it is present but * set to zero, the configuration is changed to don't-care * (i.e. the device can decide what to do). - * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. * @@ -1071,17 +1132,27 @@ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously * configured PMK for the authenticator address identified by * %NL80211_ATTR_MAC. - * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was - * completed successfully. Drivers that support 4 way handshake offload - * should send this event after indicating 802.1X FT assocation with - * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT - * should be indicated instead. + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and + * open for regular data traffic. For STA/P2P-client, this event is sent + * with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P- + * client MAC address. + * Drivers that support 4 way handshake offload should send this event for + * STA/P2P-client after successful 4-way HS or after 802.1X FT following + * NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way + * handshake offload should send this event on successful completion of + * 4-way handshake with the peer (STA/P2P-client). * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request * and RX notification. This command is used both as a request to transmit * a control port frame and as a notification that a control port frame * has been received. %NL80211_ATTR_FRAME is used to specify the * frame contents. The frame is the raw EAPoL data, without ethernet or * 802.11 headers. + * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and + * its effect will depend on the destination: If the destination is known + * to be an MLD, this will be used as a hint to select the link to transmit + * the frame on. If the destination is not an MLD, this will select both + * the link to transmit on and the source address will be set to the link + * address of that link. * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added * indicating the protocol type of the received frame; whether the frame @@ -1106,6 +1177,23 @@ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH * command interface. * + * Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in + * %NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO + * during the authentication offload in STA mode while connecting to MLD + * APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability + * in %NL80211_CMD_CONNECT to know whether the user space supports enabling + * MLO during the authentication offload or not. + * User space should enable MLO during the authentication only when it + * receives the AP MLD address in authentication offload request. User + * space shouldn't enable MLO when the authentication offload request + * doesn't indicate the AP MLD address even if the AP is MLO capable. + * User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and + * interface address identified by %NL80211_ATTR_IFINDEX as self MLD + * address. User space and host driver to use MLD addresses in RA, TA and + * BSSID fields of the frames between them, and host driver translates the + * MLD addresses to/from link addresses based on the link chosen for the + * authentication. + * * Host driver reports this status on an authentication failure to the * user space through the connect result as the user space would have * initiated the connection through the connect request. @@ -1200,6 +1288,47 @@ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change * has completed * + * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - + * &NL80211_ATTR_MAC - for STA MAC address + * &NL80211_ATTR_FILS_KEK - for KEK + * &NL80211_ATTR_FILS_NONCES - for FILS Nonces + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * @NL80211_CMD_ASSOC_COMEBACK: notification about an association + * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC + * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to + * specify the timeout value. + * + * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The + * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. + * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come + * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links + * in preparation for e.g. roaming to a regular (non-MLO) AP. + * + * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station + * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station + * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station + * + * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing + * measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC + * is included, enable/disable HW timestamping only for frames to/from the + * specified MAC address. Otherwise enable/disable HW timestamping for + * all TM/FTM frames (including ones that were enabled with specific MAC + * address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable + * HW timestamping. + * The number of peers that HW timestamping can be enabled for concurrently + * is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS. + * + * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD + * setup links due to AP MLD removing the corresponding affiliated APs with + * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide + * information about the removed STA MLD setup links. + * + * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a + * non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and + * %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the + * TID to Link mapping for downlink/uplink traffic. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1440,6 +1569,23 @@ enum nl80211_commands { NL80211_CMD_COLOR_CHANGE_ABORTED, NL80211_CMD_COLOR_CHANGE_COMPLETED, + NL80211_CMD_SET_FILS_AAD, + + NL80211_CMD_ASSOC_COMEBACK, + + NL80211_CMD_ADD_LINK, + NL80211_CMD_REMOVE_LINK, + + NL80211_CMD_ADD_LINK_STA, + NL80211_CMD_MODIFY_LINK_STA, + NL80211_CMD_REMOVE_LINK_STA, + + NL80211_CMD_SET_HW_TIMESTAMP, + + NL80211_CMD_LINKS_REMOVED, + + NL80211_CMD_SET_TID_TO_LINK_MAPPING, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1564,21 +1710,21 @@ enum nl80211_commands { * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path - * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at * &enum nl80211_mpath_info. * * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the - * current regulatory domain should be set to or is already set to. - * For example, 'CR', for Costa Rica. This attribute is used by the kernel - * to query the CRDA to retrieve one regulatory domain. This attribute can - * also be used by userspace to query the kernel for the currently set - * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11 country information element to identify a country. - * Users can also simply ask the wireless core to set regulatory domain - * to a specific alpha2. + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11 country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory * rules. * @@ -1621,9 +1767,9 @@ enum nl80211_commands { * @NL80211_ATTR_BSS: scan result BSS * * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain - * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently - * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) * * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies * an array of command numbers (i.e. a mapping index to command number) @@ -1642,15 +1788,15 @@ enum nl80211_commands { * a u32 * * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _before_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _after_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* * * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported * cipher suites @@ -1697,7 +1843,7 @@ enum nl80211_commands { * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth - * frames are not forwared over the control port. + * frames are not forwarded over the control port. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -1711,12 +1857,6 @@ enum nl80211_commands { * that protected APs should be used. This is also used with NEW_BEACON to * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON - * to indicate which unicast key ciphers will be used with the connection - * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which group key cipher will be used with the connection (a - * u32). * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). @@ -1747,6 +1887,7 @@ enum nl80211_commands { * with %NL80211_KEY_* sub-attributes * * @NL80211_ATTR_PID: Process ID of a network namespace. + * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace. * * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for * dumps. This number increases whenever the object list being @@ -1801,6 +1942,7 @@ enum nl80211_commands { * * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. + * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32) * * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. * @@ -1834,10 +1976,10 @@ enum nl80211_commands { * bit. Depending on which antennas are selected in the bitmap, 802.11n * drivers can derive which chainmasks to use (if all antennas belonging to * a particular chain are disabled this chain should be disabled) and if - * a chain has diversity antennas wether diversity should be used or not. + * a chain has diversity antennas whether diversity should be used or not. * HT capabilities (STBC, TX Beamforming, Antenna selection) can be * derived from the available chains after applying the antenna mask. - * Non-802.11n drivers can derive wether to use diversity or not. + * Non-802.11n drivers can derive whether to use diversity or not. * Drivers may reject configurations or RX/TX mask combinations they cannot * support by returning -EINVAL. * @@ -1910,6 +2052,10 @@ enum nl80211_commands { * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes * defined in &enum nl80211_if_combination_attrs. + * If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set), + * this attribute contains the interface combinations of the first radio. + * See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy + * combinations for the sum of all radios. * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that * are managed in software: interfaces of these types aren't subject to @@ -1998,6 +2144,9 @@ enum nl80211_commands { * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable * this feature during association. This is a flag attribute. * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * ATTR_HT_CAPABILITY to which attention should be paid. * Currently, only mac80211 NICs support this feature. @@ -2007,6 +2156,12 @@ enum nl80211_commands { * All values are treated as suggestions and may be ignored * by the driver as required. The actual values may be seen in * the station debugfs ht_caps file. + * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the + * ATTR_VHT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs vht_caps file. * * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country * abides to when initiating radiation on DFS channels. A country maps @@ -2265,7 +2420,7 @@ enum nl80211_commands { * scheduled scan is started. Or the delay before a WoWLAN * net-detect scan is started, counting from the moment the * system is suspended. This value is a u32, in seconds. - + * * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device * is operating in an indoor environment. * @@ -2299,8 +2454,10 @@ enum nl80211_commands { * * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, - * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per - * interface type. + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and + * other interface-type specific capabilities per interface type. For MLO, + * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are + * present. * * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO * groupID for monitor mode. @@ -2405,7 +2562,7 @@ enum nl80211_commands { * from successful FILS authentication and is used with * %NL80211_CMD_CONNECT. * - * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP + * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP * identifying the scope of PMKSAs. This is used with * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. * @@ -2436,7 +2593,9 @@ enum nl80211_commands { * space supports external authentication. This attribute shall be used * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver * may offload authentication processing to user space if this capability - * is indicated in the respective requests from the user space. + * is indicated in the respective requests from the user space. (This flag + * attribute deprecated for %NL80211_CMD_START_AP, use + * %NL80211_ATTR_AP_SETTINGS_FLAGS) * * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. @@ -2557,11 +2716,13 @@ enum nl80211_commands { * * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS * discovery. It is a nested attribute, see - * &enum nl80211_fils_discovery_attributes. + * &enum nl80211_fils_discovery_attributes. Userspace should pass an empty + * nested attribute to disable this feature and delete the templates. * * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure * unsolicited broadcast probe response. It is a nested attribute, see - * &enum nl80211_unsol_bcast_probe_resp_attributes. + * &enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty + * nested attribute to disable this feature and delete the templates. * * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) @@ -2593,6 +2754,120 @@ enum nl80211_commands { * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE * information for the time while performing a color switch. * + * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID + * advertisements (MBSSID) parameters in AP mode. + * Kernel uses this attribute to indicate the driver's support for MBSSID + * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. + * Userspace should use this attribute to configure per interface MBSSID + * parameters. + * See &enum nl80211_mbssid_config_attributes for details. + * + * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. + * Mandatory parameter for the transmitting interface to enable MBSSID. + * Optional for the non-transmitting interfaces. + * + * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain + * available for radar/CAC detection on some hw. This chain can't be used + * to transmit or receive frames and it is bounded to a running wdev. + * Background radar/CAC detection allows to avoid the CAC downtime + * switching on a different channel during CAC detection on the selected + * radar channel. + * + * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, + * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be + * used with %NL80211_CMD_START_AP request. + * + * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with + * various commands that need a link ID to operate. + * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some + * per-link information and a link ID. + * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as + * authenticate/associate. + * + * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO + * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not + * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. + * + * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of + * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this + * attribute is not present userspace shall consider maximum number of AKM + * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum + * number prior to the introduction of this attribute. + * + * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) + * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) + * + * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the ack TX timestamp. + * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the incoming frame RX timestamp. + * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent + * (re)associations. + * + * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest + * bit corresponds to the lowest 20 MHz channel. Each bit set to 1 + * indicates that the sub-channel is punctured. Higher 16 bits are + * reserved. + * + * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW + * timestamping can be enabled for concurrently (u16), a wiphy attribute. + * A value of 0xffff indicates setting for all peers (i.e. not specifying + * an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported. + * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should + * be enabled or not (flag attribute). + * + * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for + * reduced neighbor report (RNR) elements. This attribute can be used + * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled. + * Userspace is responsible for splitting the RNR into multiple + * elements such that each element excludes the non-transmitting + * profiles already included in the MBSSID element + * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon + * will be generated by adding MBSSID and RNR elements at the same + * index. If the userspace includes more RNR elements than number of + * MBSSID elements then these will be added in every EMA beacon. + * + * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is + * disabled. + * + * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e. + * include BSSes that can only be used in restricted scenarios and/or + * cannot be used at all. + * + * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to + * link mapping. The length is 8 * sizeof(u16). For each TID the link + * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element) + * in Draft P802.11be_D4.0. + * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to + * link mapping. The length is 8 * sizeof(u16). For each TID the link + * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element) + * in Draft P802.11be_D4.0. + * + * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with + * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs + * are used on this connection + * + * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios + * belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs. + * + * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the + * supported interface combinations for all radios combined. In each + * nested item, it contains attributes defined in + * &enum nl80211_if_combination_attrs. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3096,6 +3371,51 @@ enum nl80211_attrs { NL80211_ATTR_COLOR_CHANGE_COLOR, NL80211_ATTR_COLOR_CHANGE_ELEMS, + NL80211_ATTR_MBSSID_CONFIG, + NL80211_ATTR_MBSSID_ELEMS, + + NL80211_ATTR_RADAR_BACKGROUND, + + NL80211_ATTR_AP_SETTINGS_FLAGS, + + NL80211_ATTR_EHT_CAPABILITY, + + NL80211_ATTR_DISABLE_EHT, + + NL80211_ATTR_MLO_LINKS, + NL80211_ATTR_MLO_LINK_ID, + NL80211_ATTR_MLD_ADDR, + + NL80211_ATTR_MLO_SUPPORT, + + NL80211_ATTR_MAX_NUM_AKM_SUITES, + + NL80211_ATTR_EML_CAPABILITY, + NL80211_ATTR_MLD_CAPA_AND_OPS, + + NL80211_ATTR_TX_HW_TIMESTAMP, + NL80211_ATTR_RX_HW_TIMESTAMP, + NL80211_ATTR_TD_BITMAP, + + NL80211_ATTR_PUNCT_BITMAP, + + NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS, + NL80211_ATTR_HW_TIMESTAMP_ENABLED, + + NL80211_ATTR_EMA_RNR_ELEMS, + + NL80211_ATTR_MLO_LINK_DISABLED, + + NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA, + + NL80211_ATTR_MLO_TTLM_DLINK, + NL80211_ATTR_MLO_TTLM_ULINK, + + NL80211_ATTR_ASSOC_SPP_AMSDU, + + NL80211_ATTR_WIPHY_RADIOS, + NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3150,7 +3470,14 @@ enum nl80211_attrs { #define NL80211_HE_MIN_CAPABILITY_LEN 16 #define NL80211_HE_MAX_CAPABILITY_LEN 54 #define NL80211_MAX_NR_CIPHER_SUITES 5 + +/* + * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES + * present in %NL80211_CMD_GET_WIPHY response. + */ #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_EHT_MIN_CAPABILITY_LEN 13 +#define NL80211_EHT_MAX_CAPABILITY_LEN 51 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 @@ -3178,7 +3505,7 @@ enum nl80211_attrs { * and therefore can't be created in the normal ways, use the * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE * commands to create and destroy one - * @NL80211_IF_TYPE_OCB: Outside Context of a BSS + * @NL80211_IFTYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined @@ -3229,6 +3556,7 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a * previously added station into associated state + * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -3241,6 +3569,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, NL80211_STA_FLAG_ASSOCIATED, + NL80211_STA_FLAG_SPP_AMSDU, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -3251,7 +3580,7 @@ enum nl80211_sta_flags { * enum nl80211_sta_p2p_ps_status - station support of P2P PS * * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism - * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism * @NUM_NL80211_P2P_PS_STATUS: number of values */ enum nl80211_sta_p2p_ps_status { @@ -3289,9 +3618,9 @@ enum nl80211_he_gi { /** * enum nl80211_he_ltf - HE long training field - * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec - * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec - * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec + * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec + * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec + * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec */ enum nl80211_he_ltf { NL80211_RATE_INFO_HE_1XLTF, @@ -3320,6 +3649,56 @@ enum nl80211_he_ru_alloc { }; /** + * enum nl80211_eht_gi - EHT guard interval + * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec + */ +enum nl80211_eht_gi { + NL80211_RATE_INFO_EHT_GI_0_8, + NL80211_RATE_INFO_EHT_GI_1_6, + NL80211_RATE_INFO_EHT_GI_3_2, +}; + +/** + * enum nl80211_eht_ru_alloc - EHT RU allocation values + * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation + */ +enum nl80211_eht_ru_alloc { + NL80211_RATE_INFO_EHT_RU_ALLOC_26, + NL80211_RATE_INFO_EHT_RU_ALLOC_52, + NL80211_RATE_INFO_EHT_RU_ALLOC_52P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_106, + NL80211_RATE_INFO_EHT_RU_ALLOC_106P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_242, + NL80211_RATE_INFO_EHT_RU_ALLOC_484, + NL80211_RATE_INFO_EHT_RU_ALLOC_484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_996, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_4x996, +}; + +/** * enum nl80211_rate_info - bitrate information * * These attribute types are used with %NL80211_STA_INFO_TXRATE @@ -3356,8 +3735,22 @@ enum nl80211_he_ru_alloc { * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier * (u8, see &enum nl80211_he_gi) * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) - * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) + * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate + * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) + * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8) + * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier + * (u8, see &enum nl80211_eht_gi) + * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) + * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10) + * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4) + * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate + * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate + * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate + * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate + * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3379,6 +3772,18 @@ enum nl80211_rate_info { NL80211_RATE_INFO_HE_GI, NL80211_RATE_INFO_HE_DCM, NL80211_RATE_INFO_HE_RU_ALLOC, + NL80211_RATE_INFO_320_MHZ_WIDTH, + NL80211_RATE_INFO_EHT_MCS, + NL80211_RATE_INFO_EHT_NSS, + NL80211_RATE_INFO_EHT_GI, + NL80211_RATE_INFO_EHT_RU_ALLOC, + NL80211_RATE_INFO_S1G_MCS, + NL80211_RATE_INFO_S1G_NSS, + NL80211_RATE_INFO_1_MHZ_WIDTH, + NL80211_RATE_INFO_2_MHZ_WIDTH, + NL80211_RATE_INFO_4_MHZ_WIDTH, + NL80211_RATE_INFO_8_MHZ_WIDTH, + NL80211_RATE_INFO_16_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -3433,7 +3838,7 @@ enum nl80211_sta_bss_param { * (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_rate_info + * containing info as possible, see &enum nl80211_rate_info * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) * (u32, from this station) * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) @@ -3462,8 +3867,8 @@ enum nl80211_sta_bss_param { * Contains a nested array of signal strength attributes (u8, dBm) * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. - * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the - * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also + * the 802.11 header (u32, kbps) * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons * (u64) * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) @@ -3649,7 +4054,7 @@ enum nl80211_mpath_flags { * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in - * &enum nl80211_mpath_flags; + * &enum nl80211_mpath_flags; * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination @@ -3689,13 +4094,20 @@ enum nl80211_mpath_info { * capabilities IE * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), * given for all 6 GHz band channels * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are * advertised on this band/for this iftype (binary) + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as + * defined in EHT capabilities element * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ enum nl80211_band_iftype_attr { __NL80211_BAND_IFTYPE_ATTR_INVALID, @@ -3707,6 +4119,10 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -3736,6 +4152,10 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes * the allowed channel bandwidth configurations. * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS + * set subfield, as in the S1G information IE, 5 bytes + * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the + * S1G information IE, 10 bytes * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -3756,6 +4176,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_EDMG_CHANNELS, NL80211_BAND_ATTR_EDMG_BW_CONFIG, + NL80211_BAND_ATTR_S1G_MCS_NSS_SET, + NL80211_BAND_ATTR_S1G_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -3771,7 +4194,7 @@ enum nl80211_band_attr { * @NL80211_WMMR_CW_MAX: Maximum contention window slot. * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. - * @nl80211_WMMR_MAX: highest possible wmm rule. + * @NL80211_WMMR_MAX: highest possible wmm rule. * @__NL80211_WMMR_LAST: Internal use. */ enum nl80211_wmm_rule { @@ -3793,15 +4216,16 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current * regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation - * are permitted on this channel, this includes sending probe - * requests, or modes of operation that require beaconing. + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. + * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS * (enum nl80211_dfs_state) - * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long * this channel is in this DFS state. * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this * channel as the control channel @@ -3851,6 +4275,25 @@ enum nl80211_wmm_rule { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible + * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that + * is allowed on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is + * allowed for peer-to-peer or adhoc communication under the control + * of a DFS master which operates on the same channel (FCC-594280 D01 + * Section B.3). Should be used together with %NL80211_RRF_DFS only. + * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP + * not allowed using this channel + * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP + * not allowed using this channel + * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor + * mode despite other (regulatory) restrictions, even if the channel is + * otherwise completely disabled. + * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a + * very low power (VLP) AP, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3887,6 +4330,14 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_4MHZ, NL80211_FREQUENCY_ATTR_8MHZ, NL80211_FREQUENCY_ATTR_16MHZ, + NL80211_FREQUENCY_ATTR_NO_320MHZ, + NL80211_FREQUENCY_ATTR_NO_EHT, + NL80211_FREQUENCY_ATTR_PSD, + NL80211_FREQUENCY_ATTR_DFS_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT, + NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, + NL80211_FREQUENCY_ATTR_CAN_MONITOR, + NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3899,6 +4350,10 @@ enum nl80211_frequency_attr { #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ NL80211_FREQUENCY_ATTR_IR_CONCURRENT +#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \ + NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT +#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \ + NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT /** * enum nl80211_bitrate_attr - bitrate attributes @@ -3921,16 +4376,16 @@ enum nl80211_bitrate_attr { }; /** - * enum nl80211_initiator - Indicates the initiator of a reg domain request + * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world - * regulatory domain. + * regulatory domain. * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the - * regulatory domain. + * regulatory domain. * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the - * wireless core it thinks its knows the regulatory domain we should be in. + * wireless core it thinks its knows the regulatory domain we should be in. * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an - * 802.11 country information element with regulatory information it - * thinks we should consider. cfg80211 only processes the country + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country * code from the IE, and relies on the regulatory domain information * structure passed by userspace (CRDA) from our wireless-regdb. * If a channel is enabled but the country code indicates it should @@ -3949,11 +4404,11 @@ enum nl80211_reg_initiator { * to a specific country. When this is set you can count on the * ISO / IEC 3166 alpha2 country code being valid. * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory - * domain. + * domain. * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom - * driver specific world regulatory domain. These do not apply system-wide - * and are only applicable to the individual devices which have requested - * them to be applied. + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product * of an intersection between two regulatory domains -- the previously * set regulatory domain on the system and the last accepted regulatory @@ -3970,23 +4425,25 @@ enum nl80211_reg_type { * enum nl80211_reg_rule_attr - regulatory rule attributes * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional - * considerations for a given frequency range. These are the - * &enum nl80211_reg_rule_flags. + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory - * rule in KHz. This is not a center of frequency but an actual regulatory - * band edge. + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule - * in KHz. This is not a center a frequency but an actual regulatory - * band edge. + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain - * for a given frequency range. The value is in mBi (100 * dBi). - * If you don't have one then don't send this. + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for - * a given frequency range. The value is in mBm (100 * dBm). + * a given frequency range. The value is in mBm (100 * dBm). * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. * If not present or 0 default CAC time will be used. + * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm). + * This could be negative. * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number * currently defined * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use @@ -4004,6 +4461,8 @@ enum nl80211_reg_rule_attr { NL80211_ATTR_DFS_CAC_TIME, + NL80211_ATTR_POWER_RULE_PSD, + /* keep last */ __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 @@ -4032,14 +4491,7 @@ enum nl80211_reg_rule_attr { * value as specified by &struct nl80211_bss_select_rssi_adjust. * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching * (this cannot be used together with SSID). - * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the - * band specific minimum rssi thresholds for the bands defined in - * enum nl80211_band. The minimum rssi threshold value(s32) specific to a - * band shall be encapsulated in attribute with type value equals to one - * of the NL80211_BAND_* defined in enum nl80211_band. For example, the - * minimum rssi threshold value for 2.4GHZ band shall be encapsulated - * within an attribute of type NL80211_BAND_2GHZ. And one or more of such - * attributes will be nested within this attribute. + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -4052,7 +4504,7 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, - NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */ /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -4074,8 +4526,9 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, - * this includes probe requests or modes of operation that require - * beaconing. + * this includes probe requests or modes of operation that require + * beaconing. + * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. @@ -4085,6 +4538,17 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed * @NL80211_RRF_NO_HE: HE operation not allowed + * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed + * @NL80211_RRF_NO_EHT: EHT operation not allowed + * @NL80211_RRF_PSD: Ruleset has power spectral density value + * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for + * peer-to-peer or adhoc communication under the control of a DFS master + * which operates on the same channel (FCC-594280 D01 Section B.3). + * Should be used together with %NL80211_RRF_DFS only. + * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed + * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed + * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4103,6 +4567,13 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16, NL80211_RRF_NO_HE = 1<<17, + NL80211_RRF_NO_320MHZ = 1<<18, + NL80211_RRF_NO_EHT = 1<<19, + NL80211_RRF_PSD = 1<<20, + NL80211_RRF_DFS_CONCURRENT = 1<<21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4111,6 +4582,8 @@ enum nl80211_reg_rule_flags { #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ NL80211_RRF_NO_HT40PLUS) #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT +#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT +#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT /* For backport compatibility with older userspace */ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) @@ -4257,8 +4730,8 @@ enum nl80211_mntr_flags { * alternate between Active and Doze states, but may not wake up * for neighbor's beacons. * - * @__NL80211_MESH_POWER_AFTER_LAST - internal use - * @NL80211_MESH_POWER_MAX - highest possible power save level + * @__NL80211_MESH_POWER_AFTER_LAST: internal use + * @NL80211_MESH_POWER_MAX: highest possible power save level */ enum nl80211_mesh_power_mode { @@ -4600,6 +5073,8 @@ enum nl80211_key_mode { * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel + * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -4615,6 +5090,7 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_4, NL80211_CHAN_WIDTH_8, NL80211_CHAN_WIDTH_16, + NL80211_CHAN_WIDTH_320, }; /** @@ -4637,6 +5113,36 @@ enum nl80211_bss_scan_width { }; /** + * enum nl80211_bss_use_for - bitmap indicating possible BSS use + * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection", + * including IBSS/MBSS depending on the type. + * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an + * MLO connection. Note that for an MLO connection, all links including + * the assoc link must have this flag set, and the assoc link must + * additionally have %NL80211_BSS_USE_FOR_NORMAL set. + */ +enum nl80211_bss_use_for { + NL80211_BSS_USE_FOR_NORMAL = 1 << 0, + NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1, +}; + +/** + * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a + * BSS isn't possible + * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't + * supported by the device, and this BSS entry represents one. + * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting + * the AP power type (SP, VLP, AP) that the AP uses. + */ +enum nl80211_bss_cannot_use_reasons { + NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0, + NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1, +}; + +#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \ + NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH + +/** * enum nl80211_bss - netlink attributes for a BSS * * @__NL80211_BSS_INVALID: invalid @@ -4667,7 +5173,7 @@ enum nl80211_bss_scan_width { * elements from a Beacon frame (bin); not present if no Beacon frame has * yet been received * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel - * (u32, enum nl80211_bss_scan_width) + * (u32, enum nl80211_bss_scan_width) - No longer used! * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) * (not present if no beacon frame has been received yet) * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and @@ -4686,6 +5192,16 @@ enum nl80211_bss_scan_width { * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz + * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). + * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. + * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be + * used for, see &enum nl80211_bss_use_for. + * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot + * be used for all or some of the possible uses by the device reporting it, + * even though its presence was detected. + * This is a u64 attribute containing a bitmap of values from + * &enum nl80211_cannot_use_reasons, note that the attribute may be missing + * if no reasons are specified. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4711,6 +5227,10 @@ enum nl80211_bss { NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, NL80211_BSS_FREQUENCY_OFFSET, + NL80211_BSS_MLO_LINK_ID, + NL80211_BSS_MLD_ADDR, + NL80211_BSS_USE_FOR, + NL80211_BSS_CANNOT_USE_REASONS, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4929,6 +5449,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs + * @NL80211_BAND_LC: light communication band (placeholder) * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4938,6 +5459,7 @@ enum nl80211_band { NL80211_BAND_60GHZ, NL80211_BAND_6GHZ, NL80211_BAND_S1GHZ, + NL80211_BAND_LC, NUM_NL80211_BANDS, }; @@ -5057,7 +5579,7 @@ enum nl80211_tx_rate_setting { * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but * per peer instead. - * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates * that the new configuration overrides all previous peer * configurations, otherwise previous peer specific configurations * should be left untouched. @@ -5229,7 +5751,7 @@ struct nl80211_pattern_support { * "TCP connection wakeup" for more details. This is a nested attribute * containing the exact information for establishing and keeping alive * the TCP connection. - * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the * wakeup packet was received on the TCP connection * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the * TCP connection was lost or failed to be established @@ -5258,6 +5780,8 @@ struct nl80211_pattern_support { * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one * frequency, it means that the match occurred in more than one * channel. + * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only. + * Wake up happened due to unprotected deauth or disassoc frame in MFP. * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -5285,6 +5809,7 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, NL80211_WOWLAN_TRIG_NET_DETECT, NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, + NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -5440,7 +5965,7 @@ enum nl80211_attr_coalesce_rule { /** * enum nl80211_coalesce_condition - coalesce rule conditions - * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns * in a rule are matched. * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns * in a rule are not matched. @@ -5504,7 +6029,7 @@ enum nl80211_iface_limit_attrs { * => allows 8 of AP/GO that can have BI gcd >= min gcd * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 - * => allows two STAs on different channels + * => allows two STAs on the same or on different channels * * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 * => allows a STA plus three P2P interfaces @@ -5539,7 +6064,7 @@ enum nl80211_if_combination_attrs { * enum nl80211_plink_state - state of a mesh peer link finite state machine * * @NL80211_PLINK_LISTEN: initial state, considered the implicit - * state of non existent mesh peer links + * state of non-existent mesh peer links * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to * this mesh peer * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received @@ -5549,7 +6074,7 @@ enum nl80211_if_combination_attrs { * @NL80211_PLINK_ESTAB: mesh peer link is established * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh - * plink are discarded + * plink are discarded, except for authentication frames * @NUM_NL80211_PLINK_STATES: number of peer link states * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states */ @@ -5575,7 +6100,7 @@ enum nl80211_plink_state { * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer * @NUM_NL80211_PLINK_ACTIONS: number of possible actions */ -enum plink_actions { +enum nl80211_plink_action { NL80211_PLINK_ACTION_NO_ACTION, NL80211_PLINK_ACTION_OPEN, NL80211_PLINK_ACTION_BLOCK, @@ -5588,6 +6113,7 @@ enum plink_actions { #define NL80211_KEK_LEN 16 #define NL80211_KCK_EXT_LEN 24 #define NL80211_KEK_EXT_LEN 32 +#define NL80211_KCK_EXT_LEN_32 32 #define NL80211_REPLAY_CTR_LEN 8 /** @@ -5686,13 +6212,15 @@ enum nl80211_tdls_operation { NL80211_TDLS_DISABLE_LINK, }; -/* +/** * enum nl80211_ap_sme_features - device-integrated AP features - * Reserved for future use, no bits are defined in - * NL80211_ATTR_DEVICE_AP_SME yet. + * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver + * when user space indicates support for SA Query procedures offload during + * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. + */ enum nl80211_ap_sme_features { + NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, }; - */ /** * enum nl80211_feature_flags - device/driver features @@ -5703,7 +6231,7 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from + * to work properly to support receiving regulatory hints from * cellular base stations. * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only * here to reserve the value for API/ABI compatibility) @@ -5829,7 +6357,7 @@ enum nl80211_feature_flags { * request to use RRM (see %NL80211_ATTR_USE_RRM) with * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set * the ASSOC_REQ_USE_RRM flag in the association request even if - * NL80211_FEATURE_QUIET is not advertized. + * NL80211_FEATURE_QUIET is not advertised. * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air * sniffer which means that it can be configured to hear packets from * certain groups which can be configured by the @@ -5841,13 +6369,15 @@ enum nl80211_feature_flags { * the BSS that the interface that requested the scan is connected to * (if available). * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the - * time the last beacon/probe was received. The time is the TSF of the - * BSS that the interface that requested the scan is connected to - * (if available). + * time the last beacon/probe was received. For a non-MLO connection, the + * time is the TSF of the BSS that the interface that requested the scan is + * connected to (if available). For an MLO connection, the time is the TSF + * of the BSS corresponding with link ID specified in the scan request (if + * specified). * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of * channel dwell time. * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate - * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate. * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate * configuration (AP/mesh) with HT rates. * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate @@ -5897,6 +6427,7 @@ enum nl80211_feature_flags { * receiving control port frames over nl80211 instead of the netdevice. * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports * (average) ACK signal strength reporting. + * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate * TXQs. * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the @@ -5921,8 +6452,7 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching * (set/del PMKSA operations) in AP mode. * - * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports - * filtering of sched scan results using band specific RSSI thresholds. + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete * * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power * to a station. @@ -5995,6 +6525,47 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision * detection and change announcemnts. * + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports + * FILS encryption and decryption for (Re)Association Request and Response + * frames. Userspace has to share FILS AAD details to the driver by using + * @NL80211_CMD_SET_FILS_AAD. + * + * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC + * detection. + * + * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address + * change without having to bring the underlying network device down + * first. For example, in station mode this can be used to vary the + * origin MAC address prior to a connection to a new AP for privacy + * or other reasons. Note that certain driver specific restrictions + * might apply, e.g. no scans in progress, no offchannel operations + * in progress, and no active connections. + * + * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode. + * + * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables + * authentication, data encryption and message integrity. + * + * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA + * in authentication and deauthentication frames sent to unassociated peer + * using @NL80211_CMD_FRAME. + * + * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE + * handling in station mode. + * + * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE + * handling in AP mode. + * + * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or + * ad hoc operation on DFS channels under the control of a concurrent + * DFS master on the same channel as described in FCC-594280 D01 + * (Section B.3). This, for example, allows P2P GO and P2P clients to + * operate on DFS channels as long as there's a concurrent BSS connection. + * + * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP + * (signaling and payload protected) A-MSDUs and this shall be advertised + * in the RSNXE. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6036,7 +6607,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AP_PMKSA_CACHING, - NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */ NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_SAE_OFFLOAD, @@ -6060,6 +6631,16 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SECURE_RTT, NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, NL80211_EXT_FEATURE_BSS_COLOR, + NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, + NL80211_EXT_FEATURE_RADAR_BACKGROUND, + NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, + NL80211_EXT_FEATURE_PUNCT, + NL80211_EXT_FEATURE_SECURE_NAN, + NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, + NL80211_EXT_FEATURE_OWE_OFFLOAD, + NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, + NL80211_EXT_FEATURE_DFS_CONCURRENT, + NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -6144,7 +6725,7 @@ enum nl80211_timeout_reason { * request parameters IE in the probe request * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at - * rate of at least 5.5M. In case non OCE AP is discovered in the channel, + * rate of at least 5.5M. In case non-OCE AP is discovered in the channel, * only the first probe req in the channel will be sent in high rate. * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request * tx deferral (dot11FILSProbeDelay shall be set to 15ms) @@ -6174,8 +6755,16 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by - * 2.4/5 GHz APs + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by + * 2.4/5 GHz APs. When the flag is set, the scan logic will use the + * information from the RNR element found in beacons/probe responses + * received on the 2.4/5 GHz channels to actively scan only the 6GHz + * channels on which APs are expected to be found. Note that when not set, + * the scan logic would scan all 6GHz channels, but since transmission of + * probe requests on non-PSC channels is limited, it is highly likely that + * these channels would passively be scanned. Also note that when the flag + * is set, in addition to the colocated APs, PSC channels would also be + * scanned if the user space has asked for it. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -6222,6 +6811,8 @@ enum nl80211_acl_policy { * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and * turn on other antennas after CTS/RTS). + * @__NL80211_SMPS_AFTER_LAST: internal + * @NL80211_SMPS_MAX: highest used enumeration */ enum nl80211_smps_mode { NL80211_SMPS_OFF, @@ -6443,6 +7034,8 @@ enum nl80211_bss_select_attr { * @NL80211_NAN_FUNC_PUBLISH: function is publish * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use + * @NL80211_NAN_FUNC_MAX_TYPE: internal use */ enum nl80211_nan_function_type { NL80211_NAN_FUNC_PUBLISH, @@ -6504,7 +7097,7 @@ enum nl80211_nan_func_term_reason { * The instance ID for the follow up Service Discovery Frame. This is u8. * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type * is follow up. This is a u8. - * The requestor instance ID for the follow up Service Discovery Frame. + * The requester instance ID for the follow up Service Discovery Frame. * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the * follow up Service Discovery Frame. This is a binary attribute. * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a @@ -6603,7 +7196,7 @@ enum nl80211_nan_match_attributes { }; /** - * nl80211_external_auth_action - Action to perform with external + * enum nl80211_external_auth_action - Action to perform with external * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * @NL80211_EXTERNAL_AUTH_START: Start the authentication. * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. @@ -6621,7 +7214,7 @@ enum nl80211_external_auth_action { * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), * i.e. starting with the measurement token - * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element + * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), * i.e. starting with the measurement token * @__NL80211_FTM_RESP_ATTR_LAST: Internal @@ -6894,7 +7487,7 @@ enum nl80211_peer_measurement_attrs { * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if * trigger based ranging measurement is supported * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating - * if non trigger based ranging measurement is supported + * if non-trigger-based ranging measurement is supported * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -6948,7 +7541,7 @@ enum nl80211_peer_measurement_ftm_capa { * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based * ranging will be used. - * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based + * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based * ranging measurement (flag) * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are * mutually exclusive. @@ -7026,7 +7619,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames * transmitted (u32, optional) * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames - * that were acknowleged (u32, optional) + * that were acknowledged (u32, optional) * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the * busy peer (u32, seconds) * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent @@ -7187,7 +7780,7 @@ enum nl80211_iftype_akm_attributes { * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). * Allowed range: 0..10000 (TU = Time Unit) * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). - * Allowed range: 0..10000 (TU = Time Unit) + * Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled. * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action * frame including the headers. * @@ -7220,7 +7813,8 @@ enum nl80211_fils_discovery_attributes { * * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 - * 26.17.2.3.2 (AP behavior for fast passive scanning). + * 26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is + * disabled. * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response * frame template (binary). * @@ -7263,6 +7857,7 @@ enum nl80211_sae_pwe_mechanism { * * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit * + * @NUM_NL80211_SAR_TYPE: internal */ enum nl80211_sar_type { NL80211_SAR_TYPE_POWER, @@ -7276,6 +7871,8 @@ enum nl80211_sar_type { /** * enum nl80211_sar_attrs - Attributes for SAR spec * + * @__NL80211_SAR_ATTR_INVALID: Invalid + * * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. * * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power @@ -7307,6 +7904,8 @@ enum nl80211_sar_attrs { /** * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs * + * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid + * * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual * power limit value in units of 0.25 dBm if type is * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). @@ -7349,4 +7948,126 @@ enum nl80211_sar_specs_attrs { NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, }; +/** + * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced + * multi-BSSID advertisements (EMA) in AP mode. + * Kernel uses some of these attributes to advertise driver's support for + * MBSSID and EMA. + * Remaining attributes should be used by the userspace to configure the + * features. + * + * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise + * the maximum number of MBSSID interfaces supported by the driver. + * Driver should indicate MBSSID support by setting + * wiphy->mbssid_max_interfaces to a value more than or equal to 2. + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel + * to advertise the maximum profile periodicity supported by the driver + * if EMA is enabled. Driver should indicate EMA support to the userspace + * by setting wiphy->ema_max_profile_periodicity to + * a non-zero value. + * + * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of + * this BSS (u8) in the multiple BSSID set. + * Value must be set to 0 for the transmitting interface and non-zero for + * all non-transmitting interfaces. The userspace will be responsible + * for using unique indices for the interfaces. + * Range: 0 to wiphy->mbssid_max_interfaces-1. + * + * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for + * a non-transmitted profile which provides the interface index (u32) of + * the transmitted profile. The value must match one of the interface + * indices advertised by the kernel. Optional if the interface being set up + * is the transmitting one, however, if provided then the value must match + * the interface index of the same. + * + * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. + * Setting this flag is permitted only if the driver advertises EMA support + * by setting wiphy->ema_max_profile_periodicity to non-zero. + * + * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal + * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute + */ +enum nl80211_mbssid_config_attributes { + __NL80211_MBSSID_CONFIG_ATTR_INVALID, + + NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, + NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, + NL80211_MBSSID_CONFIG_ATTR_INDEX, + NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, + NL80211_MBSSID_CONFIG_ATTR_EMA, + + /* keep last */ + __NL80211_MBSSID_CONFIG_ATTR_LAST, + NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, +}; + +/** + * enum nl80211_ap_settings_flags - AP settings flags + * + * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external + * authentication. + * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query + * procedures offload to driver. If driver advertises + * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall + * ignore SA Query procedures and validations when this flag is set by + * userspace. + */ +enum nl80211_ap_settings_flags { + NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, + NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, +}; + +/** + * enum nl80211_wiphy_radio_attrs - wiphy radio attributes + * + * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid + * + * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32) + * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this + * radio. Attribute may be present multiple times. + * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface + * combination for this radio. Attribute may be present multiple times + * and contains attributes defined in &enum nl80211_if_combination_attrs. + * + * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal + * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute + */ +enum nl80211_wiphy_radio_attrs { + __NL80211_WIPHY_RADIO_ATTR_INVALID, + + NL80211_WIPHY_RADIO_ATTR_INDEX, + NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE, + NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION, + + /* keep last */ + __NL80211_WIPHY_RADIO_ATTR_LAST, + NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1, +}; + +/** + * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range + * + * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid + * + * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32). + * The unit is kHz. + * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32). + * The unit is kHz. + * + * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal + * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute + */ +enum nl80211_wiphy_radio_freq_range { + __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID, + + NL80211_WIPHY_RADIO_FREQ_ATTR_START, + NL80211_WIPHY_RADIO_FREQ_ATTR_END, + + __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST, + NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */ |