| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
note that the old code inserted added headers at the beginning of the
list, reasoning unknown. this seems counter-intuitive as the headers
would end up in the request in the reverse order they were added,
but this was irrelevant, as the headers were originally first put
into the hashmap hashofheaders before sending it to the client.
since the hashmap didn't preserve ordering, the headers would appear
in random order anyway.
|
|
usage of select() is inefficient (because a huge fd_set array has to
be initialized on each call) and insecure (because an fd >= FD_SETSIZE
will cause out-of-bounds accesses using the FD_*SET macros, and a system
can be set up to allow more than that number of fds using ulimit).
for the moment we prepared a poll-like wrapper that still runs select()
to test for regressions, and so we have fallback code for systems without
poll().
|
|
this allows to access the conn member from the main thread handling
the childs, plus simplifies the code.
|
|
also fixes a bug where the ErrorFile directive would create a
new hashmap on every added item, effectively allowing only
the use of the last specified errornumber, and producing memory
leaks on each config reload.
|
|
due to the usage of a hashmap to store headers, when relaying them
to the other side the order was not prevented.
even though correct from a standards point-of-view, this caused
issues with various programs, and it allows to fingerprint the use
of tinyproxy.
to implement this, i imported the MIT-licensed hsearch.[ch] from
https://github.com/rofl0r/htab which was originally taken from
musl libc. it's a simple and efficient hashtable implementation
with far better performance characteristic than the one previously
used by tinyproxy. additionally it has an API much more well-suited
for this purpose.
orderedmap.[ch] was implemented from scratch to address this issue.
behind the scenes it uses an sblist to store string values, and a htab
to store keys and the indices into the sblist.
this allows us to iterate linearly over the sblist and then find the
corresponding key in the hash table, so the headers can be reproduced
in the order they were received.
closes #73
|
|
get_request_entity()'s purpose is to drain remaining unread bytes
in the request read pipe before handing out an error page,
and kinda surprisingly, also when connection to the stathost is
done.
in the stathost case tinyproxy just skipped proper processing and
jumped to the error handler code, and remembering whether a
connection to the stathost was desired in a variable, then doing
things a bit differently depending on whether it's set.
i tried to fix issues with get_request_entity in
88153e944f7d28f57cccc77f3228a3f54f78ce4e (which is basically the
right fix for the issue it tried to solve, but incomplete),
and resulting from there in 78cc5b72b18a3c0d196126bfbc5d3b6473386da9.
the latter fix wasn't quite right since we're not supposed to check
whether the socket is ready for writing, and having a return value
of 2 instead of 1 got resulted in some of the if statements not
kicking in when they should have.
this also resulted in the stathost page no longer working.
after in-depth study of the issue i realized that we only need to
call get_request_entity() when the headers aren't completely read,
additional to setting the proper connection timeout as
88153e944f7d28f57cccc77f3228a3f54f78ce4e already implemented.
the changes of 78cc5b72b18a3c0d196126bfbc5d3b6473386da9 have been
reverted.
|
|
|
|
this allows to see in a backtrace from where the error was
triggered.
|
|
this allows us in a next step to replace goto fail with a call to that
function, so we can see in a backtrace from where the failure was
triggered.
|
|
in networking, hitting a timeout requires that *nothing* happens during the
interval. whenever anything happens, the timeout is reset.
there's no need to do custom time calculations, it's perfectly fine to let
the kernel handle it using the select() syscall.
additionally the code added in 0b9a74c29036f9215b2b97a301b7b25933054302
assures that read and write syscalls() don't block indefinitely and return
on the timeout too, so there's no need to switch sockets back and forth
between blocking/nonblocking.
|
|
|
|
introduced in 88153e944f7d28f57cccc77f3228a3f54f78ce4e.
when connect method is used (HTTPS), and e.g. a filtered domain requested,
there's no data on readfds, only on writefds.
this caused the response from the connection to hang until the timeout was
hit. in the past in such scenario always a "no entity" response
was produced in tinyproxy logs.
|
|
get_request_entity() is only called on error, for example if a client
doesn't pass a check_acl() check. in such a case it's possible that
the client fd isn't yet ready to read from.
using select() with a timeout timeval of {0,0} causes it to return
immediately and return 0 if there's no data ready to be read.
this resulted in immediate connection termination rather than returning
the 403 access denied error page to the client and a confusing
"no entity" message displayed in the proxy log.
|
|
|
|
* check return values of memory allocation and abort gracefully
in out-of-memory situations
* use sblist (linear dynamic array) instead of linked list
- this removes one pointer per filter rule
- removes need to manually allocate/free every single list item
(instead block allocation is used)
- simplifies code
* remove storage of (unused) input rule
- removes one char* pointer per filter rule
- removes storage of the raw bytes of each filter rule
* add line number to display on out-of-memory/invalid regex situation
* replace duplicate filter_domain()/filter_host() code with a single
function filter_run()
- reduces code size and management effort
with these improvements, >1 million regex rules can be loaded with
4 GB of RAM, whereas previously it crashed with about 950K.
the list for testing was assembled from
http://www.shallalist.de/Downloads/shallalist.tar.gz
closes #20
|
|
the timeout option set by the config file wasn't respected at all
so it could happen that connections became stale and were never released,
which eventually caused tinyproxy to hit the limit of open connections and
never accepting new ones.
addresses #274
|
|
unlike other functions called from the config parser code,
anonymous_insert() accesses the global config variable rather than
passing it as an argument. however the global variable is only set
after successful loading of the entire config.
we fix this by adding a conf argument to each anonymous_* function,
passing the global pointer in calls done from outside the config
parser.
fixes #292
|
|
this is required so we can elegantly swap out an old config for a
new one in the future and remove lots of boilerplate from config
initialization code.
unfortunately this is a quite intrusive change as the config struct
was accessed in numerous places, but frankly it should have been
done via a pointer right from the start.
right now, we simply point to a static struct in main.c, so there
shouldn't be any noticeable changes in behaviour.
|
|
it is quite easy to bring down a proxy server by forcing it to make
connections to one of its own ports, because this will result in an endless
loop spawning more and more connections, until all available fds are exhausted.
since there's a potentially infinite number of potential DNS/ip addresses
resolving to the proxy, it is impossible to detect an endless loop by simply
looking at the destination ip address and port.
what *is* possible though is to record the ip/port tuples assigned to outgoing
connections, and then compare them against new incoming connections. if they
match, the sender was the proxy itself and therefore needs to reject that
connection.
fixes #199.
|
|
tinyproxy used to do a full hostname resolution whenever a new client
connection happened, which could cause very long delays (as reported in #198).
there's only a single place/scenario that actually requires a hostname, and
that is when an Allow/Deny rule exists for a hostname or domain, rather than
a raw IP address. since it is very likely this feature is not very widely used,
it makes absolute sense to only do the costly resolution when it is unavoidable.
|
|
http protocol requires different treatment of proxy auth vs server auth.
fixes #246
|
|
RFC 1929 specifies that the user/pass auth subnegotation repurposes the version
field for the version of that specification, which is 1, not 5.
however there's quite a good deal of software out there which got it wrong and
replies with version 5 to a successful authentication, so let's just accept both
forms - other socks5 client programs like curl do the same.
closes #172
|
|
just like the rest of the socks code, this was stolen from
proxychains-ng, of which i'm happen to be the maintainer of,
so it's not an issue (the licenses are identical, too).
|
|
and add a NONE member.
|
|
loosely based on @valenbg1's code from PR #38
closes #38
closes #96
|
|
as reported by @natedogith1
|
|
using the "BasicAuth" keyword in tinyproxy.conf.
base64 code was written by myself and taken from my own library "libulz".
for this purpose it is relicensed under the usual terms of the tinyproxy
license.
|
|
the line
len = buff[0]; /* max = 255 */
could lead to a negative length if the value in buff[0] is > 127.
|
|
original patch submitted in 2006 to debian mailing list:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=392848%29#12
this version was rebased to git and updated by Russ Dill <russ.dill@gmail.com>
in 2015 (the original patch used a different config file format).
as discussed in #40.
commit message by @rofl0r.
|
|
available (#35)
allow non-reverse mappings if reverseonly is not enabled
|
|
This should make hash processing generally faster.
There is a treadeoff between memory footprint and
speed of processing. 10 KB instead of 1.2 KB of
hash table per process should not be a huge problem
even on very limited current systems.
Who really needs to stick to 32 buckets could
recompile. We could also think about making
this configurable at some point.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Based on patch provided by gpernot@praksys.org on bugzilla.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Check the return value of socket_blocking (fcntl) at the
end of relay_connection() for client socket.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Check the return value of socket_blocking (fcntl) at the
end of relay_connection().
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
url == NULL is caught above.
Found by coverity.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Check the return code of fcntl via socket_blocking
in pull_client_data().
Found by coverity.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Check the return code of fcntl via socket_nonblocking
in pull_client_data()
Found by coverity.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
ret will be used in enclosing scope.
so rename this special varibale.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Effectively, the return code of fcntl was not checked
by not checking the return code of socket_nonblocking()
for the server fd.
Found by coverity.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Effectively, the return code of fcntl was not checked
by not checking the return code of socket_nonblocking()
for the client fd.
Found by coverity.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
Use extract_url instead of the old extract_ssl_url:
extract_url is generic and handles ipv6 literal addresses correctly.
Signed-off-by: Michael Adam <obnox@samba.org>
|
|
extract_url
There is in fact nothing http-specific any more about this function, hence
the rename. The input has been stripped of the <proto>:// header anyways.
This in preparation of fixing bug BB#106: ssl fails with literal ipv6 addrs.
Signed-off-by: Michael Adam <obnox@samba.org>
|
