summaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--README.rst14
-rw-r--r--paramiko/dsskey.py123
-rw-r--r--paramiko/ecdsakey.py113
-rw-r--r--paramiko/packet.py6
-rw-r--r--paramiko/pkey.py72
-rw-r--r--paramiko/rsakey.py158
-rw-r--r--paramiko/ssh_gss.py18
-rw-r--r--paramiko/transport.py82
-rw-r--r--paramiko/util.py34
-rw-r--r--setup.py6
-rw-r--r--sites/www/index.rst5
-rw-r--r--sites/www/installing-1.x.rst94
-rw-r--r--sites/www/installing.rst110
-rw-r--r--tests/test_auth.py12
-rw-r--r--tests/test_client.py26
-rw-r--r--tests/test_packetizer.py29
-rw-r--r--tests/test_pkey.py48
-rw-r--r--tox-requirements.txt3
-rw-r--r--tox.ini2
19 files changed, 542 insertions, 413 deletions
diff --git a/README.rst b/README.rst
index 8e8c6186..3ed9e7bc 100644
--- a/README.rst
+++ b/README.rst
@@ -42,10 +42,9 @@ that should have come with this archive.
Requirements
------------
-- `Python <http://www.python.org/>`_ 2.6, 2.7, or 3.3+ (3.2 should also work,
- but it is not recommended)
-- `pycrypto <https://www.dlitz.net/software/pycrypto/>`_ 2.1+
-- `ecdsa <https://pypi.python.org/pypi/ecdsa>`_ 0.11+
+- `Python <http://www.python.org/>`_ 2.6, 2.7, or 3.3+
+- `Cryptography <https://cryptography.io>`_ 0.8 or better
+- `pyasn1 <https://pypi.python.org/pypi/pyasn1>`_ 0.1.7 or better
Installation
@@ -66,13 +65,6 @@ Paramiko primarily supports POSIX platforms with standard OpenSSH
implementations, and is most frequently tested on Linux and OS X. Windows is
supported as well, though it may not be as straightforward.
-Some Windows users whose Python is 64-bit have found that the PyCrypto
-dependency ``winrandom`` may not install properly, leading to an
-``ImportError``. In this scenario, you may need to compile ``winrandom``
-yourself. See `Fabric #194 <https://github.com/fabric/fabric/issues/194>`_
-for info.
-
-
Bugs & Support
--------------
diff --git a/paramiko/dsskey.py b/paramiko/dsskey.py
index d7dd6275..7e14422c 100644
--- a/paramiko/dsskey.py
+++ b/paramiko/dsskey.py
@@ -20,21 +20,23 @@
DSS keys.
"""
-import os
-from hashlib import sha1
-
-from Crypto.PublicKey import DSA
+from cryptography.exceptions import InvalidSignature
+from cryptography.hazmat.backends import default_backend
+from cryptography.hazmat.primitives import hashes, serialization
+from cryptography.hazmat.primitives.asymmetric import dsa
+from cryptography.hazmat.primitives.asymmetric.utils import (
+ decode_rfc6979_signature, encode_rfc6979_signature
+)
from paramiko import util
from paramiko.common import zero_byte
-from paramiko.py3compat import long
from paramiko.ssh_exception import SSHException
from paramiko.message import Message
from paramiko.ber import BER, BERException
from paramiko.pkey import PKey
-class DSSKey (PKey):
+class DSSKey(PKey):
"""
Representation of a DSS key which can be used to sign an verify SSH2
data.
@@ -98,15 +100,21 @@ class DSSKey (PKey):
return self.x is not None
def sign_ssh_data(self, data):
- digest = sha1(data).digest()
- dss = DSA.construct((long(self.y), long(self.g), long(self.p), long(self.q), long(self.x)))
- # generate a suitable k
- qsize = len(util.deflate_long(self.q, 0))
- while True:
- k = util.inflate_long(os.urandom(qsize), 1)
- if (k > 2) and (k < self.q):
- break
- r, s = dss.sign(util.inflate_long(digest, 1), k)
+ key = dsa.DSAPrivateNumbers(
+ x=self.x,
+ public_numbers=dsa.DSAPublicNumbers(
+ y=self.y,
+ parameter_numbers=dsa.DSAParameterNumbers(
+ p=self.p,
+ q=self.q,
+ g=self.g
+ )
+ )
+ ).private_key(backend=default_backend())
+ signer = key.signer(hashes.SHA1())
+ signer.update(data)
+ r, s = decode_rfc6979_signature(signer.finalize())
+
m = Message()
m.add_string('ssh-dss')
# apparently, in rare cases, r or s may be shorter than 20 bytes!
@@ -132,27 +140,65 @@ class DSSKey (PKey):
# pull out (r, s) which are NOT encoded as mpints
sigR = util.inflate_long(sig[:20], 1)
sigS = util.inflate_long(sig[20:], 1)
- sigM = util.inflate_long(sha1(data).digest(), 1)
- dss = DSA.construct((long(self.y), long(self.g), long(self.p), long(self.q)))
- return dss.verify(sigM, (sigR, sigS))
-
- def _encode_key(self):
- if self.x is None:
- raise SSHException('Not enough key information')
- keylist = [0, self.p, self.q, self.g, self.y, self.x]
+ signature = encode_rfc6979_signature(sigR, sigS)
+
+ key = dsa.DSAPublicNumbers(
+ y=self.y,
+ parameter_numbers=dsa.DSAParameterNumbers(
+ p=self.p,
+ q=self.q,
+ g=self.g
+ )
+ ).public_key(backend=default_backend())
+ verifier = key.verifier(signature, hashes.SHA1())
+ verifier.update(data)
try:
- b = BER()
- b.encode(keylist)
- except BERException:
- raise SSHException('Unable to create ber encoding of key')
- return b.asbytes()
+ verifier.verify()
+ except InvalidSignature:
+ return False
+ else:
+ return True
def write_private_key_file(self, filename, password=None):
- self._write_private_key_file('DSA', filename, self._encode_key(), password)
+ key = dsa.DSAPrivateNumbers(
+ x=self.x,
+ public_numbers=dsa.DSAPublicNumbers(
+ y=self.y,
+ parameter_numbers=dsa.DSAParameterNumbers(
+ p=self.p,
+ q=self.q,
+ g=self.g
+ )
+ )
+ ).private_key(backend=default_backend())
+
+ self._write_private_key_file(
+ filename,
+ key,
+ serialization.PrivateFormat.TraditionalOpenSSL,
+ password=password
+ )
def write_private_key(self, file_obj, password=None):
- self._write_private_key('DSA', file_obj, self._encode_key(), password)
+ key = dsa.DSAPrivateNumbers(
+ x=self.x,
+ public_numbers=dsa.DSAPublicNumbers(
+ y=self.y,
+ parameter_numbers=dsa.DSAParameterNumbers(
+ p=self.p,
+ q=self.q,
+ g=self.g
+ )
+ )
+ ).private_key(backend=default_backend())
+
+ self._write_private_key(
+ file_obj,
+ key,
+ serialization.PrivateFormat.TraditionalOpenSSL,
+ password=password
+ )
@staticmethod
def generate(bits=1024, progress_func=None):
@@ -161,14 +207,19 @@ class DSSKey (PKey):
generate a new host key or authentication key.
:param int bits: number of bits the generated key should be.
- :param function progress_func:
- an optional function to call at key points in key generation (used
- by ``pyCrypto.PublicKey``).
+ :param function progress_func: Unused
:return: new `.DSSKey` private key
"""
- dsa = DSA.generate(bits, os.urandom, progress_func)
- key = DSSKey(vals=(dsa.p, dsa.q, dsa.g, dsa.y))
- key.x = dsa.x
+ numbers = dsa.generate_private_key(
+ bits, backend=default_backend()
+ ).private_numbers()
+ key = DSSKey(vals=(
+ numbers.public_numbers.parameter_numbers.p,
+ numbers.public_numbers.parameter_numbers.q,
+ numbers.public_numbers.parameter_numbers.g,
+ numbers.public_numbers.y
+ ))
+ key.x = numbers.x
return key
### internals...
diff --git a/paramiko/ecdsakey.py b/paramiko/ecdsakey.py
index 8827a1db..c69bef73 100644
--- a/paramiko/ecdsakey.py
+++ b/paramiko/ecdsakey.py
@@ -21,18 +21,23 @@ ECDSA keys
"""
import binascii
-from hashlib import sha256
-from ecdsa import SigningKey, VerifyingKey, der, curves
+from cryptography.exceptions import InvalidSignature
+from cryptography.hazmat.backends import default_backend
+from cryptography.hazmat.primitives import hashes, serialization
+from cryptography.hazmat.primitives.asymmetric import ec
+from cryptography.hazmat.primitives.asymmetric.utils import (
+ decode_rfc6979_signature, encode_rfc6979_signature
+)
-from paramiko.common import four_byte, one_byte
+from paramiko.common import four_byte
from paramiko.message import Message
from paramiko.pkey import PKey
-from paramiko.py3compat import byte_chr, u
from paramiko.ssh_exception import SSHException
+from paramiko.util import deflate_long, inflate_long
-class ECDSAKey (PKey):
+class ECDSAKey(PKey):
"""
Representation of an ECDSA key which can be used to sign and verify SSH2
data.
@@ -65,9 +70,13 @@ class ECDSAKey (PKey):
if pointinfo[0:1] != four_byte:
raise SSHException('Point compression is being used: %s' %
binascii.hexlify(pointinfo))
- self.verifying_key = VerifyingKey.from_string(pointinfo[1:],
- curve=curves.NIST256p,
- validate_point=validate_point)
+ curve = ec.SECP256R1()
+ numbers = ec.EllipticCurvePublicNumbers(
+ x=inflate_long(pointinfo[1:1 + curve.key_size // 8], always_positive=True),
+ y=inflate_long(pointinfo[1 + curve.key_size // 8:], always_positive=True),
+ curve=curve
+ )
+ self.verifying_key = numbers.public_key(backend=default_backend())
self.size = 256
def asbytes(self):
@@ -76,8 +85,15 @@ class ECDSAKey (PKey):
m.add_string('ecdsa-sha2-nistp256')
m.add_string('nistp256')
- point_str = four_byte + key.to_string()
+ numbers = key.public_numbers()
+ x_bytes = deflate_long(numbers.x, add_sign_padding=False)
+ x_bytes = b'\x00' * (len(x_bytes) - key.curve.key_size // 8) + x_bytes
+
+ y_bytes = deflate_long(numbers.y, add_sign_padding=False)
+ y_bytes = b'\x00' * (len(y_bytes) - key.curve.key_size // 8) + y_bytes
+
+ point_str = four_byte + x_bytes + y_bytes
m.add_string(point_str)
return m.asbytes()
@@ -86,8 +102,8 @@ class ECDSAKey (PKey):
def __hash__(self):
h = hash(self.get_name())
- h = h * 37 + hash(self.verifying_key.pubkey.point.x())
- h = h * 37 + hash(self.verifying_key.pubkey.point.y())
+ h = h * 37 + hash(self.verifying_key.public_numbers().x)
+ h = h * 37 + hash(self.verifying_key.public_numbers().y)
return hash(h)
def get_name(self):
@@ -100,34 +116,52 @@ class ECDSAKey (PKey):
return self.signing_key is not None
def sign_ssh_data(self, data):
- sig = self.signing_key.sign_deterministic(
- data, sigencode=self._sigencode, hashfunc=sha256)
+ signer = self.signing_key.signer(ec.ECDSA(hashes.SHA256()))
+ signer.update(data)
+ sig = signer.finalize()
+ r, s = decode_rfc6979_signature(sig)
+
m = Message()
m.add_string('ecdsa-sha2-nistp256')
- m.add_string(sig)
+ m.add_string(self._sigencode(r, s))
return m
def verify_ssh_sig(self, data, msg):
if msg.get_text() != 'ecdsa-sha2-nistp256':
return False
sig = msg.get_binary()
-
- # verify the signature by SHA'ing the data and encrypting it
- # using the public key.
- hash_obj = sha256(data).digest()
- return self.verifying_key.verify_digest(sig, hash_obj,
- sigdecode=self._sigdecode)
+ sigR, sigS = self._sigdecode(sig)
+ signature = encode_rfc6979_signature(sigR, sigS)
+
+ verifier = self.verifying_key.verifier(
+ signature, ec.ECDSA(hashes.SHA256())
+ )
+ verifier.update(data)
+ try:
+ verifier.verify()
+ except InvalidSignature:
+ return False
+ else:
+ return True
def write_private_key_file(self, filename, password=None):
- key = self.signing_key or self.verifying_key
- self._write_private_key_file('EC', filename, key.to_der(), password)
+ self._write_private_key_file(
+ filename,
+ self.signing_key,
+ serialization.PrivateFormat.TraditionalOpenSSL,
+ password=password
+ )
def write_private_key(self, file_obj, password=None):
- key = self.signing_key or self.verifying_key
- self._write_private_key('EC', file_obj, key.to_der(), password)
+ self._write_private_key(
+ file_obj,
+ self.signing_key,
+ serialization.PrivateFormat.TraditionalOpenSSL,
+ password=password
+ )
@staticmethod
- def generate(curve=curves.NIST256p, progress_func=None):
+ def generate(curve=ec.SECP256R1(), progress_func=None):
"""
Generate a new private ECDSA key. This factory function can be used to
generate a new host key or authentication key.
@@ -135,9 +169,8 @@ class ECDSAKey (PKey):
:param function progress_func: Not used for this type of key.
:returns: A new private key (`.ECDSAKey`) object
"""
- signing_key = SigningKey.generate(curve)
- key = ECDSAKey(vals=(signing_key, signing_key.get_verifying_key()))
- return key
+ private_key = ec.generate_private_key(curve, backend=default_backend())
+ return ECDSAKey(vals=(private_key, private_key.public_key()))
### internals...
@@ -149,27 +182,25 @@ class ECDSAKey (PKey):
data = self._read_private_key('EC', file_obj, password)
self._decode_key(data)
- ALLOWED_PADDINGS = [one_byte, byte_chr(2) * 2, byte_chr(3) * 3, byte_chr(4) * 4,
- byte_chr(5) * 5, byte_chr(6) * 6, byte_chr(7) * 7]
-
def _decode_key(self, data):
- s, padding = der.remove_sequence(data)
- if padding:
- if padding not in self.ALLOWED_PADDINGS:
- raise ValueError("weird padding: %s" % u(binascii.hexlify(data)))
- data = data[:-len(padding)]
- key = SigningKey.from_der(data)
+ try:
+ key = serialization.load_der_private_key(
+ data, password=None, backend=default_backend()
+ )
+ except ValueError as e:
+ raise SSHException(str(e))
+
self.signing_key = key
- self.verifying_key = key.get_verifying_key()
- self.size = 256
+ self.verifying_key = key.public_key()
+ self.size = key.curve.key_size
- def _sigencode(self, r, s, order):
+ def _sigencode(self, r, s):
msg = Message()
msg.add_mpint(r)
msg.add_mpint(s)
return msg.asbytes()
- def _sigdecode(self, sig, order):
+ def _sigdecode(self, sig):
msg = Message(sig)
r = msg.get_mpint()
s = msg.get_mpint()
diff --git a/paramiko/packet.py b/paramiko/packet.py
index 89a514d1..00cf5657 100644
--- a/paramiko/packet.py
+++ b/paramiko/packet.py
@@ -353,7 +353,7 @@ class Packetizer (object):
self._log(DEBUG, 'Write packet <%s>, length %d' % (cmd_name, orig_len))
self._log(DEBUG, util.format_binary(packet, 'OUT: '))
if self.__block_engine_out is not None:
- out = self.__block_engine_out.encrypt(packet)
+ out = self.__block_engine_out.update(packet)
else:
out = packet
# + mac
@@ -386,7 +386,7 @@ class Packetizer (object):
"""
header = self.read_all(self.__block_size_in, check_rekey=True)
if self.__block_engine_in is not None:
- header = self.__block_engine_in.decrypt(header)
+ header = self.__block_engine_in.update(header)
if self.__dump_packets:
self._log(DEBUG, util.format_binary(header, 'IN: '))
packet_size = struct.unpack('>I', header[:4])[0]
@@ -399,7 +399,7 @@ class Packetizer (object):
packet = buf[:packet_size - len(leftover)]
post_packet = buf[packet_size - len(leftover):]
if self.__block_engine_in is not None:
- packet = self.__block_engine_in.decrypt(packet)
+ packet = self.__block_engine_in.update(packet)
if self.__dump_packets:
self._log(DEBUG, util.format_binary(packet, 'IN: '))
packet = leftover + packet
diff --git a/paramiko/pkey.py b/paramiko/pkey.py
index e95d60ba..0637a6f0 100644
--- a/paramiko/pkey.py
+++ b/paramiko/pkey.py
@@ -21,27 +21,39 @@ Common API for all public keys.
"""
import base64
-from binascii import hexlify, unhexlify
+from binascii import unhexlify
import os
from hashlib import md5
-from Crypto.Cipher import DES3, AES
+from cryptography.hazmat.backends import default_backend
+from cryptography.hazmat.primitives import serialization
+from cryptography.hazmat.primitives.ciphers import algorithms, modes, Cipher
from paramiko import util
-from paramiko.common import o600, zero_byte
+from paramiko.common import o600
from paramiko.py3compat import u, encodebytes, decodebytes, b
from paramiko.ssh_exception import SSHException, PasswordRequiredException
-class PKey (object):
+class PKey(object):
"""
Base class for public keys.
"""
# known encryption types for private key files:
_CIPHER_TABLE = {
- 'AES-128-CBC': {'cipher': AES, 'keysize': 16, 'blocksize': 16, 'mode': AES.MODE_CBC},
- 'DES-EDE3-CBC': {'cipher': DES3, 'keysize': 24, 'blocksize': 8, 'mode': DES3.MODE_CBC},
+ 'AES-128-CBC': {
+ 'cipher': algorithms.AES,
+ 'keysize': 16,
+ 'blocksize': 16,
+ 'mode': modes.CBC
+ },
+ 'DES-EDE3-CBC': {
+ 'cipher': algorithms.TripleDES,
+ 'keysize': 24,
+ 'blocksize': 8,
+ 'mode': modes.CBC
+ },
}
def __init__(self, msg=None, data=None):
@@ -301,9 +313,12 @@ class PKey (object):
mode = self._CIPHER_TABLE[encryption_type]['mode']
salt = unhexlify(b(saltstr))
key = util.generate_key_bytes(md5, salt, password, keysize)
- return cipher.new(key, mode, salt).decrypt(data)
+ decryptor = Cipher(
+ cipher(key), mode(salt), backend=default_backend()
+ ).decryptor()
+ return decryptor.update(data) + decryptor.finalize()
- def _write_private_key_file(self, tag, filename, data, password=None):
+ def _write_private_key_file(self, filename, key, format, password=None):
"""
Write an SSH2-format private key file in a form that can be read by
paramiko or openssh. If no password is given, the key is written in
@@ -321,31 +336,16 @@ class PKey (object):
with open(filename, 'w', o600) as f:
# grrr... the mode doesn't always take hold
os.chmod(filename, o600)
- self._write_private_key(tag, f, data, password)
-
- def _write_private_key(self, tag, f, data, password=None):
- f.write('-----BEGIN %s PRIVATE KEY-----\n' % tag)
- if password is not None:
- cipher_name = list(self._CIPHER_TABLE.keys())[0]
- cipher = self._CIPHER_TABLE[cipher_name]['cipher']
- keysize = self._CIPHER_TABLE[cipher_name]['keysize']
- blocksize = self._CIPHER_TABLE[cipher_name]['blocksize']
- mode = self._CIPHER_TABLE[cipher_name]['mode']
- salt = os.urandom(blocksize)
- key = util.generate_key_bytes(md5, salt, password, keysize)
- if len(data) % blocksize != 0:
- n = blocksize - len(data) % blocksize
- #data += os.urandom(n)
- # that would make more sense ^, but it confuses openssh.
- data += zero_byte * n
- data = cipher.new(key, mode, salt).encrypt(data)
- f.write('Proc-Type: 4,ENCRYPTED\n')
- f.write('DEK-Info: %s,%s\n' % (cipher_name, u(hexlify(salt)).upper()))
- f.write('\n')
- s = u(encodebytes(data))
- # re-wrap to 64-char lines
- s = ''.join(s.split('\n'))
- s = '\n'.join([s[i: i + 64] for i in range(0, len(s), 64)])
- f.write(s)
- f.write('\n')
- f.write('-----END %s PRIVATE KEY-----\n' % tag)
+ self._write_private_key(f, key, format)
+
+ def _write_private_key(self, f, key, format, password=None):
+ if password is None:
+ encryption = serialization.NoEncryption()
+ else:
+ encryption = serialization.BestEncryption(password)
+
+ f.write(key.private_bytes(
+ serialization.Encoding.PEM,
+ format,
+ encryption
+ ).decode())
diff --git a/paramiko/rsakey.py b/paramiko/rsakey.py
index 4ebd8354..bc9053f5 100644
--- a/paramiko/rsakey.py
+++ b/paramiko/rsakey.py
@@ -20,34 +20,24 @@
RSA keys.
"""
-import os
-from hashlib import sha1
+from cryptography.exceptions import InvalidSignature
+from cryptography.hazmat.backends import default_backend
+from cryptography.hazmat.primitives import hashes, serialization
+from cryptography.hazmat.primitives.asymmetric import rsa, padding
-from Crypto.PublicKey import RSA
-
-from paramiko import util
-from paramiko.common import max_byte, zero_byte, one_byte
from paramiko.message import Message
-from paramiko.ber import BER, BERException
from paramiko.pkey import PKey
-from paramiko.py3compat import long
from paramiko.ssh_exception import SSHException
-SHA1_DIGESTINFO = b'\x30\x21\x30\x09\x06\x05\x2b\x0e\x03\x02\x1a\x05\x00\x04\x14'
-
-class RSAKey (PKey):
+class RSAKey(PKey):
"""
Representation of an RSA key which can be used to sign and verify SSH2
data.
"""
- def __init__(self, msg=None, data=None, filename=None, password=None, vals=None, file_obj=None):
- self.n = None
- self.e = None
- self.d = None
- self.p = None
- self.q = None
+ def __init__(self, msg=None, data=None, filename=None, password=None, key=None, file_obj=None):
+ self.key = None
if file_obj is not None:
self._from_private_key(file_obj, password)
return
@@ -56,22 +46,33 @@ class RSAKey (PKey):
return
if (msg is None) and (data is not None):
msg = Message(data)
- if vals is not None:
- self.e, self.n = vals
+ if key is not None:
+ self.key = key
else:
if msg is None:
raise SSHException('Key object may not be empty')
if msg.get_text() != 'ssh-rsa':
raise SSHException('Invalid key')
- self.e = msg.get_mpint()
- self.n = msg.get_mpint()
- self.size = util.bit_length(self.n)
+ self.key = rsa.RSAPublicNumbers(
+ e=msg.get_mpint(), n=msg.get_mpint()
+ ).public_key(default_backend())
+
+ @property
+ def size(self):
+ return self.key.key_size
+
+ @property
+ def public_numbers(self):
+ if isinstance(self.key, rsa.RSAPrivateKey):
+ return self.key.private_numbers().public_numbers
+ else:
+ return self.key.public_numbers()
def asbytes(self):
m = Message()
m.add_string('ssh-rsa')
- m.add_mpint(self.e)
- m.add_mpint(self.n)
+ m.add_mpint(self.public_numbers.e)
+ m.add_mpint(self.public_numbers.n)
return m.asbytes()
def __str__(self):
@@ -79,8 +80,8 @@ class RSAKey (PKey):
def __hash__(self):
h = hash(self.get_name())
- h = h * 37 + hash(self.e)
- h = h * 37 + hash(self.n)
+ h = h * 37 + hash(self.public_numbers.e)
+ h = h * 37 + hash(self.public_numbers.n)
return hash(h)
def get_name(self):
@@ -90,12 +91,16 @@ class RSAKey (PKey):
return self.size
def can_sign(self):
- return self.d is not None
+ return isinstance(self.key, rsa.RSAPrivateKey)
def sign_ssh_data(self, data):
- digest = sha1(data).digest()
- rsa = RSA.construct((long(self.n), long(self.e), long(self.d)))
- sig = util.deflate_long(rsa.sign(self._pkcs1imify(digest), bytes())[0], 0)
+ signer = self.key.signer(
+ padding=padding.PKCS1v15(),
+ algorithm=hashes.SHA1(),
+ )
+ signer.update(data)
+ sig = signer.finalize()
+
m = Message()
m.add_string('ssh-rsa')
m.add_string(sig)
@@ -104,32 +109,38 @@ class RSAKey (PKey):
def verify_ssh_sig(self, data, msg):
if msg.get_text() != 'ssh-rsa':
return False
- sig = util.inflate_long(msg.get_binary(), True)
- # verify the signature by SHA'ing the data and encrypting it using the
- # public key. some wackiness ensues where we "pkcs1imify" the 20-byte
- # hash into a string as long as the RSA key.
- hash_obj = util.inflate_long(self._pkcs1imify(sha1(data).digest()), True)
- rsa = RSA.construct((long(self.n), long(self.e)))
- return rsa.verify(hash_obj, (sig,))
-
- def _encode_key(self):
- if (self.p is None) or (self.q is None):
- raise SSHException('Not enough key info to write private key file')
- keylist = [0, self.n, self.e, self.d, self.p, self.q,
- self.d % (self.p - 1), self.d % (self.q - 1),
- util.mod_inverse(self.q, self.p)]
+ key = self.key
+ if isinstance(key, rsa.RSAPrivateKey):
+ key = key.public_key()
+
+ verifier = key.verifier(
+ signature=msg.get_binary(),
+ padding=padding.PKCS1v15(),
+ algorithm=hashes.SHA1(),
+ )
+ verifier.update(data)
try:
- b = BER()
- b.encode(keylist)
- except BERException:
- raise SSHException('Unable to create ber encoding of key')
- return b.asbytes()
+ verifier.verify()
+ except InvalidSignature:
+ return False
+ else:
+ return True
def write_private_key_file(self, filename, password=None):
- self._write_private_key_file('RSA', filename, self._encode_key(), password)
+ self._write_private_key_file(
+ filename,
+ self.key,
+ serialization.PrivateFormat.TraditionalOpenSSL,
+ password=password
+ )
def write_private_key(self, file_obj, password=None):
- self._write_private_key('RSA', file_obj, self._encode_key(), password)
+ self._write_private_key(
+ file_obj,
+ self.key,
+ serialization.PrivateFormat.TraditionalOpenSSL,
+ password=password
+ )
@staticmethod
def generate(bits, progress_func=None):
@@ -138,29 +149,16 @@ class RSAKey (PKey):
generate a new host key or authentication key.
:param int bits: number of bits the generated key should be.
- :param function progress_func:
- an optional function to call at key points in key generation (used
- by ``pyCrypto.PublicKey``).
+ :param function progress_func: Unused
:return: new `.RSAKey` private key
"""
- rsa = RSA.generate(bits, os.urandom, progress_func)
- key = RSAKey(vals=(rsa.e, rsa.n))
- key.d = rsa.d
- key.p = rsa.p
- key.q = rsa.q
- return key
+ key = rsa.generate_private_key(
+ public_exponent=65537, key_size=bits, backend=default_backend()
+ )
+ return RSAKey(key=key)
### internals...
- def _pkcs1imify(self, data):
- """
- turn a 20-byte SHA1 hash into a blob of data as large as the key's N,
- using PKCS1's \"emsa-pkcs1-v1_5\" encoding. totally bizarre.
- """
- size = len(util.deflate_long(self.n, 0))
- filler = max_byte * (size - len(SHA1_DIGESTINFO) - len(data) - 3)
- return zero_byte + one_byte + filler + zero_byte + SHA1_DIGESTINFO + data
-
def _from_private_key_file(self, filename, password):
data = self._read_private_key_file('RSA', filename, password)
self._decode_key(data)
@@ -170,18 +168,12 @@ class RSAKey (PKey):
self._decode_key(data)
def _decode_key(self, data):
- # private key file contains:
- # RSAPrivateKey = { version = 0, n, e, d, p, q, d mod p-1, d mod q-1, q**-1 mod p }
try:
- keylist = BER(data).decode()
- except BERException:
- raise SSHException('Unable to parse key file')
- if (type(keylist) is not list) or (len(keylist) < 4) or (keylist[0] != 0):
- raise SSHException('Not a valid RSA private key file (bad ber encoding)')
- self.n = keylist[1]
- self.e = keylist[2]
- self.d = keylist[3]
- # not really needed
- self.p = keylist[4]
- self.q = keylist[5]
- self.size = util.bit_length(self.n)
+ key = serialization.load_der_private_key(
+ data, password=None, backend=default_backend()
+ )
+ except ValueError as e:
+ raise SSHException(str(e))
+
+ assert isinstance(key, rsa.RSAPrivateKey)
+ self.key = key
diff --git a/paramiko/ssh_gss.py b/paramiko/ssh_gss.py
index e9b13a66..e906a851 100644
--- a/paramiko/ssh_gss.py
+++ b/paramiko/ssh_gss.py
@@ -39,22 +39,8 @@ import sys
"""
GSS_AUTH_AVAILABLE = True
-try:
- from pyasn1.type.univ import ObjectIdentifier
- from pyasn1.codec.der import encoder, decoder
-except ImportError:
- GSS_AUTH_AVAILABLE = False
- class ObjectIdentifier(object):
- def __init__(self, *args):
- raise NotImplementedError("Module pyasn1 not importable")
-
- class decoder(object):
- def decode(self):
- raise NotImplementedError("Module pyasn1 not importable")
-
- class encoder(object):
- def encode(self):
- raise NotImplementedError("Module pyasn1 not importable")
+from pyasn1.type.univ import ObjectIdentifier
+from pyasn1.codec.der import encoder, decoder
from paramiko.common import MSG_USERAUTH_REQUEST
from paramiko.ssh_exception import SSHException
diff --git a/paramiko/transport.py b/paramiko/transport.py
index 18fb103b..6d0c627a 100644
--- a/paramiko/transport.py
+++ b/paramiko/transport.py
@@ -29,6 +29,9 @@ import time
import weakref
from hashlib import md5, sha1, sha256, sha512
+from cryptography.hazmat.backends import default_backend
+from cryptography.hazmat.primitives.ciphers import algorithms, Cipher, modes
+
import paramiko
from paramiko import util
from paramiko.auth_handler import AuthHandler
@@ -64,11 +67,6 @@ from paramiko.ssh_exception import (SSHException, BadAuthenticationType,
ChannelException, ProxyCommandFailure)
from paramiko.util import retry_on_signal, ClosingContextManager, clamp_value
-from Crypto.Cipher import Blowfish, AES, DES3, ARC4
-try:
- from Crypto.Util import Counter
-except ImportError:
- from paramiko.util import Counter
# for thread cleanup
@@ -92,6 +90,9 @@ class Transport (threading.Thread, ClosingContextManager):
Instances of this class may be used as context managers.
"""
+ _ENCRYPT = object()
+ _DECRYPT = object()
+
_PROTO_ID = '2.0'
_CLIENT_ID = 'paramiko_%s' % paramiko.__version__
@@ -132,67 +133,68 @@ class Transport (threading.Thread, ClosingContextManager):
_cipher_info = {
'aes128-ctr': {
- 'class': AES,
- 'mode': AES.MODE_CTR,
+ 'class': algorithms.AES,
+ 'mode': modes.CTR,
'block-size': 16,
'key-size': 16
},
'aes192-ctr': {
- 'class': AES,
- 'mode': AES.MODE_CTR,
+ 'class': algorithms.AES,
+ 'mode': modes.CTR,
'block-size': 16,
'key-size': 24
},
'aes256-ctr': {
- 'class': AES,
- 'mode': AES.MODE_CTR,
+ 'class': algorithms.AES,
+ 'mode': modes.CTR,
'block-size': 16,
'key-size': 32
},
'blowfish-cbc': {
- 'class': Blowfish,
- 'mode': Blowfish.MODE_CBC,
+ 'class': algorithms.Blowfish,
+ 'mode': modes.CBC,
'block-size': 8,
'key-size': 16
},
'aes128-cbc': {
- 'class': AES,
- 'mode': AES.MODE_CBC,
+ 'class': algorithms.AES,
+ 'mode': modes.CBC,
'block-size': 16,
'key-size': 16
},
'aes192-cbc': {
- 'class': AES,
- 'mode': AES.MODE_CBC,
+ 'class': algorithms.AES,
+ 'mode': modes.CBC,
'block-size': 16,
'key-size': 24
},
'aes256-cbc': {
- 'class': AES,
- 'mode': AES.MODE_CBC,
+ 'class': algorithms.AES,
+ 'mode': modes.CBC,
'block-size': 16,
'key-size': 32
},
'3des-cbc': {
- 'class': DES3,
- 'mode': DES3.MODE_CBC,
+ 'class': algorithms.TripleDES,
+ 'mode': modes.CBC,
'block-size': 8,
'key-size': 24
},
'arcfour128': {
- 'class': ARC4,
+ 'class': algorithms.ARC4,
'mode': None,
'block-size': 8,
'key-size': 16
},
'arcfour256': {
- 'class': ARC4,
+ 'class': algorithms.ARC4,
'mode': None,
'block-size': 8,
'key-size': 32
},
}
+
_mac_info = {
'hmac-sha1': {'class': sha1, 'size': 20},
'hmac-sha1-96': {'class': sha1, 'size': 12},
@@ -1633,22 +1635,34 @@ class Transport (threading.Thread, ClosingContextManager):
sofar += digest
return out[:nbytes]
- def _get_cipher(self, name, key, iv):
+ def _get_cipher(self, name, key, iv, operation):
if name not in self._cipher_info:
raise SSHException('Unknown client cipher ' + name)
if name in ('arcfour128', 'arcfour256'):
# arcfour cipher
- cipher = self._cipher_info[name]['class'].new(key)
+ cipher = Cipher(
+ self._cipher_info[name]['class'](key),
+ None,
+ backend=default_backend()
+ )
+ if operation is self._ENCRYPT:
+ engine = cipher.encryptor()
+ else:
+ engine = cipher.decryptor()
# as per RFC 4345, the first 1536 bytes of keystream
# generated by the cipher MUST be discarded
- cipher.encrypt(" " * 1536)
- return cipher
- elif name.endswith("-ctr"):
- # CTR modes, we need a counter
- counter = Counter.new(nbits=self._cipher_info[name]['block-size'] * 8, initial_value=util.inflate_long(iv, True))
- return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter)
+ engine.encrypt(" " * 1536)
+ return engine
else:
- return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv)
+ cipher = Cipher(
+ self._cipher_info[name]['class'](key),
+ self._cipher_info[name]['mode'](iv),
+ backend=default_backend(),
+ )
+ if operation is self._ENCRYPT:
+ return cipher.encryptor()
+ else:
+ return cipher.decryptor()
def _set_forward_agent_handler(self, handler):
if handler is None:
@@ -2044,7 +2058,7 @@ class Transport (threading.Thread, ClosingContextManager):
else:
IV_in = self._compute_key('B', block_size)
key_in = self._compute_key('D', self._cipher_info[self.remote_cipher]['key-size'])
- engine = self._get_cipher(self.remote_cipher, key_in, IV_in)
+ engine = self._get_cipher(self.remote_cipher, key_in, IV_in, self._DECRYPT)
mac_size = self._mac_info[self.remote_mac]['size']
mac_engine = self._mac_info[self.remote_mac]['class']
# initial mac keys are done in the hash's natural size (not the
@@ -2071,7 +2085,7 @@ class Transport (threading.Thread, ClosingContextManager):
else:
IV_out = self._compute_key('A', block_size)
key_out = self._compute_key('C', self._cipher_info[self.local_cipher]['key-size'])
- engine = self._get_cipher(self.local_cipher, key_out, IV_out)
+ engine = self._get_cipher(self.local_cipher, key_out, IV_out, self._ENCRYPT)
mac_size = self._mac_info[self.local_mac]['size']
mac_engine = self._mac_info[self.local_mac]['class']
# initial mac keys are done in the hash's natural size (not the
diff --git a/paramiko/util.py b/paramiko/util.py
index 855e5757..5ad1e3fd 100644
--- a/paramiko/util.py
+++ b/paramiko/util.py
@@ -22,7 +22,6 @@ Useful functions used by the rest of paramiko.
from __future__ import generators
-import array
import errno
import sys
import struct
@@ -31,7 +30,7 @@ import threading
import logging
from paramiko.common import DEBUG, zero_byte, xffffffff, max_byte
-from paramiko.py3compat import PY2, long, byte_ord, b, byte_chr
+from paramiko.py3compat import PY2, long, byte_chr, byte_ord, b
from paramiko.config import SSHConfig
@@ -273,37 +272,6 @@ def retry_on_signal(function):
raise
-class Counter (object):
- """Stateful counter for CTR mode crypto"""
- def __init__(self, nbits, initial_value=long(1), overflow=long(0)):
- self.blocksize = nbits / 8
- self.overflow = overflow
- # start with value - 1 so we don't have to store intermediate values when counting
- # could the iv be 0?
- if initial_value == 0:
- self.value = array.array('c', max_byte * self.blocksize)
- else:
- x = deflate_long(initial_value - 1, add_sign_padding=False)
- self.value = array.array('c', zero_byte * (self.blocksize - len(x)) + x)
-
- def __call__(self):
- """Increament the counter and return the new value"""
- i = self.blocksize - 1
- while i > -1:
- c = self.value[i] = byte_chr((byte_ord(self.value[i]) + 1) % 256)
- if c != zero_byte:
- return self.value.tostring()
- i -= 1
- # counter reset
- x = deflate_long(self.overflow, add_sign_padding=False)
- self.value = array.array('c', zero_byte * (self.blocksize - len(x)) + x)
- return self.value.tostring()
-
- @classmethod
- def new(cls, nbits, initial_value=long(1), overflow=long(0)):
- return cls(nbits, initial_value=initial_value, overflow=overflow)
-
-
def constant_time_bytes_eq(a, b):
if len(a) != len(b):
return False
diff --git a/setup.py b/setup.py
index f9c4b4fe..4f3cab9d 100644
--- a/setup.py
+++ b/setup.py
@@ -24,7 +24,7 @@ connections between python scripts. All major ciphers and hash methods
are supported. SFTP client and server mode are both supported too.
Required packages:
- pyCrypto
+ Cryptography
To install the `in-development version
<https://github.com/paramiko/paramiko/tarball/master#egg=paramiko-dev>`_, use
@@ -41,8 +41,8 @@ try:
from setuptools import setup
kw = {
'install_requires': [
- 'pycrypto>=2.1,!=2.4',
- 'ecdsa>=0.11',
+ 'cryptography>=0.8',
+ 'pyasn1>=0.1.7',
],
}
except ImportError:
diff --git a/sites/www/index.rst b/sites/www/index.rst
index 8e7562af..340c984b 100644
--- a/sites/www/index.rst
+++ b/sites/www/index.rst
@@ -3,8 +3,9 @@ Welcome to Paramiko!
Paramiko is a Python (2.6+, 3.3+) implementation of the SSHv2 protocol [#]_,
providing both client and server functionality. While it leverages a Python C
-extension for low level cryptography (`PyCrypto <http://pycrypto.org>`_),
-Paramiko itself is a pure Python interface around SSH networking concepts.
+extension for low level cryptography
+(`Cryptography <http://cryptography.io>`_), Paramiko itself is a pure Python
+interface around SSH networking concepts.
This website covers project information for Paramiko such as the changelog,
contribution guidelines, development roadmap, news/blog, and so forth. Detailed
diff --git a/sites/www/installing-1.x.rst b/sites/www/installing-1.x.rst
new file mode 100644
index 00000000..0c2424bb
--- /dev/null
+++ b/sites/www/installing-1.x.rst
@@ -0,0 +1,94 @@
+Installing (1.x)
+================
+
+.. note:: Installing Paramiko 2.0 or above? See :doc:`installing` instead.
+
+This document includes legacy notes on installing Paramiko 1.x (specifically,
+1.13 and up). Users are strongly encouraged to upgrade to 2.0 when possible;
+PyCrypto (the dependency covered below) is no longer maintained and contains
+security vulnerabilities.
+
+General install notes
+=====================
+
+* Python 2.6+ and 3.3+ are supported; Python <=2.5 and 3.0-3.2 are **not
+ supported**.
+* See the note in the main install doc about :ref:`release-lines` for details
+ on specific versions you may want to install.
+
+ .. note:: 1.x will eventually be entirely end-of-lifed.
+* Paramiko 1.7-1.14 have only one dependency: :ref:`pycrypto`.
+* Paramiko 1.15+ (not including 2.x and above) add a second, pure-Python
+ dependency: the ``ecdsa`` module, trivially installable via PyPI.
+* Paramiko 1.15+ (again, not including 2.x and up) also allows you to
+ optionally install a few more dependencies to gain support for
+ :ref:`GSS-API/Kerberos <gssapi-on-1x>`.
+* Users on Windows may want to opt for the :ref:`pypm` approach.
+
+
+.. _pycrypto:
+
+PyCrypto
+========
+
+`PyCrypto <https://www.dlitz.net/software/pycrypto/>`__ provides the low-level
+(C-based) encryption algorithms we need to implement the SSH protocol. There
+are a couple gotchas associated with installing PyCrypto: its compatibility
+with Python's package tools, and the fact that it is a C-based extension.
+
+C extension
+-----------
+
+Unless you are installing from a precompiled source such as a Debian apt
+repository or RedHat RPM, or using :ref:`pypm <pypm>`, you will also need the
+ability to build Python C-based modules from source in order to install
+PyCrypto. Users on **Unix-based platforms** such as Ubuntu or Mac OS X will
+need the traditional C build toolchain installed (e.g. Developer Tools / XCode
+Tools on the Mac, or the ``build-essential`` package on Ubuntu or Debian Linux
+-- basically, anything with ``gcc``, ``make`` and so forth) as well as the
+Python development libraries, often named ``python-dev`` or similar.
+
+For **Windows** users we recommend using :ref:`pypm`, installing a C
+development environment such as `Cygwin <http://cygwin.com>`_ or obtaining a
+precompiled Win32 PyCrypto package from `voidspace's Python modules page
+<http://www.voidspace.org.uk/python/modules.shtml#pycrypto>`_.
+
+.. note::
+ Some Windows users whose Python is 64-bit have found that the PyCrypto
+ dependency ``winrandom`` may not install properly, leading to ImportErrors.
+ In this scenario, you'll probably need to compile ``winrandom`` yourself
+ via e.g. MS Visual Studio. See `Fabric #194
+ <https://github.com/fabric/fabric/issues/194>`_ for info.
+
+
+.. _pypm:
+
+ActivePython and PyPM
+=====================
+
+Windows users who already have ActiveState's `ActivePython
+<http://www.activestate.com/activepython/downloads>`_ distribution installed
+may find Paramiko is best installed with `its package manager, PyPM
+<http://code.activestate.com/pypm/>`_. Below is example output from an
+installation of Paramiko via ``pypm``::
+
+ C:\> pypm install paramiko
+ The following packages will be installed into "%APPDATA%\Python" (2.7):
+ paramiko-1.7.8 pycrypto-2.4
+ Get: [pypm-free.activestate.com] paramiko 1.7.8
+ Get: [pypm-free.activestate.com] pycrypto 2.4
+ Installing paramiko-1.7.8
+ Installing pycrypto-2.4
+ C:\>
+
+
+.. _gssapi-on-1x:
+
+Optional dependencies for GSS-API / SSPI / Kerberos
+===================================================
+
+First, see the main install doc's notes: :ref:`gssapi` - everything there is
+required for Paramiko 1.x as well.
+
+Additionally, users of Paramiko 1.x, on all platforms, need a final dependency:
+`pyasn1 <https://pypi.python.org/pypi/pyasn1>`_ ``0.1.7`` or better.
diff --git a/sites/www/installing.rst b/sites/www/installing.rst
index a657c3fc..5a41a76b 100644
--- a/sites/www/installing.rst
+++ b/sites/www/installing.rst
@@ -2,6 +2,13 @@
Installing
==========
+
+.. note::
+ These instructions cover Paramiko 2.0 and above. If you're looking to
+ install Paramiko 1.x, see :doc:`installing-1.x`. However, **the 1.x line
+ relies on insecure dependencies** so upgrading is strongly encouraged.
+
+
.. _paramiko-itself:
Paramiko itself
@@ -16,17 +23,15 @@ via `pip <http://pip-installer.org>`_::
Users who want the bleeding edge can install the development version via
``pip install paramiko==dev``.
-We currently support **Python 2.6, 2.7 and 3.3+** (Python **3.2** should also
-work but has a less-strong compatibility guarantee from us.) Users on Python
-2.5 or older are urged to upgrade.
+We currently support **Python 2.6, 2.7, 3.3+, and PyPy**. Users on Python 2.5
+or older (or 3.2 or older) are urged to upgrade.
-Paramiko has two hard dependencies: the pure-Python ECDSA module ``ecdsa``, and the
-PyCrypto C extension. ``ecdsa`` is easily installable from wherever you
-obtained Paramiko's package; PyCrypto may require more work. Read on for
-details.
+Paramiko has only one direct hard dependency: the Cryptography library. See
+:ref:`cryptography`.
If you need GSS-API / SSPI support, see :ref:`the below subsection on it
-<gssapi>` for details on additional dependencies.
+<gssapi>` for details on its optional dependencies.
+
.. _release-lines:
@@ -37,71 +42,52 @@ Users desiring stability may wish to pin themselves to a specific release line
once they first start using Paramiko; to assist in this, we guarantee bugfixes
for the last 2-3 releases including the latest stable one.
-If you're unsure which version to install, we have suggestions:
+This typically spans major & minor versions, so even if e.g. 3.1 is the latest
+stable release, it's likely that bugfixes will occasionally come out for the
+latest 2.x and perhaps even 1.x releases, as well as for 3.0. New feature
+releases for previous major-version lines are less likely but not unheard of.
+
+If you're unsure which version to install:
* **Completely new users** should always default to the **latest stable
release** (as above, whatever is newest / whatever shows up with ``pip
install paramiko``.)
-* **Users upgrading from a much older version** (e.g. the 1.7.x line) should
- probably get the **oldest actively supported line** (see the paragraph above
- this list for what that currently is.)
+* **Users upgrading from a much older version** (e.g. 1.7.x through 1.10.x)
+ should probably get the **oldest actively supported line** (check the
+ :doc:`changelog` for recent releases).
* **Everybody else** is hopefully already "on" a given version and can
carefully upgrade to whichever version they care to, when their release line
stops being supported.
-PyCrypto
-========
-
-`PyCrypto <https://www.dlitz.net/software/pycrypto/>`_ provides the low-level
-(C-based) encryption algorithms we need to implement the SSH protocol. There
-are a couple gotchas associated with installing PyCrypto: its compatibility
-with Python's package tools, and the fact that it is a C-based extension.
+.. _cryptography:
-C extension
------------
+Cryptography
+============
-Unless you are installing from a precompiled source such as a Debian apt
-repository or RedHat RPM, or using :ref:`pypm <pypm>`, you will also need the
-ability to build Python C-based modules from source in order to install
-PyCrypto. Users on **Unix-based platforms** such as Ubuntu or Mac OS X will
-need the traditional C build toolchain installed (e.g. Developer Tools / XCode
-Tools on the Mac, or the ``build-essential`` package on Ubuntu or Debian Linux
--- basically, anything with ``gcc``, ``make`` and so forth) as well as the
-Python development libraries, often named ``python-dev`` or similar.
+`Cryptography <https://cryptography.io>`__ provides the low-level (C-based)
+encryption algorithms we need to implement the SSH protocol. It has detailed
+`installation instructions`_ (and an `FAQ
+<https://cryptography.io/en/latest/faq/>`_) which you should read carefully.
-For **Windows** users we recommend using :ref:`pypm`, installing a C
-development environment such as `Cygwin <http://cygwin.com>`_ or obtaining a
-precompiled Win32 PyCrypto package from `voidspace's Python modules page
-<http://www.voidspace.org.uk/python/modules.shtml#pycrypto>`_.
+In general, you'll need one of the following setups:
-.. note::
- Some Windows users whose Python is 64-bit have found that the PyCrypto
- dependency ``winrandom`` may not install properly, leading to ImportErrors.
- In this scenario, you'll probably need to compile ``winrandom`` yourself
- via e.g. MS Visual Studio. See `Fabric #194
- <https://github.com/fabric/fabric/issues/194>`_ for info.
-
-
-.. _pypm:
-
-ActivePython and PyPM
-=====================
+* On Windows or Mac OS X, provided your ``pip`` is modern (8.x+): nothing else
+ is required. ``pip`` will install statically compiled binary archives of
+ Cryptography & its dependencies.
+* On Linux, or on other platforms with older versions of ``pip``: you'll need a
+ C build toolchain, plus development headers for Python, OpenSSL and
+ ``libffi``. Again, see `Cryptography's install docs`_; these requirements may
+ occasionally change.
-Windows users who already have ActiveState's `ActivePython
-<http://www.activestate.com/activepython/downloads>`_ distribution installed
-may find Paramiko is best installed with `its package manager, PyPM
-<http://code.activestate.com/pypm/>`_. Below is example output from an
-installation of Paramiko via ``pypm``::
+ .. warning::
+ If you go this route, note that **OpenSSL 1.0.1 or newer is effectively
+ required**. Cryptography 1.3 and older technically allow OpenSSL 0.9.8, but
+ 1.4 and newer - which Paramiko will gladly install or upgrade, if you e.g.
+ ``pip install -U`` - drop that support.
- C:\> pypm install paramiko
- The following packages will be installed into "%APPDATA%\Python" (2.7):
- paramiko-1.7.8 pycrypto-2.4
- Get: [pypm-free.activestate.com] paramiko 1.7.8
- Get: [pypm-free.activestate.com] pycrypto 2.4
- Installing paramiko-1.7.8
- Installing pycrypto-2.4
- C:\>
+.. _installation instructions:
+.. _Cryptography's install docs: https://cryptography.io/en/latest/installation/
.. _gssapi:
@@ -115,8 +101,6 @@ due to their infrequent utility & non-platform-agnostic requirements):
* It hopefully goes without saying but **all platforms** need **a working
installation of GSS-API itself**, e.g. Heimdal.
-* **All platforms** need `pyasn1 <https://pypi.python.org/pypi/pyasn1>`_
- ``0.1.7`` or better.
* **Unix** needs `python-gssapi <https://pypi.python.org/pypi/python-gssapi/>`_
``0.6.1`` or better.
@@ -130,3 +114,9 @@ due to their infrequent utility & non-platform-agnostic requirements):
delegation, make sure that the target host is trusted for delegation in the
active directory configuration. For details see:
http://technet.microsoft.com/en-us/library/cc738491%28v=ws.10%29.aspx
+
+
+.. toctree::
+ :hidden:
+
+ installing-1.x
diff --git a/tests/test_auth.py b/tests/test_auth.py
index ec78e3ce..23517790 100644
--- a/tests/test_auth.py
+++ b/tests/test_auth.py
@@ -83,13 +83,13 @@ class NullServer (ServerInterface):
return AUTH_SUCCESSFUL
return AUTH_PARTIALLY_SUCCESSFUL
return AUTH_FAILED
-
+
def check_auth_interactive(self, username, submethods):
if username == 'commie':
self.username = username
return InteractiveQuery('password', 'Please enter a password.', ('Password', False))
return AUTH_FAILED
-
+
def check_auth_interactive_response(self, responses):
if self.username == 'commie':
if (len(responses) == 1) and (responses[0] == 'cat'):
@@ -111,7 +111,7 @@ class AuthTest (unittest.TestCase):
self.ts.close()
self.socks.close()
self.sockc.close()
-
+
def start_server(self):
host_key = RSAKey.from_private_key_file(test_path('test_rsa.key'))
self.public_host_key = RSAKey(data=host_key.asbytes())
@@ -120,7 +120,7 @@ class AuthTest (unittest.TestCase):
self.server = NullServer()
self.assertTrue(not self.event.is_set())
self.ts.start_server(self.event, self.server)
-
+
def verify_finished(self):
self.event.wait(1.0)
self.assertTrue(self.event.is_set())
@@ -156,7 +156,7 @@ class AuthTest (unittest.TestCase):
self.assertTrue(issubclass(etype, AuthenticationException))
self.tc.auth_password(username='slowdive', password='pygmalion')
self.verify_finished()
-
+
def test_3_multipart_auth(self):
"""
verify that multipart auth works.
@@ -187,7 +187,7 @@ class AuthTest (unittest.TestCase):
self.assertEqual(self.got_prompts, [('Password', False)])
self.assertEqual([], remain)
self.verify_finished()
-
+
def test_5_interactive_auth_fallback(self):
"""
verify that a password auth attempt will fallback to "interactive"
diff --git a/tests/test_client.py b/tests/test_client.py
index d39febac..f42d79d9 100644
--- a/tests/test_client.py
+++ b/tests/test_client.py
@@ -22,6 +22,8 @@ Some unit tests for SSHClient.
from __future__ import with_statement
+import gc
+import platform
import socket
from tempfile import mkstemp
import threading
@@ -31,8 +33,9 @@ import warnings
import os
import time
from tests.util import test_path
+
import paramiko
-from paramiko.common import PY2, b
+from paramiko.common import PY2
from paramiko.ssh_exception import SSHException
@@ -278,14 +281,13 @@ class SSHClientTest (unittest.TestCase):
transport's packetizer) is closed.
"""
# Unclear why this is borked on Py3, but it is, and does not seem worth
- # pursuing at the moment.
+ # pursuing at the moment. Skipped on PyPy because it fails on travis
+ # for unknown reasons, works fine locally.
# XXX: It's the release of the references to e.g packetizer that fails
# in py3...
- if not PY2:
+ if not PY2 or platform.python_implementation() == "PyPy":
return
threading.Thread(target=self._run).start()
- host_key = paramiko.RSAKey.from_private_key_file(test_path('test_rsa.key'))
- public_host_key = paramiko.RSAKey(data=host_key.asbytes())
self.tc = paramiko.SSHClient()
self.tc.set_missing_host_key_policy(paramiko.AutoAddPolicy())
@@ -301,14 +303,10 @@ class SSHClientTest (unittest.TestCase):
self.tc.close()
del self.tc
- # hrm, sometimes p isn't cleared right away. why is that?
- #st = time.time()
- #while (time.time() - st < 5.0) and (p() is not None):
- # time.sleep(0.1)
-
- # instead of dumbly waiting for the GC to collect, force a collection
- # to see whether the SSHClient object is deallocated correctly
- import gc
+ # force a collection to see whether the SSHClient object is deallocated
+ # correctly. 2 GCs are needed to make sure it's really collected on
+ # PyPy
+ gc.collect()
gc.collect()
self.assertTrue(p() is None)
@@ -318,8 +316,6 @@ class SSHClientTest (unittest.TestCase):
verify that an SSHClient can be used a context manager
"""
threading.Thread(target=self._run).start()
- host_key = paramiko.RSAKey.from_private_key_file(test_path('test_rsa.key'))
- public_host_key = paramiko.RSAKey(data=host_key.asbytes())
with paramiko.SSHClient() as tc:
self.tc = tc
diff --git a/tests/test_packetizer.py b/tests/test_packetizer.py
index 8faec03c..ccfe26bd 100644
--- a/tests/test_packetizer.py
+++ b/tests/test_packetizer.py
@@ -23,9 +23,10 @@ Some unit tests for the ssh2 protocol in Transport.
import unittest
from hashlib import sha1
-from tests.loop import LoopSocket
+from cryptography.hazmat.backends import default_backend
+from cryptography.hazmat.primitives.ciphers import algorithms, Cipher, modes
-from Crypto.Cipher import AES
+from tests.loop import LoopSocket
from paramiko import Message, Packetizer, util
from paramiko.common import byte_chr, zero_byte
@@ -43,8 +44,12 @@ class PacketizerTest (unittest.TestCase):
p = Packetizer(wsock)
p.set_log(util.get_logger('paramiko.transport'))
p.set_hexdump(True)
- cipher = AES.new(zero_byte * 16, AES.MODE_CBC, x55 * 16)
- p.set_outbound_cipher(cipher, 16, sha1, 12, x1f * 20)
+ encryptor = Cipher(
+ algorithms.AES(zero_byte * 16),
+ modes.CBC(x55 * 16),
+ backend=default_backend()
+ ).encryptor()
+ p.set_outbound_cipher(encryptor, 16, sha1, 12, x1f * 20)
# message has to be at least 16 bytes long, so we'll have at least one
# block of data encrypted that contains zero random padding bytes
@@ -66,8 +71,12 @@ class PacketizerTest (unittest.TestCase):
p = Packetizer(rsock)
p.set_log(util.get_logger('paramiko.transport'))
p.set_hexdump(True)
- cipher = AES.new(zero_byte * 16, AES.MODE_CBC, x55 * 16)
- p.set_inbound_cipher(cipher, 16, sha1, 12, x1f * 20)
+ decryptor = Cipher(
+ algorithms.AES(zero_byte * 16),
+ modes.CBC(x55 * 16),
+ backend=default_backend()
+ ).decryptor()
+ p.set_inbound_cipher(decryptor, 16, sha1, 12, x1f * 20)
wsock.send(b'\x43\x91\x97\xbd\x5b\x50\xac\x25\x87\xc2\xc4\x6b\xc7\xe9\x38\xc0\x90\xd2\x16\x56\x0d\x71\x73\x61\x38\x7c\x4c\x3d\xfb\x97\x7d\xe2\x6e\x03\xb1\xa0\xc2\x1c\xd6\x41\x41\x4c\xb4\x59')
cmd, m = p.read_message()
self.assertEqual(100, cmd)
@@ -82,8 +91,12 @@ class PacketizerTest (unittest.TestCase):
p = Packetizer(wsock)
p.set_log(util.get_logger('paramiko.transport'))
p.set_hexdump(True)
- cipher = AES.new(zero_byte * 16, AES.MODE_CBC, x55 * 16)
- p.set_outbound_cipher(cipher, 16, sha1, 12, x1f * 20)
+ encryptor = Cipher(
+ algorithms.AES(zero_byte * 16),
+ modes.CBC(x55 * 16),
+ backend=default_backend()
+ ).encryptor()
+ p.set_outbound_cipher(encryptor, 16, sha1, 12, x1f * 20)
# message has to be at least 16 bytes long, so we'll have at least one
# block of data encrypted that contains zero random padding bytes
diff --git a/tests/test_pkey.py b/tests/test_pkey.py
index f673254f..ec128140 100644
--- a/tests/test_pkey.py
+++ b/tests/test_pkey.py
@@ -42,34 +42,34 @@ SIGNED_RSA = '20:d7:8a:31:21:cb:f7:92:12:f2:a4:89:37:f5:78:af:e6:16:b6:25:b9:97:
RSA_PRIVATE_OUT = """\
-----BEGIN RSA PRIVATE KEY-----
-MIICXAIBAAKCAIEA049W6geFpmsljTwfvI1UmKWWJPNFI74+vNKTk4dmzkQY2yAM
-s6FhlvhlI8ysU4oj71ZsRYMecHbBbxdN79+JRFVYTKaLqjwGENeTd+yv4q+V2PvZ
-v3fLnzApI3l7EJCqhWwJUHJ1jAkZzqDx0tyOL4uoZpww3nmE0kb3y21tH4cCASMC
-ggCAEiI6plhqipt4P05L3PYr0pHZq2VPEbE4k9eI/gRKo/c1VJxY3DJnc1cenKsk
-trQRtW3OxCEufqsX5PNec6VyKkW+Ox6beJjMKm4KF8ZDpKi9Nw6MdX3P6Gele9D9
-+ieyhVFljrnAqcXsgChTBOYlL2imqCs3qRGAJ3cMBIAx3VsCQQD3pIFVYW398kE0
-n0e1icEpkbDRV4c5iZVhu8xKy2yyfy6f6lClSb2+Ub9uns7F3+b5v0pYSHbE9+/r
-OpRq83AfAkEA2rMZlr8SnMXgnyka2LuggA9QgMYy18hyao1dUxySubNDa9N+q2QR
-mwDisTUgRFHKIlDHoQmzPbXAmYZX1YlDmQJBAPCRLS5epV0XOAc7pL762OaNhzHC
-veAfQKgVhKBt105PqaKpGyQ5AXcNlWQlPeTK4GBTbMrKDPna6RBkyrEJvV8CQBK+
-5O+p+kfztCrmRCE0p1tvBuZ3Y3GU1ptrM+KNa6mEZN1bRV8l1Z+SXJLYqv6Kquz/
-nBUeFq2Em3rfoSDugiMCQDyG3cxD5dKX3IgkhLyBWls/FLDk4x/DQ+NUTu0F1Cu6
-JJye+5ARLkL0EweMXf0tmIYfWItDLsWB0fKg/56h0js=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-----END RSA PRIVATE KEY-----
"""
DSS_PRIVATE_OUT = """\
-----BEGIN DSA PRIVATE KEY-----
-MIIBvgIBAAKCAIEA54GmA2d9HOv+3CYBBG7ZfBYCncIW2tWe6Dqzp+DCP+guNhtW
-2MDLqmX+HQQoJbHat/Uh63I2xPFaueID0jod4OPrlfUXIOSDqDy28Kdo0Hxen9RS
-G7Me4awwiKlHEHHD0sXrTwSplyPUTfK2S2hbkHk5yOuQSjPfEbsL6ukiNi8CFQDw
-z4UnmsGiSNu5iqjn3uTzwUpshwKCAIEAkxfFeY8P2wZpDjX0MimZl5wkoFQDL25c
-PzGBuB4OnB8NoUk/yjAHIIpEShw8V+LzouMK5CTJQo5+Ngw3qIch/WgRmMHy4kBq
-1SsXMjQCte1So6HBMvBPIW5SiMTmjCfZZiw4AYHK+B/JaOwaG9yRg2Ejg4Ok10+X
-FDxlqZo8Y+wCggCARmR7CCPjodxASvRbIyzaVpZoJ/Z6x7dAumV+ysrV1BVYd0lY
-ukmnjO1kKBWApqpH1ve9XDQYN8zgxM4b16L21kpoWQnZtXrY3GZ4/it9kUgyB7+N
-wacIBlXa8cMDL7Q/69o0d54U0X/NeX5QxuYR6OMJlrkQB7oiW/P/1mwjQgECFGI9
-QPSch9pT9XHqn+1rZ4bK+QGA
+MIIBuwIBAAKBgQDngaYDZ30c6/7cJgEEbtl8FgKdwhba1Z7oOrOn4MI/6C42G1bY
+wMuqZf4dBCglsdq39SHrcjbE8Vq54gPSOh3g4+uV9Rcg5IOoPLbwp2jQfF6f1FIb
+sx7hrDCIqUcQccPSxetPBKmXI9RN8rZLaFuQeTnI65BKM98Ruwvq6SI2LwIVAPDP
+hSeawaJI27mKqOfe5PPBSmyHAoGBAJMXxXmPD9sGaQ419DIpmZecJKBUAy9uXD8x
+gbgeDpwfDaFJP8owByCKREocPFfi86LjCuQkyUKOfjYMN6iHIf1oEZjB8uJAatUr
+FzI0ArXtUqOhwTLwTyFuUojE5own2WYsOAGByvgfyWjsGhvckYNhI4ODpNdPlxQ8
+ZamaPGPsAoGARmR7CCPjodxASvRbIyzaVpZoJ/Z6x7dAumV+ysrV1BVYd0lYukmn
+jO1kKBWApqpH1ve9XDQYN8zgxM4b16L21kpoWQnZtXrY3GZ4/it9kUgyB7+NwacI
+BlXa8cMDL7Q/69o0d54U0X/NeX5QxuYR6OMJlrkQB7oiW/P/1mwjQgECFGI9QPSc
+h9pT9XHqn+1rZ4bK+QGA
-----END DSA PRIVATE KEY-----
"""
@@ -121,7 +121,7 @@ class KeyTest (unittest.TestCase):
self.assertEqual(exp_rsa, my_rsa)
self.assertEqual(PUB_RSA.split()[1], key.get_base64())
self.assertEqual(1024, key.get_bits())
-
+
def test_4_load_dss(self):
key = DSSKey.from_private_key_file(test_path('test_dss.key'))
self.assertEqual('ssh-dss', key.get_name())
diff --git a/tox-requirements.txt b/tox-requirements.txt
index 26224ce6..47ddd792 100644
--- a/tox-requirements.txt
+++ b/tox-requirements.txt
@@ -1,2 +1,3 @@
# Not sure why tox can't just read setup.py?
-pycrypto
+cryptography >= 0.8
+pyasn1 >= 0.1.7
diff --git a/tox.ini b/tox.ini
index 7d4fcf8a..d420c1a3 100644
--- a/tox.ini
+++ b/tox.ini
@@ -1,5 +1,5 @@
[tox]
-envlist = py26,py27,py32,py33,py34
+envlist = py26,py27,py33,py34,pypy
[testenv]
commands = pip install -q -r tox-requirements.txt
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 19:19:48 +0000