summaryrefslogtreecommitdiffhomepage
path: root/src
AgeCommit message (Collapse)Author
2020-10-31dhcpv6: add DHCPv4-over-DHCPv6 supportMikael Magnusson
Add support for DHCPv4-over-DHCPv6 (DHCP 4o6) Transport (RFC 7341). Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-10-29dhcpv6: check message typeMikael Magnusson
Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net>
2020-09-07router: fix advertisement interval optionHans Dedecker
The variable maxival contains the maximum time in seconds between successive unsolicited Router Advertisement messages; RFC6275 defines the Advertisement Interval option as the time in milliseconds. Therefore convert maxival to milliseconds when populating the Advertisement Interval option. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-06-23odhcpd: fix compilation with GCC10Rosen Penev
GCC10 mandates the C++ one definition rule, which breaks on multiple definitions of config. Add the appropriate extern declaration. Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-05-03router: fix Lan host reachibility due to identical RIO and PIO prefixes ↵Hans Dedecker
(FS#3056) odhcpd includes RIO RA options according to requirement L3 in RFC7084. However if the delegated prefix length received on the wan is equal to the downstream delegated prefix length on the Lan this may pollute the routing table of type C hosts as the RIO routing entry can take precedence of the PIO routing entry meaning all traffic for the on link hosts will go via the router iso direct on link communication. If the traffic is dropped in the router hosts are unreachable; therefore don't include RIO options with prefixes and prefix length identical to those in a PIO RA option Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-04-04dhcpv6-ia: fix preferred and valid lifetimes in ubus ipv6leasesHans Dedecker
Since commit 6db312a698e920ff61505ef1f42469880829774d the preferred and valid lifetimes of the addresses/prefixes is based on the configured leasetime; as a result the displayed preferred and valid lifetimes need to be calculated based on the assignment lifetime as this is set to the lowest valid lifetime of the addresses/prefixes. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-03-28odhcpd: fix compilation with musl 1.2.0Rosen Penev
SYS_clock_gettime is gone with musl 1.2.0. Switched to the function. Also fixed two format strings that fail as time_t is 64-bit with 1.2.0. Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-03-14ubus: use dhcpv6 ia assignment flagHans Dedecker
Further align the code to use DHCPv6 assignment flags to distinguish between prefix delegation and non temporary address assignments Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-02-16dhcpv6-ia: avoid setting lifetime to infinite for static assignmentsHans Dedecker
Don't set the valid lifetime to infinite for static assignments but rather set it to the IA lifetime given to the client. This makes it possible to display the leasetime for static assigments and simplifies the code in several places Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-02-16dhcpv4: avoid setting lifetime to infinite for static assignmentsHans Dedecker
Don't set the valid lifetime to infinite for static assignments but rather set it to the leasetime given to the client. This makes it possible to display the leasetime for static assigments and simplifies the code in several places Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-01-16dhcpv6-ia: use dhcp leasetime to set preferred/valid statefull lifetimesHans Dedecker
Allow to set the preferred/valid lifetimes of IA_NA/IA_PD options based on the configured dhcp leasetime. DHCP leqasetime will be used to set the preferred/valid lifetimes in the IA_NA/IA_PD options unless the preferred/valid lifetimes of the IPv6 address are smaller then the DHCP leasetime. This will avoid IA_NA/IA_PD options being sent with infinite lifetimes due to the IPv6 address having infinite preferred/valid lifetimes like IPv6 ULA addresses. While at it rename dhcpv4_leasetime into dhcp_leasetime as the leasetime is used both for DHCPv4 and DHCPv6 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-01-02dhcpv6-ia: introduce DHCPv6 pd and ia assignments flagsHans Dedecker
Simplify the code by using specific flags which identify the assignment either as a DHCPv6 PD or NA assignment. This allows to remove implicit checks for PD and NA assignments based on the value of the assignment length parameter. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-12-31dhcpv6-ia: cleanup prefix delegation routesHans Dedecker
Remove prefix delegation routes as well in free_dhcpv6_assignment when cleaning up the assignment resources Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-12-31dhcpv6-ia: remove passing interface as parameter to apply_leaseHans Dedecker
As the assignment struct holds a pointer to the interface struct use this one in apply_lease iso passing interface as a parameter Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-12-15treewide: optimize syslog priority valuesHans Dedecker
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-10-13ndp: fix endian issueHans Dedecker
Fix endian issue introduced in commit 91a28e4 by using ND_NA_FLAG_SOLICITED defined in netinet/icmp6.h Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-10-01netlink: fix potential infinite loopsHans Dedecker
Fix potential infinite loops by checking the return code of nl_send_auto_complete; if nl_send_auto_complete fails pending will always have the value 1 as the finish callback will not be called resulting into an infinite loop Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-09-15netlink: rename netlink callback handlersHans Dedecker
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-09-15ndp: answer global-addressed NS manuallysfan5
An upstream router may address solicits to the global address of the target, these will not be answered by the kernel and not routed either due to link-local source. The NS will eventually be retried as multicast, but we want to avoid this. see also https://forum.archive.openwrt.org/viewtopic.php?id=40871 Signed-off-by: Stefan Alfers <sfan5@live.de>
2019-09-14dhcpv6: retry failed PD assignments on addrlist changeTian Hao
Currently only assignments with prefixes larger than the largest available one will be re-assigned on addrlist change events. Previously failed PD assignments are not taken into account, and these assignments will never have a chance to recover even if the address just added to the interface could satisfy them. Failed PD assignments could be very common when upstream prefix is obtained from a PPPoE WAN, as ISPs tend to terminate the PPPoE session after a fixed time period. Addresses on LAN could disappear and re-appear during WAN redial, and all existing PD assignments to clients in LAN will become failed when the addresses disappear. These assignments will not be recovered after WAN has been brought back up, and clients in LAN could no longer receive any PD prefix. This commit fixes the issue by including failed PD assignments in the re-assign list on addrlist change event, so that newly added prefixes can be put into use right after they are added to the interface. Signed-off-by: Tian Hao <haotia@gmail.com>
2019-09-12config: ra_management compatibility supportHans Dedecker
Keep supporting ra_management for backwards compatibility support; ra_management will only be processed if neither ra_slaac and ra_flags are set. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-09-03odhcpd: router: Fix out of scope memory accessHauke Mehrtens
A pointer to search_buf is accessed by search_domain outside of the if branch which defines search_buf. The compiler could already reuse this memory. Coverity: #1445747 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-08-28dhcpv6-ia: free assignment when validity timer expiresHans Dedecker
In case clid_len is set free assignment when validity timer expires Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-08-26router: speed up initial router advertisementsHans Dedecker
Speed up sending initial router advertisement messages as documented in RFC2461 point 6.2.4 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-08-19router: close socket upon NETEV_IFINDEX_CHANGE fixedKoen Aerts
Make sure the raw socket is removed from the uloop file descriptor list before the socket is closed as introduced in https://github.com/openwrt/odhcpd/commit/000182fe4f94a5a6ec139456a2b74f0cdea13b9c Related to https://github.com/openwrt/odhcpd/issues/135 Signed-off-by: Koen Aerts <aertskoen5@gmail.com>
2019-08-16router: fix previous commitHans Dedecker
After closing the router socket the value needs to be set to -1 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-08-14router: close socket upon NETEV_IFINDEX_CHANGEKoen Aerts
Make sure the socket is closed in a case where the bridge goes down as a result of NO-CARRIER on the bridge. If not present Router Discovery and Router Advertisement will break permanently after the bridge went down. Related to https://github.com/openwrt/odhcpd/issues/135 Signed-off-by: Koen Aerts <aertskoen5@gmail.com>
2019-08-08router: fix lingering uloop socket descriptorHans Dedecker
In case setting one of the socket options fails; make sure the raw socket is removed from the uloop file descriptor list before the socket is closed. In case this is not done and a new raw socket is created with the same fd value odhcpd will not be triggered by uloop in case RS messages are received on the socket as reported in https://github.com/openwrt/odhcpd/issues/135 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-07-07router: support ra_lifetime being 0Jan-Philipp Litza
The value 0 has the special meaning of not being a default router. This is useful to only advertise prefixes or DNS settings without being a real router. Signed-off-by: Jan-Philipp Litza <janphilipp@litza.de>
2019-05-17router: make RA flags configurable (FS#2019)Hans Dedecker
Replace the config option ra_management by the config options ra_flags and ra_slaac. The latter allows to configure the autonomous-address config flag used for stateless address configuration while the former allows to configure the RA flags in the form of a list. The list can hold the following values : managed-config other-config home-agent none Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-15config: remove 'ignore' config optionbpDainis Jonitis
1. Remove 'ignore' config option for interface. Interface is still used if any of 'ra', 'ndp', 'dhcpv4' or 'dhcpv6' options are different from default 'disabled' mode. In config_parse_interface() update runtime ignore value according to all mode values. 2. Reset ignore, ra, ndp, dhcpv4 and dhcpv6 values in set_interface_defaults(). Otherwise if option is deleted from config file and config is reloaded, it will use the value from old config, potentiallly not turning services off. 3. Do not use implicit checks that 0 server mode means MODE_DISABLED. 4. Simplify code of all service setup functions if passed enabled = true argument, but service mode is disabled. Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-15treewide: init assignment lists headHans Dedecker
When allocating an assignment in alloc_assignment; init the circular head and lease_list circular lists. Avoids checking NULL pointer when freeing the assignment in free_assignment. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-14config: use list safe iterator in lease_deleteHans Dedecker
As the current assignment is freed in lease_delete use list_for_each_entry_safe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-03dhcpv4: fix lease ordering by ip addressDainis Jonitis
1. Maintaining of sorted list was wrong for static lease case. Add dhcpv4_insert_assignment() helper function and use it from all places. 2. Add ip4toa() helper function to print ipv4 address that is stored as network byte-order uint32_t. Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-03config: use multi-stage parsing of uci sectionsDainis Jonitis
When loading uci sections from config file, in one pass do not mix sections from different types. First load odhcpd global settings, then all interface sections and finally static leases. It ensures that section order in file can't affect what information is already parsed. For example static lease section may need information about all interfaces, to decide whether ip address belongs to any of currently defined interfaces/address pools. Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
2019-05-03treewide: always init interface list heads during initializationDainis Jonitis
When allocating interface, init dhcpv4_assignments, dhcpv4_fr_ips and ia_assignments circular list heads to point to self. Avoids checking whether next pointer is not null all over the place. Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
2019-05-03dhcpv4: do not allow pool end address to overlap with broadcast addressDainis Jonitis
Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
2019-05-03treewide: give file descriptors safe initial valueDainis Jonitis
Since main problem of assuming that fd==0 is invalid value was fixed in upstream odhcpd by e7b1d4bf3a2297192638b9c84208b3dcb306ecd8 then what is left are minor problems of static initialization of some global fd variables. Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
2019-05-03dhcpv4: DHCP pool size is off-by-oneDainis Jonitis
1. "limit" option should specify the size of dynamic pool. The dhcpv4_end includes the last valid pool address. 2. Also handle 7 bit host addresses when not directly specified in config file. 3. Make sure code does what documentation says and default 'start'/'limit' pool options to 100 and 150 respectively. Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-02dhcpv4: add support for Parameter Request List option 55Dainis Jonitis
Add client "reqopts" in ubus "ipv4leases" output. Signed-off-by: Roman Yeryomin <roman.yeryomin@ubnt.com> Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
2019-04-26dhcpv4: fix DHCP packet sizeHans Dedecker
Calculate the DHCP packet size based on the number of DHCP options in the message. Make sure the DHCP packet size does not go lower than 300 bytes as some clients ignore DHCP messages smaller than 300 bytes. Based on a patch by Dainis Jonitis <dainis.jonitis@ubnt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-23ndp: fix syslog flooding (FS#2242)Hans Dedecker
Only log a syslog error in case adding of a proxy neighbor fails as a delete failure cannot be considered as a syslog error for all cases. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-23config: set default loglevel to LOG_WARNINGHans Dedecker
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-19router: fix dns search list optionHans Dedecker
Fix regression issue introduced in commit 0523bdd as empty DNS search list option was sent making the RA message invalid Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-17router: use ra_lifetime as lifetime for RA options (FS#2206)Hans Dedecker
Use the RA lifetime as lifetime for the recursive DNS and DNS search options For the route options use as lifetime the smallest value of either the valid lifetime of the address associated with the route or the RA lifetime. This avoids routes having infinite lifetime being installed in downstream clients which can results into routes pointing to a removed router. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-17router: improve code readibilityHans Dedecker
No functional changes; just improve code readibilty in send_router_advert() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-16Revert "router:"Hans Dedecker
This reverts commit f1d7da9801adc0a77c1a35363e4242544c4915e7.
2019-04-16treewide: align syslog loglevelsHans Dedecker
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-12router:Hans Dedecker
2019-04-11treewide: fix compiler warningsHans Dedecker
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 19:35:37 +0000