Age | Commit message (Collapse) | Author |
|
1. "limit" option should specify the size of dynamic pool. The dhcpv4_end
includes the last valid pool address.
2. Also handle 7 bit host addresses when not directly specified in config file.
3. Make sure code does what documentation says and default 'start'/'limit'
pool options to 100 and 150 respectively.
Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add client "reqopts" in ubus "ipv4leases" output.
Signed-off-by: Roman Yeryomin <roman.yeryomin@ubnt.com>
Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
|
|
Calculate the DHCP packet size based on the number of DHCP options in the
message. Make sure the DHCP packet size does not go lower than 300 bytes
as some clients ignore DHCP messages smaller than 300 bytes.
Based on a patch by Dainis Jonitis <dainis.jonitis@ubnt.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Only log a syslog error in case adding of a proxy neighbor fails as a delete
failure cannot be considered as a syslog error for all cases.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fix regression issue introduced in commit 0523bdd as empty DNS search
list option was sent making the RA message invalid
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use the RA lifetime as lifetime for the recursive DNS and DNS search options
For the route options use as lifetime the smallest value of either the valid
lifetime of the address associated with the route or the RA lifetime.
This avoids routes having infinite lifetime being installed in downstream
clients which can results into routes pointing to a removed router.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
No functional changes; just improve code readibilty in send_router_advert()
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
This reverts commit f1d7da9801adc0a77c1a35363e4242544c4915e7.
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Get rid of the global raw ICMPv6 socket by creating a raw ICMPv6 ping socket
per interface. This fixes an open raw ICMPv6 socket in case all ndp interfaces
are configured as disabled.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Get rid of the global raw ICMPv6 socket by creating a raw ICMPv6 socket per
interface. This fixes an open raw ICMPv6 socket in case all ra interfaces
are configured as disabled.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Initialzie properly the dhcpv6, dhcpv4 and ndp ffile descriptors
when creating an interface.
As such the check for a valid descriptor can be done correct now
in the different modules
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework logic to refresh IPv4 addresses so we can get rid of the
second for loop
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework logic to refresh IPv6 addresses so we can get rid of the
second for loop
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Keep the valid and preferred lifetimes in sync with the kernel by always
updating the cached IPv6 addresses in refesh_iface_addr6().
This fixes invalid preferred and valid IA lifetimes in DHCPv6 reply
messages due to the cached preferred and valid lifetimes not being in
sync with the preferred and valid kernel lifetimes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Support multiple master interfaces for dhcpv6 and ra; it allows
to forward dhcpv6 mesaages and RS on multiple upstream links
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
In case multiple logical OpenWrt interfaces are stacked on the same device
and one of the interfaces is configured in relay and the other not; adding
a proxy neighbor entry will result into it immediately being deleted if
the interface in non relay mode comes last.
Fix this by not doing a delete on the interface which is not configured in
relay mode.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Commit a54cee0 introduced a regression in the handling of netlink neighbor
events as it did not set the interface pointer in the netevent_handler_info
struct resulting into a breakage of ndp relay mode
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Commit 9f25dd8af76dc30e54ddcbb4a284058e598951d5 changed the logic of
handle_update by only triggering an update if the interface is
found in the interface list and is not set as to be ignored.
However this breaks the behavior of loading the dhcp config for
interfaces which were previously not yet known by netifd and as
result were not yet created in the interface list.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add assignment to the tail of the list in case the last element
is not bigger
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Function config_find_lease_by_ip_addr expects IP address in network
byte order
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Replace the separate dhcpv4/dhcpv6 assignment free functions by
the function free_assignment which calls the dhcp specific
free function via a callback
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fix assignment of requested IP address by a client in case the
assignment list is empty.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework the static lease logic as the existing logic had different issues.
Static leases are now added in a vlist tree which makes it easier to handle
static lease config changes.
For both DHCPv4 and DHCPv6 static assignments are now created upon the
receival of DHCPv4/DHCPv6 messages as before the static assignment was
created even if the client was not physically present.
In case a hostname is specified in a static lease it won't be overriden
anymore by the hostname received from the client.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add support for rapid commit according to RFC8415 18.3.1
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Commit 0db69b0b85c83fedd74ac77e850669a17c4e6617 broke parsing of DHCPv6
relay messages as the DHCPv6 client header pointer was not updated
after parsing the nested relay forward message(s).
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fix compile issue introduced in commit 671ccaabc893b53be8a1891aaf2236b657d6ce06
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use struct dhcpv6_client_header hdr to access fixed DHCPv6 header fields
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Multiple logical OpenWrt interfaces can be stacked on top of the same
Linux device. As such netlink events for addresses/routes/ifindex changes
need to be propagated to the different logical OpenWrt interfaces
which use the Linux device as reported in the netlink message.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Store the interfaces in an avl tree iso a linear linked list
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use the logical OpenWrt interface name in syslog printing as multiple
logical interfaces can be defined on top of the same device
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add CONFIRM support as specified in RFC8415 paragraph 18.3.3
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fixes :
src/dhcpv6-ia.c:1117:22: warning: variable 'onlink' set but not used [-Wunused-but-set-variable]
for (size_t i = 0, onlink = false; i < addrlen; ++i) {
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Some DHCPv6 clients start sending SOLICIT messages without including either
an IA_NA or IA_PD and only start including an IA_NA or IA_PD in the REQUEST
message without including an IA_PREFIX or IA_ADDR as suboption. As a result
the check to verify if an IA_ADDR and/or IA_PREFIX is onlink fails.
Fix this by returning notonlink if an IA_PREFIX or IA_ADDR suboption is
present having an address/prefix not matching any of the addresses
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Adds the config options to set if DHCPv6 'stateful addresing' hands out
IA_NA (Internet Address - Network Address), IA_PD (Internet Address -
Prefix Delegation), both or none.
Signed-off-by: Matija Amidzic <matija.amidzic@sartura.hr>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Commit 750e457e3000187b85906814a2529ede24775325 added the capability
to filter out prefixes in RAs; however routes were not filtered out
based on the prefixes. This commit fixes this by taking into account
the prefix_filter when constructing the RA route info option
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Make announcing options Recursive DNS server and DNS search list
configurable via the ra_dns config option.
This allows to disable sending RA based DNS info if such info is
already provided by DHCPv6.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Check if odhcpd_get_interface_dns_addr() returns a valid DNS address.
While at it restructure the DNS RA code to make it more readable
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Don't accept 0.0.0.0 and :: as DNS addresses.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|