| Age | Commit message (Collapse) | Author |
|---|
|
Allows sharing leases between odhcpd instances running
in multiple hosts.
Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Adds the config option to set if ipv6 dns service is availiable on the
interface. In some cases the dns service may not be listening on the
ipv6 address of the interface, and thus should not be announced to clients.
Signed-off-by: Paizhuo Chen <cc@icpz.dev>
|
|
Add support for DHCPv4-over-DHCPv6 (DHCP 4o6) Transport (RFC 7341).
Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
GCC10 mandates the C++ one definition rule, which breaks on multiple
definitions of config. Add the appropriate extern declaration.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to set the preferred/valid lifetimes of IA_NA/IA_PD options based
on the configured dhcp leasetime.
DHCP leqasetime will be used to set the preferred/valid lifetimes in the
IA_NA/IA_PD options unless the preferred/valid lifetimes of the IPv6
address are smaller then the DHCP leasetime.
This will avoid IA_NA/IA_PD options being sent with infinite lifetimes
due to the IPv6 address having infinite preferred/valid lifetimes
like IPv6 ULA addresses.
While at it rename dhcpv4_leasetime into dhcp_leasetime as the leasetime
is used both for DHCPv4 and DHCPv6
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Simplify the code by using specific flags which identify the assignment
either as a DHCPv6 PD or NA assignment. This allows to remove implicit
checks for PD and NA assignments based on the value of the assignment
length parameter.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
An upstream router may address solicits to the global address of the target,
these will not be answered by the kernel and not routed either due to link-local
source. The NS will eventually be retried as multicast, but we want to avoid this.
see also https://forum.archive.openwrt.org/viewtopic.php?id=40871
Signed-off-by: Stefan Alfers <sfan5@live.de>
|
|
Speed up sending initial router advertisement messages as documented in
RFC2461 point 6.2.4
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Replace the config option ra_management by the config options ra_flags
and ra_slaac. The latter allows to configure the autonomous-address
config flag used for stateless address configuration while the former
allows to configure the RA flags in the form of a list.
The list can hold the following values :
managed-config
other-config
home-agent
none
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
When allocating an assignment in alloc_assignment; init the circular head
and lease_list circular lists. Avoids checking NULL pointer when freeing
the assignment in free_assignment.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add client "reqopts" in ubus "ipv4leases" output.
Signed-off-by: Roman Yeryomin <roman.yeryomin@ubnt.com>
Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
|
|
Get rid of the global raw ICMPv6 socket by creating a raw ICMPv6 ping socket
per interface. This fixes an open raw ICMPv6 socket in case all ndp interfaces
are configured as disabled.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Get rid of the global raw ICMPv6 socket by creating a raw ICMPv6 socket per
interface. This fixes an open raw ICMPv6 socket in case all ra interfaces
are configured as disabled.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Support multiple master interfaces for dhcpv6 and ra; it allows
to forward dhcpv6 mesaages and RS on multiple upstream links
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Replace the separate dhcpv4/dhcpv6 assignment free functions by
the function free_assignment which calls the dhcp specific
free function via a callback
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework the static lease logic as the existing logic had different issues.
Static leases are now added in a vlist tree which makes it easier to handle
static lease config changes.
For both DHCPv4 and DHCPv6 static assignments are now created upon the
receival of DHCPv4/DHCPv6 messages as before the static assignment was
created even if the client was not physically present.
In case a hostname is specified in a static lease it won't be overriden
anymore by the hostname received from the client.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Multiple logical OpenWrt interfaces can be stacked on top of the same
Linux device. As such netlink events for addresses/routes/ifindex changes
need to be propagated to the different logical OpenWrt interfaces
which use the Linux device as reported in the netlink message.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Store the interfaces in an avl tree iso a linear linked list
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Adds the config options to set if DHCPv6 'stateful addresing' hands out
IA_NA (Internet Address - Network Address), IA_PD (Internet Address -
Prefix Delegation), both or none.
Signed-off-by: Matija Amidzic <matija.amidzic@sartura.hr>
|
|
Make announcing options Recursive DNS server and DNS search list
configurable via the ra_dns config option.
This allows to disable sending RA based DNS info if such info is
already provided by DHCPv6.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Check hostnames contain valid characters as defined in RFC 952 and RFC 1123.
Invalid hostnames in uci configured host entries will result into a refusal
to create the static lease.
In case a client received hostname contains an invalid character no
<hostname> <IP address> entry will be added to the lease file.
In such case the leaseinfo description in the lease file will still contain
the hostname but preceded by the string broken\x20
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Improve error checking fixing resource leak detected by Coverity in CID
1430880.
Further fix unchecked return value reported by Coverity in CIDs 1430872,
1430839, 1430831 and 1412382
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Whe doing an assignment lookup do a strict match between the assignment
IAID and the IAID received form the client in case the BOUND or TENTATIVE
assignment flags are set.
This fixes a wrong assignment being returned for a client which uses a
different IAID than the IAID used in a previous DHCPv6 exchange.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
IETF is moving toward implementing IPv6 multihoming by sending
multiple RAs on a single interface:
- draft-ietf-intarea-provisioning-domains-00
- draft-ietf-rtgwg-enterprise-pa-multihoming-02
odhcpd supports configuration of multiple software interfaces
on the same physical interface, which already advertises
multiple RAs, but had two issues:
- Each RA includes all the prefixes available on the interface.
- Replies to sollicits with a single RA.
This patch introduces the prefix_filter configuration parameter
which allows filtering prefixes that are sent in a given RA,
and fixes the sollicit code in order to reply with all the RAs
that are configured on a given interface.
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
If the ubus object has any subscription notify DHCP ACK and DHCP RELEASE
events using ubus notifications.
Signed-off-by: Borja Salazar <borja.salazar@fon.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Make DHCPv4 support compile time configurable; avoids DHCPv4 functionality
overlap with other packages.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework the handling of netlink events by letting the different
modules ndp, ra, dhcpv6 and dhcpv4 install netevent handlers.
The installed netevent handlers are called by the netlink logic
passing an event indication together with event data.
Each netevent handler implements its own event logic; this
makes the code more modular and less complex by moving all
netlink code to netlink.c
While at it rename ia_addr and ia_addr_len into addr6 and
addr6_len respectively
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
First step in moving netlink code to netlink.c by
moving netlink code from odhcpd.c to netlink.c
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Support force renew nonce authentication support in the DHCPv4 server as
described in RFC3203 and RFC6704.
The interface uci arameter dhcpv4_forcereconf allows to supports DHCPv4
clients which support force renew without authentication.
While at it align network byte order logic for simplicity.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Remove the unfortunate RELAYD naming in the different macros
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Align IPv4 address logic with IPv6 by caching per interface the assigned
IPv4 addresses. This allows to get rid of different ioctl calls in the
DHCPv4 logic to retrieve the IPv4 address and netmask in use by an
interface.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Some client implementations expect DHCPv6 addresses to be assigned for
every prefix present in a RA as reported in FS#524; if not done the
client implementations spam the DHCPv6 server with SOLICIT messages
trying to get an DHCPv6 address for every prefix.
When ra_managed is set to 1 and an ULA prefix is configured; the DHCPv6
server will only assign an ULA DHCPv6 addresses which possibly leads to
DNS issues.
Fix these problems by providing dhcpv6_assignall config option which
assigns all viable DHCPv6 addresses to a client by default.
This is a trade off as it means client implementations will be assigned
more IPv6 addresses and lose the ability to quickly renumber clients
which don't support reconfigure accept in case of wan prefix change
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Improve code readability by renaming managed into ra_managed and
define the according ra_managed flags.
This will help to better understand the ra_managed logic as defined
in the README file.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Retrieve IPv6 interface addresses when the interface gets created; this
allows to get rid of the IPv6 address dump logic in ndp.c.
Add IPv4 address support in odhcp_ipaddr struct.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework code to get rid of RELAYD_MAX_PREFIXES and RELAYD_MAX_ADDRS
by using dynamic IPv6 address array allocation.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Get rid of IFNAMSIZE usage for interface name and ifname variables
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use integer type for mtu variable as odhcpd_get_interface_config returns
-1 when it fails to read the interface mtu. This allows to set the mtu
to a meaningfull value of 1280 in case of interface mtu read failure.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to specify the router advertisement retrans time via the uci
parameter ra_retranstime. If retransmit time is not configured the
value is set to 0 in RA message meaning undefined.
|
|
Allow to specify the router advertisement reachable time via the uci
parameter ra_reachabletime. If reachable time is not configured the
value is set to 0 in RA message meaning undefined.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to specify the router advertisement current hop limit via the uci
parameter ra_hoplimit. If hoplimit is not configured the hoplimit is
taken from the interface as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to specify the router advertisement mtu via the uci parameter
ra_mtu. In case the config parameter is not set the MTU is taken from
the interface as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
In case maindhcp is set to disabled in global config one expect the DHCPv4
server not being started irrespective if the dhcpv4 interface config is set
to server.
Fix this by keeping maindhcp config apart from the legacy config parameter
as already documented in the README.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Don't return anymore the link local IPv6 address as DNS IPv6 address
since different OS implementations (e.g. android, ...) cannot handle
a link local IPv6 address as DNS address.
IPv6 DNS address selection is reworked as follows :
-Consider all global/ULA IPv6 address having a valid lifetime
-Give preference to global/ULA IPv6 addresses being not deprecated
-Give preference to ULA IPv6 addresses over IPv6 global addresses
-Give preference to the IPv6 address with the longest preferred lifetime in
its selected category (ULA or global)
-If no global/ULA IPv6 address is present use the IPv6 link local address
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
