| Age | Commit message (Collapse) | Author |
|---|
|
Some client implementations expect DHCPv6 addresses to be assigned for
every prefix present in a RA as reported in FS#524; if not done the
client implementations spam the DHCPv6 server with SOLICIT messages
trying to get an DHCPv6 address for every prefix.
When ra_managed is set to 1 and an ULA prefix is configured; the DHCPv6
server will only assign an ULA DHCPv6 addresses which possibly leads to
DNS issues.
Fix these problems by providing dhcpv6_assignall config option which
assigns all viable DHCPv6 addresses to a client by default.
This is a trade off as it means client implementations will be assigned
more IPv6 addresses and lose the ability to quickly renumber clients
which don't support reconfigure accept in case of wan prefix change
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Improve code readability by renaming managed into ra_managed and
define the according ra_managed flags.
This will help to better understand the ra_managed logic as defined
in the README file.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Retrieve IPv6 interface addresses when the interface gets created; this
allows to get rid of the IPv6 address dump logic in ndp.c.
Add IPv4 address support in odhcp_ipaddr struct.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework code to get rid of RELAYD_MAX_PREFIXES and RELAYD_MAX_ADDRS
by using dynamic IPv6 address array allocation.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Get rid of IFNAMSIZE usage for interface name and ifname variables
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use integer type for mtu variable as odhcpd_get_interface_config returns
-1 when it fails to read the interface mtu. This allows to set the mtu
to a meaningfull value of 1280 in case of interface mtu read failure.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to specify the router advertisement retrans time via the uci
parameter ra_retranstime. If retransmit time is not configured the
value is set to 0 in RA message meaning undefined.
|
|
Allow to specify the router advertisement reachable time via the uci
parameter ra_reachabletime. If reachable time is not configured the
value is set to 0 in RA message meaning undefined.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to specify the router advertisement current hop limit via the uci
parameter ra_hoplimit. If hoplimit is not configured the hoplimit is
taken from the interface as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Allow to specify the router advertisement mtu via the uci parameter
ra_mtu. In case the config parameter is not set the MTU is taken from
the interface as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
In case maindhcp is set to disabled in global config one expect the DHCPv4
server not being started irrespective if the dhcpv4 interface config is set
to server.
Fix this by keeping maindhcp config apart from the legacy config parameter
as already documented in the README.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Don't return anymore the link local IPv6 address as DNS IPv6 address
since different OS implementations (e.g. android, ...) cannot handle
a link local IPv6 address as DNS address.
IPv6 DNS address selection is reworked as follows :
-Consider all global/ULA IPv6 address having a valid lifetime
-Give preference to global/ULA IPv6 addresses being not deprecated
-Give preference to ULA IPv6 addresses over IPv6 global addresses
-Give preference to the IPv6 address with the longest preferred lifetime in
its selected category (ULA or global)
-If no global/ULA IPv6 address is present use the IPv6 link local address
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Make the code more logical by moving the IPv6 address dump logic into the
different protocol interface enable handlers so it's clear which protocols
require interface IPv6 address tracking.
At the same time restructure the IPv6 address dump logic so less IPv6 address
netlink dumps are created.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add config option ra_useleasetime which allows the RA prefix lifetime
being set to the leasetime in case the valid and/or preferred prefix
lifetime is bigger than the configured leasetime.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add support for uci parameters ra_mininterval and ra_lifetime as described
in RFC4861 paragraph 6.2.1.
Variable ra_mininterval allows to configure the minimum interval time
between unsolicited router advertisement messages; default value is
200 seconds. The minimum allowed value is 4 seconds while the maximum
value is limited to 0.75 of the maximum interval time.
The calculation of the maximum interval time between unsolicited
router advertisement messages has been reworked. The default value is 600
seconds as specified in RFC4861; if the maximum interval time exceeds
0.33 * the minimal valid lifetime of all IPv6 prefixes it will be limited
to 0.33 * the minimal valid lifetime of all IPv6 prefixes
Variable ra_lifetime allows to configure the Router Lifetime field
in the router advertisement messages; the value is either 0 or a value
between the maximum interval time and 9000 seconds. If the router lifetime
is smaller than the RA maximum interval it will be set equal to the RA
maximum interval time.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
This reverts commit 62ea54f5db4c636710781056541c4b85d043bef8.
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Deregister netlink event socket in case of error different
from ENOBUFS or failure to set netlink rx buffer size
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Start with a netlink receive buffersize of 130k for the netlink event socket;
double the netlink receive buffer size in case an ENOBUFS is reported.
Also align function naming and its parameters.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Rework the IPv6 relay logic to make it more robust by making
use of libnltiny to process netlink messages.
At the same time reimplement the IPv6 relay finite state machine
to make the relay logic less error prone
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use libnl-tiny to construct and process netlink messages when
manipulating IPv6 routes and fetching IPv6 addresses.
This fixes lingering netlink error messages on the netlink socket
in case route deletion failed causing fetching of IPv6 addresses
to be aborted and odhcpd faultly assuming no IPv6 addresses being
present on the interface.
|
|
ia_reconf is only set but nowhere used; so let's remove it ...
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
In case infinite leasetime is assigned to a non static DHCPv4/v6 lease
override the infinite lifetime of the lease when either a DHCPv4/v6
decline or release is received.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Set bound flag for DHCPv4 and DHCPv6 assignments when the IPv6/IPv4 address
is leased to a client.
This will prevent the printing of leases and hostname/IPv4/IPv6 address
combinations in the state file for for which the IPv4/6 address has not
been assigned.
Also this will fix the printing of assignments which have been declined
by the clients
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Add support for infinite leasetime value; this can be done by
specifying "infinite" as leasetime value which is similar to
dnsmasq infinite leasetime support.
Specifying "infinite" as leasetime is valid for both the host
and dhcp uci sections.
A DHCPv4/DHCPv6 assignment is now considered infinite if valid_unil
holds the value 0.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Patch by Daniel Dickinson
Signed-off-by: Steven Barth <steven@midlink.org>
|
|
|
|
|
|
|
|
RFC: dhcpv4 support openwrt alias ip addr
|
|
|
|
|
|
|
|
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
|
|
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
|
|
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
|
|
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
|
|
|
|
Fix selection of IPv6 DNS address in DHCPv6 and RA overwrite as an address could be selected
with preferred lifetime zero while IPv6 addresses are in use with non zero preferred
lifetimes.
Fix tries to pick the IPv6 address with the longest preferred lifetime now.
Fixes also the issue an IPv6 address with preferred lifetime zero could be returned in DHCPv6
DNS server option while an IPv6 address with non zero preferred lifetime is returned as DNS
recursive RA option for the same set of available IPv6 addresses.
|
|
|
|
|
|
|
|
RFC 2132 defines:
3.5. Router Option
The router option specifies a list of IP addresses for routers on the
client's subnet. Routers SHOULD be listed in order of preference.
The code for the router option is 3. The minimum length for the
router option is 4 octets, and the length MUST always be a multiple
of 4.
Code Len Address 1 Address 2
+-----+-----+-----+-----+-----+-----+-----+-----+--
| 3 | n | a1 | a2 | a3 | a4 | a1 | a2 | ...
+-----+-----+-----+-----+-----+-----+-----+-----+--
|
|
|
