| Age | Commit message (Collapse) | Author |
|---|
|
Parse 6rd specific settings prefix, relay-prefix as nested json data objects.
At the same time improve 6rd error handling.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fixes
system-linux.c:1998:33: error: comparison of unsigned expression >= 0 is always true [-Werror,-Wtautological-compare]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This hook makes it possible to do some helper work in hotplug scripts
when a connection is not established successfully.
example: try several username/passwords from a pool to establish a
pppoe or wwan connection by replacing the configured values of the
connection in a hotplug script.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
|
|
Run the bridge_reset_primary function only after the member being removed
has been marked as not present.
This change prevents the bridge_reset_primary function from choosing the
member being removed as the new primary member.
Signed-off-by: Alex Oprea <alex.oprea@inteno.se>
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Not all topology or connectivity changes may be detected by netifd,
depending on the underlying technology (e.g. VPN software); this adds a way
to explicitly trigger a renew.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
system_rtn_aton() was already parsing "throw" correctly, but system_rt()
did now allow it.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
|
|
The context is that we generate some of the UCI config
for netifd via scripts/programs.
Every once in a while, there's a goof when doing that
UCI generation, and netifd prints out the error at
stderr, but returns 0 (success) err-code.
This change will fail the ubus call if UCI config
is invalid or missing for /etc/config/network.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Commit 235a02424c3ab1b59308895c4f00395dacf2557c adds support for IPv6 link-local
DNS server by appending the device name; however the interface ifname parameter
does not always contain the layer 3 device name (e.g it can hold the aliased
interface name)
Fix this by passing the device name of the referenced layer 3 device.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Trigger interface update event when IPv6 prefix lifetime changes by setting
the prefix indicator flag to inform external subsystems (eg hnetd) about IPv6
prefix lifetime changes.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Parse vti specific settings ikey and okey as nested json data object.
At the same time remove the now obsolete TUNNEL_ATTR_INFO attribute.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Parse gre specific settings ikey, okey, icsum, ocsum, iseqno and oseqno
as nested json data object
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
VXLAN shares many attributes with the tunnel devices, so it is implemented
as a new tunnel type. The 'remote' attribute can be used for an unicast
peer or a multicast group.
The IANA-assigned port 4789 is used by default, instead of the non-standard
port Linux defaults to.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
The UCI parameter neighlocktime allows to control the hardware
address to IP mapping lock time in the IPv4 neighbour table.
The IPv6 lock time was not set because it is not used at all in any
kernel versions, hardware address override being controlled in this case
by the override flag present in the NA packet.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
|
|
In case of prefix delegation prefixes are assigned to one or more
configured downstream interfaces. The delegated prefix length in
combination with the assignment length of the downstream interfaces
determines the number of subnets which can be allocated from the
delegated prefix.
The interface ip6weight parameter allows to prioritize the allocation
of subnets to interfaces in case of multiple configured downstream
interfaces.
The order of interface prefix assignment from a delegated prefix is
based on the following parameters:
- Primary key is prefix assignment based on the configured interface ip6hint
- Secondary key is the requested downstream interface prefix length,
interfaces configured with the smallest ip6hint will be assigned first
- Third key is the assigned interface ip6weight in case of equal prefix
assignment length; interfaces having the highest ip6weight will be
assigned first
- Finally the alphabetical order of the interfaces in case of equal
ip6weight
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
|
|
The veth config code mostly handles the primary interface of a veth pair,
the secondary interface is not explicitly referenced and will be found as
an unrelated interface after the pair has been created.
This doesn't only allow us to keep the veth code simple (and similar to
existing device handlers), but will also avoid complicating handling
unnecessarily in case the secondary interface is moved into another network
namespace.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
|
|
The pid is in $1, not $pid.
Use proper test condition for nonmatching exe warning.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Route proto support is usefull when using route distribution
via a routing daemon.
The route proto parameter can be specified via the route proto
uci config parameter, it can hold a numerical value or the string
values unspec, kernel, boot, static or a string present in
/etc/iproute2/rt_protos.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Commit abf52371db75eb449f12209ca1b7ffaa9d2baa22 adds sendredirects
device config support by defining DEV_OPT_SENDREDIRECTS. Fix definition
overlap of DEV_OPT_SENREDIRECTS with DEV_OPT_LEARNING.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Lots of configurations have triggered various issues in this feature,
any many people don't even need this.
Let's disable it by default until it has become more stable
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Setting /proc/sys/net/ipv4/conf/*/send_redirects is useful if a single
layer-2 domain is shared among routed subnets.
Sending redirects will prevents traffic from taking unnessesary detours
through a gateway in cases where direct connectivity on layer 2 exists.
This is commonly the case if an existing LAN infratructure with dump
switches is used to additionally carry routing protocols like OLSR
which are supported only by some nodes on the network.
It's important to note that the default value for send_redirects
differs for interface types (it's enabled on physical ethernet
interfaces, but disabled e.g. on VLANs) due to olsrd changing
/proc/sys/net/ipv4/conf/default/send_redirects during boot, thus the
default differs also depending e.g. on the way an on-board switch is
integrated on specific boards (as eth0 exists before olsrd is started,
eth0.1 gets created by netifd later on...)
Having a way to explicitely enable or disable send_redirects is
thus desireable also to unify the default behaviour among different,
but seemingly similar devices supported.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
Add a new boolean attribute ip6deprecated to the static protocol which can
be used to mark IPv6 addresses as deprecated (i.e., set the preferred
lifetime to 0). This is useful to configure addresses that may be used for
incoming, but not for outgoing connections unless bound explicitly.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
As the ttl of a gre tunnel was set by default to 64 the gre tunnel
failed to get active if don't fragment was disabled as setting
nopmtudisc and ttl is incompatible.
Fix this by setting the default ttl value after don't fragment
and ttl config values have been parsed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Display the IPv6 address obtained from a prefix assignment
as local-address element in the ubus ipv6-prefix-assignment
list so it's explicitly clear which IPv6 address from the
delegated prefix is assigned to interface.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Use device_find in device_create so it's clear a device lookup
is being done in the device list.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Replace device_get by device_find in netifd_dev_status as device_get
will fail to find the device if it's created via config as an aliased
vlan device in dotted notation (eg @iface.200).
In such case get_vlan_device_chain will figure out the layer3 device
but get_vlan_device will not find the vlan device in the dependency
list of the layer 3 device as it has been created as a dependency of
the aliased device.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
When no MAC address option is given, the MAC address of
bst->primary_port is used to override the bridge device address.
When the config changes and a new MAC address is provided in the config,
bridge_reset_primary needs to stop overriding it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
|
|
In case the keep flag is set in proto_shell_update_link no interface
update event is triggered when IPv4/6 addresses/routes/... are updated
as the proto_event callback is not called due to keep being set.
Unconditionally call the proto_event callback handler in proto_shell_update_link
but let the proto_event callback handler; in this case interface_proto_event_cb,
decide which actions need to be taken dependant on the interface state.
In case the interface is already in the up state trigger an update event
only if the interface updated flag actually indicates either an IP address/
route/data change; before interface update events were actually sent wihtout
any parameter change.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Similar as when updating a vif; call wireless_interface_handle_link removing the vif from
the network when deleting a vif
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
The bridge name is a copy of the device name; but the device name can
change which is the case when an aliased interface is used as bridge member.
This will result into unwanted side effects like bridge reload triggering
a topology change effect after doing network reload; therefore use the
configured ifname as fixed bridge member name.
Also don't display bridge member devices which are hidden
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Adding helpers for virtual interfaces generic options in ncm, qmi, mbim
and directip protocols as suggested by Felix in
https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fixes a race condition as the device can be active again; due to a device_claim; by the logic
behind the set_state device type function. In this case the down event cannot be sent anymore
as it would bring down the interface(s) referencing the device.
This can be the case for an aliased device when the underlying device is switched during a reload;
the alias_set_device function can add a new dependency on the new active device which will put the
aliased device in active mode again as the aliased device is already claimed by the interface
using it.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fixes creation of vlan 8021ad/8021q devices by UCI due to device handlers rework
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fixes creation of tunnel devices by UCI due to device handlers rework
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Fixes creation of macvlan devices by UCI due to device handlers rework
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
While at it; make device_types static if only used in the device type file
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Dropping hotplug event in case of interface reload results into hotplug scripts
not being being run for the interface and thus external actors not being informed
about the actual state of the interface.
This is clearly visible if the interface auto parameter is set to disabled for
multiple interfaces resulting into no hotplug down event for all interfaces.
Therefore don't flush the interface hotplug queue in case an interface reload
event is observed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Interface name servers when being written to resolv.conf.auto are sorted
based on the following parameters:
-Primary sorting key is interface dns_metric; name servers having lowest
interface dns_metric are listed first
-Secondary sorting key is interface metric; in case of equal interface
dns_metric name servers having lowest interface metric are listed first
-Finally alphabetical order of the interface names in case of equal
interface dns_metric and metric
In case the resolver queries the multiple servers in the order
listed; sorting is usefull in the following scenarios :
-Name resolving over a main and backup interface
-Assign priority to IPv6 name servers over IPv4 or vice versa
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Setting the multicast_fast_leave option of a bridge allows to control
the forwarding of multicast traffic when an IGMP/MLD leave is received.
In case multicast_leave_option is enabled and a leave is received the
multicast membership will immediately be dropped on the bridge port while
in the other case the multicast membership will time out in the bridge.
This could be usefull in scenarios where explicit multicast membership
host tracking is not supported in the upstream network. In this case the
multicast stream is still flowing after a leave is received resulting into
possible bandwidth saturation on the lan if a new stream is joined as
multiple multicast streams are received.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
Device handlers now also declare if they have bridge capabilities and include
a string to prefix device names for their types.
Signed-off-by: Arne Kappen <akappen@inet.tu-berlin.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup/fixes]
|
|
- remove const from device handler struct
- pass device handler type to create function
Signed-off-by: Arne Kappen <akappen@inet.tu-berlin.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
|
|
just a cleanup for an unused member.
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com>
|
