msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-10 03:40+0200\n" "PO-Revision-Date: 2012-04-03 08:44+0200\n" "Last-Translator: juhosg \n" "Language-Team: LANGUAGE \n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.4\n" msgid "(%d minute window, %d second interval)" msgstr "(%d minute window, %d second interval)" msgid "(%s available)" msgstr "(%s available)" msgid "(empty)" msgstr "(empty)" msgid "(no interfaces attached)" msgstr "(no interfaces attached)" msgid "-- Additional Field --" msgstr "-- Additional Field --" msgid "-- Please choose --" msgstr "-- Please choose --" msgid "-- custom --" msgstr "-- custom --" msgid "1 Minute Load:" msgstr "1 Minute Load:" msgid "15 Minute Load:" msgstr "15 Minute Load:" msgid "5 Minute Load:" msgstr "5 Minute Load:" msgid "BSSID" msgstr "BSSID" msgid "DNS query port" msgstr "DNS query port" msgid "DNS server port" msgstr "DNS server port" msgid "" "DNS servers will be queried in the " "order of the resolvfile" msgstr "" "DNS servers will be queried in the " "order of the resolvfile" msgid "ESSID" msgstr "ESSID" msgid "IPv4-Address" msgstr "IPv4-Address" msgid "IPv4-Gateway" msgstr "IPv4-Gateway" msgid "IPv4-Netmask" msgstr "IPv4-Netmask" msgid "" "IPv6-Address or Network " "(CIDR)" msgstr "" "IPv6-Address or Network " "(CIDR)" msgid "IPv6-Gateway" msgstr "IPv6-Gateway" msgid "IPv6-Suffix (hex)" msgstr "" msgid "LED Configuration" msgstr "LED Configuration" msgid "LED Name" msgstr "LED Name" msgid "MAC-Address" msgstr "MAC-Address" msgid "" "Max. DHCP leases" msgstr "" "Max. DHCP leases" msgid "" "Max. EDNS0 packet size" msgstr "" "Max. EDNS0 packet size" msgid "Max. concurrent queries" msgstr "Max. concurrent queries" msgid "%s - %s" msgstr "" msgid "ADSL" msgstr "" msgid "ADSL Status" msgstr "" msgid "APN" msgstr "APN" msgid "AR Support" msgstr "AR Support" msgid "ARP retry threshold" msgstr "ARP retry threshold" msgid "ATM Bridges" msgstr "ATM Bridges" msgid "ATM Virtual Channel Identifier (VCI)" msgstr "ATM Virtual Channel Identifier (VCI)" msgid "ATM Virtual Path Identifier (VPI)" msgstr "ATM Virtual Path Identifier (VPI)" msgid "" "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual " "Linux network interfaces which can be used in conjunction with DHCP or PPP " "to dial into the provider network." msgstr "" "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual " "Linux network interfaces which can be used in conjunction with DHCP or PPP " "to dial into the provider network." msgid "ATM device number" msgstr "ATM device number" msgid "Access Concentrator" msgstr "Access Concentrator" msgid "Access Point" msgstr "Access Point" msgid "Action" msgstr "Action" msgid "Actions" msgstr "Actions" msgid "Activate this network" msgstr "Activate this network" msgid "Active IPv4-Routes" msgstr "Active IPv4-Routes" msgid "Active IPv6-Routes" msgstr "Active IPv6-Routes" msgid "Active Connections" msgstr "Active Connections" msgid "Active DHCP Leases" msgstr "" msgid "Active DHCPv6 Leases" msgstr "" msgid "Ad-Hoc" msgstr "Ad-Hoc" msgid "Add" msgstr "Add" msgid "Add local domain suffix to names served from hosts files" msgstr "Add local domain suffix to names served from hosts files" msgid "Add new interface..." msgstr "Add new interface..." msgid "Additional Hosts files" msgstr "Additional Hosts files" msgid "Address" msgstr "Address" msgid "Address to access local relay bridge" msgstr "Address to access local relay bridge" msgid "Administration" msgstr "Administration" msgid "Advanced Settings" msgstr "Advanced Settings" msgid "Alert" msgstr "Alert" msgid "Allow SSH password authentication" msgstr "Allow SSH password authentication" msgid "Allow all except listed" msgstr "Allow all except listed" msgid "Allow listed only" msgstr "Allow listed only" msgid "Allow localhost" msgstr "Allow localhost" msgid "Allow remote hosts to connect to local SSH forwarded ports" msgstr "Allow remote hosts to connect to local SSH forwarded ports" msgid "Allow root logins with password" msgstr "Allow root logins with password" msgid "Allow the root user to login with password" msgstr "Allow the root user to login with password" msgid "" "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services" msgstr "" "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services" msgid "Always announce default router" msgstr "" msgid "" "Always use 40MHz channels even if the secondary channel overlaps. Using this " "option does not comply with IEEE 802.11n-2009!" msgstr "" msgid "An additional network will be created if you leave this unchecked." msgstr "An additional network will be created if you leave this unchecked." msgid "Announce as default router even if no public prefix is available." msgstr "" msgid "Announced DNS domains" msgstr "" msgid "Announced DNS servers" msgstr "" msgid "Antenna 1" msgstr "Antenna 1" msgid "Antenna 2" msgstr "Antenna 2" msgid "Antenna Configuration" msgstr "" msgid "Any zone" msgstr "Any zone" msgid "Apply" msgstr "Apply" msgid "Applying changes" msgstr "Applying changes" msgid "" "Assign a part of given length of every public IPv6-prefix to this interface" msgstr "" msgid "Assign interfaces..." msgstr "Assign interfaces..." msgid "" "Assign prefix parts using this hexadecimal subprefix ID for this interface." msgstr "" msgid "Associated Stations" msgstr "Associated Stations" msgid "Atheros 802.11%s Wireless Controller" msgstr "" msgid "Authentication" msgstr "Authentication" msgid "Authoritative" msgstr "Authoritative" msgid "Authorization Required" msgstr "Authorization Required" msgid "Auto Refresh" msgstr "Auto Refresh" msgid "Automatic" msgstr "" msgid "Automatic Homenet (HNCP)" msgstr "" msgid "Available" msgstr "Available" msgid "Available packages" msgstr "Available packages" msgid "Average:" msgstr "Average:" msgid "BSSID" msgstr "BSSID" msgid "Back" msgstr "Back" msgid "Back to Overview" msgstr "Back to Overview" msgid "Back to configuration" msgstr "Back to configuration" msgid "Back to overview" msgstr "Back to overview" msgid "Back to scan results" msgstr "Back to scan results" msgid "Background Scan" msgstr "Background Scan" msgid "Backup / Flash Firmware" msgstr "Backup / Flash Firmware" msgid "Backup / Restore" msgstr "Backup / Restore" msgid "Backup file list" msgstr "Backup file list" msgid "Bad address specified!" msgstr "Bad address specified!" msgid "Band" msgstr "" msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " "defined backup patterns." msgstr "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " "defined backup patterns." msgid "Bitrate" msgstr "Bitrate" msgid "Bogus NX Domain Override" msgstr "Bogus NX Domain Override" msgid "Bridge" msgstr "Bridge" msgid "Bridge interfaces" msgstr "Bridge interfaces" msgid "Bridge unit number" msgstr "Bridge unit number" msgid "Bring up on boot" msgstr "Bring up on boot" msgid "Broadcom 802.11%s Wireless Controller" msgstr "" msgid "Broadcom BCM%04x 802.11 Wireless Controller" msgstr "" msgid "Buffered" msgstr "Buffered" msgid "Buttons" msgstr "Buttons" msgid "CPU" msgstr "CPU" msgid "CPU usage (%)" msgstr "CPU usage (%)" msgid "Cached" msgstr "Cached" msgid "Cancel" msgstr "Cancel" msgid "Category" msgstr "" msgid "Chain" msgstr "Chain" msgid "Changes" msgstr "Changes" msgid "Changes applied." msgstr "Changes applied." msgid "Changes the administrator password for accessing the device" msgstr "Changes the administrator password for accessing the device" msgid "Channel" msgstr "Channel" msgid "Check" msgstr "Check" msgid "Checksum" msgstr "Checksum" msgid "" "Choose the firewall zone you want to assign to this interface. Select " "unspecified to remove the interface from the associated zone or " "fill out the create field to define a new zone and attach the " "interface to it." msgstr "" "Choose the firewall zone you want to assign to this interface. Select " "unspecified to remove the interface from the associated zone or " "fill out the create field to define a new zone and attach the " "interface to it." msgid "" "Choose the network(s) you want to attach to this wireless interface or fill " "out the create field to define a new network." msgstr "" msgid "Cipher" msgstr "Cipher" msgid "" "Click \"Generate archive\" to download a tar archive of the current " "configuration files. To reset the firmware to its initial state, click " "\"Perform reset\" (only possible with squashfs images)." msgstr "" "Click \"Generate archive\" to download a tar archive of the current " "configuration files. To reset the firmware to its initial state, click " "\"Perform reset\" (only possible with squashfs images)." msgid "Client" msgstr "Client" msgid "Client ID to send when requesting DHCP" msgstr "Client ID to send when requesting DHCP" msgid "" "Close inactive connection after the given amount of seconds, use 0 to " "persist connection" msgstr "" "Close inactive connection after the given amount of seconds, use 0 to " "persist connection" msgid "Close list..." msgstr "Close list..." msgid "Collecting data..." msgstr "Collecting data..." msgid "Command" msgstr "Command" msgid "Common Configuration" msgstr "Common Configuration" msgid "Compression" msgstr "Compression" msgid "Configuration" msgstr "Configuration" msgid "Configuration applied." msgstr "Configuration applied." msgid "Configuration files will be kept." msgstr "Configuration files will be kept." msgid "Configures this mount as overlay storage for block-extroot" msgstr "Configures this mount as overlay storage for block-extroot" msgid "Confirmation" msgstr "Confirmation" msgid "Connect" msgstr "Connect" msgid "Connected" msgstr "Connected" msgid "Connection Limit" msgstr "Connection Limit" msgid "Connections" msgstr "Connections" msgid "Country" msgstr "Country" msgid "Country Code" msgstr "Country Code" msgid "Cover the following interface" msgstr "Cover the following interface" msgid "Cover the following interfaces" msgstr "Cover the following interfaces" msgid "Create / Assign firewall-zone" msgstr "Create / Assign firewall-zone" msgid "Create Interface" msgstr "Create Interface" msgid "Create a bridge over multiple interfaces" msgstr "Create a bridge over multiple interfaces" msgid "Critical" msgstr "Critical" msgid "Cron Log Level" msgstr "Cron Log Level" msgid "Custom Interface" msgstr "Custom Interface" msgid "Custom delegated IPv6-prefix" msgstr "" msgid "" "Customizes the behaviour of the device LEDs if possible." msgstr "" "Customizes the behaviour of the device LEDs if possible." msgid "DHCP Leases" msgstr "DHCP Leases" msgid "DHCP Server" msgstr "DHCP Server" msgid "DHCP and DNS" msgstr "DHCP and DNS" msgid "DHCP client" msgstr "DHCP client" msgid "DHCP-Options" msgstr "DHCP-Options" msgid "DHCPv6 Leases" msgstr "" msgid "DHCPv6 client" msgstr "" msgid "DHCPv6-Mode" msgstr "" msgid "DHCPv6-Service" msgstr "" msgid "DNS" msgstr "DNS" msgid "DNS forwardings" msgstr "DNS forwardings" msgid "DNS-Label / FQDN" msgstr "" msgid "DS-Lite AFTR address" msgstr "" msgid "DUID" msgstr "" msgid "Debug" msgstr "Debug" msgid "Default %d" msgstr "Default %d" msgid "Default gateway" msgstr "Default gateway" msgid "Default state" msgstr "Default state" msgid "Define a name for this network." msgstr "Define a name for this network." msgid "" "Define additional DHCP options, for example " "\"6,192.168.2.1,192.168.2.2\" which advertises different DNS " "servers to clients." msgstr "" "Define additional DHCP options, for example " "\"6,192.168.2.1,192.168.2.2\" which advertises different DNS " "servers to clients." msgid "Delete" msgstr "Delete" msgid "Delete this interface" msgstr "Delete this interface" msgid "Delete this network" msgstr "Delete this network" msgid "Description" msgstr "Description" msgid "Design" msgstr "Design" msgid "Destination" msgstr "Destination" msgid "Device" msgstr "Device" msgid "Device Configuration" msgstr "Device Configuration" msgid "Diagnostics" msgstr "Diagnostics" msgid "Directory" msgstr "Directory" msgid "Disable" msgstr "" msgid "" "Disable DHCP for " "this interface." msgstr "" msgid "Disable DNS setup" msgstr "" msgid "Disable HW-Beacon timer" msgstr "Disable HW-Beacon timer" msgid "Disabled" msgstr "Disabled" msgid "Discard upstream RFC1918 responses" msgstr "" msgid "Displaying only packages containing" msgstr "" msgid "Distance Optimization" msgstr "Distance Optimization" msgid "Distance to farthest network member in meters." msgstr "Distance to farthest network member in meters." msgid "Diversity" msgstr "Diversity" msgid "" "Dnsmasq is a combined DHCP-Server and DNS-" "Forwarder for NAT " "firewalls" msgstr "" "Dnsmasq is a combined DHCP-Server and DNS-" "Forwarder for NAT " "firewalls" msgid "Do not cache negative replies, e.g. for not existing domains" msgstr "" msgid "Do not forward requests that cannot be answered by public name servers" msgstr "" msgid "Do not forward reverse lookups for local networks" msgstr "" msgid "Do not send probe responses" msgstr "Do not send probe responses" msgid "Domain required" msgstr "Domain required" msgid "Domain whitelist" msgstr "" msgid "" "Don't forward DNS-Requests without " "DNS-Name" msgstr "" "Don't forward DNS-Requests " "without DNS-Name" msgid "Download and install package" msgstr "Download and install package" msgid "Download backup" msgstr "" msgid "Dropbear Instance" msgstr "" msgid "" "Dropbear offers SSH network shell access " "and an integrated SCP server" msgstr "" "Dropbear offers SSH network shell access " "and an integrated SCP server" msgid "Dual-Stack Lite (RFC6333)" msgstr "" msgid "Dynamic DHCP" msgstr "" "Dynamic DHCP" msgid "Dynamic tunnel" msgstr "" msgid "" "Dynamically allocate DHCP addresses for clients. If disabled, only clients " "having static leases will be served." msgstr "" msgid "EAP-Method" msgstr "EAP-Method" msgid "Edit" msgstr "Edit" msgid "Edit this interface" msgstr "" msgid "Edit this network" msgstr "" msgid "Emergency" msgstr "" msgid "Enable" msgstr "" msgid "Enable STP" msgstr "Enable STP" msgid "Enable HE.net dynamic endpoint update" msgstr "" msgid "Enable IPv6 negotiation on the PPP link" msgstr "" msgid "Enable Jumbo Frame passthrough" msgstr "" msgid "Enable NTP client" msgstr "" msgid "Enable TFTP server" msgstr "" msgid "Enable VLAN functionality" msgstr "" msgid "Enable learning and aging" msgstr "" msgid "Enable this mount" msgstr "" msgid "Enable this swap" msgstr "" msgid "Enable/Disable" msgstr "Enable/Disable" msgid "Enabled" msgstr "Enabled" msgid "Enables the Spanning Tree Protocol on this bridge" msgstr "Enables the Spanning Tree Protocol on this bridge" msgid "Encapsulation mode" msgstr "" msgid "Encryption" msgstr "Encryption" msgid "Erasing..." msgstr "" msgid "Error" msgstr "Error" msgid "Ethernet Adapter" msgstr "Ethernet Adapter" msgid "Ethernet Switch" msgstr "Ethernet Switch" msgid "Expand hosts" msgstr "" msgid "Expires" msgstr "" msgid "" "Expiry time of leased addresses, minimum is 2 Minutes (2m)." msgstr "" msgid "External" msgstr "" msgid "External system log server" msgstr "" msgid "External system log server port" msgstr "" msgid "Fast Frames" msgstr "Fast Frames" msgid "File" msgstr "" msgid "Filename of the boot image advertised to clients" msgstr "" msgid "Filesystem" msgstr "Filesystem" msgid "Filter" msgstr "Filter" msgid "Filter private" msgstr "Filter private" msgid "Filter useless" msgstr "Filter useless" msgid "Find and join network" msgstr "" msgid "Find package" msgstr "Find package" msgid "Finish" msgstr "" msgid "Firewall" msgstr "Firewall" msgid "Firewall Settings" msgstr "Firewall Settings" msgid "Firewall Status" msgstr "Firewall Status" msgid "Firmware Version" msgstr "" msgid "Fixed source port for outbound DNS queries" msgstr "" msgid "Flags" msgstr "Flags" msgid "Flash Firmware" msgstr "Flash Firmware" msgid "Flash image..." msgstr "" msgid "Flash new firmware image" msgstr "" msgid "Flash operations" msgstr "" msgid "Flashing..." msgstr "" msgid "Force" msgstr "Force" msgid "Force 40MHz mode" msgstr "" msgid "Force CCMP (AES)" msgstr "" msgid "Force DHCP on this network even if another server is detected." msgstr "" msgid "Force TKIP" msgstr "" msgid "Force TKIP and CCMP (AES)" msgstr "" msgid "Forward DHCP traffic" msgstr "" msgid "Forward broadcast traffic" msgstr "" msgid "Forwarding mode" msgstr "" msgid "Fragmentation Threshold" msgstr "Fragmentation Threshold" msgid "Frame Bursting" msgstr "Frame Bursting" msgid "Free" msgstr "" msgid "Free space" msgstr "" msgid "Frequency Hopping" msgstr "Frequency Hopping" msgid "GHz" msgstr "" msgid "GPRS only" msgstr "" msgid "Gateway" msgstr "" msgid "Gateway ports" msgstr "" msgid "General Settings" msgstr "" msgid "General Setup" msgstr "General Setup" msgid "Generate archive" msgstr "" msgid "Generic 802.11%s Wireless Controller" msgstr "" msgid "Given password confirmation did not match, password not changed!" msgstr "" msgid "Global network options" msgstr "" msgid "Go to password configuration..." msgstr "" msgid "Go to relevant configuration page" msgstr "Go to relevant configuration page" msgid "Guest" msgstr "" msgid "HE.net password" msgstr "" msgid "HE.net username" msgstr "" msgid "HT mode (802.11n)" msgstr "" msgid "Handler" msgstr "Handler" msgid "Hang Up" msgstr "Hang Up" msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." msgstr "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." msgid "" "Here you can paste public SSH-Keys (one per line) for SSH public-key " "authentication." msgstr "" msgid "Hermes 802.11b Wireless Controller" msgstr "" msgid "Hide ESSID" msgstr "Hide ESSID" msgid "Host entries" msgstr "Host entries" msgid "Host expiry timeout" msgstr "" msgid "Host-IP or Network" msgstr "Host-IP or Network" msgid "Hostname" msgstr "Hostname" msgid "Hostname to send when requesting DHCP" msgstr "" msgid "Hostnames" msgstr "Hostnames" msgid "IP address" msgstr "IP address" msgid "IPv4" msgstr "" msgid "IPv4 Firewall" msgstr "" msgid "IPv4 WAN Status" msgstr "" msgid "IPv4 address" msgstr "" msgid "IPv4 and IPv6" msgstr "" msgid "IPv4 assignment length" msgstr "" msgid "IPv4 broadcast" msgstr "" msgid "IPv4 gateway" msgstr "" msgid "IPv4 netmask" msgstr "" msgid "IPv4 only" msgstr "" msgid "IPv4 prefix length" msgstr "" msgid "IPv4-Address" msgstr "" msgid "IPv6" msgstr "IPv6" msgid "IPv6 Firewall" msgstr "" msgid "IPv6 Settings" msgstr "" msgid "IPv6 ULA-Prefix" msgstr "" msgid "IPv6 WAN Status" msgstr "" msgid "IPv6 address" msgstr "" msgid "IPv6 assignment hint" msgstr "" msgid "IPv6 assignment length" msgstr "" msgid "IPv6 gateway" msgstr "" msgid "IPv6 only" msgstr "" msgid "IPv6 prefix" msgstr "" msgid "IPv6 prefix length" msgstr "" msgid "IPv6 routed prefix" msgstr "" msgid "IPv6-Address" msgstr "" msgid "IPv6-in-IPv4 (RFC4213)" msgstr "" msgid "IPv6-over-IPv4 (6rd)" msgstr "" msgid "IPv6-over-IPv4 (6to4)" msgstr "" msgid "Identity" msgstr "Identity" msgid "" "If specified, mount the device by its UUID instead of a fixed device node" msgstr "" msgid "" "If specified, mount the device by the partition label instead of a fixed " "device node" msgstr "" msgid "If unchecked, no default route is configured" msgstr "" msgid "If unchecked, the advertised DNS server addresses are ignored" msgstr "" msgid "" "If your physical memory is insufficient unused data can be temporarily " "swapped to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very " "slow process as the swap-device cannot be accessed with the high datarates " "of the RAM." msgstr "" "If your physical memory is insufficient unused data can be temporarily " "swapped to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very " "slow process as the swap-device cannot be accessed with the high datarates " "of the RAM." msgid "Ignore Hosts files" msgstr "" msgid "Ignore interface" msgstr "Ignore interface" msgid "Ignore resolve file" msgstr "Ignore resolve file" msgid "Image" msgstr "" msgid "In" msgstr "In" msgid "Inactivity timeout" msgstr "" msgid "Inbound:" msgstr "" msgid "Info" msgstr "" msgid "Initscript" msgstr "Initscript" msgid "Initscripts" msgstr "Initscripts" msgid "Install" msgstr "Install" msgid "Install iputils-traceroute6 for IPv6 traceroute" msgstr "" msgid "Install package %q" msgstr "" msgid "Install protocol extensions..." msgstr "" msgid "Installed packages" msgstr "" msgid "Interface" msgstr "Interface" msgid "Interface Configuration" msgstr "" msgid "Interface Overview" msgstr "" msgid "Interface is reconnecting..." msgstr "" msgid "Interface is shutting down..." msgstr "" msgid "Interface not present or not connected yet." msgstr "" msgid "Interface reconnected" msgstr "" msgid "Interface shut down" msgstr "" msgid "Interfaces" msgstr "Interfaces" msgid "Internal Server Error" msgstr "" msgid "Invalid" msgstr "Invalid input value" msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed." msgstr "" msgid "Invalid VLAN ID given! Only unique IDs are allowed" msgstr "" msgid "Invalid username and/or password! Please try again." msgstr "Invalid username and/or password! Please try again." msgid "" "It appears that you try to flash an image that does not fit into the flash " "memory, please verify the image file!" msgstr "" "It appears that you try to flash an image that does not fit into the flash " "memory, please verify the image file!" msgid "Java Script required!" msgstr "" msgid "Join Network" msgstr "Join Network" msgid "Join Network: Settings" msgstr "" msgid "Join Network: Wireless Scan" msgstr "" msgid "Keep settings" msgstr "" msgid "Kernel Log" msgstr "Kernel Log" msgid "Kernel Version" msgstr "" msgid "Key" msgstr "Key" msgid "Key #%d" msgstr "" msgid "Kill" msgstr "Kill" msgid "L2TP" msgstr "" msgid "L2TP Server" msgstr "" msgid "LCP echo failure threshold" msgstr "" msgid "LCP echo interval" msgstr "" msgid "LLC" msgstr "" msgid "Label" msgstr "" msgid "Language" msgstr "Language" msgid "Language and Style" msgstr "" msgid "Lease validity time" msgstr "" msgid "Leasefile" msgstr "Leasefile" msgid "Leasetime" msgstr "Leasetime" msgid "Leasetime remaining" msgstr "Leasetime remaining" msgid "Leave empty to autodetect" msgstr "" msgid "Leave empty to use the current WAN address" msgstr "" msgid "Legend:" msgstr "" msgid "Limit" msgstr "Limit" msgid "Line Attenuation" msgstr "" msgid "Line Speed" msgstr "" msgid "Line State" msgstr "" msgid "Link On" msgstr "Link On" msgid "" "List of DNS servers to forward " "requests to" msgstr "" msgid "List of domains to allow RFC1918 responses for" msgstr "" msgid "List of hosts that supply bogus NX domain results" msgstr "" msgid "Listen only on the given interface or, if unspecified, on all" msgstr "" msgid "Listening port for inbound DNS queries" msgstr "" msgid "Load" msgstr "Load" msgid "Load Average" msgstr "" msgid "Loading" msgstr "" msgid "Local IPv4 address" msgstr "" msgid "Local IPv6 address" msgstr "" msgid "Local Startup" msgstr "" msgid "Local Time" msgstr "Local Time" msgid "Local domain" msgstr "" msgid "" "Local domain specification. Names matching this domain are never forwared " "and resolved from DHCP or hosts files only" msgstr "" msgid "Local domain suffix appended to DHCP names and hosts file entries" msgstr "" msgid "Local server" msgstr "" msgid "" "Localise hostname depending on the requesting subnet if multiple IPs are " "available" msgstr "" msgid "Localise queries" msgstr "Localise queries" msgid "Locked to channel %d used by %s" msgstr "" msgid "Log output level" msgstr "" msgid "Log queries" msgstr "Log queries" msgid "Logging" msgstr "" msgid "Login" msgstr "Login" msgid "Logout" msgstr "Logout" msgid "Lowest leased address as offset from the network address." msgstr "" msgid "MAC-Address" msgstr "" msgid "MAC-Address Filter" msgstr "MAC-Address Filter" msgid "MAC-Filter" msgstr "MAC-Filter" msgid "MAC-List" msgstr "MAC-List" msgid "MB/s" msgstr "" msgid "MHz" msgstr "" msgid "MTU" msgstr "" msgid "Maximum Rate" msgstr "Maximum Rate" msgid "Maximum allowed number of active DHCP leases" msgstr "" msgid "Maximum allowed number of concurrent DNS queries" msgstr "" msgid "Maximum allowed size of EDNS.0 UDP packets" msgstr "" msgid "Maximum amount of seconds to wait for the modem to become ready" msgstr "" msgid "Maximum hold time" msgstr "Maximum hold time" msgid "Maximum number of leased addresses." msgstr "" msgid "Mbit/s" msgstr "" msgid "Memory" msgstr "Memory" msgid "Memory usage (%)" msgstr "Memory usage (%)" msgid "Metric" msgstr "Metric" msgid "Minimum Rate" msgstr "Minimum Rate" msgid "Minimum hold time" msgstr "Minimum hold time" msgid "Missing protocol extension for proto %q" msgstr "" msgid "Mode" msgstr "Mode" msgid "Model" msgstr "" msgid "Modem device" msgstr "Modem device" msgid "Modem init timeout" msgstr "" msgid "Monitor" msgstr "Monitor" msgid "Mount Entry" msgstr "" msgid "Mount Point" msgstr "Mount Point" msgid "Mount Points" msgstr "Mount Points" msgid "Mount Points - Mount Entry" msgstr "" msgid "Mount Points - Swap Entry" msgstr "" msgid "" "Mount Points define at which point a memory device will be attached to the " "filesystem" msgstr "" "Mount Points define at which point a memory device will be attached to the " "filesystem" msgid "Mount options" msgstr "" msgid "Mount point" msgstr "" msgid "Mounted file systems" msgstr "Mounted file systems" msgid "Move down" msgstr "" msgid "Move up" msgstr "" msgid "Multicast Rate" msgstr "Multicast Rate" msgid "Multicast address" msgstr "" msgid "NAS ID" msgstr "NAS ID" msgid "NDP-Proxy" msgstr "" msgid "NTP server candidates" msgstr "" msgid "Name" msgstr "Name" msgid "Name of the new interface" msgstr "" msgid "Name of the new network" msgstr "Name of the new network" msgid "Navigation" msgstr "Navigation" msgid "Netmask" msgstr "" msgid "Network" msgstr "Network" msgid "Network Utilities" msgstr "" msgid "Network boot image" msgstr "" msgid "Network without interfaces." msgstr "" msgid "Next »" msgstr "" msgid "No DHCP Server configured for this interface" msgstr "" msgid "No chains in this table" msgstr "No chains in this table" msgid "No files found" msgstr "" msgid "No information available" msgstr "" msgid "No negative cache" msgstr "" msgid "No network configured on this device" msgstr "" msgid "No network name specified" msgstr "" msgid "No package lists available" msgstr "" msgid "No password set!" msgstr "" msgid "No rules in this chain" msgstr "No rules in this chain" msgid "No zone assigned" msgstr "" msgid "Noise" msgstr "Noise" msgid "Noise Margin" msgstr "" msgid "Noise:" msgstr "" msgid "None" msgstr "" msgid "Normal" msgstr "" msgid "Not Found" msgstr "" msgid "Not associated" msgstr "" msgid "Not connected" msgstr "" msgid "Note: Configuration files will be erased." msgstr "" msgid "Notice" msgstr "" msgid "Nslookup" msgstr "" msgid "OK" msgstr "OK" msgid "OPKG-Configuration" msgstr "OPKG-Configuration" msgid "Off-State Delay" msgstr "" msgid "" "On this page you can configure the network interfaces. You can bridge " "several interfaces by ticking the \"bridge interfaces\" field and enter the " "names of several network interfaces separated by spaces. You can also use " "VLAN notation " "INTERFACE.VLANNR (e.g.: " "eth0.1)." msgstr "" "On this page you can configure the network interfaces. You can bridge " "several interfaces by ticking the \"bridge interfaces\" field and enter the " "names of several network interfaces separated by spaces. You can also use " "VLAN notation " "INTERFACE.VLANNR (e.g.: " "eth0.1)." msgid "On-State Delay" msgstr "" msgid "One of hostname or mac address must be specified!" msgstr "" msgid "One or more fields contain invalid values!" msgstr "" msgid "One or more required fields have no value!" msgstr "" msgid "Open list..." msgstr "" msgid "Option changed" msgstr "" msgid "Option removed" msgstr "" msgid "Options" msgstr "Options" msgid "Other:" msgstr "" msgid "Out" msgstr "Out" msgid "Outbound:" msgstr "" msgid "Outdoor Channels" msgstr "Outdoor Channels" msgid "Override MAC address" msgstr "" msgid "Override MTU" msgstr "" msgid "Override the gateway in DHCP responses" msgstr "" msgid "" "Override the netmask sent to clients. Normally it is calculated from the " "subnet that is served." msgstr "" msgid "Override the table used for internal routes" msgstr "" msgid "Overview" msgstr "Overview" msgid "Owner" msgstr "Owner" msgid "PAP/CHAP password" msgstr "" msgid "PAP/CHAP username" msgstr "" msgid "PID" msgstr "PID" msgid "PIN" msgstr "" msgid "PPP" msgstr "" msgid "PPPoA Encapsulation" msgstr "PPPoA Encapsulation" msgid "PPPoATM" msgstr "" msgid "PPPoE" msgstr "" msgid "PPtP" msgstr "" msgid "Package libiwinfo required!" msgstr "" msgid "Package lists are older than 24 hours" msgstr "" msgid "Package name" msgstr "Package name" msgid "Packets" msgstr "Packets" msgid "Part of zone %q" msgstr "" msgid "Password" msgstr "Password" msgid "Password authentication" msgstr "Password authentication" msgid "Password of Private Key" msgstr "Password of Private Key" msgid "Password successfully changed!" msgstr "" msgid "Path to CA-Certificate" msgstr "Path to CA-Certificate" msgid "Path to Client-Certificate" msgstr "" msgid "Path to Private Key" msgstr "Path to Private Key" msgid "Path to executable which handles the button event" msgstr "" msgid "Peak:" msgstr "" msgid "Perform reboot" msgstr "Perform reboot" msgid "Perform reset" msgstr "" msgid "Phy Rate:" msgstr "" msgid "Physical Settings" msgstr "Physical Settings" msgid "Ping" msgstr "" msgid "Pkts." msgstr "Pkts." msgid "Please enter your username and password." msgstr "Please enter your username and password." msgid "Please wait: Device rebooting..." msgstr "Please wait: Device rebooting..." msgid "Policy" msgstr "Policy" msgid "Port" msgstr "Port" msgid "Port %d" msgstr "" msgid "Port %d is untagged in multiple VLANs!" msgstr "" msgid "Port status:" msgstr "" msgid "" "Presume peer to be dead after given amount of LCP echo failures, use 0 to " "ignore failures" msgstr "" msgid "Prevents client-to-client communication" msgstr "Prevents client-to-client communication" msgid "Prism2/2.5/3 802.11b Wireless Controller" msgstr "" msgid "Proceed" msgstr "Proceed" msgid "Processes" msgstr "Processes" msgid "Prot." msgstr "Prot." msgid "Protocol" msgstr "Protocol" msgid "Protocol family" msgstr "" msgid "Protocol of the new interface" msgstr "" msgid "Protocol support is not installed" msgstr "" msgid "Provide NTP server" msgstr "" msgid "Provide new network" msgstr "" msgid "Pseudo Ad-Hoc (ahdemo)" msgstr "Pseudo Ad-Hoc (ahdemo)" msgid "Public prefix routed to this device for distribution to clients." msgstr "" msgid "Quality" msgstr "" msgid "RTS/CTS Threshold" msgstr "RTS/CTS Threshold" msgid "RX" msgstr "RX" msgid "RX Rate" msgstr "" msgid "RaLink 802.11%s Wireless Controller" msgstr "" msgid "Radius-Accounting-Port" msgstr "" msgid "Radius-Accounting-Secret" msgstr "" msgid "Radius-Accounting-Server" msgstr "" msgid "Radius-Authentication-Port" msgstr "" msgid "Radius-Authentication-Secret" msgstr "" msgid "Radius-Authentication-Server" msgstr "" msgid "" "Read /etc/ethers to configure the DHCP-Server" msgstr "" "Read /etc/ethers to configure the DHCP-Server" msgid "" "Really delete this interface? The deletion cannot be undone!\\nYou might " "lose access to this device if you are connected via this interface." msgstr "" msgid "" "Really delete this wireless network? The deletion cannot be undone!\\nYou " "might lose access to this device if you are connected via this network." msgstr "" msgid "Really reset all changes?" msgstr "" msgid "" "Really shutdown interface \"%s\" ?\\nYou might lose access to this device if " "you are connected via this interface." msgstr "" msgid "" "Really shutdown network ?\\nYou might lose access to this device if you are " "connected via this interface." msgstr "" msgid "Really switch protocol?" msgstr "" msgid "Realtime Connections" msgstr "" msgid "Realtime Graphs" msgstr "" msgid "Realtime Load" msgstr "" msgid "Realtime Traffic" msgstr "" msgid "Realtime Wireless" msgstr "" msgid "Rebind protection" msgstr "" msgid "Reboot" msgstr "Reboot" msgid "Rebooting..." msgstr "" msgid "Reboots the operating system of your device" msgstr "Reboots the operating system of your device" msgid "Receive" msgstr "Receive" msgid "Receiver Antenna" msgstr "Receiver Antenna" msgid "Reconnect this interface" msgstr "" msgid "Reconnecting interface" msgstr "" msgid "References" msgstr "References" msgid "Regulatory Domain" msgstr "Regulatory Domain" msgid "Relay" msgstr "" msgid "Relay Bridge" msgstr "" msgid "Relay between networks" msgstr "" msgid "Relay bridge" msgstr "" msgid "Remote IPv4 address" msgstr "" msgid "Remove" msgstr "Remove" msgid "Repeat scan" msgstr "Repeat scan" msgid "Replace entry" msgstr "Replace entry" msgid "Replace wireless configuration" msgstr "" msgid "Request IPv6-address" msgstr "" msgid "Request IPv6-prefix of length" msgstr "" msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3" msgstr "" msgid "Reset" msgstr "Reset" msgid "Reset Counters" msgstr "Reset Counters" msgid "Reset to defaults" msgstr "" msgid "Resolv and Hosts Files" msgstr "" msgid "Resolve file" msgstr "" msgid "Restart" msgstr "Restart" msgid "Restart Firewall" msgstr "Restart Firewall" msgid "Restore backup" msgstr "Restore backup" msgid "Reveal/hide password" msgstr "" msgid "Revert" msgstr "Revert" msgid "Root" msgstr "" msgid "Root directory for files served via TFTP" msgstr "" msgid "Router Advertisement-Service" msgstr "" msgid "Router Password" msgstr "" msgid "Routes" msgstr "Routes" msgid "" "Routes specify over which interface and gateway a certain host or network " "can be reached." msgstr "" "Routes specify over which interface and gateway a certain host or network " "can be reached." msgid "Rule #" msgstr "Rule #" msgid "Run a filesystem check before mounting the device" msgstr "" msgid "Run filesystem check" msgstr "" msgid "SSH Access" msgstr "" msgid "SSH-Keys" msgstr "" msgid "SSID" msgstr "SSID" msgid "Save" msgstr "Save" msgid "Save & Apply" msgstr "Save & Apply" msgid "Save & Apply" msgstr "" msgid "Scan" msgstr "Scan" msgid "Scheduled Tasks" msgstr "Scheduled Tasks" msgid "Section added" msgstr "" msgid "Section removed" msgstr "" msgid "See \"mount\" manpage for details" msgstr "" msgid "" "Send LCP echo requests at the given interval in seconds, only effective in " "conjunction with failure threshold" msgstr "" msgid "Separate Clients" msgstr "Separate Clients" msgid "Separate WDS" msgstr "Separate WDS" msgid "Server Settings" msgstr "" msgid "Service Name" msgstr "" msgid "Service Type" msgstr "" msgid "Services" msgstr "Services" msgid "Setup DHCP Server" msgstr "" msgid "Setup Time Synchronization" msgstr "" msgid "Show current backup file list" msgstr "" msgid "Shutdown this interface" msgstr "" msgid "Shutdown this network" msgstr "" msgid "Signal" msgstr "Signal" msgid "Signal:" msgstr "" msgid "Size" msgstr "Size" msgid "Skip" msgstr "Skip" msgid "Skip to content" msgstr "Skip to content" msgid "Skip to navigation" msgstr "Skip to navigation" msgid "Slot time" msgstr "Slot time" msgid "Software" msgstr "Software" msgid "Some fields are invalid, cannot save values!" msgstr "" msgid "Sorry, the object you requested was not found." msgstr "" msgid "Sorry, the server encountered an unexpected error." msgstr "" msgid "" "Sorry, there is no sysupgrade support present, a new firmware image must be " "flashed manually. Please refer to the OpenWrt wiki for device specific " "install instructions." msgstr "" msgid "Sort" msgstr "" msgid "Source" msgstr "Source" msgid "Specifies the button state to handle" msgstr "Specifies the button state to handle" msgid "Specifies the directory the device is attached to" msgstr "" msgid "Specifies the listening port of this Dropbear instance" msgstr "" msgid "" "Specifies the maximum amount of failed ARP requests until hosts are presumed " "to be dead" msgstr "" msgid "" "Specifies the maximum amount of seconds after which hosts are presumed to be " "dead" msgstr "" msgid "Specify the secret encryption key here." msgstr "" msgid "Start" msgstr "Start" msgid "Start priority" msgstr "Start priority" msgid "Startup" msgstr "" msgid "Static IPv4 Routes" msgstr "Static IPv4 Routes" msgid "Static IPv6 Routes" msgstr "Static IPv6 Routes" msgid "Static Leases" msgstr "Static Leases" msgid "Static Routes" msgstr "Static Routes" msgid "Static WDS" msgstr "" msgid "Static address" msgstr "" msgid "" "Static leases are used to assign fixed IP addresses and symbolic hostnames " "to DHCP clients. They are also required for non-dynamic interface " "configurations where only hosts with a corresponding lease are served." msgstr "" msgid "Status" msgstr "Status" msgid "Stop" msgstr "Stop" msgid "Strict order" msgstr "Strict order" msgid "Submit" msgstr "Submit" msgid "Swap" msgstr "" msgid "Swap Entry" msgstr "" msgid "Switch" msgstr "Switch" msgid "Switch %q" msgstr "" msgid "Switch %q (%s)" msgstr "" msgid "Switch protocol" msgstr "" msgid "Sync with browser" msgstr "" msgid "Synchronizing..." msgstr "" msgid "System" msgstr "System" msgid "System Log" msgstr "System Log" msgid "System Properties" msgstr "" msgid "System log buffer size" msgstr "" msgid "TCP:" msgstr "" msgid "TFTP Settings" msgstr "" msgid "TFTP server root" msgstr "" msgid "TX" msgstr "TX" msgid "TX Rate" msgstr "" msgid "Table" msgstr "Table" msgid "Target" msgstr "Target" msgid "Terminate" msgstr "Terminate" msgid "" "The Device Configuration section covers physical settings of the " "radio hardware such as channel, transmit power or antenna selection which is " "shared among all defined wireless networks (if the radio hardware is multi-" "SSID capable). Per network settings like encryption or operation mode are " "grouped in the Interface Configuration." msgstr "" msgid "" "The libiwinfo-lua package is not installed. You must install this " "component for working wireless configuration!" msgstr "" msgid "" "The HE.net endpoint update configuration changed, you must now use the plain " "username instead of the user ID!" msgstr "" msgid "" "The IPv6 prefix assigned to the provider, usually ends with ::" msgstr "" msgid "" "The allowed characters are: A-Z, a-z, 0-9 and _" msgstr "" msgid "" "The device file of the memory or partition (e.g." " /dev/sda1)" msgstr "" "The device file of the memory or partition (e.g." " /dev/sda1)" msgid "" "The filesystem that was used to format the memory (e.g. ext3)" msgstr "" "The filesystem that was used to format the memory (e.g. ext3)" msgid "" "The flash image was uploaded. Below is the checksum and file size listed, " "compare them with the original file to ensure data integrity.
Click " "\"Proceed\" below to start the flash procedure." msgstr "" msgid "The following changes have been committed" msgstr "" msgid "The following changes have been reverted" msgstr "The following changes have been reverted" msgid "The following rules are currently active on this system." msgstr "The following rules are currently active on this system." msgid "The given network name is not unique" msgstr "" msgid "" "The hardware is not multi-SSID capable and existing configuration will be " "replaced if you proceed." msgstr "" msgid "" "The length of the IPv4 prefix in bits, the remainder is used in the IPv6 " "addresses." msgstr "" msgid "The length of the IPv6 prefix in bits" msgstr "" msgid "" "The network ports on this device can be combined to several VLANs in which computers can " "communicate directly with each other. VLANs are often used to separate different network " "segments. Often there is by default one Uplink port for a connection to the " "next greater network like the internet and other ports for a local network." msgstr "" msgid "The selected protocol needs a device assigned" msgstr "" msgid "" "The system is erasing the configuration partition now and will reboot itself " "when finished." msgstr "" msgid "" "The system is flashing now.
DO NOT POWER OFF THE DEVICE!
Wait a " "few minutes until you try to reconnect. It might be necessary to renew the " "address of your computer to reach the device again, depending on your " "settings." msgstr "" "The system is flashing now.
DO NOT POWER OFF THE DEVICE!
Wait a " "few minutes until you try to reconnect. It might be necessary to renew the " "address of your computer to reach the device again, depending on your " "settings." msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgid "There are no active leases." msgstr "" msgid "There are no pending changes to apply!" msgstr "" msgid "There are no pending changes to revert!" msgstr "" msgid "There are no pending changes!" msgstr "" msgid "" "There is no device assigned yet, please attach a network device in the " "\"Physical Settings\" tab" msgstr "" msgid "" "There is no password set on this router. Please configure a root password to " "protect the web interface and enable SSH." msgstr "" msgid "This IPv4 address of the relay" msgstr "" msgid "" "This is a list of shell glob patterns for matching files and directories to " "include during sysupgrade. Modified files in /etc/config/ and certain other " "configurations are automatically preserved." msgstr "" msgid "" "This is either the \"Update Key\" configured for the tunnel or the account " "password if no update key has been configured" msgstr "" msgid "" "This is the content of /etc/rc.local. Insert your own commands here (in " "front of 'exit 0') to execute them at the end of the boot process." msgstr "" msgid "" "This is the local endpoint address assigned by the tunnel broker, it usually " "ends with :2" msgstr "" msgid "" "This is the only DHCP in the local network" msgstr "" "This is the only DHCP in the local network" msgid "This is the plain username for logging into the account" msgstr "" msgid "" "This is the prefix routed to you by the tunnel broker for use by clients" msgstr "" msgid "This is the system crontab in which scheduled tasks can be defined." msgstr "This is the system crontab in which scheduled tasks can be defined." msgid "" "This is usually the address of the nearest PoP operated by the tunnel broker" msgstr "" msgid "" "This list gives an overview over currently running system processes and " "their status." msgstr "" "This list gives an overview over currently running system processes and " "their status." msgid "This page allows the configuration of custom button actions" msgstr "" msgid "This page gives an overview over currently active network connections." msgstr "This page gives an overview over currently active network connections." msgid "This section contains no values yet" msgstr "This section contains no values yet" msgid "Time Synchronization" msgstr "" msgid "Time Synchronization is not configured yet." msgstr "" msgid "Timezone" msgstr "Timezone" msgid "" "To restore configuration files, you can upload a previously generated backup " "archive here." msgstr "" msgid "Total Available" msgstr "" msgid "Traceroute" msgstr "" msgid "Traffic" msgstr "Traffic" msgid "Transfer" msgstr "Transfer" msgid "Transmission Rate" msgstr "Transmission Rate" msgid "Transmit" msgstr "Transmit" msgid "Transmit Power" msgstr "Transmit Power" msgid "Transmitter Antenna" msgstr "Transmitter Antenna" msgid "Trigger" msgstr "" msgid "Trigger Mode" msgstr "" msgid "Tunnel ID" msgstr "" msgid "Tunnel Interface" msgstr "" msgid "Tunnel Link" msgstr "" msgid "Turbo Mode" msgstr "Turbo Mode" msgid "Tx-Power" msgstr "" msgid "Type" msgstr "Type" msgid "UDP:" msgstr "" msgid "UMTS only" msgstr "" msgid "UMTS/GPRS/EV-DO" msgstr "" msgid "USB Device" msgstr "" msgid "UUID" msgstr "" msgid "Unable to dispatch" msgstr "" msgid "Unknown" msgstr "" msgid "Unknown Error, password not changed!" msgstr "" msgid "Unmanaged" msgstr "" msgid "Unsaved Changes" msgstr "Unsaved Changes" msgid "Unsupported protocol type." msgstr "" msgid "Update lists" msgstr "" msgid "" "Upload a sysupgrade-compatible image here to replace the running firmware. " "Check \"Keep settings\" to retain the current configuration (requires an " "OpenWrt compatible firmware image)." msgstr "" msgid "Upload archive..." msgstr "" msgid "Uploaded File" msgstr "Uploaded File" msgid "Uptime" msgstr "Uptime" msgid "Use /etc/ethers" msgstr "Use /etc/ethers" msgid "Use DHCP gateway" msgstr "" msgid "Use DNS servers advertised by peer" msgstr "" msgid "Use ISO/IEC 3166 alpha2 country codes." msgstr "" msgid "Use MTU on tunnel interface" msgstr "" msgid "Use TTL on tunnel interface" msgstr "" msgid "Use as root filesystem" msgstr "" msgid "Use broadcast flag" msgstr "" msgid "Use builtin IPv6-management" msgstr "" msgid "Use custom DNS servers" msgstr "" msgid "Use default gateway" msgstr "" msgid "Use gateway metric" msgstr "" msgid "Use routing table" msgstr "" msgid "" "Use the Add Button to add a new lease entry. The MAC-Address indentifies the host, the IPv4-Address specifies to the fixed " "address to use and the Hostname is assigned as symbolic name to the " "requesting host." msgstr "" msgid "Used" msgstr "Used" msgid "Used Key Slot" msgstr "" msgid "Username" msgstr "Username" msgid "VC-Mux" msgstr "" msgid "VLAN Interface" msgstr "" msgid "VLANs on %q" msgstr "" msgid "VLANs on %q (%s)" msgstr "" msgid "VPN Server" msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" msgid "Verify" msgstr "" msgid "Version" msgstr "Version" msgid "WDS" msgstr "WDS" msgid "WEP Open System" msgstr "" msgid "WEP Shared Key" msgstr "" msgid "WEP passphrase" msgstr "" msgid "WMM Mode" msgstr "WMM Mode" msgid "WPA passphrase" msgstr "" msgid "" "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " "and ad-hoc mode) to be installed." msgstr "" "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " "and ad-hoc mode) to be installed." msgid "Waiting for changes to be applied..." msgstr "" msgid "Waiting for command to complete..." msgstr "" msgid "Warning" msgstr "" msgid "Warning: There are unsaved changes that will be lost while rebooting!" msgstr "Warning: There are unsaved changes that will be lost while rebooting!" msgid "Wifi" msgstr "Wifi" msgid "Wireless" msgstr "" msgid "Wireless Adapter" msgstr "Wireless Adapter" msgid "Wireless Network" msgstr "Wireless Network" msgid "Wireless Overview" msgstr "Wireless Overview" msgid "Wireless Security" msgstr "Wireless Security" msgid "Wireless is disabled or not associated" msgstr "" msgid "Wireless is restarting..." msgstr "" msgid "Wireless network is disabled" msgstr "" msgid "Wireless network is enabled" msgstr "" msgid "Wireless restarted" msgstr "" msgid "Wireless shut down" msgstr "" msgid "Write received DNS requests to syslog" msgstr "" msgid "XR Support" msgstr "XR Support" msgid "" "You can enable or disable installed init scripts here. Changes will applied " "after a device reboot.
Warning: If you disable essential init " "scripts like \"network\", your device might become inaccessible!" msgstr "" "You can enable or disable installed init scripts here. Changes will applied " "after a device reboot.
Warning: If you disable essential init " "scripts like \"network\", your device might become inaccessible!" msgid "" "You must enable Java Script in your browser or LuCI will not work properly." msgstr "" msgid "any" msgstr "" msgid "auto" msgstr "auto" msgid "automatic" msgstr "automatic" msgid "baseT" msgstr "" msgid "bridged" msgstr "" msgid "create:" msgstr "" msgid "creates a bridge over specified interface(s)" msgstr "creates a bridge over specified interface(s)" msgid "dB" msgstr "" msgid "dBm" msgstr "" msgid "disable" msgstr "disable" msgid "disabled" msgstr "" msgid "expired" msgstr "" msgid "" "file where given DHCP-leases will be stored" msgstr "" "file where given DHCP-leases will be stored" msgid "forward" msgstr "" msgid "full-duplex" msgstr "" msgid "half-duplex" msgstr "" msgid "help" msgstr "help" msgid "hidden" msgstr "" msgid "hybrid mode" msgstr "" msgid "if target is a network" msgstr "if target is a network" msgid "input" msgstr "" msgid "kB" msgstr "" msgid "kB/s" msgstr "" msgid "kbit/s" msgstr "" msgid "local DNS file" msgstr "local DNS file" msgid "no" msgstr "" msgid "no link" msgstr "" msgid "none" msgstr "none" msgid "off" msgstr "" msgid "on" msgstr "" msgid "open" msgstr "" msgid "relay mode" msgstr "" msgid "routed" msgstr "" msgid "server mode" msgstr "" msgid "stateful-only" msgstr "" msgid "stateless" msgstr "" msgid "stateless + stateful" msgstr "" msgid "tagged" msgstr "" msgid "unknown" msgstr "" msgid "unlimited" msgstr "" msgid "unspecified" msgstr "" msgid "unspecified -or- create:" msgstr "unspecified -or- create:" msgid "untagged" msgstr "" msgid "yes" msgstr "" msgid "« Back" msgstr "« Back" #~ msgid "40MHz 2nd channel above" #~ msgstr "40MHz 2nd channel above" #~ msgid "40MHz 2nd channel below" #~ msgstr "40MHz 2nd channel below" #~ msgid "Accept router advertisements" #~ msgstr "Accept router advertisements" #~ msgid "Advertise IPv6 on network" #~ msgstr "Advertise IPv6 on network" #~ msgid "Advertised network ID" #~ msgstr "Advertised network ID" #~ msgid "Allowed range is 1 to 65535" #~ msgstr "Allowed range is 1 to 65535" #~ msgid "Active Leases" #~ msgstr "Active Leases" #~ msgid "Bit Rate" #~ msgstr "Bit Rate" #~ msgid "Configuration / Apply" #~ msgstr "Configuration / Apply" #~ msgid "Configuration / Changes" #~ msgstr "Configuration / Changes" #~ msgid "Configuration / Revert" #~ msgstr "Configuration / Revert" #~ msgid "MAC" #~ msgstr "MAC" #~ msgid "Encr." #~ msgstr "Encr." #~ msgid "WLAN-Scan" #~ msgstr "WLAN-Scan" #~ msgid "" #~ "Choose the network you want to attach to this wireless interface. Select " #~ "unspecified to not attach any network or fill out the " #~ "create field to define a new network." #~ msgstr "" #~ "Choose the network you want to attach to this wireless interface. Select " #~ "unspecified to not attach any network or fill out the " #~ "create field to define a new network." #~ msgid "Create Network" #~ msgstr "Create Network" #~ msgid "Link" #~ msgstr "Link" #~ msgid "Networks" #~ msgstr "Networks" #~ msgid "Power" #~ msgstr "Power" #~ msgid "Wifi networks in your local environment" #~ msgstr "Wifi networks in your local environment" #~ msgid "" #~ "CIDR-Notation: " #~ "address/prefix" #~ msgstr "" #~ "CIDR-Notation: " #~ "address/prefix" #~ msgid "DNS-Server" #~ msgstr "DNS-Server" #~ msgid "IPv4-Broadcast" #~ msgstr "IPv4-Broadcast" #~ msgid "IPv6-Address" #~ msgstr "IPv6-Address" #~ msgid "" #~ "The network ports on your router can be combined to several VLANs in which computers can " #~ "communicate directly with each other. VLANs are often used to separate different network " #~ "segments. Often there is by default one Uplink port for a connection to " #~ "the next greater network like the internet and other ports for a local " #~ "network." #~ msgstr "" #~ "The network ports on your router can be combined to several VLANs in which computers can " #~ "communicate directly with each other. VLANs are often used to separate different network " #~ "segments. Often there is by default one Uplink port for a connection to " #~ "the next greater network like the internet and other ports for a local " #~ "network." #~ msgid "Files to be kept when flashing a new firmware" #~ msgstr "Files to be kept when flashing a new firmware" #~ msgid "General" #~ msgstr "General" #~ msgid "" #~ "Here you can customize the settings and the functionality of LuCI." #~ msgstr "" #~ "Here you can customize the settings and the functionality of LuCI." #~ msgid "Post-commit actions" #~ msgstr "Post-commit actions" #~ msgid "" #~ "These commands will be executed automatically when a given UCI configuration is committed " #~ "allowing changes to be applied instantly." #~ msgstr "" #~ "These commands will be executed automatically when a given UCI configuration is committed " #~ "allowing changes to be applied instantly." #~ msgid "Web UI" #~ msgstr "Web UI" #~ msgid "PPTP-Server" #~ msgstr "" #~ "PPTP-Server" #~ msgid "ARP ping retries" #~ msgstr "ARP ping retries" #~ msgid "ATM Settings" #~ msgstr "ATM Settings" #~ msgid "Accept Router Advertisements" #~ msgstr "Accept Router Advertisements" #~ msgid "Access point (APN)" #~ msgstr "Access point (APN)" #~ msgid "Additional pppd options" #~ msgstr "Additional pppd options" #~ msgid "Allowed range is 1 to FFFF" #~ msgstr "Allowed range is 1 to FFFF" #~ msgid "Automatic Disconnect" #~ msgstr "Automatic Disconnect" #~ msgid "Backup Archive" #~ msgstr "Backup Archive" #~ msgid "" #~ "Configure the local DNS server to use the name servers adverticed by the " #~ "PPP peer" #~ msgstr "" #~ "Configure the local DNS server to use the name servers adverticed by the " #~ "PPP peer" #~ msgid "Connect script" #~ msgstr "Connect script" #~ msgid "Create backup" #~ msgstr "Create backup" #~ msgid "Disconnect script" #~ msgstr "Disconnect script" #~ msgid "Edit package lists and installation targets" #~ msgstr "Edit package lists and installation targets" #~ msgid "Enable IPv6 on PPP link" #~ msgstr "Enable IPv6 on PPP link" #~ msgid "Firmware image" #~ msgstr "Firmware image" #~ msgid "" #~ "Here you can backup and restore your router configuration and - if " #~ "possible - reset the router to the default settings." #~ msgstr "" #~ "Here you can backup and restore your router configuration and - if " #~ "possible - reset the router to the default settings." #~ msgid "Installation targets" #~ msgstr "Installation targets" #~ msgid "Keep configuration files" #~ msgstr "Keep configuration files" #~ msgid "Keep-Alive" #~ msgstr "Keep-Alive" #~ msgid "" #~ "Let pppd replace the current default route to use the PPP interface after " #~ "successful connect" #~ msgstr "" #~ "Let pppd replace the current default route to use the PPP interface after " #~ "successful connect" #~ msgid "Let pppd run this script after establishing the PPP link" #~ msgstr "Let pppd run this script after establishing the PPP link" #~ msgid "Let pppd run this script before tearing down the PPP link" #~ msgstr "Let pppd run this script before tearing down the PPP link" #~ msgid "" #~ "Make sure that you provide the correct pin code here or you might lock " #~ "your sim card!" #~ msgstr "" #~ "Make sure that you provide the correct pin code here or you might lock " #~ "your sim card!" #~ msgid "" #~ "Most of them are network servers, that offer a certain service for your " #~ "device or network like shell access, serving webpages like LuCI, doing mesh routing, sending " #~ "e-mails, ..." #~ msgstr "" #~ "Most of them are network servers, that offer a certain service for your " #~ "device or network like shell access, serving webpages like LuCI, doing mesh routing, sending " #~ "e-mails, ..." #~ msgid "Number of failed connection tests to initiate automatic reconnect" #~ msgstr "Number of failed connection tests to initiate automatic reconnect" #~ msgid "PIN code" #~ msgstr "PIN code" #~ msgid "PPP Settings" #~ msgstr "PPP Settings" #~ msgid "Package lists" #~ msgstr "Package lists" #~ msgid "Proceed reverting all settings and resetting to firmware defaults?" #~ msgstr "Proceed reverting all settings and resetting to firmware defaults?" #~ msgid "Processor" #~ msgstr "Processor" #~ msgid "Radius-Port" #~ msgstr "Radius-Port" #~ msgid "Radius-Server" #~ msgstr "Radius-Server" #~ msgid "Replace default route" #~ msgstr "Replace default route" #~ msgid "Reset router to defaults" #~ msgstr "Reset router to defaults" #~ msgid "" #~ "Seconds to wait for the modem to become ready before attempting to connect" #~ msgstr "" #~ "Seconds to wait for the modem to become ready before attempting to connect" #~ msgid "Service type" #~ msgstr "Service type" #~ msgid "Services and daemons perform certain tasks on your device." #~ msgstr "Services and daemons perform certain tasks on your device." #~ msgid "Settings" #~ msgstr "Settings" #~ msgid "Setup wait time" #~ msgstr "Setup wait time" #~ msgid "" #~ "Sorry. OpenWrt does not support a system upgrade on this platform.
" #~ "You need to manually flash your device." #~ msgstr "" #~ "Sorry. OpenWrt does not support a system upgrade on this platform.
" #~ "You need to manually flash your device." #~ msgid "Specify additional command line arguments for pppd here" #~ msgstr "Specify additional command line arguments for pppd here" #~ msgid "The device node of your modem, e.g. /dev/ttyUSB0" #~ msgstr "The device node of your modem, e.g. /dev/ttyUSB0" #~ msgid "Time (in seconds) after which an unused connection will be closed" #~ msgstr "Time (in seconds) after which an unused connection will be closed" #~ msgid "Update package lists" #~ msgstr "Update package lists" #~ msgid "Upload an OpenWrt image file to reflash the device." #~ msgstr "Upload an OpenWrt image file to reflash the device." #~ msgid "Upload image" #~ msgstr "Upload image" #~ msgid "Use peer DNS" #~ msgstr "Use peer DNS" #~ msgid "" #~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, " #~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support" #~ msgstr "" #~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, " #~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support" #~ msgid "back" #~ msgstr "back" #~ msgid "buffered" #~ msgstr "buffered" #~ msgid "cached" #~ msgstr "cached" #~ msgid "free" #~ msgstr "free" #~ msgid "static" #~ msgstr "static" #~ msgid "" #~ "LuCI is a collection " #~ "of free Lua software including an MVC-Webframework and webinterface for embedded devices. LuCI is licensed under the " #~ "Apache-License." #~ msgstr "" #~ "LuCI is a collection " #~ "of free Lua software including an MVC-Webframework and webinterface for embedded devices. LuCI is licensed under the " #~ "Apache-License." #~ msgid "SSH-Keys" #~ msgstr "SSH-Keys" #~ msgid "" #~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve " #~ "LuCI" #~ msgstr "" #~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve " #~ "LuCI" #~ msgid "" #~ "A small webserver which can be used to serve LuCI." #~ msgstr "" #~ "A small webserver which can be used to serve LuCI." #~ msgid "About" #~ msgstr "About" #~ msgid "Active IP Connections" #~ msgstr "Active IP Connections" #~ msgid "Addresses" #~ msgstr "Addresses" #~ msgid "Admin Password" #~ msgstr "Admin Password" #~ msgid "Alias" #~ msgstr "Alias" #~ msgid "Authentication Realm" #~ msgstr "Authentication Realm" #~ msgid "Bridge Port" #~ msgstr "Bridge Port" #~ msgid "" #~ "Change the password of the system administrator (User root)" #~ msgstr "" #~ "Change the password of the system administrator (User root)" #~ msgid "Client + WDS" #~ msgstr "Client + WDS" #~ msgid "Configuration file" #~ msgstr "Configuration file" #~ msgid "Connection timeout" #~ msgstr "Connection timeout" #~ msgid "Contributing Developers" #~ msgstr "Contributing Developers" #~ msgid "DHCP assigned" #~ msgstr "DHCP assigned" #~ msgid "Document root" #~ msgstr "Document root" #~ msgid "Enable Keep-Alive" #~ msgstr "Enable Keep-Alive" #~ msgid "Ethernet Bridge" #~ msgstr "Ethernet Bridge" #~ msgid "" #~ "Here you can paste public SSH-Keys " #~ "(one per line) for SSH public-key " #~ "authentication." #~ msgstr "" #~ "Here you can paste public SSH-Keys " #~ "(one per line) for SSH public-key " #~ "authentication." #~ msgid "ID" #~ msgstr "ID" #~ msgid "IP Configuration" #~ msgstr "IP Configuration" #~ msgid "Interface Status" #~ msgstr "Interface Status" #~ msgid "Lead Development" #~ msgstr "Lead Development" #~ msgid "Master" #~ msgstr "Master" #~ msgid "Master + WDS" #~ msgstr "Master + WDS" #~ msgid "Not configured" #~ msgstr "Not configured" #~ msgid "Password successfully changed" #~ msgstr "Password successfully changed" #~ msgid "Plugin path" #~ msgstr "Plugin path" #~ msgid "Ports" #~ msgstr "Ports" #~ msgid "Primary" #~ msgstr "Primary" #~ msgid "Project Homepage" #~ msgstr "Project Homepage" #~ msgid "Pseudo Ad-Hoc" #~ msgstr "Pseudo Ad-Hoc" #~ msgid "STP" #~ msgstr "STP" #~ msgid "Thanks To" #~ msgstr "Thanks To" #~ msgid "" #~ "The realm which will be displayed at the authentication prompt for " #~ "protected pages." #~ msgstr "" #~ "The realm which will be displayed at the authentication prompt for " #~ "protected pages." #~ msgid "Unknown Error" #~ msgstr "Unknown Error" #~ msgid "VLAN" #~ msgstr "VLAN" #~ msgid "defaults to /etc/httpd.conf" #~ msgstr "defaults to /etc/httpd.conf" #~ msgid "OPKG error code %i" #~ msgstr "OPKG error code %i" #~ msgid "Package lists updated" #~ msgstr "Package lists updated" #~ msgid "Upgrade installed packages" #~ msgstr "Upgrade installed packages" #~ msgid "" #~ "Also kernel or service logfiles can be viewed here to get an overview " #~ "over their current state." #~ msgstr "" #~ "Also kernel or service logfiles can be viewed here to get an overview " #~ "over their current state." #~ msgid "" #~ "Here you can find information about the current system status like CPU clock frequency, memory " #~ "usage or network interface data." #~ msgstr "" #~ "Here you can find information about the current system status like CPU clock frequency, memory " #~ "usage or network interface data." #~ msgid "Search file..." #~ msgstr "Search file..." #~ msgid "" #~ "LuCI is a free, " #~ "flexible, and user friendly graphical interface for configuring OpenWrt " #~ "Kamikaze." #~ msgstr "" #~ "LuCI is a free, " #~ "flexible, and user friendly graphical interface for configuring OpenWrt " #~ "Kamikaze." #~ msgid "And now have fun with your router!" #~ msgstr "And now have fun with your router!" #~ msgid "" #~ "As we always want to improve this interface we are looking forward to " #~ "your feedback and suggestions." #~ msgstr "" #~ "As we always want to improve this interface we are looking forward to " #~ "your feedback and suggestions." #~ msgid "Hello!" #~ msgstr "Hello!" #~ msgid "" #~ "Notice: In LuCI " #~ "changes have to be confirmed by clicking Changes - Save & Apply " #~ "before being applied." #~ msgstr "" #~ "Notice: In LuCI " #~ "changes have to be confirmed by clicking Changes - Save & Apply " #~ "before being applied." #~ msgid "" #~ "On the following pages you can adjust all important settings of your " #~ "router." #~ msgstr "" #~ "On the following pages you can adjust all important settings of your " #~ "router." #~ msgid "The LuCI Team" #~ msgstr "The LuCI Team" #~ msgid "" #~ "This is the administration area of LuCI." #~ msgstr "" #~ "This is the administration area of LuCI." #~ msgid "User Interface" #~ msgstr "User Interface" #~ msgid "enable" #~ msgstr "enable" #~ msgid "(hidden)" #~ msgstr "(hidden)" #~ msgid "(optional)" #~ msgstr "(optional)" #~ msgid "DNS-Port" #~ msgstr "DNS-Port" #~ msgid "" #~ "DNS-Server will be queried in " #~ "the order of the resolvfile" #~ msgstr "" #~ "DNS-Server will be queried in " #~ "the order of the resolvfile" #~ msgid "" #~ "max. DHCP-Leases" #~ msgstr "" #~ "max. DHCP-Leases" #~ msgid "" #~ "max. EDNS0 packet size" #~ msgstr "" #~ "max. EDNS0 packet size" #~ msgid "AP-Isolation" #~ msgstr "AP-Isolation" #~ msgid "Add the Wifi network to physical network" #~ msgstr "Add the Wifi network to physical network" #~ msgid "Aliases" #~ msgstr "Aliases" #~ msgid "Attach to existing network" #~ msgstr "Attach to existing network" #~ msgid "Clamp Segment Size" #~ msgstr "Clamp Segment Size" #~ msgid "Create Or Attach Network" #~ msgstr "Create Or Attach Network" #~ msgid "DHCP" #~ msgstr "DHCP" #~ msgid "Devices" #~ msgstr "Devices" #~ msgid "Don't forward reverse lookups for local networks" #~ msgstr "Don't forward reverse lookups for local networks" #~ msgid "Enable TFTP-Server" #~ msgstr "Enable TFTP-Server" #~ msgid "Errors" #~ msgstr "Errors" #~ msgid "Essentials" #~ msgstr "Essentials" #~ msgid "Expand Hosts" #~ msgstr "Expand Hosts" #~ msgid "First leased address" #~ msgstr "First leased address" #~ msgid "" #~ "Fixes problems with unreachable websites, submitting forms or other " #~ "unexpected behaviour for some ISPs." #~ msgstr "" #~ "Fixes problems with unreachable websites, submitting forms or other " #~ "unexpected behaviour for some ISPs." #~ msgid "Hardware Address" #~ msgstr "Hardware Address" #~ msgid "Here you can configure installed wifi devices." #~ msgstr "Here you can configure installed wifi devices." #~ msgid "" #~ "If the interface is attached to an existing network it will be " #~ "bridged to the existing interfaces and is covered by the " #~ "firewall zone of the choosen network.
Uncheck the attach option to " #~ "define a new standalone network for this interface." #~ msgstr "" #~ "If the interface is attached to an existing network it will be " #~ "bridged to the existing interfaces and is covered by the " #~ "firewall zone of the choosen network.
Uncheck the attach option to " #~ "define a new standalone network for this interface." #~ msgid "Ignore /etc/hosts" #~ msgstr "Ignore /etc/hosts" #~ msgid "Independent (Ad-Hoc)" #~ msgstr "Independent (Ad-Hoc)" #~ msgid "Internet Connection" #~ msgstr "Internet Connection" #~ msgid "Join (Client)" #~ msgstr "Join (Client)" #~ msgid "Leases" #~ msgstr "Leases" #~ msgid "Local Domain" #~ msgstr "Local Domain" #~ msgid "Local Network" #~ msgstr "Local Network" #~ msgid "Local Server" #~ msgstr "Local Server" #~ msgid "Network Boot Image" #~ msgstr "Network Boot Image" #~ msgid "" #~ "Network Name (ESSID)" #~ msgstr "" #~ "Network Name (ESSID)" #~ msgid "Number of leased addresses" #~ msgstr "Number of leased addresses" #~ msgid "Path" #~ msgstr "Path" #~ msgid "Perform Actions" #~ msgstr "Perform Actions" #~ msgid "Prevents Client to Client communication" #~ msgstr "Prevents Client to Client communication" #~ msgid "Provide (Access Point)" #~ msgstr "Provide (Access Point)" #~ msgid "Resolvfile" #~ msgstr "Resolvfile" #~ msgid "TFTP-Server Root" #~ msgstr "TFTP-Server Root" #~ msgid "TX / RX" #~ msgstr "TX / RX" #~ msgid "The following changes have been applied" #~ msgstr "The following changes have been applied" #~ msgid "" #~ "When flashing a new firmware with LuCI these files will be added to the new firmware " #~ "installation." #~ msgstr "" #~ "When flashing a new firmware with LuCI these files will be added to the new firmware " #~ "installation." #~ msgid "Wireless Scan" #~ msgstr "Wireless Scan" #~ msgid "" #~ "With DHCP " #~ "network members can automatically receive their network settings (IP-address, netmask, DNS-server, ...)." #~ msgstr "" #~ "With DHCP " #~ "network members can automatically receive their network settings (IP-address, netmask, DNS-server, ...)." #~ msgid "" #~ "You are about to join the wireless network %s. " #~ "In order to complete the process, you need to provide some additional " #~ "details." #~ msgstr "" #~ "You are about to join the wireless network %s. " #~ "In order to complete the process, you need to provide some additional " #~ "details." #~ msgid "" #~ "You can run several wifi networks with one device. Be aware that there " #~ "are certain hardware and driverspecific restrictions. Normally you can " #~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network " #~ "simultaneously." #~ msgstr "" #~ "You can run several wifi networks with one device. Be aware that there " #~ "are certain hardware and driverspecific restrictions. Normally you can " #~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network " #~ "simultaneously." #~ msgid "" #~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP " #~ "support" #~ msgstr "" #~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP " #~ "support" #~ msgid "" #~ "You need to install wpa-supplicant to use WPA!" #~ msgstr "" #~ "You need to install wpa-supplicant to use WPA!" #~ msgid "" #~ "You need to install the Broadcom nas supplicant " #~ "to use WPA!" #~ msgstr "" #~ "You need to install the Broadcom nas supplicant " #~ "to use WPA!" #~ msgid "Zone" #~ msgstr "Zone" #~ msgid "additional hostfile" #~ msgstr "additional hostfile" #~ msgid "adds domain names to hostentries in the resolv file" #~ msgstr "adds domain names to hostentries in the resolv file" #~ msgid "automatically reconnect" #~ msgstr "automatically reconnect" #~ msgid "concurrent queries" #~ msgstr "concurrent queries" #~ msgid "" #~ "disable DHCP " #~ "for this interface" #~ msgstr "" #~ "disable DHCP " #~ "for this interface" #~ msgid "disconnect when idle for" #~ msgstr "disconnect when idle for" #~ msgid "don't cache unknown" #~ msgstr "don't cache unknown" #~ msgid "" #~ "filter useless DNS-queries of " #~ "Windows-systems" #~ msgstr "" #~ "filter useless DNS-queries of " #~ "Windows-systems" #~ msgid "installed" #~ msgstr "installed" #~ msgid "localises the hostname depending on its subnet" #~ msgstr "localises the hostname depending on its subnet" #~ msgid "manual" #~ msgstr "manual" #~ msgid "not installed" #~ msgstr "not installed" #~ msgid "" #~ "prevents caching of negative DNS-replies" #~ msgstr "" #~ "prevents caching of negative DNS-replies" #~ msgid "query port" #~ msgstr "query port" #~ msgid "transmitted / received" #~ msgstr "transmitted / received" #~ msgid "all" #~ msgstr "all" #~ msgid "Code" #~ msgstr "Code" #~ msgid "Distance" #~ msgstr "Distance" #~ msgid "Legend" #~ msgstr "Legend" #~ msgid "Library" #~ msgstr "Library" #~ msgid "see '%s' manpage" #~ msgstr "see '%s' manpage" #~ msgid "Package Manager" #~ msgstr "Package Manager" #~ msgid "Service" #~ msgstr "Service" #~ msgid "Statistics" #~ msgstr "Statistics" #~ msgid "zone" #~ msgstr "Zone"