'use strict';
'require view';
'require form';

return view.extend({
	render: function() {
		var m, s, o;

		m = new form.Map('ser2net', 'ser2net');

		s = m.section(form.TypedSection, "proxy", _("Proxies"));
		s.anonymous = true;
		s.addremove = true;

		o = s.option(form.Flag, "enabled", _("Enabled"));
		o.rmempty = false;

		o = s.option(form.Value, "port", _("Service port"), _("The TCP port to listen on."));
		o.rmempty = false;
		o.default = 5000;

		o = s.option(form.ListValue, "protocol", _("Protocol"), _("The protocol to listen to."));
		o.rmempty = false;
		o.value("raw", _("Raw"));
		o.value("rawlp", _("Rawlp"));
		o.value("telnet", _("Telnet"));
		o.value("off", _("Off"));
		o.default = "raw";

		o = s.option(form.Value, "timeout", _("Timeout"), _("The amount of seconds of inactivity before a disconnect occurs.<br/>A value of zero means wait indefinitely."));
		o.rmempty = false;
		o.default = 0;

		o = s.option(form.Value, "device", _("Device"), _("The name of the device to connect to.<br/>This must be in the form of /dev/<device>."));
		o.rmempty = false;
		o.default = "/dev/ttyUSB0";

		o = s.option(form.ListValue, "baudrate", _("Baud rate"), _("The speed the device port should operate at."));
		o.rmempty = false;
		o.value(300);
		o.value(1200);
		o.value(2400);
		o.value(4800);
		o.value(9600);
		o.value(19200);
		o.value(38400);
		o.value(57600);
		o.value(115200);
		o.default = 9600;

		o = s.option(form.ListValue, "databits", _("Data bits"));
		o.rmempty = false;
		o.value(8);
		o.value(7);
		o.default = 8;

		o = s.option(form.ListValue, "parity", _("Parity"));
		o.rmempty = false;
		o.value("none", _("None"));
		o.value("even", _("Even"));
		o.value("odd", _("Odd"));
		o.default = "none";

		o = s.option(form.ListValue, "stopbits", _("Stop bits"));
		o.rmempty = false;
		o.value(1);
		o.value(2);
		o.default = 1;

		s.option(form.Flag, "rtscts", _("Use RTS and CTS lines"));
		s.option(form.Flag, "local", _("Ignore modem control signals"));
		s.option(form.Flag, "remctl", _("Allow the RFC 2217 protocol"));
		s.option(form.DynamicList, "options", _("Extra options"));
		s.option(form.Value, "led_tx", _("TX LED configuration"));
		s.option(form.Value, "led_rx", _("RX LED configuration"));

		return m.render();
	}
});