--[[
Copyright 2011 Iordan Iordanov <iiordanov (AT) gmail.com>
This file is part of luci-pbx-voicemail.
luci-pbx-voicemail is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
luci-pbx-voicemail is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with luci-pbx-voicemail. If not, see <http://www.gnu.org/licenses/>.
]]--
if nixio.fs.access("/etc/init.d/asterisk") then
server = "asterisk"
elseif nixio.fs.access("/etc/init.d/freeswitch") then
server = "freeswitch"
else
server = ""
end
modulename = "pbx-voicemail"
vmlogfile = "/tmp/last_sent_voicemail.log"
m = Map (modulename, translate("Voicemail Setup"),
translate("Here you can configure a global voicemail for this PBX. Since this system is \
intended to run on embedded systems like routers, there is no local storage of voicemail - \
it must be sent out by email. Therefore you need to configure an outgoing mail (SMTP) server \
(for example your ISP's, Google's, or Yahoo's SMTP server), and provide a list of \
addresses that receive recorded voicemail."))
-- Recreate the config, and restart services after changes are commited to the configuration.
function m.on_after_commit(self)
luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
end
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "global_voicemail", "voicemail", translate("Global Voicemail Setup"),
translate("When you enable voicemail, you will have the opportunity to specify \
email addresses that receive recorded voicemail. You must also set up an SMTP server below."))
s.anonymous = true
enable = s:option(ListValue, "enabled", translate("Enable Voicemail"))
enable:value("yes", translate("Yes"))
enable:value("no", translate("No"))
enable.default = "no"
emails = s:option(DynamicList, "global_email_addresses",
translate("Email Addresses that Receive Voicemail"))
emails:depends("enabled", "yes")
savepath = s:option(Value, "global_save_path", translate("Local Storage Directory"),
translate("You can also retain copies of voicemail messages on the device running \
your PBX. The path specified here will be created if it doesn't exist. \
Beware of limited space on embedded devices like routers, and enable this \
option only if you know what you are doing."))
savepath.optional = true
if nixio.fs.access("/etc/pbx-voicemail/recordings/greeting.gsm") then
m1 = s:option(DummyValue, "_m1")
m1:depends("enabled", "yes")
m1.default = "NOTE: Found a voicemail greeting. To check or change your voicemail greeting, dial *789 \
and the system will play back your current greeting. After that, a long beep will sound and \
you can press * in order to record a new message. Hang up to avoid recording a message. \
If you press *, a second long beep will sound, and you can record a new greeting. \
Hang up or press # to stop recording. When # is pressed the system will play back the \
new greeting."
else
m1 = s:option(DummyValue, "_m1")
m1:depends("enabled", "yes")
m1.default = "WARNING: Could not find voicemail greeting. Callers will hear only a beep before \
recording starts. To record a greeting, dial *789, and press * after the long beep. \
If you press *, a second long beep will sound, and you can record a new greeting. \
Hang up or press # to stop recording. When # is pressed the system will play back the \
new greeting."
end
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "voicemail_smtp", "voicemail", translate("Outgoing mail (SMTP) Server"),
translate("In order for this PBX to send emails containing voicemail recordings, you need to \
set up an SMTP server here. Your ISP usually provides an SMTP server for that purpose. \
You can also set up a third party SMTP server such as the one provided by Google or Yahoo."))
s.anonymous = true
serv = s:option(Value, "smtp_server", translate("SMTP Server Hostname or IP Address"))
serv.datatype = "host(0)"
port = s:option(Value, "smtp_port", translate("SMTP Port Number"))
port.datatype = "port"
port.default = "25"
tls = s:option(ListValue, "smtp_tls", translate("Secure Connection Using TLS"))
tls:value("on", translate("Yes"))
tls:value("off", translate("No"))
tls.default = "on"
auth = s:option(ListValue, "smtp_auth", translate("SMTP Server Authentication"))
auth:value("on", translate("Yes"))
auth:value("off", translate("No"))
auth.default = "off"
user = s:option(Value, "smtp_user", translate("SMTP User Name"))
user:depends("smtp_auth", "on")
pwd = s:option(Value, "smtp_password", translate("SMTP Password"),
translate("Your real SMTP password is not shown for your protection. It will be changed \
only when you change the value in this box."))
pwd.password = true
pwd:depends("smtp_auth", "on")
-- We skip reading off the saved value and return nothing.
function pwd.cfgvalue(self, section)
return "Password Not Displayed"
end
-- We check the entered value against the saved one, and only write if the entered value is
-- something other than the empty string, and it differes from the saved value.
function pwd.write(self, section, value)
local orig_pwd = m:get(section, self.option)
if value == "Password Not Displayed" then value = "" end
if value and #value > 0 and orig_pwd ~= value then
Value.write(self, section, value)
end
end
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "voicemail_log", "voicemail", translate("Last Sent Voicemail Log"))
s.anonymous = true
s:option (DummyValue, "vmlog")
sts = s:option(DummyValue, "_sts")
sts.template = "cbi/tvalue"
sts.rows = 5
function sts.cfgvalue(self, section)
log = nixio.fs.readfile(vmlogfile)
if log == nil or log == "" then
log = "No errors or messages reported."
end
return log
end
return m