# # Yangfl , 2018. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "PO-Revision-Date: 2020-03-09 14:34+0000\n" "Last-Translator: Trevor \n" "Language-Team: Chinese (Traditional) \n" "Language: zh_Hant\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Weblate 4.0-dev\n" #: applications/luci-app-olsr/luasrc/view/status-olsr/mid.htm:13 msgid "Active MID announcements" msgstr "活動的 MID 通告" #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:14 msgid "Active OLSR nodes" msgstr "活動的 OLSR 節點" #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:82 msgid "Active host net announcements" msgstr "活動的主機網路通告" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:45 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:45 msgid "Advanced Settings" msgstr "進階設定" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141 msgid "Allow gateways with NAT" msgstr "允許帶 NAT 的閘道器" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141 msgid "Allow the selection of an outgoing IPv4 gateway with NAT" msgstr "允許選擇有 NAT 的 IPv4 閘道器" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:149 msgid "Announce uplink" msgstr "通告上行連結" #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:39 #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:90 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:47 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:107 msgid "Announced network" msgstr "通告的網路" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:11 msgid "Bad (ETX > 10)" msgstr "差（ETX > 10）" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:20 msgid "Bad (SNR < 5)" msgstr "差（SNR < 5）" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:12 msgid "Both values must use the dotted decimal notation." msgstr "兩個值必須使用點分十進位制表示法。" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:30 msgid "Broadcast address" msgstr "廣播位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:265 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:90 msgid "Can only be a valid IPv4 or IPv6 address or 'default'" msgstr "必須是有效的 IPv4 或 IPv6 位址，或“預設”" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:259 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:90 msgid "Can only be a valid IPv6 address or 'default'" msgstr "必須是有效的 IPv6 位址，或“預設”" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:198 msgid "Configuration" msgstr "設定" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:56 msgid "" "Could not get any data. Make sure the jsoninfo plugin is installed and " "allows connections from localhost." msgstr "" "無法獲取任何資料。確保已安裝 jsoninfo 外掛，並允許來自 localhost 的連線。" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:24 msgid "Device" msgstr "裝置" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:75 msgid "Display" msgstr "顯示" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:60 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:112 msgid "Downlink" msgstr "下行連結" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:203 msgid "Download Config" msgstr "下載配置" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:57 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:109 #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:26 msgid "ETX" msgstr "ETX" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:140 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:365 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:134 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:346 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:35 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:35 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:15 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:15 msgid "Enable" msgstr "啟用" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:140 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:134 msgid "" "Enable SmartGateway. If it is disabled, then all other SmartGateway " "parameters are ignored. Default is \"no\"." msgstr "" "啟用 SmartGateway。如果禁用，則將忽略 SmartGateway 的其他所有引數。預設" "值：“no”" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:36 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:36 msgid "Enable this interface." msgstr "啟用這個埠" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:249 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:249 msgid "Enabled" msgstr "啟用" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:5 msgid "Expected retransmission count" msgstr "預期重發數" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:71 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:65 msgid "FIB metric" msgstr "FIB 度量" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:72 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:66 msgid "" "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" " "means that the metric value is always 2. This is the preferred value because " "it helps the Linux kernel routing to clean up older routes. \"correct\" uses " "the hopcount as the metric value. \"approx\" uses the hopcount as the metric " "value too, but does only update the hopcount if the nexthop changes too. " "Default is \"flat\"." msgstr "" "FIBMetric 控制主機路由 OLSRd 集的度量標準值。“flat”表示度量值始終為2。這是首" "選值，因為它有助於 linux 核心清理舊路由。“correct”使用 hopcount 作為度量" "值。“approx”也使用 hopcount 作為度量值，但只有在下一次更改時才更新 hopcount。" "預設為“flat”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:112 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:106 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\"" msgstr "TC 的魚眼機制（校驗和開啟）。預設為“開啟”" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:55 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:107 msgid "Gateway" msgstr "閘道器" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:42 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:222 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:42 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:216 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:31 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:31 msgid "General Settings" msgstr "一般設定" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:39 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:39 msgid "General settings" msgstr "一般設定" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:9 msgid "Good (2 < ETX < 4)" msgstr "好（2 < ETX < 4）" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:18 msgid "Good (30 > SNR > 20)" msgstr "好（30 > SNR > 20）" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:8 #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:17 msgid "Green" msgstr "綠" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:53 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:402 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:383 #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:178 msgid "HNA" msgstr "HNA" #: applications/luci-app-olsr/luasrc/controller/olsr4.lua:24 msgid "HNA Announcements" msgstr "HNA 通告" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:341 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:322 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:165 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:152 msgid "HNA interval" msgstr "HNA 間隔" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:347 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:328 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:171 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:158 msgid "HNA validity time" msgstr "HNA 有效時長" #: applications/luci-app-olsr/luasrc/controller/olsr6.lua:24 msgid "HNA6 Announcements" msgstr "HNA 通告" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:381 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:362 msgid "Hello" msgstr "Hello" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:305 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:286 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:129 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:116 msgid "Hello interval" msgstr "Hello 間隔" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:311 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:292 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:135 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:122 msgid "Hello validity time" msgstr "Hello 有效時長" #: applications/luci-app-olsr/luasrc/view/status-olsr/common_js.htm:12 #: applications/luci-app-olsr/luasrc/view/status-olsr/common_js.htm:20 msgid "Hide IPv4" msgstr "隱藏 IPv4" #: applications/luci-app-olsr/luasrc/view/status-olsr/common_js.htm:13 #: applications/luci-app-olsr/luasrc/view/status-olsr/common_js.htm:28 msgid "Hide IPv6" msgstr "隱藏 IPv6" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:12 msgid "Hna4" msgstr "Hna4" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:28 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:10 msgid "Hna6" msgstr "Hna6" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:58 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:110 msgid "Hops" msgstr "躍點" #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:61 #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:127 msgid "Hostname" msgstr "主機名稱" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8 msgid "" "Hosts in an OLSR routed network can announce connectivity to external " "networks using HNA messages." msgstr "OLSR 路由網路中的主機可以使用 HNA 訊息通告與外部網路的連線。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7 msgid "" "Hosts in an OLSR routed network can announce connectivity to external " "networks using HNA6 messages." msgstr "OLSR 路由網路中的主機可以使用 HNA6 訊息通告與外部網路的連線。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:117 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:111 msgid "" "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more " "robustness to the link sensing but delays neighbor registration. Defaults is " "\"yes\"" msgstr "" "滯後鏈路檢測（僅適用於 hopcount 度量）。滯後增加了鏈路感測的健壯性，但延遲了" "鄰居註冊過程。預設值為“是”" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:223 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:217 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:32 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:32 msgid "IP Addresses" msgstr "IP 位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:48 msgid "" "IP-version to use. If 6and4 is selected then one olsrd instance is started " "for each protocol." msgstr "要使用的 IP 版本。如果選擇 6and4，則為每個協議啟動一個 olsrd 例項。" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:61 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:113 msgid "IPv4" msgstr "IPv4" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:278 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:103 msgid "IPv4 broadcast" msgstr "IPv4 廣播位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:279 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:104 msgid "" "IPv4 broadcast address for outgoing OLSR packets. One useful example would " "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the " "interface broadcast IP." msgstr "" "傳出 OLSR 資料包的 IPv4 廣播位址。一個有用的例子是 255.255.255.255。預設" "為“0.0.0.0”，將觸發使用介面的 IP 廣播位址。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:291 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:116 msgid "IPv4 source" msgstr "IPv4 源位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:292 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:117 msgid "" "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which " "triggers usage of the interface IP." msgstr "傳出 OLSR 包的 IPv4 源位址。預設為“0.0.0.0”，將觸發使用介面的 IP。" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:62 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:114 msgid "IPv6" msgstr "IPv6" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:285 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:272 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:110 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:103 msgid "IPv6 multicast" msgstr "IPv6 組播位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:286 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:273 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:111 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:104 msgid "" "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal " "multicast." msgstr "IPv6 組播位址。預設為“FF02::6D”，即 manet-router 鏈路本地組播位址。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:28 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:10 msgid "" "IPv6 network must be given in full notation, prefix must be in CIDR notation." msgstr "IPv6 網路必須完整表出，字首必須是 CIDR 表示法。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:297 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:278 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:122 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:109 msgid "IPv6 source" msgstr "IPv6 源位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:298 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:279 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:123 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:110 msgid "" "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches " "the prefix of this parameter. Default is \"0::/0\", which triggers the usage " "of a not-linklocal interface IP." msgstr "" "IPv6 源字首。OLSRd 將選擇一個與此引數字首匹配的介面 IP。預設為“0::/0”，觸發使" "用介面的非鏈路本地 IP。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:184 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:178 msgid "IPv6-Prefix of the uplink" msgstr "IPv6 上行鏈路字首" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:202 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:196 msgid "" "If the route to the current gateway is to be changed, the ETX value of this " "gateway is multiplied with this value before it is compared to the new one. " "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 " "if changed.
WARNING: This parameter should not be used together " "with the etx_ffeth metric!
Defaults to \"1.0\"." msgstr "" "如果要更改到當前閘道器的路由，則在將該閘道器與新閘道器進行比較之前，將該閘道" "器的ETX值乘以該值。引數可以是介於0.1和1.0之間的值，但如果更改則應接近1.0。" "
警告：此引數不應與etx_ffeth指標一起使用！
預設值到“1.0”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:166 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:160 msgid "" "If this Node uses NAT for connections to the internet. Default is \"yes\"." msgstr "如果此節點使用 NAT 連線到網際網路。預設為“是”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:27 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:27 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:23 #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:62 #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:128 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:49 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:109 msgid "Interface" msgstr "介面" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:227 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:221 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:52 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:52 msgid "" "Interface mode is used to prevent unnecessary packet forwarding on switched " "ethernet interfaces. Valid modes are \"mesh\" and \"ether\". Default is " "\"mesh\"." msgstr "" "介面模式用於防止乙太網交換機介面上不必要的資料包轉發。有效模式" "是“mesh”和“ether”。預設為“mesh”。" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:70 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:354 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:335 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:14 #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:163 msgid "Interfaces" msgstr "介面" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:218 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:212 msgid "Interfaces Defaults" msgstr "介面預設值" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:47 msgid "Internet protocol" msgstr "網際網路協議" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:60 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:54 msgid "" "Interval to poll network interfaces for configuration changes (in seconds). " "Default is \"2.5\"." msgstr "輪詢網路介面以進行配置更改的間隔（秒）。預設值為“2.5”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:268 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:262 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:93 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:93 msgid "Invalid Value for LQMult-Value. Must be between 0.01 and 1.0." msgstr "LQMult-Value 的值無效。必須介於0.01和1.0之間。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:271 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:265 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:96 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:96 msgid "" "Invalid Value for LQMult-Value. You must use a decimal number between 0.01 " "and 1.0 here." msgstr "LQMult-Value 的值無效。您必須在此處使用介於0.01和1.0之間的十進位制數。" #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:98 msgid "Known OLSR routes" msgstr "已知的 OLSR 路由" #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:24 msgid "LQ" msgstr "LQ" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:90 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:84 msgid "LQ aging" msgstr "LQ 老化" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:96 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:90 msgid "LQ algorithm" msgstr "LQ 演算法" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:111 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:105 msgid "LQ fisheye" msgstr "LQ 魚眼" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:82 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:76 msgid "LQ level" msgstr "LQ 級別" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:262 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:256 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:87 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:87 msgid "" "LQMult requires two values (IP address or 'default' and multiplicator) " "separated by space." msgstr "LQMult 需要用空格分隔的兩個值（IP 位址或“default”，加上乘數）。" #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:23 msgid "Last hop" msgstr "最後一跳" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:1 msgid "Legend" msgstr "Legend" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:23 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:257 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:23 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:257 msgid "Library" msgstr "庫" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:43 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:43 msgid "Link Quality Settings" msgstr "連結質量設定" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:91 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:85 msgid "" "Link quality aging factor (only for lq level 2). Tuning parameter for " "etx_float and etx_fpm, smaller values mean slower changes of ETX value. " "(allowed values are between 0.01 and 1.0)" msgstr "" "鏈路質量老化因子（僅適用於 lq 級別2）。調整 etx_float 和 etx_fpm 的引數，值越" "小意味著 ETX 值的變化越慢。（允許值介於0.01和1.0之間）" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:97 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:91 msgid "" "Link quality algorithm (only for lq level 2).
etx_float: " "floating point ETX with exponential aging
etx_fpm : same as " "etx_float, but with integer arithmetic
etx_ff : ETX freifunk, an " "etx variant which use all OLSR traffic (instead of only hellos) for ETX " "calculation
etx_ffeth: incompatible variant of etx_ff that " "allows ethernet links with ETX 0.1.
Defaults to \"etx_ff\"" msgstr "" "鏈路質量演算法（僅適用於 lq 級別2）。
etx_float：浮點數 ETX，按指" "數函式老化
etx_fpm：與etx_float 相同，但按整數算術
etx_ff：ETX freifunk，一種使用所有 OLSR 流量（而不僅僅是 hello）進行 " "ETX 計算的 etx 變體
etx_ffeth：不相容的變體 etx_ff，允許乙太網連" "結使用 ETX 0.1。
預設為“etx_ff”" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:83 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:77 msgid "" "Link quality level switch between hopcount and cost-based (mostly ETX) " "routing.
0 = do not use link quality
2 = use link " "quality for MPR selection and routing
Default is \"2\"" msgstr "" "在 hopcount 和基於代價（主要是 ETX）路由之間切換連結質量級別。
0 " "= 不使用連結質量
2 = 使用連結質量進行 MPR 選擇和路由
預設" "為“2”" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:245 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:239 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:70 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:70 msgid "LinkQuality Multiplicator" msgstr "LinkQuality 乘數" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:188 msgid "Links per node (average)" msgstr "每個節點的連結數（平均）" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:183 msgid "Links total" msgstr "連結總數" #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:63 #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:129 msgid "Local interface IP" msgstr "本地介面 IP" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:58 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:395 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:376 msgid "MID" msgstr "MID" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:329 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:310 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:153 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:140 msgid "MID interval" msgstr "MID 間隔" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:335 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:316 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:159 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:146 msgid "MID validity time" msgstr "MID 有效期" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:26 msgid "MTU" msgstr "MTU" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:132 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:126 msgid "Main IP" msgstr "主要 IP" #: applications/luci-app-olsr/luasrc/view/status-olsr/error_olsr.htm:10 msgid "" "Make sure that OLSRd is running, the \"jsoninfo\" plugin is loaded, " "configured on port 9090 and accepts connections from \"127.0.0.1\"." msgstr "" "確保 OLSRd 正在執行，載入了“jsoninfo”外掛，在埠9090上配置接受來" "自“127.0.0.1”的連線。" #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:50 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:110 msgid "Metric" msgstr "度量" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:226 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:376 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:220 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:357 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:51 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:51 msgid "Mode" msgstr "模式" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:246 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:71 msgid "" "Multiply routes with the factor given here. Allowed values are between 0.01 " "and 1.0. It is only used when LQ-Level is greater than 0. Examples:
reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5
reduce LQ to all " "nodes on this interface by 20%: default 0.8" msgstr "" "使用此處給出的因子放大路由 LQ。允許值介於0.01和1.0之間。它僅在 LQ-Level 大於0" "時使用。示例：
將到 192.168.0.1 的 LQ 減半：192.168.0.1 0.5
將此接" "口到所有節點的 LQ 減少20％：default 0.8" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:240 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:71 msgid "" "Multiply routes with the factor given here. Allowed values are between 0.01 " "and 1.0. It is only used when LQ-Level is greater than 0. Examples:
reduce LQ to fd91:662e:3c58::1 by half: fd91:662e:3c58::1 0.5
reduce " "LQ to all nodes on this interface by 20%: default 0.8" msgstr "" "使用此處給出的因子放大路由 LQ。允許值介於0.01和1.0之間。它僅在 LQ-Level 大於0" "時使用。示例：
將到 fd91:662e:3c58::1 的 LQ 減半：fd91:662e:3c58::1 " "0.5
將此介面到所有節點的 LQ 減少20％：default 0.8" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:201 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:195 msgid "NAT threshold" msgstr "NAT 閾值" #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:25 msgid "NLQ" msgstr "NLQ" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:168 msgid "Neighbors" msgstr "鄰居" #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:60 #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:126 msgid "Neighbour IP" msgstr "鄰居 IP" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:37 msgid "Neighbours" msgstr "鄰居" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:21 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:29 msgid "Netmask" msgstr "子網掩碼" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:373 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:354 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:44 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:44 #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:160 msgid "Network" msgstr "網路" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:17 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:34 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:16 msgid "Network address" msgstr "網路位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:59 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:53 msgid "Nic changes poll interval" msgstr "Nic 更改輪詢間隔" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:173 msgid "Nodes" msgstr "節點" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:27 msgid "OLSR" msgstr "OLSR" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrddisplay.lua:4 msgid "OLSR - Display Options" msgstr "OLSR - 顯示選項" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8 msgid "OLSR - HNA-Announcements" msgstr "OLSR - HNA-通告" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7 msgid "OLSR - HNA6-Announcements" msgstr "OLSR - HNA6-通告" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:9 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:216 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:9 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:216 msgid "OLSR - Plugins" msgstr "OLSR - 外掛" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:12 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:12 #: applications/luci-app-olsr/luasrc/view/status-olsr/error_olsr.htm:8 msgid "OLSR Daemon" msgstr "OLSR 守護程序" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:14 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:14 msgid "OLSR Daemon - Interface" msgstr "OLSR 守護程序 - 介面" #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:117 msgid "OLSR connections" msgstr "OLSR 連線" #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:40 #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:91 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:48 #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:108 msgid "OLSR gateway" msgstr "OLSR 閘道器" #: applications/luci-app-olsr/luasrc/view/status-olsr/mid.htm:20 #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:22 msgid "OLSR node" msgstr "OLSR 節點" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:10 #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:19 msgid "Orange" msgstr "橙色" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:157 msgid "Overview" msgstr "概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:87 msgid "Overview of currently active OLSR host net announcements" msgstr "當前活動的 OLSR 主機網路通告概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/neighbors.htm:122 msgid "Overview of currently established OLSR connections" msgstr "當前建立的 OLSR 連線概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/topology.htm:19 msgid "Overview of currently known OLSR nodes" msgstr "當前已知的 OLSR 節點概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/routes.htm:103 msgid "Overview of currently known routes to other OLSR nodes" msgstr "當前已知到其他 OLSR 節點的路由概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:19 msgid "Overview of interfaces where OLSR is running" msgstr "OLSR 正在執行的介面概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/mid.htm:17 msgid "Overview of known multiple interface announcements" msgstr "已知的多介面通告概覽" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:104 msgid "Overview of smart gateways in this network" msgstr "此網路中的智慧閘道器概覽" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:11 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:11 msgid "Plugin configuration" msgstr "外掛配置" #: applications/luci-app-olsr/luasrc/controller/olsr4.lua:29 #: applications/luci-app-olsr/luasrc/controller/olsr6.lua:29 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua:240 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdplugins6.lua:240 msgid "Plugins" msgstr "外掛" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:54 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:48 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05." msgstr "OLSR 套接字的輪詢速率，以秒為單位。預設值為0.05。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:53 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:47 msgid "Pollrate" msgstr "輪詢速率" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:126 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:120 msgid "Port" msgstr "埠" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:38 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:20 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:63 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:115 msgid "Prefix" msgstr "字首" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:11 #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:20 msgid "Red" msgstr "紅色" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrddisplay.lua:9 msgid "Resolve" msgstr "解析" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrddisplay.lua:10 msgid "" "Resolve hostnames on status pages. It is generally safe to allow this, but " "if you use public IPs and have unstable DNS-Setup then those pages will load " "really slow. In this case disable it here." msgstr "" "解析狀態頁面上的主機名。通常允許這樣做是安全的，但如果您使用公共 IP，且具有不" "穩定的 DNS 設定，則這些頁面的載入速度會非常慢。這種情況下，在此禁用它。" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:43 msgid "Routes" msgstr "路由" #: applications/luci-app-olsr/luasrc/view/status-olsr/mid.htm:21 msgid "Secondary OLSR interfaces" msgstr "輔助 OLSR 介面" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:56 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:108 msgid "Selected" msgstr "" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:133 msgid "" "Sets the main IP (originator ip) of the router. This IP will NEVER change " "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the " "IP of the first interface." msgstr "" "設定路由器的主 IP（發起方 IP）。在 olsrd 的正常執行時間內，此 IP 永遠不會改" "變。預設為 0.0.0.0，觸發使用第一個介面的 IP。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:127 msgid "" "Sets the main IP (originator ip) of the router. This IP will NEVER change " "during the uptime of olsrd. Default is ::, which triggers usage of the IP of " "the first interface." msgstr "" "設定路由器的主 IP（發起方 IP）。在 olsrd 的正常執行時間內，此 IP 永遠不會改" "變。預設為 ::，觸發使用第一個介面的 IP。" #: applications/luci-app-olsr/luasrc/view/status-olsr/common_js.htm:20 msgid "Show IPv4" msgstr "顯示 IPv4" #: applications/luci-app-olsr/luasrc/view/status-olsr/common_js.htm:28 msgid "Show IPv6" msgstr "顯示 IPv6" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:14 msgid "Signal Noise Ratio in dB" msgstr "信噪比（dB）" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:64 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:44 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:44 msgid "SmartGW" msgstr "SmartGW" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:97 msgid "SmartGW announcements" msgstr "SmartGW 通告" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:150 msgid "SmartGateway is not configured on this system." msgstr "此係統上未配置 SmartGateway。" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:28 msgid "Source address" msgstr "源位址" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:176 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:170 msgid "" "Specifies the speed of the uplink in kilobits/s. First parameter is " "upstream, second parameter is downstream. Default is \"128 1024\"." msgstr "" "以千位元/秒為單位指定上行鏈路的速度。第一個引數是上傳，第二個引數是下載。預設" "值為“128 1024”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:176 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:170 msgid "Speed of the uplink" msgstr "上行鏈路的速度" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:25 msgid "State" msgstr "狀態" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:19 msgid "Still usable (20 > SNR > 5)" msgstr "仍可使用（20 > SNR > 5）" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:10 msgid "Still usable (4 < ETX < 10)" msgstr "仍可使用（4 < ETX < 10）" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:3 msgid "Success rate of packages received from the neighbour" msgstr "從鄰居收包的成功率" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:4 msgid "Success rate of packages sent to the neighbour" msgstr "向鄰居發包的成功率" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:388 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:369 msgid "TC" msgstr "TC" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:317 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:298 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:141 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:128 msgid "TC interval" msgstr "TC 間隔" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:323 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:304 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:147 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:134 msgid "TC validity time" msgstr "TC 有效時間" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:65 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:59 msgid "TOS value" msgstr "TOS 值" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:13 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:13 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:15 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:15 msgid "" "The OLSR daemon is an implementation of the Optimized Link State Routing " "protocol. As such it allows mesh routing for any network equipment. It runs " "on any wifi card that supports ad-hoc mode and of course on any ethernet " "device. Visit olsrd.org for help and " "documentation." msgstr "" "OLSR 守護程式是優化鏈路狀態路由（Optimized Link State Routing）協議的實現。因" "此，它允許在任何網路裝置上建立網狀路由。它可以在支援 ad-hoc 模式的任何 wifi " "卡上執行，當然也可以在任何乙太網裝置上執行。訪問 olsrd.org 獲取幫助和文件。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:194 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:188 msgid "" "The fixed willingness to use. If not set willingness will be calculated " "dynamically based on battery/power status. Default is \"3\"." msgstr "" "固定的使用意願值。如果未設定，則將根據電池/電源狀態動態計算意願值。預設值" "為“3”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:45 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:45 msgid "The interface OLSRd should serve." msgstr "OLSRd 應該服務的介面。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:127 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:121 msgid "" "The port OLSR uses. This should usually stay at the IANA assigned port 698. " "It can have a value between 1 and 65535." msgstr "" "OLSR 使用的埠。通常應使用 IANA 分配的保留埠698。它的值可以在1到65535之間。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:184 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:178 msgid "" "This can be used to signal the external IPv6 prefix of the uplink to the " "clients. This might allow a client to change it's local IPv6 address to use " "the IPv6 gateway without any kind of address translation. The maximum prefix " "length is 64 bits. Default is \"::/0\" (no prefix)." msgstr "" "這可用於向客戶端通知上行鏈路的外部 IPv6 字首。這可能可使客戶端更改其本地 " "IPv6 位址，以使用 IPv6 閘道器，而無需任何型別的位址轉換。字首長度最大為64位。" "默認為“::/0”（無字首）。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:224 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:218 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:33 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:33 msgid "Timing and Validity" msgstr "時間和有效性" #: applications/luci-app-olsr/luasrc/controller/olsr.lua:48 msgid "Topology" msgstr "拓撲" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:66 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:60 msgid "" "Type of service value for the IP header of control traffic. Default is " "\"16\"." msgstr "IP 流量控制頭的服務型別值。預設值為“16”。" #: applications/luci-app-olsr/luasrc/view/status-olsr/error_olsr.htm:9 msgid "Unable to connect to the OLSR daemon!" msgstr "無法連線到 OLSR 守護程式！" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:59 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:111 msgid "Uplink" msgstr "上行連結" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:166 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:160 msgid "Uplink uses NAT" msgstr "上行連結使用 NAT" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:116 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:110 msgid "Use hysteresis" msgstr "使用滯後" #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:41 #: applications/luci-app-olsr/luasrc/view/status-olsr/hna.htm:92 msgid "Validity Time" msgstr "有效時間" #: applications/luci-app-olsr/luasrc/view/status-olsr/overview.htm:200 msgid "Version" msgstr "版本" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:8 msgid "Very good (ETX < 2)" msgstr "非常好（ETX < 2）" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:17 msgid "Very good (SNR > 30)" msgstr "非常好（SNR > 30）" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:27 msgid "WLAN" msgstr "WLAN" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:44 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:44 msgid "" "Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not " "work, please install it." msgstr "" "警告：未安裝 kmod-ipip。沒有 kmod-ipip，SmartGateway 將無法正常工作，請安裝" "它。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:235 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:229 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:60 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:60 msgid "Weight" msgstr "體重" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:236 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:230 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface.lua:61 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdiface6.lua:61 msgid "" "When multiple links exist between hosts the weight of interface is used to " "determine the link to use. Normally the weight is automatically calculated " "by olsrd based on the characteristics of the interface, but here you can " "specify a fixed value. Olsrd will choose links with the lowest value.
Note: Interface weight is used only when LinkQualityLevel is set to " "0. For any other value of LinkQualityLevel, the interface ETX value is used " "instead." msgstr "" "當主機之間存在多個鏈路時，介面權重用於確定要使用的鏈路。通常，權重由 olsrd 根" "據介面的特性自動計算，但您可以在此處指定固定值。Olsrd 將選擇值最低的連結。" "
注意：僅當 LinkQualityLevel 設定為0時才使用介面權重。" "LinkQualityLevel 的任何其他值都將使用介面的 ETX 值。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155 msgid "" "Which kind of uplink is exported to the other mesh nodes. An uplink is " "detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. " "Default setting is \"both\"." msgstr "" "將匯出哪種上行鏈路到其他網狀節點。通過查詢本地 HNA 0.0.0.0/0、::ffff:0:0/96 " "或 2000::/3 來檢測上行鏈路。預設設定為“兩者”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:149 msgid "" "Which kind of uplink is exported to the other mesh nodes. An uplink is " "detected by looking for a local HNA6 ::ffff:0:0/96 or 2000::/3. Default " "setting is \"both\"." msgstr "" "將匯出哪種上行鏈路到其他網狀節點。通過查詢本地 HNA6 ::ffff:0:0/96 或 " "2000::/3 來檢測上行鏈路。預設設定為“兩者”。" #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:193 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:187 msgid "Willingness" msgstr "意願值" #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:9 #: applications/luci-app-olsr/luasrc/view/status-olsr/legend.htm:18 msgid "Yellow" msgstr "黃色" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:38 msgid "down" msgstr "" #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134 msgid "infinite" msgstr "" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:29 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:34 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:35 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:133 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:138 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:139 msgid "no" msgstr "否" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:38 msgid "up" msgstr "" #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:29 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:34 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:35 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:133 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:138 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:139 msgid "yes" msgstr "是" #~ msgid "Status" #~ msgstr "狀態"