# # Yangfl , 2018. # msgid "" msgstr "" "PO-Revision-Date: 2021-08-14 14:43+0000\n" "Last-Translator: Hulen \n" "Language-Team: Chinese (Traditional) \n" "Language: zh_Hant\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Weblate 4.8-dev\n" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:602 msgid "" "Allow SPA clients to request access to services through an iptables firewall " "instead of just to it." msgstr "容許 SPA 客戶端請求通過 iptables 防火牆存取服務，而不僅僅是被攔截。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:603 msgid "Allow SPA clients to request forwarding destination by DNS name." msgstr "允許 SPA 客戶端用 DNS 名稱請求轉發目標。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:441 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:458 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:551 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:573 msgid "Base64 key" msgstr "Base64 金鑰" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:308 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:319 msgid "Close" msgstr "關閉" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:485 msgid "Custom configuration" msgstr "自定義配置" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:415 msgid "Custom configuration read from /etc/fwknop/access.conf." msgstr "自定義配置從/etc/fwknop/access.conf中讀取。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:581 msgid "" "Define a set of ports and protocols (tcp or udp) that are explicitly not " "allowed regardless of the validity of the incoming SPA packet. Multiple " "entries are comma-separated." msgstr "" "定義一組明確禁止的埠號和協定（tcp或udp），無論傳入SPA封包的有效性如何。多個條" "目以逗號分隔。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:576 msgid "" "Define a set of ports and protocols (tcp or udp) that will be opened if a " "valid knock sequence is seen. If this entry is not set, fwknopd will attempt " "to honor any proto/port request specified in the SPA data (unless of it " "matches any “RESTRICT_PORTS” entries). Multiple entries are comma-separated." msgstr "" "定義一組埠和協議（TCP 或 UDP），如果看到有效的敲門（knock）序列，則開啟這些埠" "和協議。如果未設定此條目，fwknopd 將嘗試遵守 SPA 資料中指定的任何協議/端口請" "求（除非匹配到了任何“RESTRICT_PORTS”條目）。多個條目以逗號分隔。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:562 msgid "" "Define the HMAC authentication key (in Base64 encoding) used for verifying " "the authenticity of the SPA packet before the packet is decrypted." msgstr "" "定義HMAC身份驗證金鑰（採用Base64編碼），用於在解密SPA封包之前驗證該封包的真實" "性。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:554 msgid "" "Define the HMAC authentication key used for verifying the authenticity of " "the SPA packet before the packet is decrypted." msgstr "定義HMAC身份驗證金鑰，用於在解密SPA封包之前驗證該封包的真實性。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:585 msgid "" "Define the length of time access will be granted by fwknopd through the " "firewall after a valid knock sequence from a source IP address. If " "“FW_ACCESS_TIMEOUT” is not set then the default timeout of 30 seconds will " "automatically be set." msgstr "" "定義在取得源 IP 位址的有效敲門序列後，fwknopd 允許通過防火牆存取的「時間長" "度」。如果未設定 “FW_ACCESS_TIMEOUT”，將自動設定逾時 30 秒為預設值。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:540 msgid "" "Define the symmetric key (in Base64 encoding) used for decrypting an " "incoming SPA packet that is encrypted by the fwknop client with Rijndael." msgstr "" "定義對稱金鑰（採用Base64編碼），該對稱金鑰用於解密由fwknop客戶端使用Rijndael" "加密的傳入SPA封包。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:532 msgid "" "Define the symmetric key used for decrypting an incoming SPA packet that is " "encrypted by the fwknop client with Rijndael." msgstr "" "定義 Rijndael 對稱金鑰，將用於解密由 fwknop 客戶端傳入的加密 SPA 資料包。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:480 msgid "Enable Uci/Luci control" msgstr "啟用 Uci/Luci 控制元件" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:482 msgid "Enable config overwrite" msgstr "啟用配置覆蓋" #: applications/luci-app-fwknopd/root/usr/share/luci/menu.d/luci-app-fwknopd.json:3 msgid "Firewall Knock Daemon" msgstr "Firewall Knock 守護程式" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:303 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:314 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:478 msgid "Firewall Knock Operator Daemon" msgstr "防火牆敲門操作員常駐服務" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:590 msgid "" "Force all SPA packets to contain a real IP address within the encrypted " "data. This makes it impossible to use the -s command line argument on the " "fwknop client command line, so either -R has to be used to automatically " "resolve the external address (if the client behind a NAT) or the client must " "know the external IP and set it via the -a argument." msgstr "" "強制所有 SPA 資料包在加密資料中包含真實 IP 位址。這使得無法在 fwknop 客戶端命" "令行上使用 -s 指令列引數，因此 -R 必須用於自動解析外部位址（如果 NAT 後面的客" "戶端）,或客戶端必須通過 -a 引數知道外部 IP。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:527 msgid "Generate Keys" msgstr "產生金鑰" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:523 msgid "Generate keys" msgstr "產生金鑰" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:523 msgid "" "Generates the symmetric key used for decrypting an incoming SPA packet, that " "is encrypted by the fwknop client with Rijndael block cipher, and HMAC " "authentication key used to verify the authenticity of the incoming SPA " "packet before the packet is decrypted." msgstr "" "生成用於解密傳入SPA封包的對稱金鑰，該對稱金鑰由fwknop客戶端使用Rijndael區塊密" "碼進行加密，以及生成HMAC身份驗證金鑰，用於在解密該SPA消息之前驗證傳入SPA封包" "的真實性。" #: applications/luci-app-fwknopd/root/usr/share/rpcd/acl.d/luci-app-fwknopd.json:3 msgid "Grant UCI access for luci-app-fwknopd" msgstr "授予 luci-app-fwknopd 擁有 UCI 存取的權限" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:571 msgid "HMAC key type" msgstr "HMAC金鑰類型" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:549 msgid "Key type" msgstr "金鑰類型" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:178 msgid "Loading…" msgstr "載入中…" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:600 msgid "" "Maximum age in seconds that an SPA packet will be accepted. Defaults to 120 " "seconds." msgstr "SPA封包將被接受的最大期限（以秒為單位）。默認為120秒。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:494 msgid "Network" msgstr "網路" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:492 msgid "Network configuration" msgstr "網絡配置" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:315 msgid "No stanza found." msgstr "找不到節。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:440 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:457 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:550 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:572 msgid "Normal key" msgstr "普通金鑰" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:485 msgid "" "Parses the /etc/fwknop/access.conf file (and included files/folders/keys) " "and generates QR codes for all found stanzas. Handles only files in /etc/" "fwknop folder due to access rights restrictions." msgstr "" "解析 /etc/fwknop/access.conf 檔案（以及包含的檔案／資料夾／金鑰），並為所有找" "到的節生成 QR 碼。由於存取權限的限制，僅處理 /etc/fwknop 資料夾中的檔案。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:422 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:506 msgid "QR code" msgstr "QR 二維條碼" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:489 msgid "Show access.conf QR codes" msgstr "顯示access.conf QR二維條碼" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:601 msgid "Specify the ethernet interface on which fwknopd will sniff packets." msgstr "指定 fwknopd 將要嗅探資料包的乙太網介面。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:447 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:453 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:559 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:568 msgid "The HMAC authentication key has to be specified." msgstr "必須指定HMAC身份驗證金鑰。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:517 msgid "" "The destination address for which the SPA packet will be accepted. The " "string “ANY” is also accepted if a valid SPA packet should be honored to any " "destination IP. Networks should be specified in CIDR notation (e.g. " "“192.168.10.0/24”), and individual IP addresses can be specified as well. " "Multiple entries are comma-separated." msgstr "" "SPA封包將被接受的目標位址。如果有效的SPA封包應遵循任何目標IP，則也接受字符" "串“ ANY”。應該以CIDR表示法指定網絡（例如 “ 192.168.10.0/24”），也可以指定單個" "IP地址。多個條目以逗號分隔。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:494 msgid "" "The network on which the daemon listens. The daemon is automatically started " "when the network is up-and-running. This option has precedence over " "“PCAP_INTF” option." msgstr "" "常駐服務監聽的網絡。網絡啟動並運行時，常駐服務會自動啟動。此選項優先於“ " "PCAP_INTF”選項。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:508 msgid "" "The source address from which the SPA packet will be accepted. The string " "“ANY” is also accepted if a valid SPA packet should be honored from any " "source IP. Networks should be specified in CIDR notation (e.g. " "“192.168.10.0/24”), and individual IP addresses can be specified as well. " "Multiple entries are comma-separated." msgstr "" "將接受SPA封包的來源位址。如果應該從任何來源IP接受有效的SPA封包，則也接受字" "符“ANY”。應該以CIDR表示法指定網絡（例如“ 192.168.10.0/24”），也可以指定單個IP" "地址。多個條目以逗號分隔。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:514 msgid "The source address has to be specified." msgstr "必須指定來源地址。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:430 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:436 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:537 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:546 msgid "The symmetric key has to be specified." msgstr "必須指定對稱金鑰。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:594 msgid "" "This instructs fwknopd to accept complete commands that are contained within " "an authorization packet. Any such command will be executed on the fwknopd " "server as the user specified by the “CMD_EXEC_USER” or as the user that " "started fwknopd if that is not set." msgstr "" "這指示 fwknopd 接受包含在授權封包中的完整命令。任何這樣的命令都將在 fwknopd 伺服器上以「CMD_EXEC_USER」指定的使用者或啟動 " "fwknopd 的使用者 (如果沒有設定的話) 的身份執行。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:482 msgid "" "When unchecked, the config files in /etc/fwknopd will be used as is, " "ignoring any settings here." msgstr "" "取消選中時，/etc/fwknopd 中的配置檔案將按原樣使用，忽略此處的任何設定。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:419 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:502 msgid "access.conf stanzas" msgstr "access.conf 節" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:598 msgid "fwknopd.conf config options" msgstr "fwknopd.conf 配置選項" #~ msgid "Firewall Knock Operator" #~ msgstr "Firewall Knock 操作者" #~ msgid "The Base64 HMAC key" #~ msgstr "base64 HMAC 金鑰" #~ msgid "Use ANY for any source IP" #~ msgstr "對任何源 IP 使用 ANY"