# # Yangfl , 2018. # msgid "" msgstr "" "PO-Revision-Date: 2021-05-04 07:40+0000\n" "Last-Translator: Eric \n" "Language-Team: Chinese (Simplified) \n" "Language: zh_Hans\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Weblate 4.7-dev\n" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:602 msgid "" "Allow SPA clients to request access to services through an iptables firewall " "instead of just to it." msgstr "允许 SPA 客户端请求通过 iptables 防火墙访问服务，而不仅仅是被拦截。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:603 msgid "Allow SPA clients to request forwarding destination by DNS name." msgstr "允许 SPA 客户端用 DNS 名称请求转发目标。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:441 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:458 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:551 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:573 msgid "Base64 key" msgstr "Base64 密钥" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:308 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:319 msgid "Close" msgstr "关闭" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:485 msgid "Custom configuration" msgstr "自定义配置" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:415 msgid "Custom configuration read from /etc/fwknop/access.conf." msgstr "从 /etc/fwknop/access.conf 读取自定义配置." #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:581 msgid "" "Define a set of ports and protocols (tcp or udp) that are explicitly not " "allowed regardless of the validity of the incoming SPA packet. Multiple " "entries are comma-separated." msgstr "" "定义一组端口和协议(tcp或udp)，无论传入的SPA包的有效性如何，都明确不允许这些端" "口和协议。用英文逗号分隔多个条目。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:576 msgid "" "Define a set of ports and protocols (tcp or udp) that will be opened if a " "valid knock sequence is seen. If this entry is not set, fwknopd will attempt " "to honor any proto/port request specified in the SPA data (unless of it " "matches any “RESTRICT_PORTS” entries). Multiple entries are comma-separated." msgstr "" "定义一组端口和协议（TCP 或 UDP），如果看到有效的敲门（knock）序列，则打开这些" "端口和协议。如果未设置此条目，fwknopd 将尝试遵守 SPA 数据中指定的任何协议/端" "口请求（除非匹配到了任何“RESTRICT_PORTS”条目）。多个条目以逗号分隔。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:562 msgid "" "Define the HMAC authentication key (in Base64 encoding) used for verifying " "the authenticity of the SPA packet before the packet is decrypted." msgstr "" "定义HMAC认证密钥(使用Base64编码)，用于在数据包解密之前验证SPA数据包的真实性。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:554 msgid "" "Define the HMAC authentication key used for verifying the authenticity of " "the SPA packet before the packet is decrypted." msgstr "定义HMAC认证密钥，用于在数据包被解密之前验证SPA数据包的真实性。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:585 msgid "" "Define the length of time access will be granted by fwknopd through the " "firewall after a valid knock sequence from a source IP address. If " "“FW_ACCESS_TIMEOUT” is not set then the default timeout of 30 seconds will " "automatically be set." msgstr "" "定义在源 IP 地址的有效敲门序列后，fwknopd 授予其通过防火墙访问的时间长度。如" "果未设置“FW_ACCESS_TIMEOUT”，则将自动设置默认超时 30 秒。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:540 msgid "" "Define the symmetric key (in Base64 encoding) used for decrypting an " "incoming SPA packet that is encrypted by the fwknop client with Rijndael." msgstr "" "定义对称密钥(以Base64编码方式)，用于解密由fwknop客户机使用Rijndael加密的传入" "SPA包。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:532 msgid "" "Define the symmetric key used for decrypting an incoming SPA packet that is " "encrypted by the fwknop client with Rijndael." msgstr "" "定义 Rijndael 对称密钥，将用于解密由 fwknop 客户端传入的加密 SPA 数据包。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:480 msgid "Enable Uci/Luci control" msgstr "启用 Uci/Luci 控件" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:482 msgid "Enable config overwrite" msgstr "启用配置覆盖" #: applications/luci-app-fwknopd/root/usr/share/luci/menu.d/luci-app-fwknopd.json:3 msgid "Firewall Knock Daemon" msgstr "Firewall Knock 守护进程" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:303 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:314 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:478 msgid "Firewall Knock Operator Daemon" msgstr "防火墙Knock Operator守护进程" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:590 msgid "" "Force all SPA packets to contain a real IP address within the encrypted " "data. This makes it impossible to use the -s command line argument on the " "fwknop client command line, so either -R has to be used to automatically " "resolve the external address (if the client behind a NAT) or the client must " "know the external IP and set it via the -a argument." msgstr "" "强制所有 SPA 数据包在加密数据中包含真实 IP 地址。这使得无法在 fwknop 客户端命" "令行上使用 -s 命令行参数，因此 -R 必须用于自动解析外部地址（如果 NAT 后面的客" "户端），或客户端必须通过 -a 参数知道外部 IP。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:527 msgid "Generate Keys" msgstr "生成密钥" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:523 msgid "Generate keys" msgstr "生成多个密钥" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:523 msgid "" "Generates the symmetric key used for decrypting an incoming SPA packet, that " "is encrypted by the fwknop client with Rijndael block cipher, and HMAC " "authentication key used to verify the authenticity of the incoming SPA " "packet before the packet is decrypted." msgstr "" "生成用于解密传入SPA包的对称密钥，该密钥由fwknop客户端使用Rijndael块密码加密，" "以及用于在解密数据包前验证传入SPA包的真实性的HMAC身份验证密钥。" #: applications/luci-app-fwknopd/root/usr/share/rpcd/acl.d/luci-app-fwknopd.json:3 msgid "Grant UCI access for luci-app-fwknopd" msgstr "授予UCI访问luci-app-fwknopd的权限" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:571 msgid "HMAC key type" msgstr "HMAC 密钥类型" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:549 msgid "Key type" msgstr "密钥类型" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:178 msgid "Loading…" msgstr "载入中…" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:600 msgid "" "Maximum age in seconds that an SPA packet will be accepted. Defaults to 120 " "seconds." msgstr "SPA 数据包可被接受的最大期限（以秒为单位）。默认为120秒。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:494 msgid "Network" msgstr "网络" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:492 msgid "Network configuration" msgstr "网络配置" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:315 msgid "No stanza found." msgstr "没有找到 stanza。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:440 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:457 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:550 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:572 msgid "Normal key" msgstr "普通密钥" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:485 msgid "" "Parses the /etc/fwknop/access.conf file (and included files/folders/keys) " "and generates QR codes for all found stanzas. Handles only files in /etc/" "fwknop folder due to access rights restrictions." msgstr "" "解析/etc/fwknop/access.conf文件(以及包含的文件/文件夹/密钥)并为所有找到的" "stanzas生成二维码。由于访问权限的限制，只能处理/etc/fwknop文件夹中的文件。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:422 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:506 msgid "QR code" msgstr "QR码" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:489 msgid "Show access.conf QR codes" msgstr "显示 access.conf 二维码" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:601 msgid "Specify the ethernet interface on which fwknopd will sniff packets." msgstr "指定 fwknopd 将要嗅探数据包的以太网接口。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:447 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:453 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:559 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:568 msgid "The HMAC authentication key has to be specified." msgstr "必须指定HMAC验证密钥。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:517 msgid "" "The destination address for which the SPA packet will be accepted. The " "string “ANY” is also accepted if a valid SPA packet should be honored to any " "destination IP. Networks should be specified in CIDR notation (e.g. " "“192.168.10.0/24”), and individual IP addresses can be specified as well. " "Multiple entries are comma-separated." msgstr "" "接受SPA包的目的地址。如果一个有效的SPA包应该被任意目的地IP接受，字符串“ANY”也" "被接受。网络应该用CIDR符号指定(例如“192.168.10.0/24”)，也可以通过单独的IP地址" "进行指定。用英文逗号分隔多个条目。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:494 msgid "" "The network on which the daemon listens. The daemon is automatically started " "when the network is up-and-running. This option has precedence over " "“PCAP_INTF” option." msgstr "" "守护进程侦听的网络。当网络启动并运行时，守护进程将被自动启动。此选项的优先级" "高于“PCAP_INTF”选项。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:508 msgid "" "The source address from which the SPA packet will be accepted. The string " "“ANY” is also accepted if a valid SPA packet should be honored from any " "source IP. Networks should be specified in CIDR notation (e.g. " "“192.168.10.0/24”), and individual IP addresses can be specified as well. " "Multiple entries are comma-separated." msgstr "" "SPA包被接受的源地址。如果接受来自任意源IP的有效SPA包，字符串“ANY”也被接受。网" "络应该用CIDR符号中指定(例如“192.168.10.0/24”)，也可以通过单独的IPI地址进行指" "定。用英文逗号分隔多个条目。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:514 msgid "The source address has to be specified." msgstr "必须指定源地址。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:430 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:436 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:537 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:546 msgid "The symmetric key has to be specified." msgstr "必须指定对称密钥。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:594 msgid "" "This instructs fwknopd to accept complete commands that are contained within " "an authorization packet. Any such command will be executed on the fwknopd " "server as the user specified by the “CMD_EXEC_USER” or as the user that " "started fwknopd if that is not set." msgstr "" "这指示fwknopd接受包含在授权包中的完整命令。任何这样的命令都将在fwknopd服务器上以“CMD_EXEC_USER”指定的用户或启动fwknopd" "的用户(如果没有设置的话)的身份执行。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:482 msgid "" "When unchecked, the config files in /etc/fwknopd will be used as is, " "ignoring any settings here." msgstr "" "取消选中时，/etc/fwknopd 中的配置文件将按原样使用，忽略此处的任何设置。" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:419 #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:502 msgid "access.conf stanzas" msgstr "access.conf 节" #: applications/luci-app-fwknopd/htdocs/luci-static/resources/view/fwknopd.js:598 msgid "fwknopd.conf config options" msgstr "fwknopd.conf 配置选项" #~ msgid "Firewall Knock Operator" #~ msgstr "Firewall Knock 操作者" #~ msgid "The Base64 HMAC key" #~ msgstr "base64 HMAC 密钥" #~ msgid "Use ANY for any source IP" #~ msgstr "对任何源 IP 使用 ANY"