-- Copyright 2017-2018 Stan Grishin <stangri@melmac.net>
-- Licensed to the public under the Apache License 2.0.

module("luci.controller.advanced_reboot", package.seeall)

local util = require "luci.util"
local fs = require "nixio.fs"
local sys = require "luci.sys"
local http = require "luci.http"
local dispatcher = require "luci.dispatcher"
local i18n = require "luci.i18n"
local ltemplate = require "luci.template"
local ip = require "luci.ip"
local http = require "luci.http"
local sys = require "luci.sys"
local dispatcher = require "luci.dispatcher"
local uci = require "luci.model.uci".cursor()

function is_alt_mountable(p1_mtd, p2_mtd)
	if p1_mtd:sub(1,3) == "mtd" and
				 p2_mtd:sub(1,3) == "mtd" and
				 fs.access("/usr/sbin/ubiattach") and
				 fs.access("/usr/sbin/ubiblock") and 
				 fs.access("/bin/mount") then
		return true
	else
		return false
	end
end

function get_partition_os_info(op_ubi)
	local cp_info, ap_info
	if fs.access("/etc/os-release") then
		cp_info = util.trim(util.exec('. /etc/os-release && echo "$PRETTY_NAME"'))
	end
	alt_partition_unmount(op_ubi)
	alt_partition_mount(op_ubi)
	if fs.access("/alt/rom/etc/os-release") then
		ap_info = util.trim(util.exec('. /alt/rom/etc/os-release && echo "$PRETTY_NAME"'))
	end
	alt_partition_unmount(op_ubi)
	return cp_info, ap_info
end

function alt_partition_mount(op_ubi)
	local ubi_dev
	util.exec('for i in rom overlay firmware; do [ ! -d "$i" ] && mkdir -p "/alt/${i}"; done')
	ubi_dev = tostring(util.exec("ubiattach -m " .. tostring(op_ubi)))
	_, _, ubi_dev = ubi_dev:find("UBI device number (%d+)")
	if not ubi_dev then 
		util.exec("ubidetach -m " .. tostring(op_ubi))
		return 
	end
	util.exec("ubiblock --create /dev/ubi" .. ubi_dev .. "_0")
	util.exec("mount -t squashfs -o ro /dev/ubiblock" .. ubi_dev .. "_0 /alt/rom")
	util.exec("mount -t ubifs /dev/ubi" .. ubi_dev .. "_1 /alt/overlay")
--	util.exec("mount -t overlay overlay -o noatime,lowerdir=/alt/rom,upperdir=/alt/overlay/upper,workdir=/alt/overlay/work /alt/firmware")
end

function alt_partition_unmount(op_ubi)
--	util.exec("[ -d /alt/firmware ] && umount /alt/firmware")
	util.exec("[ -d /alt/overlay ] && umount /alt/overlay")
	util.exec("[ -d /alt/rom ] && umount /alt/rom")
	for i = 0, 10 do
		if not fs.access("/sys/devices/virtual/ubi/ubi" .. tostring(i) .. "/mtd_num") then break end
		ubi_mtd =  tonumber(util.trim(util.exec("cat /sys/devices/virtual/ubi/ubi" .. i .. "/mtd_num")))
		if ubi_mtd and ubi_mtd == op_ubi then
			util.exec("ubiblock --remove /dev/ubi" .. tostring(i) .. "_0")
			util.exec("ubidetach -m " .. tostring(op_ubi))
			util.exec('rm -rf /alt')
		end
	end
end

devices = {
	-- deviceName, boardName, part1MTD, part2MTD, offset, envVar1, envVar1Value1, envVar1Value2, envVar2, envVar2Value1, envVar2Value2
	{"Linksys EA3500", "linksys-audi", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys E4200v2/EA4500", "linksys-viper", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys EA6350v3", "linksys-ea6350v3", "mtd10", "mtd12", 192, "boot_part", 1, 2},
	{"Linksys EA8300", "linksys-ea8300", "mtd10", "mtd12", 192, "boot_part", 1, 2},
	{"Linksys EA8500", "ea8500", "mtd13", "mtd15", 32, "boot_part", 1, 2},
--  {"Linksys EA9500", "linksys-panamera", "mtd3", "mtd6", 28, "boot_part", 1, 2},
	{"Linksys WRT1200AC", "linksys-caiman", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys WRT1900AC", "linksys-mamba", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys WRT1900ACv2", "linksys-cobra", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys WRT1900ACS", "linksys-shelby", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys WRT3200ACM", "linksys-rango", "mtd5", "mtd7", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"Linksys WRT32X", "linksys-venom", "mtd5", "mtd7", nil, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
	{"ZyXEL NBG6817", "nbg6817", "mmcblk0p4", "mmcblk0p7", 32, nil, 255, 1}
}

-- local errorMessage, d
-- local device_name, p1_mtd, p2_mtd, offset, bev1, bev1p1, bev1p2, bev2, bev2p1, bev2p2
romBoardName = util.trim(util.exec("cat /tmp/sysinfo/board_name"))

for i=1, #devices do
	d = devices[i][2]:gsub('%p','')
	if romBoardName and romBoardName:gsub('%p',''):match(d) then
		device_name = devices[i][1]
		p1_mtd = devices[i][3] or nil
		p2_mtd = devices[i][4] or nil
		offset = devices[i][5] or nil
		bev1 = devices[i][6] or nil
		bev1p1 = tonumber(devices[i][7]) or nil
		bev1p2 = tonumber(devices[i][8]) or nil
		bev2 = devices[i][9] or nil
		bev2p1 = devices[i][10] or nil
		bev2p2 = devices[i][11] or nil
		if p1_mtd and offset then
			p1_label = util.trim(util.exec("dd if=/dev/" .. p1_mtd .. " bs=1 skip=" .. offset .. " count=128" .. "  2>/dev/null"))
			n, p1_version = p1_label:match('(Linux)-([%d|.]+)')
		end
		if p2_mtd and offset then
			p2_label = util.trim(util.exec("dd if=/dev/" .. p2_mtd .. " bs=1 skip=" .. offset .. " count=128" .. "  2>/dev/null"))
			n, p2_version = p2_label:match('(Linux)-([%d|.]+)')
		end
		if p1_label and p1_label:find("LEDE") then p1_os = "LEDE" end
		if p1_label and p1_label:find("OpenWrt") then p1_os = "OpenWrt" end
		if p1_label and p1_label:find("Linksys") then p1_os = "Linksys" end
		if p2_label and p2_label:find("LEDE") then p2_os = "LEDE" end
		if p2_label and p2_label:find("OpenWrt") then p2_os = "OpenWrt" end
		if p2_label and p2_label:find("Linksys") then p2_os = "Linksys" end
		if device_name == "ZyXEL NBG6817" then
			if not p1_os then p1_os = "ZyXEL" end
			if not p2_os then p2_os = "ZyXEL" end
		end
		if device_name == "Linksys WRT32X" then
			if not p1_os then p1_os = "Unknown/Compressed" end
			if not p2_os then p2_os = "Unknown/Compressed" end
		end
		if not p1_os then p1_os = "Unknown" end
		if not p2_os then p2_os = "Unknown" end
		if p1_os and p1_version then p1_os = p1_os .. " (Linux " .. p1_version .. ")" end
		if p2_os and p2_version then p2_os = p2_os .. " (Linux " .. p2_version .. ")" end

		if device_name == "ZyXEL NBG6817" then
			if not zyxelFlagPartition then zyxelFlagPartition = util.trim(util.exec(". /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
			if not zyxelFlagPartition then
				errorMessage = errorMessage or "" .. i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
				util.perror(i18n.translate("Unable to find Dual Boot Flag Partition."))
			else
				current_partition = tonumber(util.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
			end
		else
			if fs.access("/usr/sbin/fw_printenv") and fs.access("/usr/sbin/fw_setenv") then
				current_partition = tonumber(util.trim(util.exec("fw_printenv -n " .. bev1)))
			end
		end
		other_partition = current_partition == bev1p2 and bev1p1 or bev1p2
		
		if is_alt_mountable(p1_mtd, p2_mtd) then
			if current_partition == bev1p1 then
				op_ubi = tonumber(p2_mtd:sub(4)) + 1
			else
				op_ubi = tonumber(p1_mtd:sub(4)) + 1
			end
			local cp_info, ap_info = get_partition_os_info(op_ubi)
			if current_partition == bev1p1 then
				p1_os = cp_info or p1_os
				p2_os = ap_info or p2_os
			else
				p1_os = ap_info or p1_os
				p2_os = cp_info or p2_os
			end
		end
	end
end

function index()
	entry({"admin", "system", "advanced_reboot"}, template("advanced_reboot/advanced_reboot"), _("Advanced Reboot"), 90)
	entry({"admin", "system", "advanced_reboot", "reboot"}, post("action_reboot"))
	entry({"admin", "system", "advanced_reboot", "alternative_reboot"}, post("action_altreboot"))
	entry({"admin", "system", "advanced_reboot", "power_off"}, post("action_poweroff"))
end

function action_reboot()
	ltemplate.render("advanced_reboot/applyreboot", {
				title = i18n.translate("Rebooting..."),
				msg   = i18n.translate("The system is rebooting now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
				addr  = ip.new(type(ip) == "string" and ip or "192.168.1.1") or "192.168.1.1"
			})
	sys.reboot()
end

function action_altreboot()
	local zyxelFlagPartition, zyxelBootFlag, zyxelNewBootFlag, errorCode, curEnvSetting, newEnvSetting
	errorMessage = nil
	errorCode = 0
	if http.formvalue("cancel") then
		http.redirect(dispatcher.build_url('admin/system/advanced_reboot'))
		return
	end
	local step = tonumber(http.formvalue("step") or 1)
	if step == 1 then
		if fs.access("/usr/sbin/fw_printenv") and fs.access("/usr/sbin/fw_setenv") then
			ltemplate.render("advanced_reboot/alternative_reboot",{})
		else
			ltemplate.render("advanced_reboot/advanced_reboot",{errorMessage = i18n.translate("No access to fw_printenv or fw_printenv!")})
		end
	elseif step == 2 then
		if bev1 or bev2 then -- Linksys devices
			if bev1 then
				curEnvSetting = tonumber(util.trim(util.exec("fw_printenv -n " .. bev1)))
				if not curEnvSetting then
					errorMessage = errorMessage .. i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev1 .. ". "
					util.perror(i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev1 .. ".")
				else
					newEnvSetting = curEnvSetting == bev1p1 and bev1p2 or bev1p1
					errorCode = sys.call("fw_setenv " .. bev1 .. " " .. newEnvSetting)
						if errorCode ~= 0 then
							errorMessage = errorMessage or "" .. i18n.translate("Unable to set firmware environment variable") .. ": " .. bev1 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ". "
							util.perror(i18n.translate("Unable to set firmware environment variable") .. ": " .. bev1 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ".")
						end
				end
			end
			if bev2 then
				curEnvSetting = util.trim(util.exec("fw_printenv -n " .. bev2))
				if not curEnvSetting then
					errorMessage = errorMessage or "" .. i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev2 .. ". "
					util.perror(i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev2 .. ".")
				else
					newEnvSetting = curEnvSetting == bev2p1 and bev2p2 or bev2p1
					errorCode = sys.call("fw_setenv " .. bev2 .. " '" .. newEnvSetting .. "'")
					if errorCode ~= 0 then
						errorMessage = errorMessage or "" .. i18n.translate("Unable to set firmware environment variable") .. ": " .. bev2 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ". "
						util.perror(i18n.translate("Unable to set firmware environment variable") .. ": " .. bev2 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ".")
					end
				end
			end
		else -- NetGear device
			if not zyxelFlagPartition then zyxelFlagPartition = util.trim(util.exec(". /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
			if not zyxelFlagPartition then
				errorMessage = errorMessage .. i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
				util.perror(i18n.translate("Unable to find Dual Boot Flag Partition."))
			else
				zyxelBootFlag = tonumber(util.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
				zyxelNewBootFlag = zyxelBootFlag and zyxelBootFlag == 1 and "\\xff" or "\\x01"
				if zyxelNewBootFlag then
					errorCode = sys.call("printf \"" .. zyxelNewBootFlag .. "\" >" .. zyxelFlagPartition )
					if errorCode ~= 0 then
						errorMessage = errorMessage or "" .. i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ". "
						util.perror(i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ".")
					end
				end
			end
		end
		if not errorMessage then
			ltemplate.render("advanced_reboot/applyreboot", {
						title = i18n.translate("Rebooting..."),
						msg   = i18n.translate("The system is rebooting to an alternative partition now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
						addr  = ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
					})
			sys.reboot()
		else
			ltemplate.render("advanced_reboot/advanced_reboot",{
				romBoardName=romBoardName,
				device_name=device_name,
				bev1p1=bev1p1,
				p1_os=p1_os,
				bev1p2=bev1p2,
				p2_os=p2_os,
				current_partition=current_partition,
				errorMessage = errorMessage})
		end
	end
end

function action_poweroff()
	local uci = require "luci.model.uci".cursor()
	if http.formvalue("cancel") then
		http.redirect(dispatcher.build_url('admin/system/advanced_reboot'))
		return
	end
	local step = tonumber(http.formvalue("step") or 1)
	if step == 1 then
		if fs.access("/sbin/poweroff") then
			ltemplate.render("advanced_reboot/power_off",{})
		else
			ltemplate.render("advanced_reboot/advanced_reboot",{})
		end
	elseif step == 2 then
		ltemplate.render("advanced_reboot/applyreboot", {
					title = i18n.translate("Shutting down..."),
					msg   = i18n.translate("The system is shutting down now.<br /> DO NOT POWER OFF THE DEVICE!<br /> It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
					addr  = ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
				})
		sys.call("/sbin/poweroff")
	end
end