From 1ffe61277e656943128cafc70e35ee05669d1cce Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Tue, 11 Oct 2011 02:07:15 +0000 Subject: move protocol support into a new protocols/ subdir --- .../3g/luasrc/model/cbi/admin_network/proto_3g.lua | 152 +++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 protocols/3g/luasrc/model/cbi/admin_network/proto_3g.lua (limited to 'protocols/3g/luasrc/model/cbi') diff --git a/protocols/3g/luasrc/model/cbi/admin_network/proto_3g.lua b/protocols/3g/luasrc/model/cbi/admin_network/proto_3g.lua new file mode 100644 index 0000000000..f14434dd82 --- /dev/null +++ b/protocols/3g/luasrc/model/cbi/admin_network/proto_3g.lua @@ -0,0 +1,152 @@ +--[[ +LuCI - Lua Configuration Interface + +Copyright 2011 Jo-Philipp Wich + +Licensed under the Apache License, Version 2.0 (the "License"); +you may not use this file except in compliance with the License. +You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 +]]-- + +local map, section, net = ... + +local device, apn, service, pincode, username, password +local ipv6, maxwait, defaultroute, metric, peerdns, dns, + keepalive_failure, keepalive_interval, demand + + +device = section:taboption("general", Value, "device", translate("Modem device")) +device.rmempty = false + +local device_suggestions = nixio.fs.glob("/dev/tty[A-Z]*") + or nixio.fs.glob("/dev/tts/*") + +if device_suggestions then + local node + for node in device_suggestions do + device:value(node) + end +end + + +service = section:taboption("general", Value, "service", translate("Service Type")) +service:value("", translate("-- Please choose --")) +service:value("umts", "UMTS/GPRS") +service:value("cdma", "CDMA") +service:value("evdo", "EV-DO") + + +apn = section:taboption("general", Value, "apn", translate("APN")) + + +pincode = section:taboption("general", Value, "pincode", translate("PIN")) +pincode.datatype = "range(0,9999)" + + +username = section:taboption("general", Value, "username", translate("PAP/CHAP username")) + + +password = section:taboption("general", Value, "password", translate("PAP/CHAP password")) +password.password = true + + +if luci.model.network:has_ipv6() then + + ipv6 = section:taboption("advanced", Flag, "ipv6", + translate("Enable IPv6 negotiation on the PPP link")) + + ipv6.default = ipv6.disabled + +end + + +maxwait = section:taboption("advanced", Value, "maxwait", + translate("Modem init timeout"), + translate("Maximum amount of seconds to wait for the modem to become ready")) + +maxwait.placeholder = "20" +maxwait.datatype = "min(1)" + + +defaultroute = section:taboption("advanced", Flag, "defaultroute", + translate("Use default gateway"), + translate("If unchecked, no default route is configured")) + +defaultroute.default = defaultroute.enabled + + +metric = section:taboption("advanced", Value, "metric", + translate("Use gateway metric")) + +metric.placeholder = "0" +metric.datatype = "uinteger" +metric:depends("defaultroute", defaultroute.enabled) + + +peerdns = section:taboption("advanced", Flag, "peerdns", + translate("Use DNS servers advertised by peer"), + translate("If unchecked, the advertised DNS server addresses are ignored")) + +peerdns.default = peerdns.enabled + + +dns = section:taboption("advanced", DynamicList, "dns", + translate("Use custom DNS servers")) + +dns:depends("peerdns", "") +dns.datatype = "ipaddr" + + +keepalive_failure = section:taboption("advanced", Value, "_keepalive_failure", + translate("LCP echo failure threshold"), + translate("Presume peer to be dead after given amount of LCP echo failures, use 0 to ignore failures")) + +function keepalive_failure.cfgvalue(self, section) + local v = m:get(section, "keepalive") + if v and #v > 0 then + return tonumber(v:match("^(%d+)[ ,]+%d+") or v) + end +end + +function keepalive_failure.write() end +function keepalive_failure.remove() end + +keepalive_failure.placeholder = "0" +keepalive_failure.datatype = "uinteger" + + +keepalive_interval = section:taboption("advanced", Value, "_keepalive_interval", + translate("LCP echo interval"), + translate("Send LCP echo requests at the given interval in seconds, only effective in conjunction with failure threshold")) + +function keepalive_interval.cfgvalue(self, section) + local v = m:get(section, "keepalive") + if v and #v > 0 then + return tonumber(v:match("^%d+[ ,]+(%d+)")) + end +end + +function keepalive_interval.write(self, section, value) + local f = tonumber(keepalive_failure:formvalue(section)) or 0 + local i = tonumber(value) or 5 + if i < 1 then i = 1 end + if f > 0 then + m:set(section, "keepalive", "%d %d" %{ f, i }) + else + m:del(section, "keepalive") + end +end + +keepalive_interval.remove = keepalive_interval.write +keepalive_interval.placeholder = "5" +keepalive_interval.datatype = "min(1)" + + +demand = section:taboption("advanced", Value, "demand", + translate("Inactivity timeout"), + translate("Close inactive connection after the given amount of seconds, use 0 to persist connection")) + +demand.placeholder = "0" +demand.datatype = "uinteger" -- cgit v1.2.3