From ce6aec0a91e65b16cf42d9f908e06b63d91be931 Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Tue, 19 May 2009 02:35:25 +0000 Subject: i18n: remove obsolete lua i18n files --- i18n/english/luasrc/i18n/admin-core.en.lua | 412 ----------------------------- i18n/english/luasrc/i18n/cbi.en.lua | 17 -- i18n/english/luasrc/i18n/default.en.lua | 104 -------- i18n/english/luasrc/i18n/sysauth.en.lua | 3 - i18n/english/luasrc/i18n/wifi.en.lua | 39 --- 5 files changed, 575 deletions(-) delete mode 100644 i18n/english/luasrc/i18n/admin-core.en.lua delete mode 100644 i18n/english/luasrc/i18n/cbi.en.lua delete mode 100644 i18n/english/luasrc/i18n/default.en.lua delete mode 100644 i18n/english/luasrc/i18n/sysauth.en.lua delete mode 100644 i18n/english/luasrc/i18n/wifi.en.lua (limited to 'i18n/english') diff --git a/i18n/english/luasrc/i18n/admin-core.en.lua b/i18n/english/luasrc/i18n/admin-core.en.lua deleted file mode 100644 index 61c038ff7..000000000 --- a/i18n/english/luasrc/i18n/admin-core.en.lua +++ /dev/null @@ -1,412 +0,0 @@ -uci_applied = 'The following changes have been applied' -uci_reverted = 'The following changes have been reverted' -a_i_ui = 'User Interface' -c_lucidesc = 'LuCI is a collection of free Lua software including an MVC-Webframework and webinterface for embedded devices. LuCI is licensed under the Apache-License.' -c_projecthome = 'Project Homepage' -c_leaddev = 'Lead Development' -c_contributors = 'Contributing Developers' -c_thanksto = 'Thanks To' -a_i_i_hello = 'Hello!' -a_i_i_admin1 = 'This is the administration area of LuCI.' -a_i_i_admin2 = 'LuCI is a free, flexible, and user friendly graphical interface for configuring OpenWrt Kamikaze.' -a_i_i_admin3 = 'On the following pages you can adjust all important settings of your router.' -a_i_i_admin4 = 'Notice: In LuCI changes have to be confirmed by clicking Changes - Save & Apply before being applied.' -a_i_i_admin5 = 'As we always want to improve this interface we are looking forward to your feedback and suggestions.' -a_i_i_admin6 = 'And now have fun with your router!' -a_i_i_team = 'The LuCI Team' -a_i_luci1 = 'Here you can customize the settings and the functionality of LuCI.' -a_i_ucicommit = 'Post-commit actions' -a_i_ucicommit1 = 'These commands will be executed automatically when a given UCI configuration is committed allowing changes to be applied instantly.' -a_i_keepflash = 'Files to be kept when flashing a new firmware' -a_i_keepflash1 = 'When flashing a new firmware with LuCI these files will be added to the new firmware installation.' -a_st_i_status1 = 'Here you can find information about the current system status like CPU clock frequency, memory usage or network interface data.' -a_st_i_status2 = 'Also kernel or service logfiles can be viewed here to get an overview over their current state.' -iwscan = 'WLAN-Scan' -iwscan1 = 'Wifi networks in your local environment' -iwscan_encr = 'Encr.' -iwscan_link = 'Link' -iwscan_signal = 'Signal' -iwscan_noise = 'Noise' -routes = 'Routes' -routes_netmask = 'Netmask' -routes_gateway = 'Gateway' -routes_metric = 'Metric' -a_s_desc = 'Here you can configure the basic aspects of your device like its hostname or the timezone.' -a_s_packages = 'Software' -a_s_changepw = 'Admin Password' -a_s_p_ipkg = 'OPKG-Configuration' -a_s_sshkeys = 'SSH-Keys' -a_s_fstab = 'Mount Points' -a_s_i_system1 = 'Change settings related to the system itself, its identification, installed hard- and software, authentication or mount points.' -a_s_i_system2 = 'These settings define the base of your system.' -a_s_i_system3 = 'Pay attention as any misconfiguration here may prevent your device from booting or may lock yourself out of it.' -a_s_if = 'Interfaces' -a_s_if_bridge = 'Bridge' -a_s_if_bridge_id = 'ID' -a_s_if_bridge_port = 'Bridge Port' -a_s_if_bridge_stp = 'STP' -a_s_if_device = 'Device' -a_s_if_ethbridge = 'Ethernet Bridge' -a_s_if_ethdev = 'Ethernet Adapter' -a_s_if_ethswitch = 'Ethernet Switch' -a_s_if_interface = 'Interface' -a_s_if_ipconfig = 'IP Configuration' -a_s_if_ipconfig_alias = 'Alias' -a_s_if_ipconfig_dhcp = 'DHCP assigned' -a_s_if_ipconfig_ipv6 = 'IPv6' -a_s_if_ipconfig_none = 'Not configured' -a_s_if_ipconfig_primary = 'Primary' -a_s_if_iwchannel = 'Channel' -a_s_if_iwmode = 'Mode' -a_s_if_iwmode_adhoc = 'Ad-Hoc' -a_s_if_iwmode_ahdemo = 'Pseudo Ad-Hoc' -a_s_if_iwmode_ap = 'Master' -a_s_if_iwmode_apwds = 'Master + WDS' -a_s_if_iwmode_sta = 'Client' -a_s_if_iwmode_stawds = 'Client + WDS' -a_s_if_iwmode_wds = 'WDS' -a_s_if_iwssid = 'SSID' -a_s_if_mac = 'MAC' -a_s_if_pkts = 'Pkts.' -a_s_if_status = 'Interface Status' -a_s_if_transfer = 'Transfer' -a_s_if_transfer_rx = 'RX' -a_s_if_transfer_tx = 'TX' -a_s_if_type = 'Type' -a_s_if_vlan = 'VLAN' -a_s_if_vlanports = 'Ports' -a_s_if_wifidev = 'Wireless Adapter' -a_s_ipt = 'Firewall' -a_s_ipt_actions = 'Actions' -a_s_ipt_bytes = 'Traffic' -a_s_ipt_chain = 'Chain' -a_s_ipt_destination = 'Destination' -a_s_ipt_flags = 'Flags' -a_s_ipt_inputif = 'In' -a_s_ipt_nochains = 'No chains in this table' -a_s_ipt_norules = 'No Rules in this chain' -a_s_ipt_options = 'Options' -a_s_ipt_outputif = 'Out' -a_s_ipt_packets = 'Packets' -a_s_ipt_pkts = 'Pkts.' -a_s_ipt_policy = 'Policy' -a_s_ipt_prot = 'Prot.' -a_s_ipt_references = 'References' -a_s_ipt_reset = 'Reset Counters' -a_s_ipt_restart = 'Restart Firewall' -a_s_ipt_rulenum = '#' -a_s_ipt_source = 'Source' -a_s_ipt_status = 'Firewall Status' -a_s_ipt_table = 'Table' -a_s_ipt_target = 'Target' -a_s_packages_do = 'Perform Actions' -a_s_packages_install = 'Install' -a_s_packages_installurl = 'Download and install package' -a_s_packages_ipkg = 'Edit package lists and installation targets' -a_s_packages_name = 'Package name' -a_s_packages_remove = 'Remove' -a_s_packages_search = 'Find package' -a_s_packages_update = 'Package lists updated' -a_s_packages_updatelist = 'Update package lists' -a_s_packages_upgrade = 'Upgrade installed packages' -a_s_packages_code1 = 'Could not set default destination' -a_s_packages_code2 = 'Error parsing config file' -a_s_packages_code3 = 'Could not create temporary directory (ran out of space?)' -a_s_packages_code4 = 'Could not get adminstrative lock (ran out of space?)' -a_s_packages_code5 = 'Unsatisfied Dependencies' -a_s_packages_code6 = 'Refused to remove essential package' -a_s_packages_code7 = 'Package has dependents' -a_s_packages_code8 = 'Package has no installation candidate (wrong name?)' -a_s_packages_code9 = 'Package has no available architecture ' -a_s_packages_code10 = 'Package is not trusted' -a_s_packages_code11 = 'Error while downloading' -a_s_packages_code12 = 'Conflicts with other packages' -a_s_packages_code13 = 'Package is already installed' -a_s_packages_code14 = 'Package has unresolved dependencies' -a_s_packages_code15 = 'Refused to downgrade package' -a_s_packages_code16 = 'Package manager ran out of space' -a_s_packages_code17 = 'Bad signature while verifiying package' -a_s_packages_code18 = 'MD5 error while verifiying package' -a_s_packages_code19 = 'Internal error occured' -a_s_p_ipkg_pkglists = 'Package lists' -a_s_p_ipkg_targets = 'Installation targets' -a_s_changepw1 = 'Change the password of the system administrator (User root)' -a_s_changepw_changed = 'Password successfully changed' -a_s_changepw_nomatch = 'Error: Passwords do not match' -a_s_sshkeys1 = 'Here you can paste public SSH-Keys (one per line) for SSH public-key authentication.' -a_s_fstab_mountpoints = 'Mount Points' -a_s_fstab_mountpoints1 = 'Mount Points define at which point a memory device will be attached to the filesystem' -a_s_fstab_active = 'Mounted file systems' -a_s_fstab_used = 'Used' -a_s_fstab_avail = 'Available' -a_s_fstab_mountpoint = 'Mount Point' -a_s_fstab_device1 = 'The device file of the memory or partition (e.g. /dev/sda1)' -a_s_fstab_fs1 = 'The filesystem that was used to format the memory (e.g. ext3)' -a_s_fstab_swap1 = 'If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the RAM.' -a_s_reboot1 = 'Reboots the operating system of your device' -a_s_reboot_do = 'Perform reboot' -a_s_reboot_running = 'Please wait: Device rebooting...' -a_s_reboot_u = 'Warning: There are unsaved changes that will be lost while rebooting!' -a_s_applyreboot1 = 'Changes applied.' -a_s_backup = 'Backup / Restore' -a_s_backup_backup = 'Create backup' -a_s_backup_archive = 'Backup Archive' -a_s_backup_reset = 'Reset router to defaults' -a_s_backup_reset1 = 'Proceed reverting all settings and resetting to firmware defaults?' -a_s_backup_restore = 'Restore backup' -a_s_backup1 = 'Here you can backup and restore your router configuration and - if possible - reset the router to the default settings.' -a_srv_http = 'HTTP-Server' -a_srv_ssh = 'SSH-Server' -a_srv_services1 = 'Services and daemons perform certain tasks on your device.' -a_srv_services2 = 'Most of them are network servers, that offer a certain service for your device or network like shell access, serving webpages like LuCI, doing mesh routing, sending e-mails, ...' -a_srv_http1 = 'A small webserver which can be used to serve LuCI.' -a_srv_http_authrealm = 'Authentication Realm' -a_srv_http_authrealm1 = 'The realm which will be displayed at the authentication prompt for protected pages.' -a_srv_http_config1 = 'defaults to /etc/httpd.conf' -a_srv_http_root = 'Document root' -a_srv_http_keepalive = 'Enable Keep-Alive' -a_srv_http_timeout = 'Connection timeout' -a_srv_http_path = 'Plugin path' -a_srv_lucittpd = 'A lightweight HTTP/1.1 webserver written in C and Lua designed to serve LuCI' -a_srv_dropbear1 = 'Dropbear offers SSH network shell access and an integrated SCP server' -a_srv_d_pwauth = 'Password authentication' -a_srv_d_pwauth1 = 'Allow SSH password authentication' -a_w_channel = 'Channel' -a_w_wifi1 = 'On this pages you can find configuration options for WLAN based wireless networks.' -a_w_wifi2 = 'You can easily integrate your 802.11a/b/g/n-devices into your physical network and use the virtual adapter support to build wireless repeaters or offer several networks with one device.' -a_w_wifi3 = 'There is support for Managed, Client, Ad-Hoc and WDS operating modes as well as WPA and WPA2 encryption for secure communnication.' -a_w_devices1 = 'Here you can configure installed wifi devices.' -a_w_txantenna = 'Transmit Antenna' -a_w_rxantenna = 'Receive Antenna' -a_w_distance1 = 'Distance to furthest station (in meter)' -a_w_diversity = 'Diversity' -a_w_countrycode = 'Country Code' -a_w_connlimit = 'Connection Limit' -a_w_networks1 = 'You can run several wifi networks with one device. Be aware that there are certain hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network simultaneously.' -a_w_netid = 'Network Name (ESSID)' -a_w_network1 = 'Add the Wifi network to physical network' -a_w_netmanual = ' - Create new Network - ' -a_w_txpwr = 'Transmit Power' -a_w_brcmburst = 'Broadcom Frameburst' -a_w_athburst = 'Atheros Frameburst' -a_w_radiussrv = 'RadiusServer' -a_w_radiusport = 'Radius-Port' -a_w_apisolation = 'AP-Isolation' -a_w_apisolation1 = 'Prevents Client to Client communication' -a_w_hideessid = 'Hide ESSID' -a_w_ap = 'Access Point' -a_w_adhoc = 'Ad-Hoc' -a_w_ahdemo = 'Pseudo Ad-Hoc (ahdemo)' -a_w_client = 'Client' -a_w_wds = 'WDS' -a_w_monitor = 'Monitor' -dhcp_dnsmasq_desc = 'Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls' -dhcp_dnsmasq_domainneeded = 'Domain required' -dhcp_dnsmasq_domainneeded_desc = 'Don't forward DNS-Requests without DNS-Name' -dhcp_dnsmasq_authoritative = 'Authoritative' -dhcp_dnsmasq_authoritative_desc = 'This is the only DHCP in the local network' -dhcp_dnsmasq_boguspriv = 'Filter private' -dhcp_dnsmasq_boguspriv_desc = 'Don't forward reverse lookups for local networks' -dhcp_dnsmasq_filterwin2k = 'Filter useless' -dhcp_dnsmasq_filterwin2k_desc = 'filter useless DNS-queries of Windows-systems' -dhcp_dnsmasq_localisequeries = 'Localise queries' -dhcp_dnsmasq_localisequeries_desc = 'localises the hostname depending on its subnet' -dhcp_dnsmasq_local = 'Local Server' -dhcp_dnsmasq_domain = 'Local Domain' -dhcp_dnsmasq_expandhosts = 'Expand Hosts' -dhcp_dnsmasq_expandhosts_desc = 'adds domain names to hostentries in the resolv file' -dhcp_dnsmasq_nonegcache = 'don't cache unknown' -dhcp_dnsmasq_nonegcache_desc = 'prevents caching of negative DNS-replies' -dhcp_dnsmasq_readethers = 'Use /etc/ethers' -dhcp_dnsmasq_readethers_desc = 'Read /etc/ethers to configure the DHCP-Server' -dhcp_dnsmasq_leasefile = 'Leasefile' -dhcp_dnsmasq_leasefile_desc = 'file where given DHCP-leases will be stored' -dhcp_dnsmasq_resolvfile = 'Resolvfile' -dhcp_dnsmasq_resolvfile_desc = 'local DNS file' -dhcp_dnsmasq_nohosts = 'Ignore /etc/hosts' -dhcp_dnsmasq_strictorder = 'Strict order' -dhcp_dnsmasq_strictorder_desc = 'DNS-Server will be queried in the order of the resolvfile' -dhcp_dnsmasq_logqueries = 'Log queries' -dhcp_dnsmasq_noresolv = 'Ignore resolve file' -dhcp_dnsmasq_dnsforwardmax = 'concurrent queries' -dhcp_dnsmasq_port = 'DNS-Port' -dhcp_dnsmasq_ednspacket_max = 'max. EDNS0 paket size' -dhcp_dnsmasq_dhcpleasemax = 'max. DHCP-Leases' -dhcp_dnsmasq_addnhosts = 'additional hostfile' -dhcp_dnsmasq_queryport = 'query port' -dhcp_dnsmasq_enabletftp = 'Enable TFTP-Server' -dhcp_dnsmasq_tftproot = 'TFTP-Server Root' -dhcp_dnsmasq_dhcpboot = 'Network Boot Image' -a_n_switch = 'Switch' -a_n_conntrack = 'Active Connections' -a_n_conntrack_desc = 'This page gives an overview over currently active network connections.' -a_n_routes = 'Routes' -a_n_routes4 = 'IPv4 Routes' -a_n_routes6 = 'IPv6 Routes' -a_network1 = 'In this area you find all network-related settings.' -a_network2 = 'On most routers the network switch can be freely configured and splitted up into several VLANs.' -a_network3 = 'Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet.' -a_network4 = 'With DHCP devices in your local network can be automatically configured for network communication.' -a_network5 = 'Firewall and portforwarding can be used to secure your network while providing services to external networks.' -a_n_switch1 = 'The network ports on your router can be combined to several VLANs in which computers can communicate directly with each other. VLANs are often used to separate different network segments. Often there is by default one Uplink port for a connection to the next greater network like the internet and other ports for a local network.' -network_switch_desc = 'Ports belonging to a VLAN are separated with spaces. The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router. On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.' -a_n_ifaces1 = 'On this page you can configure the network interfaces. You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names of several network interfaces separated by spaces. You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).' -a_n_i_bridge = 'Bridge interfaces' -a_n_i_bridge1 = 'creates a bridge over specified interface(s)' -dhcp_desc = 'With DHCP network members can automatically receive their network settings (IP-address, netmask, DNS-server, ...).' -dhcp_dhcp_leasetime = 'Leasetime' -dhcp_dhcp_dynamicdhcp = 'Dynamic DHCP' -dhcp_dhcp_ignore = 'Ignore interface' -dhcp_dhcp_ignore_desc = 'disable DHCP for this interface' -dhcp_dhcp_force = 'Force' -dhcp_dhcp_start_desc = 'first address (last octet)' -dhcp_dhcp_limit_desc = 'number of leased addresses -1' -dhcp_dhcp_dhcpoption = 'DHCP-Options' -dhcp_dhcp_dhcpoption_desc = 'See "dnsmasq --help dhcp" for a list of available options.' -dhcp_leases = 'Leases' -luci_ethers = 'Static Leases' -dhcp_timeremain = 'Leasetime remaining' -dhcp_leases_active = 'Active Leases' -a_n_ptp = 'Point-to-Point Connections' -a_n_ptp1 = 'Point-to-Point connections with PPPoE or PPTP are often used to connect a device over DSL or similar technologies to an internet access point.' -network_interface_prereq = 'You need to install "comgt" for UMTS/GPRS, "ppp-mod-pppoe" for PPPoE, "ppp-mod-pppoa" for PPPoA or "pptp" for PPtP support' -network_interface_prereq_mini = 'You need to install "ppp-mod-pppoe" for PPPoE or "pptp" for PPtP support' -network_interface_server = 'PPTP-Server' -network_interface_demand = 'Automatic Disconnect' -network_interface_demand_desc = 'Time (in seconds) after which an unused connection will be closed' -network_interface_keepalive = 'Keep-Alive' -network_interface_keepalive_desc = 'Number of failed connection tests to initiate automatic reconnect' -network_interface_device = 'Modem device' -network_interface_device_desc = 'The device node of your modem, e.g. /dev/ttyUSB0' -network_interface_defaultroute = 'Replace default route' -network_interface_defaultroute_desc = 'Let pppd replace the current default route to use the PPP interface after successful connect' -network_interface_peerdns = 'Use peer DNS' -network_interface_peerdns_desc = 'Configure the local DNS server to use the name servers adverticed by the PPP peer' -network_interface_ipv6 = 'Enable IPv6 on PPP link' -network_interface_connect = 'Connect script' -network_interface_connect_desc = 'Let pppd run this script after establishing the PPP link' -network_interface_disconnect = 'Disconnect script' -network_interface_disconnect_desc = 'Let pppd run this script before tearing down the PPP link' -network_interface_pppd_options = 'Additional pppd options' -network_interface_pppd_options_desc = 'Specify additional command line arguments for pppd here' -network_interface_apn = 'Access point (APN)' -network_interface_pincode = 'PIN code' -network_interface_pincode_desc = 'Make sure that you provide the correct pin code here or you might lock your sim card!' -network_interface_service = 'Service type' -network_interface_maxwait = 'Setup wait time' -network_interface_maxwait_desc = 'Seconds to wait for the modem to become ready before attempting to connect' -network_interface_encaps = 'PPPoA Encapsulation' -a_n_r_routes1 = 'Routes specify over which interface and gateway a certain host or network can be reached.' -a_n_routes_static = 'Static Routes' -a_n_routes_static4 = 'Static IPv4 Routes' -a_n_routes_static6 = 'Static IPv6 Routes' -a_n_routes_kernel4 = 'Active IPv4-Routes' -a_n_routes_kernel6 = 'Active IPv6-Routes' -a_n_r_target1 = 'Host-IP or Network' -a_n_r_target6 = 'IPv6-Address or Network (CIDR)' -a_n_r_netmask1 = 'if target is a network' -m_n_inet = 'Internet Connection' -m_n_local = 'Local Network' -m_n_route = 'Route' -m_n_brdige = 'Bridge' -m_w_ap = 'Provide (Access Point)' -m_w_adhoc = 'Independent (Ad-Hoc)' -m_w_client = 'Join (Client)' -m_w_wds = 'Distributed (WDS)' -m_w_clientmode = 'Clientmode' -system_system_logsize = 'System log buffer size' -system_system_logip = 'External system log server' -system_system_conloglevel = 'Log output level' -system_system_conloglevel_desc = 'Level of log messages on the console' -m_i_processor = 'Processor' -m_i_memory = 'Memory' -m_i_systemtime = 'Local Time' -m_i_uptime = 'Uptime' -m_n_d_firstaddress = 'First leased address' -m_n_d_numleases = 'Number of leased addresses' -routingtable = 'Routing table' -wlanscan = 'Wifi scan' -frequency = 'Frequency' -power = 'Power' -noise = 'Noise' -signal = 'Signal' -link = 'Link' -frag = 'Frag.' -rts = 'RTS' -bitrate = 'Bitrate' -m_n_keepalive = 'automatically reconnect' -m_n_dialondemand = 'disconnect when idle for' -m_n_pptp_server = 'PPTP-Server' -leds = 'LED Configuration' -leds_desc = 'Customizes the behaviour of the device LEDs if possible.' -system_led_name = 'LED Name' -system_led_sysfs = 'LED Device' -system_led_default = 'Default state' -system_led_default_desc = 'ticked = on' -system_led_trigger = 'Trigger' -system_led_trigger_none = 'None' -system_led_trigger_defaulton = 'Default On' -system_led_trigger_timer = 'Timer' -system_led_trigger_heartbeat = 'Heartbeat (Load Average)' -system_led_trigger_netdev = 'Network Device' -system_led_delayoff = 'Off-State Delay' -system_led_delayoff_desc = 'Time (in ms) the LED is off' -system_led_delayon = 'On-State Delay' -system_led_delayon_desc = 'Time (in ms) the LED is on' -system_led_dev = 'Device' -system_led_mode = 'Trigger Mode' -system_led_mode_link = 'Link On' -system_led_mode_tx = 'Transmit' -system_led_mode_rx = 'Receive' -network_interface_up = 'Active' -network_interface_hwaddr = 'MAC-Address' -network_interface_hwaddr_desc = 'Hardware Address' -network_interface_txrx = 'Traffic' -network_interface_txrx_desc = 'transmitted / received' -network_interface_err = 'Errors' -network_interface_err_desc = 'TX / RX' -network_interface_fwzone = 'Create / Assign firewall-zone' -network_interface_fwzone_desc = 'This interface does not belong to any firewall zone yet.' -process_head = 'Processes' -process_descr = 'This list gives an overview over currently running system processes and their status.' -process_pid = 'PID' -process_owner = 'Owner' -process_command = 'Command' -process_cpu = 'CPU usage (%)' -process_mem = 'Memory usage (%)' -process_hup = 'Hang Up' -process_term = 'Terminate' -process_kill = 'Kill' -mem_cached = 'cached' -mem_buffered = 'buffered' -mem_free = 'free' -a_s_crontab = 'Scheduled Tasks' -a_s_crontab1 = 'This is the system crontab in which scheduled tasks can be defined.' -a_w_nasid = 'NAS ID' -a_w_cacert = 'Path to CA-Certificate' -a_w_eaptype = 'EAP-Method' -a_w_tlsprivkey = 'Path to Private Key' -a_w_tlsprivkeypwd = 'Password of Private Key' -a_w_peapauth = 'Authentication' -a_w_peapidentity = 'Identity' -a_w_peappassword = 'Password' -a_w_create = 'Create Network' -hostnames = 'Hostnames' -hostnames_entries = 'Host entries' -hostnames_hostname = 'Hostname' -hostnames_address = 'IP address' -m_n_mssfix = 'Clamp Segment Size' -m_n_mssfix_desc = 'Fixes problems with unreachable websites, submitting forms or other unexpected behaviour for some ISPs.' -admin_upgrade = 'Flash Firmware' -admin_upgrade_badimage = 'The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform.' -admin_upgrade_checksum = 'Checksum' -admin_upgrade_desc = 'Upload an OpenWrt image file to reflash the device.' -admin_upgrade_filesize = 'Size' -admin_upgrade_fwimage = 'Firmware image' -admin_upgrade_keepcfg = 'Keep configuration files' -admin_upgrade_nosupport = 'Sorry. OpenWrt does not support a system upgrade on this platform.
You need to manually flash your device.' -admin_upgrade_running = 'The system is flashing now.
DO NOT POWER OFF THE DEVICE!
Wait a few minutes until you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings.' -admin_upgrade_spaceavail = ' (%s available)' -admin_upgrade_toolarge = 'It appears that you try to flash an image that does not fit into the flash memory, please verify the image file!' -admin_upgrade_upload = 'Upload image' -admin_upgrade_uploaded = 'The flash image was uploaded. Below is the checksum and file size listed, compare them with the original file to ensure data integrity.
Click "Proceed" below to start the flash procedure.' diff --git a/i18n/english/luasrc/i18n/cbi.en.lua b/i18n/english/luasrc/i18n/cbi.en.lua deleted file mode 100644 index 7e5ae152e..000000000 --- a/i18n/english/luasrc/i18n/cbi.en.lua +++ /dev/null @@ -1,17 +0,0 @@ -cbi_add = 'Add entry' -cbi_del = 'Remove entry' -cbi_replace = 'Replace entry' -cbi_invalid = 'Invalid input value' -cbi_invalid_section = 'Validation failed: Please check any input fields for mistakes.' -cbi_missing = 'This field is mandatory' -cbi_deperror = 'Validation failed: At least one mandatory field has no or an invalid value' -cbi_reqerror = 'A requirement for this option was not met' -cbi_addopt = '-- Additional Field --' -cbi_optional = ' (optional)' -cbi_sectempty = 'This section contains no values yet' -cbi_manual = '-- custom --' -cbi_select = '-- Please choose --' -cbi_gorel = 'Go to relevant configuration page' -cbi_applying = 'Applying changes' -cbi_upload = 'Uploaded File' -cbi_browser = 'Search file...' diff --git a/i18n/english/luasrc/i18n/default.en.lua b/i18n/english/luasrc/i18n/default.en.lua deleted file mode 100644 index 21d43fd82..000000000 --- a/i18n/english/luasrc/i18n/default.en.lua +++ /dev/null @@ -1,104 +0,0 @@ -skiplink1 = 'Skip to navigation' -skiplink2 = 'Skip to content' -navigation = 'Navigation' -about = 'About' -add = 'Add' -addresses = 'Addresses' -aliases = 'Aliases' -all = 'all' -back = 'back' -administration = 'Administration' -essentials = 'Essentials' -apply = 'Apply' -basicsettings = 'Basic Settings' -broadcast = 'IPv4-Broadcast' -cancel = 'Cancel' -changes = 'Changes' -channel = 'Channel' -cidr6 = 'CIDR-Notation: address/prefix' -code = 'Code' -config = 'Configuration' -configfile = 'Configuration file' -confirmation = 'Confirmation' -delete = 'Delete' -descr = 'Description' -design = 'Design' -destination = 'Destination' -device = 'Device' -devices = 'Devices' -disable = 'disable' -distance = 'Distance' -dmesg = 'Kernel Log' -dnsserver = 'DNS-Server' -edit = 'Edit' -enable = 'enable' -encryption = 'Encryption' -error = 'Error' -filesystem = 'Filesystem' -filter = 'Filter' -gateway = 'IPv4-Gateway' -gateway6 = 'IPv6-Gateway' -general = 'General' -hostname = 'Hostname' -install = 'Install' -installed = 'installed' -interface = 'Interface' -interfaces = 'Interfaces' -ipaddress = 'IPv4-Address' -ip6address = 'IPv6-Address' -legend = 'Legend' -library = 'Library' -logout = 'Logout' -key = 'Key' -language = 'Language' -limit = 'Limit' -load = 'Load' -login = 'Login' -macaddress = 'MAC-Address' -manpage = 'see '%s' manpage' -metric = 'Metric' -mode = 'Mode' -name = 'Name' -netmask = 'IPv4-Netmask' -network = 'Network' -networks = 'Networks' -none = 'none' -notinstalled = 'not installed' -ok = 'OK' -options = 'Options' -overview = 'Overview' -packagemanager = 'Package Manager' -password = 'Password' -path = 'Path' -port = 'Port' -ports = 'Ports' -proceed = 'Proceed' -protocol = 'Protocol' -reboot = 'Reboot' -reset = 'Reset' -revert = 'Revert' -save = 'Save' -saveapply = 'Save & Apply' -scan = 'Scan' -service = 'Service' -services = 'Services' -settings = 'Settings' -size = 'Size' -source = 'Source' -start = 'Start' -static = 'static' -status = 'Status' -statistics = 'Statistics' -submit = 'Submit' -syslog = 'System Log' -system = 'System' -target = 'Target' -timezone = 'Timezone' -type = 'Type' -unknownerror = 'Unknown Error' -unsavedchanges = 'Unsaved Changes' -username = 'Username' -version = 'Version' -webui = 'Web UI' -wifi = 'Wifi' -zone = 'Zone' diff --git a/i18n/english/luasrc/i18n/sysauth.en.lua b/i18n/english/luasrc/i18n/sysauth.en.lua deleted file mode 100644 index 2a8759f45..000000000 --- a/i18n/english/luasrc/i18n/sysauth.en.lua +++ /dev/null @@ -1,3 +0,0 @@ -sysauth_head = 'Authorization Required' -sysauth_prompt = 'Please enter your username and password.' -sysauth_failed = 'Invalid username and/or password! Please try again.' diff --git a/i18n/english/luasrc/i18n/wifi.en.lua b/i18n/english/luasrc/i18n/wifi.en.lua deleted file mode 100644 index 1c4bc6097..000000000 --- a/i18n/english/luasrc/i18n/wifi.en.lua +++ /dev/null @@ -1,39 +0,0 @@ -wifi_auto = 'auto' -wifi_fh = 'Frequency Hopping' -wifi_diversity = 'Diversity' -wifi_txantenna = 'Transmitter Antenna' -wifi_rxantenna = 'Receiver Antenna' -wifi_distance = 'Distance Optimization' -wifi_distance_desc = 'Distance to farthest network member in meters.' -wifi_macpolicy = 'MAC-Address Filter' -wifi_whitelist = 'Allow listed only' -wifi_blacklist = 'Allow all except listed' -wifi_maclist = 'MAC-List' -wifi_bursting = 'Frame Bursting' -wifi_regdomain = 'Regulatory Domain' -wifi_country = 'Country Code' -wifi_outdoor = 'Outdoor Channels' -wifi_maxassoc = 'Connection Limit' -wifi_essid = 'ESSID' -wifi_bssid = 'BSSID' -wifi_frag = 'Fragmentation Threshold' -wifi_rts = 'RTS/CTS Threshold' -wifi_wds = 'WDS' -wifi_wdssep = 'Separate WDS' -wifi_hidden = 'Hide ESSID' -wifi_isloate = 'Isolate Clients' -wifi_isloate_desc = 'Prevent Client to Client Communication' -wifi_bgscan = 'Background Scan' -wifi_rate = 'Transmission Rate' -wifi_mcast_rate = 'Multicast Rate' -wifi_minrate = 'Minimum Rate' -wifi_maxrate = 'Maximum Rate' -wifi_compression = 'Compression' -wifi_turbo = 'Turbo Mode' -wifi_ff = 'Fast Frames' -wifi_wmm = 'WMM Mode' -wifi_xr = 'XR Support' -wifi_ar = 'AR Support' -wifi_nosbeacon = 'Disable HW-Beacon timer' -wifi_noprobereq = 'Do not send probe responses' -wifi_wpareq = 'WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP and ad-hoc mode) to be installed.' -- cgit v1.2.3