From 1aa676d501f806109d626665cd82390c175fd029 Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Tue, 23 Nov 2010 00:11:00 +0000 Subject: modules/admin-full: make menus work with no dnsmasq or firewall installed --- .../luasrc/model/cbi/admin_network/ifaces.lua | 206 +++++++++++---------- .../luasrc/model/cbi/admin_network/wifi_add.lua | 42 +++-- 2 files changed, 135 insertions(+), 113 deletions(-) diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua b/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua index fdff48d49..ad4ca9343 100644 --- a/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua +++ b/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua @@ -20,6 +20,9 @@ local fw = require "luci.model.firewall" arg[1] = arg[1] or "" +local has_dnsmasq = fs.access("/etc/config/dhcp") +local has_firewall = fs.access("/etc/config/firewall") + local has_3g = fs.access("/usr/bin/gcom") local has_pptp = fs.access("/usr/sbin/pptp") local has_pppd = fs.access("/usr/sbin/pppd") @@ -30,9 +33,12 @@ local has_6in4 = fs.access("/lib/network/6in4.sh") local has_6to4 = fs.access("/lib/network/6to4.sh") m = Map("network", translate("Interfaces") .. " - " .. arg[1]:upper(), translate("On this page you can configure the network interfaces. You can bridge several interfaces by ticking the \"bridge interfaces\" field and enter the names of several network interfaces separated by spaces. You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).")) -m:chain("firewall") m:chain("wireless") +if has_firewall then + m:chain("firewall") +end + nw.init(m.uci) fw.init(m.uci) @@ -56,7 +62,7 @@ if has_pppd then s:tab("ppp", translate("PPP Settings")) end if has_pppoa then s:tab("atm", translate("ATM Settings")) end if has_6in4 or has_6to4 then s:tab("tunnel", translate("Tunnel Settings")) end s:tab("physical", translate("Physical Settings")) -s:tab("firewall", translate("Firewall Settings")) +if has_firewall then s:tab("firewall", translate("Firewall Settings")) end st = s:taboption("general", DummyValue, "__status", translate("Status")) st.template = "admin_network/iface_status" @@ -143,38 +149,38 @@ ifname_multi.cfgvalue = ifname_single.cfgvalue ifname_multi.write = ifname_single.write -local fwd_to, fwd_from +if has_firewall then + fwzone = s:taboption("firewall", Value, "_fwzone", + translate("Create / Assign firewall-zone"), + translate("Choose the firewall zone you want to assign to this interface. Select unspecified to remove the interface from the associated zone or fill out the create field to define a new zone and attach the interface to it.")) -fwzone = s:taboption("firewall", Value, "_fwzone", - translate("Create / Assign firewall-zone"), - translate("Choose the firewall zone you want to assign to this interface. Select unspecified to remove the interface from the associated zone or fill out the create field to define a new zone and attach the interface to it.")) + fwzone.template = "cbi/firewall_zonelist" + fwzone.network = arg[1] + fwzone.rmempty = false -fwzone.template = "cbi/firewall_zonelist" -fwzone.network = arg[1] -fwzone.rmempty = false + function fwzone.cfgvalue(self, section) + self.iface = section + local z = fw:get_zone_by_network(section) + return z and z:name() + end -function fwzone.cfgvalue(self, section) - self.iface = section - local z = fw:get_zone_by_network(section) - return z and z:name() -end + function fwzone.write(self, section, value) + local zone = fw:get_zone(value) -function fwzone.write(self, section, value) - local zone = fw:get_zone(value) + if not zone and value == '-' then + value = m:formvalue(self:cbid(section) .. ".newzone") + if value and #value > 0 then + zone = fw:add_zone(value) + else + fw:del_network(section) + end + end - if not zone and value == '-' then - value = m:formvalue(self:cbid(section) .. ".newzone") - if value and #value > 0 then - zone = fw:add_zone(value) - else + if zone then fw:del_network(section) + zone:add_network(section) end end - - if zone then - fw:del_network(section) - zone:add_network(section) - end end ipaddr = s:taboption("general", Value, "ipaddr", translate("IPv4-Address")) @@ -507,89 +513,95 @@ dns.optional = true dns.datatype = "ip4addr" -m2 = Map("dhcp", "", "") -function m2.on_parse() - local has_section = false +-- +-- Display DNS settings if dnsmasq is available +-- - m2.uci:foreach("dhcp", "dhcp", function(s) - if s.interface == arg[1] then - has_section = true - return false - end - end) +if has_dnsmasq then + m2 = Map("dhcp", "", "") + function m2.on_parse() + local has_section = false - if not has_section then - m2.uci:section("dhcp", "dhcp", nil, { interface = arg[1], ignore = "1" }) - m2.uci:save("dhcp") + m2.uci:foreach("dhcp", "dhcp", function(s) + if s.interface == arg[1] then + has_section = true + return false + end + end) + + if not has_section then + m2.uci:section("dhcp", "dhcp", nil, { interface = arg[1], ignore = "1" }) + m2.uci:save("dhcp") + end end -end -s = m2:section(TypedSection, "dhcp", translate("DHCP Server")) -s.addremove = false -s.anonymous = true -s:tab("general", translate("General Setup")) -s:tab("advanced", translate("Advanced Settings")) + s = m2:section(TypedSection, "dhcp", translate("DHCP Server")) + s.addremove = false + s.anonymous = true + s:tab("general", translate("General Setup")) + s:tab("advanced", translate("Advanced Settings")) -function s.filter(self, section) - return m2.uci:get("dhcp", section, "interface") == arg[1] -end + function s.filter(self, section) + return m2.uci:get("dhcp", section, "interface") == arg[1] + end -local ignore = s:taboption("general", Flag, "ignore", - translate("Ignore interface"), - translate("Disable DHCP for " .. - "this interface.")) - -ignore.rmempty = false - -local start = s:taboption("general", Value, "start", translate("Start"), - translate("Lowest leased address as offset from the network address.")) -start.optional = true -start.datatype = "uinteger" -start.default = "100" - -local limit = s:taboption("general", Value, "limit", translate("Limit"), - translate("Maximum number of leased addresses.")) -limit.optional = true -limit.datatype = "uinteger" -limit.default = "150" - -local ltime = s:taboption("general", Value, "leasetime", translate("Leasetime"), - translate("Expiry time of leased addresses, minimum is 2 Minutes (2m).")) -ltime.rmempty = true -ltime.default = "12h" - -local dd = s:taboption("advanced", Flag, "dynamicdhcp", - translate("Dynamic DHCP"), - translate("Dynamically allocate DHCP addresses for clients. If disabled, only " .. - "clients having static leases will be served.")) - -dd.rmempty = false -function dd.cfgvalue(self, section) - return Flag.cfgvalue(self, section) or "1" -end + local ignore = s:taboption("general", Flag, "ignore", + translate("Ignore interface"), + translate("Disable DHCP for " .. + "this interface.")) + + ignore.rmempty = false + + local start = s:taboption("general", Value, "start", translate("Start"), + translate("Lowest leased address as offset from the network address.")) + start.optional = true + start.datatype = "uinteger" + start.default = "100" + + local limit = s:taboption("general", Value, "limit", translate("Limit"), + translate("Maximum number of leased addresses.")) + limit.optional = true + limit.datatype = "uinteger" + limit.default = "150" + + local ltime = s:taboption("general", Value, "leasetime", translate("Leasetime"), + translate("Expiry time of leased addresses, minimum is 2 Minutes (2m).")) + ltime.rmempty = true + ltime.default = "12h" + + local dd = s:taboption("advanced", Flag, "dynamicdhcp", + translate("Dynamic DHCP"), + translate("Dynamically allocate DHCP addresses for clients. If disabled, only " .. + "clients having static leases will be served.")) + + dd.rmempty = false + function dd.cfgvalue(self, section) + return Flag.cfgvalue(self, section) or "1" + end -s:taboption("advanced", Flag, "force", translate("Force"), - translate("Force DHCP on this network even if another server is detected.")) + s:taboption("advanced", Flag, "force", translate("Force"), + translate("Force DHCP on this network even if another server is detected.")) --- XXX: is this actually useful? ---s:taboption("advanced", Value, "name", translate("Name"), --- translate("Define a name for this network.")) + -- XXX: is this actually useful? + --s:taboption("advanced", Value, "name", translate("Name"), + -- translate("Define a name for this network.")) -mask = s:taboption("advanced", Value, "netmask", - translate("IPv4-Netmask"), - translate("Override the netmask sent to clients. Normally it is calculated " .. - "from the subnet that is served.")) + mask = s:taboption("advanced", Value, "netmask", + translate("IPv4-Netmask"), + translate("Override the netmask sent to clients. Normally it is calculated " .. + "from the subnet that is served.")) -mask.optional = true -mask.datatype = "ip4addr" + mask.optional = true + mask.datatype = "ip4addr" -s:taboption("advanced", DynamicList, "dhcp_option", translate("DHCP-Options"), - translate("Define additional DHCP options, for example \"6,192.168.2.1," .. - "192.168.2.2\" which advertises different DNS servers to clients.")) + s:taboption("advanced", DynamicList, "dhcp_option", translate("DHCP-Options"), + translate("Define additional DHCP options, for example \"6,192.168.2.1," .. + "192.168.2.2\" which advertises different DNS servers to clients.")) -for i, n in ipairs(s.children) do - if n ~= ignore then - n:depends("ignore", "") + for i, n in ipairs(s.children) do + if n ~= ignore then + n:depends("ignore", "") + end end end diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua index b4a442cad..3d0d7550e 100644 --- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua +++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua @@ -12,6 +12,7 @@ You may obtain a copy of the License at $Id$ ]]-- +local fs = require "nixio.fs" local nw = require "luci.model.network" local fw = require "luci.model.firewall" local uci = require "luci.model.uci".cursor() @@ -19,6 +20,8 @@ local http = require "luci.http" local iw = luci.sys.wifi.getiwinfo(http.formvalue("device")) +local has_firewall = fs.access("/etc/config/firewall") + if not iw then luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless")) return @@ -89,25 +92,30 @@ newnet = m:field(Value, "_netname_new", translate("Name of the new network"), newnet.default = m.hidden.mode == "Ad-Hoc" and "mesh" or "wwan" newnet.datatype = "uciname" -fwzone = m:field(Value, "_fwzone", - translate("Create / Assign firewall-zone"), - translate("Choose the firewall zone you want to assign to this interface. Select unspecified to remove the interface from the associated zone or fill out the create field to define a new zone and attach the interface to it.")) +if has_firewall then + fwzone = m:field(Value, "_fwzone", + translate("Create / Assign firewall-zone"), + translate("Choose the firewall zone you want to assign to this interface. Select unspecified to remove the interface from the associated zone or fill out the create field to define a new zone and attach the interface to it.")) -fwzone.template = "cbi/firewall_zonelist" -fwzone.default = m.hidden.mode == "Ad-Hoc" and "mesh" or "wan" + fwzone.template = "cbi/firewall_zonelist" + fwzone.default = m.hidden.mode == "Ad-Hoc" and "mesh" or "wan" +end function newnet.parse(self, section) local net, zone - local value = self:formvalue(section) - local zval = fwzone:formvalue(section) + local value = self:formvalue(section) net = nw:add_network(value, { proto = "dhcp" }) - zone = fw:get_zone(zval) - if not zone and zval == '-' then - zval = m:formvalue(fwzone:cbid(section) .. ".newzone") - if zval and #zval > 0 then - zone = fw:add_zone(zval) + if has_firewall then + local zval = fwzone:formvalue(section) + zone = fw:get_zone(zval) + + if not zone and zval == '-' then + zval = m:formvalue(fwzone:cbid(section) .. ".newzone") + if zval and #zval > 0 then + zone = fw:add_zone(zval) + end end end @@ -165,10 +173,12 @@ function newnet.parse(self, section) end end -function fwzone.cfgvalue(self, section) - self.iface = section - local z = fw:get_zone_by_network(section) - return z and z:name() +if has_firewall then + function fwzone.cfgvalue(self, section) + self.iface = section + local z = fw:get_zone_by_network(section) + return z and z:name() + end end return m -- cgit v1.2.3