| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
luci-mod-admin-full: Add option to set anonymous_identity field
|
|
Check the location of the odhcpd leasefile from /etc/config/dhcp
via uci. Fallback to the default location.
This fixes #702
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Using tristate is counter-intuitive and probably doesn't provide a lot
of benefit so we use a boolean and treat "don't know" as false (because
it is safer than showing options that are not actually available).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Add support for setting the "anonymous_identity" field on EAP type
networks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
|
|
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
|
|
Update timezone data to 2016c.
2016b: http://mm.icann.org/pipermail/tz-announce/2016-March/000036.html
Changes affecting future time stamps
New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04
on 2016-03-27 at 02:00 local time. They need distinct zones since
their post-1970 histories disagree. New zone Asia/Barnaul for Altai
Krai and Altai Republic, Russia, which will switch from +06 to +07
on the same date and local time. Also, Asia/Sakhalin moves from +10
to +11 on 2016-03-27 at 02:00.
As a trial of a new system that needs less information to be made up,
the new zones use numeric time zone abbreviations like "+04"
instead of invented abbreviations like "ASTT".
Haiti will not observe DST in 2016.
Palestine's spring-forward transition on 2016-03-26 is at 01:00,
not 00:00. Guess future transitions will be March's last Saturday
at 01:00, not March's last Friday at 24:00.
2016c: http://mm.icann.org/pipermail/tz-announce/2016-March/000037.html
Changes affecting future time stamps
Azerbaijan no longer observes DST.
Chile reverts from permanent to seasonal DST.
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Note for Openwrt usage:
Either musl or busybox does not like the new timezone format.
Although the rule looks ok in /etc/TZ, timezone is interpreted wrongly
by date, uptime etc. "Old timezones" are handle correctly, but these
new "<+04>-4" style zones do not work. Example below:
Europe/Helsinki
root@OpenWrt:~# cat /etc/TZ
EET-2EEST,M3.5.0/3,M10.5.0/4
root@OpenWrt:~# uptime
11:00:52 up 18:17, load average: 0.43, 0.13, 0.11
root@OpenWrt:~# date
Wed Mar 30 11:00:55 EEST 2016
Europe/Astrakhan
( Time is showed as GMT instead of the correct zone and
zone name is parsed wrongly )
root@OpenWrt:~# cat /etc/TZ
<+04>-4
root@OpenWrt:~# uptime
08:02:52 up 18:19, load average: 0.17, 0.18, 0.13
root@OpenWrt:~# date
Wed Mar 30 08:02:59 +04>-4 2016
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
luci-mod-admin-full: Add option to set wireless interface name
|
|
luci-mod-admin-full: various dnsmasq options
|
|
With mac80211 you can set the wireless interface;
expose this capability.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Add some missing dnsmasq options.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
If dnsmasq with DNSSEC support is enabled, display options
to enable DNSSEC.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Some packages have different variants that have different
capabilities depending on which libraries against which
they are linked. Add a function to check which library a
binary links against in order to determine available
functionality.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Enable reset in LuCI also for ubi based firmwares.
This closes #672
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Sync translations
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Fix a bug introduced by #561
Function 'shellsqescape' calls 'gsub' with the empty result string 'res'
instead of the actual parameter 'value'. This leads into error:
.../util.lua:160: bad argument #1 to 'gsub' (string expected, got nil)
Fix error by passing the correct parameter to the function.
After the fix, the unmount button introduced by #561 finally works.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Fix dhcpv6 ra_management option's handling of "stateless" value.
Default value for the option is 1, so trying to store ""
instead of "0" for stateless is not working.
This fixes #676
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Write an empty crontab file to remove all content
from file /etc/crontabs/root
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
|
|
- Under some conditions the system will shutdown
uhttpd before the page will be delivered to
the client. Waiting one second should eleminate
this behaviour.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also
the 'nat' table for ipv6, and packages like 'adblock' utilize that table.
Currently that table is not shown on the Luci firewall status page,
although it is visible by 'ip6tables -L -v -t nat' from console.
Detect 'nat' table's presence from /proc/net/ip6_tables_names
Show 'nat' table in Status->Firewall->IPv6 if that table is present.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
The version string displayed in the footer and the overview page contains
both LuCI and Openwrt versions. But due to differences in the contents
of /etc/openwrt_release the exact Openwrt revision r..... may be missing:
* In trunk that revision is included in the DISTRIB_DESCRIPTION field that
is displayed in Luci as the Openwrt version.
* In release branches, that field contains the release number like 15.05.
Revision number is always present in DISTRIB_REVISION field, so add the
revision from that field in case the revision is not already present
in the string.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Adjust luci.mk and luci-base to find out correctly if Luci is built
from master or from a branch. Display that value in the footer and
the overview page.
* Evaluate the git branch in luci.mk and pass that to LuCI submodules
as a make variable. Use branch name, ignore tags.
* Deprecate svn detection in luci-base's mkversion.sh that generates
version.lua. Simply use the value passed by make.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
This makes it possible to configure the DSL line from luci.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
This adds a lot of new status information about the dsl line.
It now looks like this on a Telekom line:
Status: UP
Line State: showtime_tc_sync [0x801]
Line Mode: G.993.2 (VDSL2)
Annex: B
Profile: 17a
Data Rate: 51.391 Mb/s / 10.046 Mb/s
Max. Attainable Data Rate (ATTNDR): 63.817 Mb/s / 23.908 Mb/s
Latency: 4.0 ms / 8.0 ms
Line Attenuation (LATN): 10.5 dB / 9.9 dB
Signal Attenuation (SATN): 8.2 dB / 14.4 dB
Noise Margin (SNR): 10.5 dB / 9.7 dB
Aggregate Transmit Power(ACTATP): -14 dB / 12.4 dB
Forward Error Correction Seconds (FECS): 1 / 1723485
Errored seconds (ES): 0 / 2477
Severely Errored Seconds (SES): 0 / 50
Loss of Signal Seconds (LOSS): 0 / 0
Unavailable Seconds (UAS): 31 / 31
Header Error Code Errors (HEC): 0 / 0
Non Pre-emtive CRC errors (CRC_P): 0 / 0
Pre-emtive CRC errors (CRCP_P): 0 / 0
Line Uptime: 2m 3s
ATU-C System Vendor ID: Broadcom 176.15
Power Management Mode: L0 - Synchronized
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
This could also be a VDSL link
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Fall back to default language if "auto" is configured, but none provided by
the browser matches.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
|
|
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Enable setting a host-specific lease time for static hosts.
Format is similar as for the default lease time: e.g. 2m, 12h, 3d, infinite
Default lease time is used for all hosts without host-specific definition.
Support for the option was added to Openwrt trunk by r48801:
https://dev.openwrt.org/changeset/48801
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
radio/checkbox widgets
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
luci-base: fixed tabbed map when using NamedSection of same type
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
* Fix left and right justify/padding in formats
* Do not emit decimal numbers for small values in %m format
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Eliminate more inline scripts in favor to global initialization, use a global
object for sharing fixed strings instead of passing them to each invocation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
* fixed tabbed map when using NamedSection of same sectiontype
* add error message on which tab(s) the invalid/required fields are located
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
|
|
Update timezone data to 2016a.
http://mm.icann.org/pipermail/tz-announce/2016-January/000035.html
Changes affecting future time stamps
America/Cayman will not observe daylight saving this year after all.
Revert our guess that it would. (Thanks to Matt Johnson.)
Asia/Chita switches from +0800 to +0900 on 2016-03-27 at 02:00.
(Thanks to Alexander Krivenyshev.)
Asia/Tehran now has DST predictions for the year 2038 and later,
to be March 21 00:00 to September 21 00:00. This is likely better
than predicting no DST, albeit off by a day every now and then.
Changes affecting past and future time stamps
America/Metlakatla switched from PST all year to AKST/AKDT on
2015-11-01 at 02:00. (Thanks to Steffen Thorsen.)
America/Santa_Isabel has been removed, and replaced with a
backward compatibility link to America/Tijuana. Its contents were
apparently based on a misreading of Mexican legislation.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Sync translations.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
