summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-mod-status/htdocs/luci-static/resources
AgeCommit message (Collapse)Author
2024-11-30luci-mod-status: NOTRACK action for nftables rule renderingPaul Donald
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-11-10luci-mod-status: channel_analysis: detect 40 MHz (20+20 bonded) APsAleksander Jan Bajkowski
At the moment, 40 MHz detection works only for some APs. HT (802.11n) exposes the 40 MHz capability of APs in two ways. The first way is a continuous 40 Mhz band. The second way is two 20MHz bonded channels. Linux detects the presence of 40 MHz by checking the presence of the second channel. It is always absent when the AP supports only 20 MHz. This PR fixes this issue and both ways are supported. First (40 MHz continuous): HT Operation: Primary Channel: 13 Secondary Channel Offset: below Channel Width: 40 MHz or higher Second way (20+20MHz bonded): HT Operation: Primary Channel: 1 Secondary Channel Offset: above Channel Width: 20 MHz Pure 20MHz channel: HT Operation: Primary Channel: 1 Secondary Channel Offset: no secondary Channel Width: 20 MHz Fixes: #6839 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
2024-11-07luci-mod-status: channel_analysis: detect 160 MHz capable APAleksander Jan Bajkowski
Implement a workaround to detect an 160MHz capable AP. It was introduced in the mac80211 in 2016 with 802.11ac Wave 2. APs capable of 160 MHz are detected by the shift of central frequencies. More detailed description in the link [1]. Every AP I have seen presents support for 160 MHz in this way. [1] https://github.com/torvalds/linux/commit/23665aaf9170ae6328cc4f68250c529a628af2ab Fixes: #6262 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
2024-11-05luci-mod-status: rework interface status infoPaul Donald
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-09-18luci-mod-status: break-word for large commands in processesVadim Vetrov
The commit fixes #7280 Signed-off-by: Vadim Vetrov <vetrovvd@gmail.com>
2024-07-23luci-mod-status: display log_file in status if definedChristian Korber
Commit includes wrapper syslog in /usr/libexec. If a log file is configured, the output of this file is displayed. Otherwise the output of logread is displayed. Signed-off-by: Christian Korber <ckorber@tdt.de>
2024-07-08luci-mod-status: log viewers - change focus() to scrollIntoView()Paul Donald
scrollIntoView() is more universally supported and standards tracked. Closes #7186 Updates 9370bdddaede2feeb581193158d83f5062d5a318 Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-07-06luci-mod-status: Set status page "Set Static" for MAC to list typePaul Donald
MACs are list type in DHCP; 1 IP can have multiple MACs Treat IPv6 identically Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-07-06luci-mod-status: Set status page "Set Static" for MAC to list typePaul Donald
MACs are list type in DHCP; 1 IP can have multiple MACs See https://github.com/openwrt/luci/issues/4582#issuecomment-2209390439 Closes #4582 Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-06-24Correctly handle speed = -1Stephen Fenwick
2024-05-20luci-mod-status: fix ordering realtime connections by trafficJo-Philipp Wich
Add raw byte values to properly order rows by transferred bytes, regardless of the dispalyed unit. Fixes: #7129 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2024-05-14luci-mod-status: show lease time on IPv6 networksNicolò Veronese
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
2024-05-08luci-mod-status: fix spellingFlorian Eckert
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-05-01luci-mod-status: auto-refresh system log and kernel logDaniel Nilsson
Signed-off-by: Daniel Nilsson <daniel.nilsson94@outlook.com>
2024-04-23luci-mod-status: connections: add missing cbi-button and cbi-button-apply ↵Florian Eckert
class for lookup button Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: connections: add missing cbi-* css classFlorian Eckert
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: wireless: add missing css cbi-* class elementsFlorian Eckert
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: bandwith: add missing css cbi-* class elementsFlorian Eckert
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: load: add missing cbi-map and cbi-section css classFlorian Eckert
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: add missing cbi-map-descr for realtime graph wirelessFlorian Eckert
Redmine-patch-id: 8466 Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: add missing cbi-map-descr for realtime graph loadFlorian Eckert
Redmine-patch-id: 8465 Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: add missing cbi-map-descr for realtime graph connectionsFlorian Eckert
Redmine-patch-id: 8464 Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-04-23luci-mod-status: add missing cbi-map-descr for realtime graph bandwithFlorian Eckert
Redmine-patch-id: 8463 Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-03-31luci-mod-status: persist sorting of Wi-Fi associated stations tableThomas Schröder
Similar to commit 6039925 from @jow- Add an ID attribute to the dynamically generated Wi-Fi associated stations table to persist row ordering choice across reloads. At the luci-mod-network view, the Wi-Fi associated stations table already has the same id. Signed-off-by: Thomas Schröder <tschroeder_github@outlook.com>
2024-03-27luci-mod-status: fix syslog / dmesg scroll for some themesMiguel Angel Mulero Martinez
The actual code moves the scroll in the window. This works for the bootstrap theme, because the scroll is at window level. But this does not work for other themes, like material. This commit changes the move of the scroll by "focusing" the window in the opposite button element in the syslog / dmesg page. In this way the move is automatically done by the browser. Another solution is to "search" in the parent until we find the scroll and move it, but seems less solid. Signed-off-by: Miguel Angel Mulero Martinez <migmul@gmail.com>
2024-03-04luci-mod-status: fix sporadic logical interfaces resolve failuresJo-Philipp Wich
Correct the incorrect netmask calculation logic leading to incorrect network range comparisons in some cases. Fixes: #6956 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2024-02-18luci-mod-status: BUGFIX: routes: help strings to clarify column titlesThomas Schröder
Adds a missing closing bracket. Signed-off-by: Thomas Schröder <tschroeder_github@outlook.com>
2024-02-17luci-mod-status: routes: help strings to clarify column titlesPaul Donald
Signed-off-by: Paul Donald <newtwen@gmail.com>
2024-02-11luci-mod-status: Adding scroll buttons on syslog and kernellog status pagesRamon Van Gorkom
Signed-off-by: Ramon Van Gorkom <Ramon00c00@gmail.com>
2024-02-08luci-mod-network: put each IPv6 address on a separate lineDavid Härdeman
Right now, when there's active DHCPv6 leases and more than one address per host (e.g. because ULA is used together with GUA prefixes), the two IPv6 addresses will be printed on one line (which may or may not get broken up depending on the length of the addresses, which also looks inconsistent). Putting each address on a separate line makes it much easier to read the addresses (IMHO). Signed-off-by: David Härdeman <david@hardeman.nu>
2023-12-18Merge pull request #6723 from knarrff/channel_analysis__base-channelPaul Donald
luci-mod-status: highlight primary 20 MHz channel
2023-12-10luci-mod-status: channel_analysis: use svg gradFrank Löffler
Instead of using a second, semitransparent quadliteral of the same station color to highlight the main 20 MHz channel of a station with a bandwidht wider than 20 MHz, use a semitransparent, black svg gradient with the same shape and size. This has the benefit that it is harder to mistake for a second, overlain station. The gradient is black because this way it can be reused for all stations, instead of having to create a separate one for each station color. Signed-off-by: Frank Löffler <frank.loeffler@uni-jena.de>
2023-12-07luci-mod-status: channel_analysis: correct VHT 20/40 MHz center channels (#6728)Frank Löffler
* luci-mod-status: add missing vht40 channels As of now, channel_analysis is missing 40 MHz VHT channels. What it does for those right now is display them as 20 MHz channels (both in the plot and the table below), but it uses the center frequency of the 40 MHz channel, which means their (wrong) 20 MHz band in the plot is offset by 2. This fixes #6419. Note that this only occurs for **other** stations. The code for local_wifi is different and already complete. Signed-off-by: Frank Löffler <frank.loeffler@uni-jena.de>
2023-12-07luci-mod-status: add ACL entry for storage indexChristian Marangi
Add missing ACL entry for storage index page. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> luci-mod-status: expand storage index page with mount points Expand storage index page with mount points. For custom mounts point we use the device name and we reference the mount point between (). Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> luci-mod-status: ensure each storage getMountPoints result is unique Signed-off-by: Paul Donald <newtwen@gmail.com> Closes #2767
2023-12-04Merge pull request #6295 from jjm2473/patch-1Paul Donald
luci-mod-status: fix iptables jump on argon theme
2023-11-27luci-mod-status: highlight primary 20 MHz channelFrank Löffler
As of now, channel analysis highlights the complete frequency spectrum of a base station (all channels used by the station, which might be more or fewer depending on channel bonding). This means in particular, that in the plot, a station at one main channel might look identical to another station at a different channel, because both might use the same bonded channel spectrum. One such example is two 80 MHz stations on channels 100 and 108 respectively: both will be plotted from channel 100 up to 115, as both will use those those 80 MHz. This is not incorrect, but it makes it more difficult to see which station is really where, as they might as well switch back to 20 or 40 MHz at times, or for different clients, and where they are then is currently not visible in the plot. This patch adds another trapez to the plot at the main 20 MHz channel of a station, with width 20 MHz, in case the station uses a wider general width. This is visible, because those polygons are partially transparent. It also moves the x-position of the label to the main channel of the station (which now is marked: this would have looked odd before). This does not highlight the primary 40 MHz channel for 80 MHz channels and wider. It should be possible be compute this from the knowledge in luci of the primary 20 MHz channel, the center channel and the bandwidth, assuming ac logic, but I decided against adding it, to keep the plot less cluttered. Signed-off-by: Frank Löffler <frank.loeffler@uni-jena.de>
2023-11-19luci-mod-status: nftables.js: fix translation of iif expressionJo-Philipp Wich
Fixes: https://github.com/openwrt/openwrt/issues/14003 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2023-11-02luci-mod-status: 29_ports.js: mute zone colors for disconnected portsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2023-10-31luci-mod-status: 29_ports.js: handle devices without speed indicationJo-Philipp Wich
Use carrier state to distinguish connected/no link states and simply print "Connected" if no speed indication is available. Fixes: #6663 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2023-10-25luci-mod-status: protect against infinite recursion in port statusJo-Philipp Wich
When attempting to resolve VLAN devices, protect against potential deep recursion due to invalid bridge configs referencing themselves. Fixes: #6648 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2023-10-19luci-mod-status: persist sorting of DHCP lease status tablesJo-Philipp Wich
Add an ID attribute to the dynamically generated lease status tables to persist row ordering choice across reloads. Fixes: #6640 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2023-09-18luci-mod-status: add support for the 6g bandAndre Heider
Enable support for the 6GHz band now that the code supports it. For that it just needs to be added to the "bands" object. Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-09-18luci-mod-status: only add infos if the band matchesAndre Heider
This prevents adding entries to mismatching bands when a channel number exists on more than one band. Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-09-18luci-mod-status: reuse the already provided band infoAndre Heider
iwinfo already provides the band information with every channel, so just use that instead. Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-09-05luci-mod-status: fix iptables not showing commentsLiangbin Lian
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
2023-08-24luci-mod-status: 29_ports.js: attempt to use getBuiltinEthernetPortsJo-Philipp Wich
Try to use the new luci/getBuiltinEthernetPorts RPC call to enumerate known ports and fall back to manual board.json parsing if the call is unavailable yet. The fallback code will be dropped in a while when everything settled. Ref: #6534, #6538 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2023-08-03Merge pull request #6490 from Ansuel/improve-chan-grapJo-Philipp Wich
2023-07-30luci-mod-status: improve channel graph for 5GHz radioChristian Marangi
Improve channel graph for 5GHz radio by using dotted lines to identify the intermediate channel, full line to identify the different channel band and bold line to identify the different section of the wifi channels. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-30luci-mod-status: fix wrong position of channel for 5GHz radioChristian Marangi
Channel tag for 5GHz radios is wrong and is confusing for any user that wants to better identify the used channel from the graph. Add some additional logic to better position the channel tag. Fixes: #6419 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-29luci-mod-status: gracefully handle missing port statsJo-Philipp Wich
Ref: https://github.com/openwrt/luci/commit/cba58fcafbe3a3f4f599354f7c123b546e045887#commitcomment-123043170 Fixes: 4e46624817 ("luci-mod-status: introduce ethernet port status view") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 13:27:50 +0000