Age | Commit message (Collapse) | Author |
|
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3856#comment9797
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Include mtu and igmp_snooping while migrating.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Ensure that the overflow styles are reapplied after a redraw. This also
simplifies the code as a side-effect.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Also ensure that port devices are ordered numerically.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
luci-mod-network: support newer wireless.wifi-device.band option
|
|
The migration code attempted to add new device sections instead of moving
the ifname option to a ports list within the existing ones.
Fixes: #5108
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Restore the display of bridge port device icons in the interface overviews.
This feature has been lost after migrating the network config from legacy
bridge declarations to device bridge declarations.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
OpenWrt switched from "option hwmode" to "option band" in order to select
the frequency band to use for the radio phy.
Extend the channel selector to recognize and use an existing "option band"
to select the appropriate channel list. When operating upon a wireless
configuration still using "option hwmode", then translate it to a band
value internally and translate it back to "option hwmode" on save.
This should provide forward- and backwards compatibility with both current
OpenWrt master and older versions still using hwmode.
Fixes: #5106
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
- Turn IPv4-Address into IPv4 address
- Turn IPv4-Gateway into IPv4 gateway
- Turn IPv6-Address into IPv6 address
- Turn IPv6-Gateway into IPv6 gateway
- Turn MAC-Address into MAC address
Also remove related duplicate translation entries.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
luci-mod-network: interfaces: restructure DHCPv6 and IPv6 RA options
|
|
luci-mod-network: add 802.11ax HE support
|
|
It is legal to have two device sections referring to the same netdev if one
section is a declaration (a section setting option type) and the other is
a configuration (a section not specifying a type but matching an existing
netdev).
Support this case in LuCI since it might be required for some complex
device setups.
Additionally, fix the device type determination for device configuration
sections without type, those should be treated as ethernet (a.k.a.
simple device) configuration instead of falling back to the underlying
netdev device type.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
This commit adds the ability to configure HE-modes for radios
(HE20 / HE40 / HE80 / HE160) as well as HE rate information in the
assiciation view.
Tested-on: Ubiquiti UniFi 6 Lite / LR
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
Treat not explicitly configured, preexisting VLAN interfaces as simple
network devices when adding configuration for them, since it is more
likely that people want to set general device properties such as MAC
address instead of reconfiguring ingress/egress QoS mapping, which is
the only editable property of preexisting VLAN device config dialogs.
Ref: https://github.com/openwrt/luci/issues/5102
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
- Condense overly large IPv6 RA/DHCPv6 description texts and get rid of most embedded markup
- Switch ra/ndp/dhcpv6 mode selections to rich dropdown lists and move extended choice
descriptions next to the selection options
- Drop ndproxy_static option which has been removed from odhcpd long ago
- Add format validations to all text input fields
- Add ability to configure master/relay modes for non-static interfaces (#2998)
- Move extended RA configuration options into a new tab
- Prevent enabling master mode on multiple interfaces
- Prevent enabling ra/dhcpv6 server mode on non-static or master interfaces
- Drop ra_management in favor to ra_flags option (#5083)
- Add support for dns_service option
- Read current effective IPv6 MTU and hop limit placeholder values from procfs
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Update frontend JS code which uses luci-rpc getHostHints to support the new
response format which removes the `ipv4` and `ipv6` host hint string fields
and replaces them with `ipaddrs` and `ip6addrs` weighted string list fields.
Signed-off-by: Niels Widger <niels@qacafe.com>
[rework code to be forwards/backwards compatible, fix some Network.Hosts
methods, fix IP choice ordering, change commit subject, rewrap commit
message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
This is required to resolve conflicts with the existing "device" option
in other proto handlers such as PPP or QMI where "device" refers to the
device path of the tty control device instead of a netdev name.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Ref: #5090
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fixes: #5081
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
It got accidentally added when additional RA and NDP parameters
were added.
Fixes: 504bdb23fb ("luci-mod-network: Introduce new RA and NDP params...")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Link: https://forum.openwrt.org/t/network-migration-21-02-0-rc2/97934
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Fixes: 17af33ee48 ("luci-mod-network: migrate network config depending on netifd version")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
This commit effectively reverts the change made with
907b4222f7 ("luci-mod-network: don't hide "Device" on protocol change").
Floating tunnel protocols such as 6in4, plain PPP over modem device,
VPNC etc. do not have any layer 2 device at all, for such protocols the
device selector should be hidden.
Also swap back the incorrect option order introduced with commit
b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges").
Since device depends on proto, it should come after the protocol selection,
not before.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Commit b7f3cf66ca "luci-mod-network: drop support for *adding* legacy bridges"
dropped the protocol dependcies of the ifname/device selector in the add new
interface dialog.
Re-add the required dependencies and swap the order of the protocol and
device inputs while we're at it since latter depends on the former.
Fixes: b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Problem with handling all migrations in 1 step is that uci.sections()
doesn't include changes queued using uci.callAdd() and uci.callSet().
That could result in unexpected behaviour and generating invalid
configs.
For the sake of simplicity and reliability use 2 steps migration. The
downside is that users may get prompted twice to migrate.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes: 74be304e541f ("treewide: use "device" option in UCI "interface" sections")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Using "device" option requires netifd from 2021-05-26 or newer.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
netifd has been recently patched to use "device" option instead of
"ifname" as more clear & accurate.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Checking netifd version is important for users of the most recent LuCI
that didn't update netifd (e.g. OpenWrt package).
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
LuCI supports only the newer method of specifying bridge ports using the
"ports" option. Offer users migration so they can configure their
network.
Example:
1. Before
config device
option name 'br-lan'
option type 'bridge'
list ifname 'lan1'
list ifname 'lan2'
list ifname 'lan3'
list ifname 'lan4'
2. After
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Fixes: faad7464a8ed ("luci-mod-network: add support for network.device sections")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Device ("ifname" UCI option) doesn't depend on protocol so there is no
need to hide / reset it on protocol change.
While at it drop names of two removed inputs (dead code).
Fixes: ec020cee0c44 ("luci-mod-network: drop support for *editing* legacy bridges")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
LuCI now supports the updated UCI syntax for bridges that requires:
1. device section for L2
2. interface section for L3
Check for legacy syntax usage and offser user a migration to allow
changing network config.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
netifd has been recently patched to use more accurate "ports" option
instead of "ifname"
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
The old way of defining bridge (L2) as part of interface (L3) is
deprecated. All such configs should be migrated to define bridge as L3
UCI section type "device".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
The old way of defining bridge (L2) as part of interface (L3) is
deprecated. Don't support *adding* interfaces like that.
Support for *editing* legacy bridges is kept for now for compatibility
with existing legacy setups.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Fix the handling of optional IPv6 RA and NDP options
that were exposed to LuCI with 504bdb23f
Commit 504bdb23f defined them optional but provided default values.
Those values might get unnecessarily written to /etc/config dhcp when
the the user modifies some other values. Remove the default values,
but provide placeholder for some of them.
Add the missing optional definition to 'ndproxy_routing'.
(It is a flag, so optional default values do not get written to
the config file.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
* fix markup in interfaces.js (#4980)
* sync translations
Signed-off-by: Dirk Brenken <dev@brenken.org>
|
|
New: Router Advertisement parameters and accompanying help-text.
New: 3 additional NDP options and accompanying help-text.
Until now, some of the IPv6 settings are mysterious. They are now
clarified. The information is accessible to IPv6 beginners.
Signed-off-by: Paul Dee <itsascambutmailmeanyway@gmail.com>
|
|
and Global network options ULA.
Relocated the "DHCPv6 Mode" to below RA-Service: DHCPv6-Mode is actually
ra_management in disguise. Better grouping.
Until now, some of the IPv6 settings are mysterious. They are now
clarified. The information is accessible to IPv6 beginners.
Signed-off-by: Paul Dee <itsascambutmailmeanyway@gmail.com>
|
|
Ensure that device sections are only automatically removed after all
related options have been parsed, to avoid prematurely deleting sections.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Introduce a `migrate` properties which selectively allows disabling the
`config interface` to `config device` migration logic for single options.
Use the new flag to disable migration of the "ipv6" option which has
different semantics in interface and device sections.
Ref: https://forum.openwrt.org/t/pppoe-disable-ipv6/92548
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Only disable legacy bridging if an existing network.device section with type
bridge is found, ignore non-type sections since those do not declare a
bridge but set attributes on top of an existing one.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
The existing logic only handled removing the last remaining device section
option (which results in the deletion of the entire section) but failed to
actually unset single options.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
When setting bridge and device specific options such 'stp' or
'igmp_snooping', LuCI so far transparently created or reused a
`config device` section and set the corresponding option there.
In the case of bridges, this triggers multiple problems:
- When implicitely creating a `config device` section referring to the
bridge device, the legacy bridge configuration of the corresponding
interface is disabled, causing a broken configuration on subsequent
save operations
- Netifd does not appear to properly merge bridge settings from config
device and config interface sections, leading to an incoherent
configuration state
In order to avoid that issue, do not automatically migrate bridge specific
options.
Fixes: #4948
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|