summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-mod-admin-full
AgeCommit message (Collapse)Author
2018-03-15Merge pull request #1654 from TDT-AG/pr/20180301-luci-several-fixesJo-Philipp Wich
luci-app-firewall/luci-base/luci-mod-admin-full: some fixes and improvements
2018-03-12treewide: unify mac address handlingJo-Philipp Wich
Use the new luci.ip MAC address facilities to parse and verify MAC addresses in a common way, instead of relying on various ad-hoc solutions. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-03-02luci-base, luci-mod-admin-full: store backup vars in luci configurationJo-Philipp Wich
Keep the ifname and bridge state backup variables in /etc/config/luci to not pollute /etc/config/network. Fixes #1655. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-03-01luci-mod-admin-full: add hint on backup restoreFlorian Eckert
Add a hint to backup restore that files could remain on the system. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-02-04luci-mod-admin-full: prevent unknown sysctl key warnings on status pageJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-20luci-mod-admin-full: fix typos on dhcp pageHannu Nyman
Based on #1568 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-01-13luci-mod-admin-full: set 0 db DSL SNR offset by defaultMathias Kresin
If no DSL SNR offset is set for the dsl line the first entry from the dropdown list is pre-selected by default, which would apply a -10 db offset by default. Pre-select the 0 db option if nothing else is specified in the uci config files. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09luci-mod-admin-full: led config: add support for Switch Port MaskMartin Schiller
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-01-09luci-mod-admin-full: fix incorrect length of DUID-LLArjen de Korte
The length of DUID-LL is 80 bits (16 bit DUID type, 16 bit hardware type, 48 bit mac) which corresponds to 20 nibbles. Also lower the minimum required length of DUID to 20 nibbles in order to allow entering a DUID-LL. Signed-off-by: Arjen de Korte <build+github@de-korte.org>
2018-01-09luci-base: adjust translationsJo-Philipp Wich
- Modify labels for mesh forwarding and 802.11b rate options - Synchronize translations - Complete german base translation Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-09luci-mod-admin-full: Add 802.11b legacy_rates supportSven Roederer
this was added to LEDE with ed62d91f4b5296a4aa883ce975d76f590ef4e910 and defaults to enable. Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
2018-01-09luci-mod-admin-full: Add mesh_fwding supportSven Roederer
* make it only visible for 802.11s mesh-networks * have it enabled by default Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de> [add empty line before meshfwd assignment] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-08luci-mod-admin-full: allow setting DSL SNR offset for VDSLJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-07luci-mod-admin-full: Add meshId supportKishan Gondaliya
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com> [move mode before the SSID / Mesh ID setting] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-03luci-mod-admin-full: remove unused button cbi modelJo-Philipp Wich
Remove the unused admin_system/buttons cbi model. It has been broken, was not exposed in the controller and the corresponding support code which only ever was available for the ath25 target has been dropped in with https://git.lede-project.org/0a3d721in June 2016. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-02luci-mod-admin-full: allow a wider range of DSL SNR marginsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-12-28typo: fileystem --> filesystemHannu Nyman
fix typo: sed -i "s/fileystem/filesystem/" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-12-07Merge pull request #1452 from mkresin/masterJo-Philipp Wich
fix DHCPv6 hostname display
2017-12-04Fix bad argument #1 to 'tonumber'Brian J. Murrell
Fixes [FS#1118](https://bugs.lede-project.org/index.php?do=details&task_id=1118) Luci chokes on devices that do not have _iptables_ installed with: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute function dispatcher target for entry '/'. The called action terminated with an exception: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute firstchild dispatcher target for entry '/admin'. The called action terminated with an exception: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute function dispatcher target for entry '/admin/status'. The called action terminated with an exception: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute template dispatcher target for entry '/admin/status/overview'. The called action terminated with an exception: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'admin_status/index'. A runtime error occured: [string "/usr/lib/lua/luci/view/admin_status/index.h..."]:34: bad argument #1 to 'tonumber' (string expected, got nil) stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:460: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:141: in function </usr/lib/lua/luci/dispatcher.lua:140> The code should be more defensive.
2017-11-17luci-mod-admin-full: indicate DHCPv6 hostname mismatchMathias Kresin
In case the DUID can be mapped to the MAC-Address of an already known host, show the already know hostname next to the DHCPv6 supplied one in case they differ. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-17luci-mod-admin-full: always indicate missing DHCPv6 hostnameMathias Kresin
Don't show a DHCPv6 supplied hostname if none was send. It happens in case the DUID can be mapped to the MAC-Address of an existing host and the existing host has a name set. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-17luci-mod-admin-full: don't replace DHCPv6 hostnameMathias Kresin
Don't replace the DHCPv6 supplied hostname if the DUID can be mapped to the MAC-Address of an already known host. It hides the issue of a missing DHCPv6 hostname and could lead to the conclution that the already known host has an IPv6 address. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-10luci-mod-admin-full: add SNR tweak option to DSLAndrea Merello
Reported-by: Andrea Merello <andrea.merello@gmail.com> [rebase onto master, fix indentation, commit subject, depend on adsl mode] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-11-10luci-mod-admin-full: restrict DSL xfer_mode and line_mode options to VDSL modemsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-11-10luci-mod-admin-full: add DUID option to static leases sectionJan Pavlinec
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz> [add field validation] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-11-06luci-mod-admin-full: wifi.lua: 80211r ft_over_dsLorenzo Santina
Allow user to chose if use FT over DS protocol or FT over the Air protocol for Fast BSS Transition Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
2017-11-06luci-mod-admin-full: wifi.lua: 80211r ft_psk_generate_localLorenzo Santina
Add local generation of PMK when using a PSK. So 802.11r is easier to configure and no inter AP communication is needed any more. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
2017-10-20Merge pull request #1365 from psyborg55/masterJo-Philipp Wich
luci-mod-admin-full: add fontsize style parameter
2017-10-18luci-mod-admin-full: tone down KRACK countermeasure descriptionJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-10-17luci-mod-admin-full: wifi: expose "wpa_disable_eapol_key_retries" optionJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-10-17luci-mod-admin-full: wifi.lua: fix indentationJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-09-13add fontsize style parameterpsyborg55
add fontsize style parameter to reduce output text size Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2017-09-13add fontsize style parameterpsyborg55
add fontsize style parameter to reduce output text size Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2017-08-09[PATCH] luci-mod-admin-full: 802.11r AP-WDS mode enableAnton Engelhardt
Made 802.11r selection availible in AP-WDS mode Signed-off-by: Anton Engelhardt anton@neednow.de
2017-08-07luci-mod-admin-full: add 'auto' xfer_mode to dsl configurationMartin Schiller
This change is needed to support the new default 'auto' xfer_mode setting. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-07-11luci-mod-admin-full: use rpcd-mod-rrdns for reverse DNS lookupsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-23Merge pull request #1182 from kishangondaliya/feature_xJo-Philipp Wich
luci-mod-admin-full: Enable adhoc mode encryption options
2017-06-20Merge pull request #1194 from TDT-GmbH/add-license-tagsHannu Nyman
Add license tags
2017-06-13luci-mod-admin-full: add license tagQuirin Hofstaetter
Signed-off-by: Quirin Hofstaetter <qh@dev.tdt.de>
2017-06-05luci-mod-admin-full: Enable adhoc mode encryption optionsKishan Gondaliya
Currently there are only 2 encryption options visible for adhoc mode. But in netifd, others are also supported and working as expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed mode as encryption options. Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
2017-06-02luci-mod-admin-full: automatically set dns=1 for static leases with hostnameJo-Philipp Wich
Most users likely want the hostname of a static DHCP lease to be resolveable, even if the corresponding host is currently offline. Adjust the form logic to automatically set 'option dns 1' whenever a name is specified in the static lease entry. FIxes LEDE FS#815. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-30luci-mod-admin-full: use "Lease time" instead of "Leasetime" as translation ↵Jo-Philipp Wich
label This allows sharing a common translation string between DHCP and interface pages. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-29luci-mod-admin-full: auto-migrate ifnames when changing VLAN configurationJo-Philipp Wich
This change extends the switch VLAN configuration page to automatically adjust interface ifname options when altering VLAN settings. For example "eth0" is changed to "eth0.1" when a previously untagged LAN VLAN is switched to tagged on the CPU port and vice versa. Notifications are displayed in the page header if an auto migration was performed. This change should make the switch configuration more user friendly and less prone to soft bricking. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-08luci-mod-admin-full: add advice to restart cronHannu Nyman
Cron init script starts the service only if a crontab file exists. If there is no crontab file at boot and the user later creates one, he needs to manually restart the service. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-05-01luci-mod-admin-full: "isolate" option is missing for mac80211fantom-x
Signed-off-by: Marc Benoit marcb6218@gmail.com
2017-04-25luci-mod-admin-full: correct logic for dnsmasq boguspriv keywordmuddyfeet
Prevents deletion of the UCI dns boguspriv keyword and explicitly sets it to either 0 or removes it as the LEDE/Openwrt dnsmasq.conf default is 1 - not 0. This allows boguspriv to be turned off from the GUI. Signed-off-by: Warren Linton <warren@linton.id.au> [Jo-Philipp Wich: squashed commits, updated commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-04-20luci-mod-admin-full: use `nf_conntrack_count` for counting connections (#1114)Jo-Philipp Wich
As suggested by PR #1114, use `/proc/sys/net/netfilter/nf_conntrack_count` instead of counting the lines in `/proc/net/nf_conntrack` but use a slightly more efficient approach which avoids spawning an extra `cat` command. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-03-14luci-mod-admin-full: add advanced force_link optionFlorian Eckert
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-02-28treewide: cleanup references to madwifi from LuCIHannu Nyman
Remove the code related to the deprecated madwifi driver. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-02-28luci-mod-admin-full: new hostapd functionality for 80211w/r detectionHannu Nyman
Use the new hostapd functionality (in LEDE) to detect 802.11r and 802.11w more properly. Leave the old logic in place for Openwrt. Adjust 802.11w default value from "0" to "" in order to avoid unnecessary "option ieee80211w 0" lines in /etc/config/wireless Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 17:37:47 +0000