summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-mod-admin-full
AgeCommit message (Collapse)Author
2016-10-06luci-mod-admin-full: figure out diagnostics host in postinstallJo-Philipp Wich
Attempt to infer the default diagnostics host for nslookup / ping / traceroute from the various URLs in /etc/os-release. Fall back to "openwrt.org" if no host is found to preserve backwards compatibility. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-24luci-mod-admin-full: tweak checksum item presentationHannu Nyman
Simplify the sysupgrade image checksum strings in order to avoid translating "Checksum xxx" items both for MD5 and SHA256. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-19luci-mod-admin-full: show also sha256 checksum for sysupgrade imagesHannu Nyman
Show also the sha256 checksum in addition to MD5 checksum to enable image verification also for builds with only sha256 checksums. If the 'sha256sum' command is not present in the system, the value remains empty. Note: The easiest way to get the 'sha256sum' command is to compile it into busybox. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-18luci-mod-admin-full: properly skip over unused switch portsJo-Philipp Wich
Fix incomplete port status display on vlan setup page when ports in the middle are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so JS code should not attempt to reference an undefined status element for port 3. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-18luci-mod-admin-full: fallback to generic switch topologyJo-Philipp Wich
Use a generic default topology if we cannot infer switch information from board.json and display an error message in this case. Should fix #779 and similar issues. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-15luci-mod-admin-full: use switch toplogy information for vlan setupJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-04luci-mod-admin-full: status page formatting fixJo-Philipp Wich
Display a question mark for undefined SSID and BSSID strings. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-31luci-mod-admin-full: fix net diagnostics with missing configJo-Philipp Wich
Gracefully handle a missing diag section in /etc/config/luci when rendering the network diagnostics tool page. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29luci-mod-admin-full: make diagnostics url customizableFlorian Eckert
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-07-08Merge pull request #743 from HenryGiraldo/masterJo-Philipp Wich
Closes #741: Can't delete disabled wireless networks
2016-06-30luci-mod-admin-full: add log_file and log_proto supportJohn Crispin
Signed-off-by: John Crispin <john@phrozen.org> [Jo-Philipp Wich: remove file datatype constraint] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-16Closes #741: Can't delete disabled wireless networksEnrique Giraldo
When a wireless network is disabled it can't be removed. From wifi_overview.htm the delete call is generated as wlan0, wlan1 or whatever. This wlan is not working because it is disabled, then LuCI deletes the virtual radio which really is named as wlan0.
2016-06-09luci-mod-admin-full/mini: replace Wifi with Wireless in menusHannu Nyman
Replace the menu item "Wifi" by "Wireless", which is already used for page and section headings This closes #695 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-05-23luci-mod-admin-full: Look also if the file /etc/config/fstab exists.Guido Lipke
This pull request adds a condition, which checks whether the file "/etc/config/fstab" exists before it allows access to "mount points". Signed-off-by: Guido Lipke <lipkegu@gmail.com>
2016-05-02Merge pull request #703 from t0t3m1n/fix_snrHannu Nyman
luci-mod-admin-full: fix wrong dsl stats visualization
2016-05-01luci-mod-admin-full: dnsmasq options quietdhcp and sequential_ipHannu Nyman
Add support for dnsmasq uci options 'quietdhcp' and 'sequential_ip' (disable logging, allocate ip addresses sequentially) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-04-18luci-mod-admin-full: fix wrong dsl stats visualizationLuca Debernardi
This patch fixes the wrong visualization of Noise Margin (SNR) and Signal Attenuation (SATN) stats Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
2016-04-07luci-mod-admin-full: Add option to set anonymous_identity fieldKevin O'Connor
Add support for setting the "anonymous_identity" field on EAP type networks. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-03-29Merge pull request #681 from cshore/pull-request-wifi-interface-nameHannu Nyman
luci-mod-admin-full: Add option to set wireless interface name
2016-03-29Merge pull request #680 from cshore/pull-request-dnsmasq-optionsHannu Nyman
luci-mod-admin-full: various dnsmasq options
2016-03-25luci-mod-admin-full: Add option to set wireless interface nameDaniel Dickinson
With mac80211 you can set the wireless interface; expose this capability. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-03-25luci-mod-admin-full: various dnsmasq optionsDaniel Dickinson
Add some missing dnsmasq options. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-03-25luci-mod-admin-full: Add DNSSEC dnsmasq optionDaniel Dickinson
If dnsmasq with DNSSEC support is enabled, display options to enable DNSSEC. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-03-23luci-mod-admin-full: Enable reset in Luci also for ubiHannu Nyman
Enable reset in LuCI also for ubi based firmwares. This closes #672 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-19luci-mod-admin-full: Fix dhcpv6 ra_management option stateless valueHannu Nyman
Fix dhcpv6 ra_management option's handling of "stateless" value. Default value for the option is 1, so trying to store "" instead of "0" for stateless is not working. This fixes #676 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-17luci-mod-admin-full: allow writing empty crontab configFlorian Eckert
Write an empty crontab file to remove all content from file /etc/crontabs/root Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-03-17luci-mod-admin-full: add sleep before sysupgradeJo-Philipp Wich
- Under some conditions the system will shutdown uhttpd before the page will be delivered to the client. Waiting one second should eleminate this behaviour. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-03-16Add support for showing ipv6 NAT table in LuciHannu Nyman
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also the 'nat' table for ipv6, and packages like 'adblock' utilize that table. Currently that table is not shown on the Luci firewall status page, although it is visible by 'ip6tables -L -v -t nat' from console. Detect 'nat' table's presence from /proc/net/ip6_tables_names Show 'nat' table in Status->Firewall->IPv6 if that table is present. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-07luci-mod-admin-full: add dsl configurationHauke Mehrtens
This makes it possible to configure the DSL line from luci. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-03-07luci-mod-admin-full: extend dsl statsHauke Mehrtens
This adds a lot of new status information about the dsl line. It now looks like this on a Telekom line: Status: UP Line State: showtime_tc_sync [0x801] Line Mode: G.993.2 (VDSL2) Annex: B Profile: 17a Data Rate: 51.391 Mb/s / 10.046 Mb/s Max. Attainable Data Rate (ATTNDR): 63.817 Mb/s / 23.908 Mb/s Latency: 4.0 ms / 8.0 ms Line Attenuation (LATN): 10.5 dB / 9.9 dB Signal Attenuation (SATN): 8.2 dB / 14.4 dB Noise Margin (SNR): 10.5 dB / 9.7 dB Aggregate Transmit Power(ACTATP): -14 dB / 12.4 dB Forward Error Correction Seconds (FECS): 1 / 1723485 Errored seconds (ES): 0 / 2477 Severely Errored Seconds (SES): 0 / 50 Loss of Signal Seconds (LOSS): 0 / 0 Unavailable Seconds (UAS): 31 / 31 Header Error Code Errors (HEC): 0 / 0 Non Pre-emtive CRC errors (CRC_P): 0 / 0 Pre-emtive CRC errors (CRCP_P): 0 / 0 Line Uptime: 2m 3s ATU-C System Vendor ID: Broadcom 176.15 Power Management Mode: L0 - Synchronized Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-03-07luci-mod-admin-full: rename ADSL to DSLHauke Mehrtens
This could also be a VDSL link Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-02-26luci-mod-admin-full: host-specific dhcp lease time option for static hostsHannu Nyman
Enable setting a host-specific lease time for static hosts. Format is similar as for the default lease time: e.g. 2m, 12h, 3d, infinite Default lease time is used for all hosts without host-specific definition. Support for the option was added to Openwrt trunk by r48801: https://dev.openwrt.org/changeset/48801 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-02-10luci-mod-admin-full: fix direct package installJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-02-01Identity field is required for EAP-TLS, too.matthewreeve
This patch enables editing the Identity field in EAP-TLS so that EAP-TLS configuration via LuCI works.
2016-01-25luci-mod-admin-full: only offer VHT rates which are actually supported by ↵Jo-Philipp Wich
the driver Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: map DHCPv6 DUIDs to MACsJo-Philipp Wich
Map DUIDs to their corresponding MAC addresses in order to correlate them with IPv4 information. This is useful to e.g. identify IPv6 hosts which do not send a name. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: fix displaying of VHT rates (#533)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: align assoclist in wifi overview with status index pageJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: show more information in assoc list (#540)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: fix device selection in wireless and bandwidth realtime ↵Jo-Philipp Wich
stats Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: fx crash in interface modelJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-19Merge pull request #626 from dangowrt/improve-wpa-eapJo-Philipp Wich
luci-admin-full: improve WPA(2)-Enterprise client support
2016-01-19luci-admin-full: improve WPA(2)-Enterprise client supportDaniel Golle
* add more WPA-EAP phase2 authentication methods. * client cert, client key and key password are only relevant for WPA EAP-TLS, change dependency accordingly. * add support for certificates and key for EAP-TLS phase2 auth. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-01-17luci-mod-admin-full: prevent crash if channel of sta is unknown (#624)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-15luci-mod-admin-full: avoid indexing iw.hwmodelist directlyJo-Philipp Wich
Prevent a nil field access when hwmodelist is undefined. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-18luci-mod-admin-full: interface status page / clarify address displayHannu Nyman
Copy the changes made by f8d0ba00b2ff27dc9e2f10712bc343ae655fbdf9 also to the interface details pages in order to clarify display of multiple addresses. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2015-12-15validation: Add option ipv4only option to host and hostport datatypesDaniel Dickinson
Some applications only support ipv4 so add ipv4only option to host and hostport datatypes so that for thos applications that when an IP address is specified only and ipv4 ip address gets accepted.
2015-12-08luci-mod-admin-full: update IPv4/IPv6 list viewsAlexander Logger
For better view of 'Interface Overview' IPv4/IPv6 addresses for interfaces should be displayed as lists, but not as comma separated strings. Signed-off-by: Alexander Logger <intagger@gmail.com>
2015-12-02luci-mod-admin-full: fstab: Add ability to redo the detection of block devicesDaniel Dickinson
Adds a button that does block detect and write the new configuration to /etc/config/fstab.
2015-12-02luci-mod-admin-full: fstab: Add ability to set global options like anonymous ↵Daniel Dickinson
mounts Previously the global configuration options were missing the the LuCI configuration, however these options are useful, so make them available to the UI.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 07:11:19 +0000