summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-mod-admin-full
AgeCommit message (Collapse)Author
2016-03-23luci-mod-admin-full: Enable reset in Luci also for ubiHannu Nyman
Enable reset in LuCI also for ubi based firmwares. This closes #672 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-19luci-mod-admin-full: Fix dhcpv6 ra_management option stateless valueHannu Nyman
Fix dhcpv6 ra_management option's handling of "stateless" value. Default value for the option is 1, so trying to store "" instead of "0" for stateless is not working. This fixes #676 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-17luci-mod-admin-full: allow writing empty crontab configFlorian Eckert
Write an empty crontab file to remove all content from file /etc/crontabs/root Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-03-17luci-mod-admin-full: add sleep before sysupgradeJo-Philipp Wich
- Under some conditions the system will shutdown uhttpd before the page will be delivered to the client. Waiting one second should eleminate this behaviour. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-03-16Add support for showing ipv6 NAT table in LuciHannu Nyman
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also the 'nat' table for ipv6, and packages like 'adblock' utilize that table. Currently that table is not shown on the Luci firewall status page, although it is visible by 'ip6tables -L -v -t nat' from console. Detect 'nat' table's presence from /proc/net/ip6_tables_names Show 'nat' table in Status->Firewall->IPv6 if that table is present. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-07luci-mod-admin-full: add dsl configurationHauke Mehrtens
This makes it possible to configure the DSL line from luci. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-03-07luci-mod-admin-full: extend dsl statsHauke Mehrtens
This adds a lot of new status information about the dsl line. It now looks like this on a Telekom line: Status: UP Line State: showtime_tc_sync [0x801] Line Mode: G.993.2 (VDSL2) Annex: B Profile: 17a Data Rate: 51.391 Mb/s / 10.046 Mb/s Max. Attainable Data Rate (ATTNDR): 63.817 Mb/s / 23.908 Mb/s Latency: 4.0 ms / 8.0 ms Line Attenuation (LATN): 10.5 dB / 9.9 dB Signal Attenuation (SATN): 8.2 dB / 14.4 dB Noise Margin (SNR): 10.5 dB / 9.7 dB Aggregate Transmit Power(ACTATP): -14 dB / 12.4 dB Forward Error Correction Seconds (FECS): 1 / 1723485 Errored seconds (ES): 0 / 2477 Severely Errored Seconds (SES): 0 / 50 Loss of Signal Seconds (LOSS): 0 / 0 Unavailable Seconds (UAS): 31 / 31 Header Error Code Errors (HEC): 0 / 0 Non Pre-emtive CRC errors (CRC_P): 0 / 0 Pre-emtive CRC errors (CRCP_P): 0 / 0 Line Uptime: 2m 3s ATU-C System Vendor ID: Broadcom 176.15 Power Management Mode: L0 - Synchronized Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-03-07luci-mod-admin-full: rename ADSL to DSLHauke Mehrtens
This could also be a VDSL link Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-02-26luci-mod-admin-full: host-specific dhcp lease time option for static hostsHannu Nyman
Enable setting a host-specific lease time for static hosts. Format is similar as for the default lease time: e.g. 2m, 12h, 3d, infinite Default lease time is used for all hosts without host-specific definition. Support for the option was added to Openwrt trunk by r48801: https://dev.openwrt.org/changeset/48801 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-02-10luci-mod-admin-full: fix direct package installJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-02-01Identity field is required for EAP-TLS, too.matthewreeve
This patch enables editing the Identity field in EAP-TLS so that EAP-TLS configuration via LuCI works.
2016-01-25luci-mod-admin-full: only offer VHT rates which are actually supported by ↵Jo-Philipp Wich
the driver Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: map DHCPv6 DUIDs to MACsJo-Philipp Wich
Map DUIDs to their corresponding MAC addresses in order to correlate them with IPv4 information. This is useful to e.g. identify IPv6 hosts which do not send a name. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: fix displaying of VHT rates (#533)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: align assoclist in wifi overview with status index pageJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: show more information in assoc list (#540)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: fix device selection in wireless and bandwidth realtime ↵Jo-Philipp Wich
stats Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: fx crash in interface modelJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-19Merge pull request #626 from dangowrt/improve-wpa-eapJo-Philipp Wich
luci-admin-full: improve WPA(2)-Enterprise client support
2016-01-19luci-admin-full: improve WPA(2)-Enterprise client supportDaniel Golle
* add more WPA-EAP phase2 authentication methods. * client cert, client key and key password are only relevant for WPA EAP-TLS, change dependency accordingly. * add support for certificates and key for EAP-TLS phase2 auth. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-01-17luci-mod-admin-full: prevent crash if channel of sta is unknown (#624)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-15luci-mod-admin-full: avoid indexing iw.hwmodelist directlyJo-Philipp Wich
Prevent a nil field access when hwmodelist is undefined. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-18luci-mod-admin-full: interface status page / clarify address displayHannu Nyman
Copy the changes made by f8d0ba00b2ff27dc9e2f10712bc343ae655fbdf9 also to the interface details pages in order to clarify display of multiple addresses. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2015-12-15validation: Add option ipv4only option to host and hostport datatypesDaniel Dickinson
Some applications only support ipv4 so add ipv4only option to host and hostport datatypes so that for thos applications that when an IP address is specified only and ipv4 ip address gets accepted.
2015-12-08luci-mod-admin-full: update IPv4/IPv6 list viewsAlexander Logger
For better view of 'Interface Overview' IPv4/IPv6 addresses for interfaces should be displayed as lists, but not as comma separated strings. Signed-off-by: Alexander Logger <intagger@gmail.com>
2015-12-02luci-mod-admin-full: fstab: Add ability to redo the detection of block devicesDaniel Dickinson
Adds a button that does block detect and write the new configuration to /etc/config/fstab.
2015-12-02luci-mod-admin-full: fstab: Add ability to set global options like anonymous ↵Daniel Dickinson
mounts Previously the global configuration options were missing the the LuCI configuration, however these options are useful, so make them available to the UI.
2015-12-02luci-mod-admin-full: Don't show jail bind mountsDaniel Dickinson
The user is unlikely to care about the plethora of jail bind mounts when using jails, so don't display them in this app.
2015-12-02luci-mod-admin-full: fstab: Add ability to unmount non-system mountsDaniel Dickinson
Add an unmount button for non-system mounts which will unmount the corresponding file system.
2015-11-26luci-mod-admin-full: limit SSID to 32 characters (#558)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-21luci-mod-admin-full: fix script regression after ↵Jo-Philipp Wich
152ba9ab228ad4ea4c1748f29fe4ffa5f8f74ac6 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-20luci-mod-admin-full: make mirror port settings depend on mirror enableJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-19luci-mod-admin-full: revert accidential button type change in ↵Jo-Philipp Wich
20fdac1ac4a126ceebde13fb627a9f88bba0e2b3 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-17luci-mod-admin-full: allow empty mac in interface statusJo-Philipp Wich
Also adjust for changed IP address format emitted by iface_status call. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-17luci-mod-admin-full: use :ipaddrs() and :ip6addrs() helper for iface_statusJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-16luci-mod-admin-full: prevent submit with interface delete button (#549)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-06fix a typo error in command script shown to usersRan Bao
Signed-off-by: Ran Bao <worksev@gmail.com>
2015-11-05luci-mod-admin-full: limit interface name length to 15 charsHannu Nyman
Limit the name of a new interface to 15 characters. Add a note about the maximum length and the automatic protocol/bridge prefixes (br-, 6in4-, pppoe- etc.). Reference to: https://dev.openwrt.org/ticket/20380 https://github.com/openwrt/luci/issues/507 There is a 15 character limit to the "real" interface name, enforced both in the firewall and dnsmasq. The real interface name includes the possible prefix "br-", "6in4-" etc. Example of an error: interface name `br-lan_protected' must be shorter than IFNAMSIZ (15) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2015-10-27Move libubus-lua dependency to luci-baseJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-22luci-mod-admin-full: fix invalid markup in packages.htm (#518)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-22luci-mod-admin-full: restructure and fix backup, restore and sysuprade (#517)Jo-Philipp Wich
Do not use standard post security checking for actions that require file upload since reading the token value will trigger parsing of the http message body before the file upload handler has been set, which causes LuCI to buffer the entire request body in memory. In order to simplify the code and logic flow, split action_flashops() into separate handlers for reset, backup, restore and sysupgrade. Let the backup restore and sysupgrade handlers use the new test_post_security() method in luci.dispatcher to perform token checking *after* setting the upload handler. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-21luci-mod-admin-full: do not access dispatcher.context.urltoken in logoutJo-Philipp Wich
The urltoken table is going to be removed. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-20luci-mod-admin-full: protect iptables counter reset and restart with tokenJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-20luci-mod-admin-full: protect network post actions with csrf tokensJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-20luci-mod-admin-full: protect clock, flash and opkg ops with submit tokenJo-Philipp Wich
* Use post_on() target to require csrf token verification for modifying actions * Ensure that package and flash operation handlers guard modifying operations with parameter check Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-07Globally replace luci.dispatcher.build_url(...) with url(...) invocationsJo-Philipp Wich
Also concat multiple string arguments into one while we're at it. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-07luci-mod-admin-full: switch to POST action for rebootJo-Philipp Wich
Also rework the reboot tmeplate a little bit. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-06luci-mod-admin-full: switch to POST actions for UCI changesJo-Philipp Wich
Switches UCI apply/revert/save to CSRF token protected POST actions. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-06Globally convert headline anchors into name attributes.Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-03luci-mod-admin-full: status: survive broken DSL status outputJo-Philipp Wich
Only attempt to call "dsl_func" if the dsl_control lucistat output could be successfully evaluated. Works around https://dev.openwrt.org/ticket/20607 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 18:43:03 +0000