summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-mod-admin-full/luasrc/view
AgeCommit message (Collapse)Author
2018-01-09luci-mod-admin-full: fix incorrect length of DUID-LLArjen de Korte
The length of DUID-LL is 80 bits (16 bit DUID type, 16 bit hardware type, 48 bit mac) which corresponds to 20 nibbles. Also lower the minimum required length of DUID to 20 nibbles in order to allow entering a DUID-LL. Signed-off-by: Arjen de Korte <build+github@de-korte.org>
2017-12-07Merge pull request #1452 from mkresin/masterJo-Philipp Wich
fix DHCPv6 hostname display
2017-12-04Fix bad argument #1 to 'tonumber'Brian J. Murrell
Fixes [FS#1118](https://bugs.lede-project.org/index.php?do=details&task_id=1118) Luci chokes on devices that do not have _iptables_ installed with: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute function dispatcher target for entry '/'. The called action terminated with an exception: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute firstchild dispatcher target for entry '/admin'. The called action terminated with an exception: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute function dispatcher target for entry '/admin/status'. The called action terminated with an exception: /usr/lib/lua/luci/dispatcher.lua:460: Failed to execute template dispatcher target for entry '/admin/status/overview'. The called action terminated with an exception: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'admin_status/index'. A runtime error occured: [string "/usr/lib/lua/luci/view/admin_status/index.h..."]:34: bad argument #1 to 'tonumber' (string expected, got nil) stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:460: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:141: in function </usr/lib/lua/luci/dispatcher.lua:140> The code should be more defensive.
2017-11-17luci-mod-admin-full: indicate DHCPv6 hostname mismatchMathias Kresin
In case the DUID can be mapped to the MAC-Address of an already known host, show the already know hostname next to the DHCPv6 supplied one in case they differ. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-17luci-mod-admin-full: always indicate missing DHCPv6 hostnameMathias Kresin
Don't show a DHCPv6 supplied hostname if none was send. It happens in case the DUID can be mapped to the MAC-Address of an existing host and the existing host has a name set. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-17luci-mod-admin-full: don't replace DHCPv6 hostnameMathias Kresin
Don't replace the DHCPv6 supplied hostname if the DUID can be mapped to the MAC-Address of an already known host. It hides the issue of a missing DHCPv6 hostname and could lead to the conclution that the already known host has an IPv6 address. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-13add fontsize style parameterpsyborg55
add fontsize style parameter to reduce output text size Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2017-09-13add fontsize style parameterpsyborg55
add fontsize style parameter to reduce output text size Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2017-04-20luci-mod-admin-full: use `nf_conntrack_count` for counting connections (#1114)Jo-Philipp Wich
As suggested by PR #1114, use `/proc/sys/net/netfilter/nf_conntrack_count` instead of counting the lines in `/proc/net/nf_conntrack` but use a slightly more efficient approach which avoids spawning an extra `cat` command. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-28treewide: cleanup references to madwifi from LuCIHannu Nyman
Remove the code related to the deprecated madwifi driver. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-02-10luci: ignore '::1' in realtime connectionsEric Luehrsen
luci ignores only 127.0.0.1 in real time connections. The dnsmasq.init script sets up resolv.conf(s) as such. With alternate DNS servers configured 'localhost' will resolve to '127.0.0.1' or '::1'. The connections graph will spam itself. openwrt/luci#996 Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-01-28mod-admin-full: Add IPv6 Prefix Delegation information to Status PagesCody R. Brown
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit: 1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix. 2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD). 3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status: - Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6. - If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present. - If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well. Signed-off-by: Cody R. Brown <dev@codybrown.ca>
2016-12-10luci-mod-admin-{full,mini}: make more distro agnosticHannu Nyman
Remove some non-essential references to explicit distro names. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-09luci-mod-admin-full: handle infinite lease times in outputJo-Philipp Wich
When a lease objects expires property is set to "false", its expiry time is unlimited, so adjust the templates to properly display that state. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-24luci-mod-admin-full: tweak checksum item presentationHannu Nyman
Simplify the sysupgrade image checksum strings in order to avoid translating "Checksum xxx" items both for MD5 and SHA256. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-19luci-mod-admin-full: show also sha256 checksum for sysupgrade imagesHannu Nyman
Show also the sha256 checksum in addition to MD5 checksum to enable image verification also for builds with only sha256 checksums. If the 'sha256sum' command is not present in the system, the value remains empty. Note: The easiest way to get the 'sha256sum' command is to compile it into busybox. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-18luci-mod-admin-full: properly skip over unused switch portsJo-Philipp Wich
Fix incomplete port status display on vlan setup page when ports in the middle are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so JS code should not attempt to reference an undefined status element for port 3. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-15luci-mod-admin-full: use switch toplogy information for vlan setupJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-04luci-mod-admin-full: status page formatting fixJo-Philipp Wich
Display a question mark for undefined SSID and BSSID strings. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-31luci-mod-admin-full: fix net diagnostics with missing configJo-Philipp Wich
Gracefully handle a missing diag section in /etc/config/luci when rendering the network diagnostics tool page. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29luci-mod-admin-full: make diagnostics url customizableFlorian Eckert
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-06-16Closes #741: Can't delete disabled wireless networksEnrique Giraldo
When a wireless network is disabled it can't be removed. From wifi_overview.htm the delete call is generated as wlan0, wlan1 or whatever. This wlan is not working because it is disabled, then LuCI deletes the virtual radio which really is named as wlan0.
2016-04-18luci-mod-admin-full: fix wrong dsl stats visualizationLuca Debernardi
This patch fixes the wrong visualization of Noise Margin (SNR) and Signal Attenuation (SATN) stats Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
2016-03-16Add support for showing ipv6 NAT table in LuciHannu Nyman
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also the 'nat' table for ipv6, and packages like 'adblock' utilize that table. Currently that table is not shown on the Luci firewall status page, although it is visible by 'ip6tables -L -v -t nat' from console. Detect 'nat' table's presence from /proc/net/ip6_tables_names Show 'nat' table in Status->Firewall->IPv6 if that table is present. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-03-07luci-mod-admin-full: extend dsl statsHauke Mehrtens
This adds a lot of new status information about the dsl line. It now looks like this on a Telekom line: Status: UP Line State: showtime_tc_sync [0x801] Line Mode: G.993.2 (VDSL2) Annex: B Profile: 17a Data Rate: 51.391 Mb/s / 10.046 Mb/s Max. Attainable Data Rate (ATTNDR): 63.817 Mb/s / 23.908 Mb/s Latency: 4.0 ms / 8.0 ms Line Attenuation (LATN): 10.5 dB / 9.9 dB Signal Attenuation (SATN): 8.2 dB / 14.4 dB Noise Margin (SNR): 10.5 dB / 9.7 dB Aggregate Transmit Power(ACTATP): -14 dB / 12.4 dB Forward Error Correction Seconds (FECS): 1 / 1723485 Errored seconds (ES): 0 / 2477 Severely Errored Seconds (SES): 0 / 50 Loss of Signal Seconds (LOSS): 0 / 0 Unavailable Seconds (UAS): 31 / 31 Header Error Code Errors (HEC): 0 / 0 Non Pre-emtive CRC errors (CRC_P): 0 / 0 Pre-emtive CRC errors (CRCP_P): 0 / 0 Line Uptime: 2m 3s ATU-C System Vendor ID: Broadcom 176.15 Power Management Mode: L0 - Synchronized Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-03-07luci-mod-admin-full: rename ADSL to DSLHauke Mehrtens
This could also be a VDSL link Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-02-10luci-mod-admin-full: fix direct package installJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: only offer VHT rates which are actually supported by ↵Jo-Philipp Wich
the driver Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: map DHCPv6 DUIDs to MACsJo-Philipp Wich
Map DUIDs to their corresponding MAC addresses in order to correlate them with IPv4 information. This is useful to e.g. identify IPv6 hosts which do not send a name. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-25luci-mod-admin-full: fix displaying of VHT rates (#533)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: align assoclist in wifi overview with status index pageJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: show more information in assoc list (#540)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-mod-admin-full: fix device selection in wireless and bandwidth realtime ↵Jo-Philipp Wich
stats Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-18luci-mod-admin-full: interface status page / clarify address displayHannu Nyman
Copy the changes made by f8d0ba00b2ff27dc9e2f10712bc343ae655fbdf9 also to the interface details pages in order to clarify display of multiple addresses. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2015-12-08luci-mod-admin-full: update IPv4/IPv6 list viewsAlexander Logger
For better view of 'Interface Overview' IPv4/IPv6 addresses for interfaces should be displayed as lists, but not as comma separated strings. Signed-off-by: Alexander Logger <intagger@gmail.com>
2015-11-21luci-mod-admin-full: fix script regression after ↵Jo-Philipp Wich
152ba9ab228ad4ea4c1748f29fe4ffa5f8f74ac6 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-19luci-mod-admin-full: revert accidential button type change in ↵Jo-Philipp Wich
20fdac1ac4a126ceebde13fb627a9f88bba0e2b3 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-17luci-mod-admin-full: allow empty mac in interface statusJo-Philipp Wich
Also adjust for changed IP address format emitted by iface_status call. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-16luci-mod-admin-full: prevent submit with interface delete button (#549)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-22luci-mod-admin-full: fix invalid markup in packages.htm (#518)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-22luci-mod-admin-full: restructure and fix backup, restore and sysuprade (#517)Jo-Philipp Wich
Do not use standard post security checking for actions that require file upload since reading the token value will trigger parsing of the http message body before the file upload handler has been set, which causes LuCI to buffer the entire request body in memory. In order to simplify the code and logic flow, split action_flashops() into separate handlers for reset, backup, restore and sysupgrade. Let the backup restore and sysupgrade handlers use the new test_post_security() method in luci.dispatcher to perform token checking *after* setting the upload handler. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-20luci-mod-admin-full: protect iptables counter reset and restart with tokenJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-20luci-mod-admin-full: protect network post actions with csrf tokensJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-20luci-mod-admin-full: protect clock, flash and opkg ops with submit tokenJo-Philipp Wich
* Use post_on() target to require csrf token verification for modifying actions * Ensure that package and flash operation handlers guard modifying operations with parameter check Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-07Globally replace luci.dispatcher.build_url(...) with url(...) invocationsJo-Philipp Wich
Also concat multiple string arguments into one while we're at it. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-07luci-mod-admin-full: switch to POST action for rebootJo-Philipp Wich
Also rework the reboot tmeplate a little bit. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-06luci-mod-admin-full: switch to POST actions for UCI changesJo-Philipp Wich
Switches UCI apply/revert/save to CSRF token protected POST actions. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-06Globally convert headline anchors into name attributes.Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-10-03luci-mod-admin-full: status: survive broken DSL status outputJo-Philipp Wich
Only attempt to call "dsl_func" if the dsl_control lucistat output could be successfully evaluated. Works around https://dev.openwrt.org/ticket/20607 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-09-16Luci opkg/packages: Show package size in list of available packagesHannu Nyman
Add package *.ipk size information to package listing in Luci, as opkg was today extended to support listing also the size information. Visible fields are now: name, version, size, description That will help users considering installation of a certain package to assess its size impact on flash. Note: Opkg data includes the size of the .ipk file, not the expanded size. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 06:41:28 +0000