summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-base
AgeCommit message (Collapse)Author
2017-02-09luci-base: add hexstring datatypeHannu Nyman
Add datatype 'hexstring' for input validaiton datatypes. It will accept any hexadecimal string. (no length validation, as rangelength can be used for that.) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-02-07Merge pull request #965 from cshore-firmware/pull-request-odhcpd-macDaniel Dickinson
base: status: For odhpcd leases display MAC formatted with colons
2017-01-30luci-base: fix logic errors in ipmask4 and ipmask6 datatype validatorsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-30luci-base: Update Japanese translationINAGAKI Hiroshi
Added and modified some Japanese translations. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2017-01-30luci-base: Sync translationsINAGAKI Hiroshi
Synchronized translations with Lua sources. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2017-01-28mod-admin-full: Add IPv6 Prefix Delegation information to Status PagesCody R. Brown
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit: 1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix. 2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD). 3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status: - Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6. - If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present. - If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well. Signed-off-by: Cody R. Brown <dev@codybrown.ca>
2017-01-26luci-base: Update Japanese translationINAGAKI Hiroshi
Added and modified some translations for Japanese. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2017-01-26i18n: Sync translationsINAGAKI Hiroshi
Synchronized translations with Lua sources. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2017-01-26luci-base: mvalue: fix column wrappingJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-24luci-base: datatypes.lua: add missing parentheses in conditionalJo-Philipp Wich
The missing parens lead to a wrong expression precedence, causing a runtime error when attempting to compare nil with a number. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-23luci-base: ipmask, ipmask4 and ipmask6 validatorsJo-Philipp Wich
These validators accept IP address specifications in the form - address - address/bits - address/netmask Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-23luci-base: datatypes.lua: cleanup white spaceJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-23luci-base: luci.tools.status: properly parse infinite dnsmasq leasesCody R. Brown
The expiry time in a dnsmasq lease file line may be 0 (i.e. expiry date = 01/01/1970 00:00:00 GMT) to denote an infinite lease time, so adjust the code to properly support that. The expiry attribute of the lease object will be set to "false" in case of an infinite lease. This is to mimic the odhcp code below. If the expiry date is not equal to 0, then just do exactly what was done before (return the os.diff of current time and ts). Signed-off-by: Cody R. Brown <dev@codybrown.ca>
2017-01-20base: status: For odhpcd leases display MAC formatted with colonsDaniel Dickinson
This should result in the MAC address display being the same using odhcpd for v4 DHCP as when using DNSMasq for v4 DHCP. Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2017-01-16Merge pull request #953 from musashino205/mount-fix-dispDaniel Dickinson
luci-mod-admin-full: Fix display problems of mount
2017-01-16Merge pull request #917 from aa65535/masterDaniel Dickinson
luci-base:adjust the code order
2017-01-16Merge pull request #946 from chloe-jeong/trunk-koDaniel Dickinson
Updates korean languages.
2017-01-16luci-base: sync translationsINAGAKI Hiroshi
Recently a string to be translated were added to Lua source, so I synchronized po templates and po file of each language with Lua source. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2017-01-14luci-base: Updates korean language.Weongyo Jeong
Signed-off-by: Weongyo Jeong <weongyo@gmail.com>
2017-01-11i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-01-10Merge pull request #930 from cshore-firmware/pull-request-fix-webadminDaniel Dickinson
base: webadmin: Don't take substring of nil variable
2017-01-07Merge pull request #923 from kuoruan/i18n-zh-cnHannu Nyman
Update Simplified Chinese translation
2017-01-07luci-base: Update Simplified Chinese translationHsing-Wang Liao
Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
2017-01-05luci-base: update LuaSrcDiet download locationHannu Nyman
Update the googlecode download address to the current one. Change hash to SHA256 at the same time. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-01-03luci-base:adjust the code orderJian Chang
The `cbi_validate_field` should be after data initialized. Signed-off-by: Jian Chang <aa65535@live.com>
2016-12-30base: webadmin: Don't take substring of nil variableDaniel Dickinson
When converting interface names to UCI network names webadmin fails if there is no UCI network name because webadmin failed to ensure uciname has a value before attempting to take a substring. Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-12-22i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-21luci-base: luci.sys.iptparser: properly check for table supportJo-Philipp Wich
Do not assume that the "raw" table is present on any system, instead check /proc/net/ip{,6}_tables_names to determine which iptables tables are available. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-21Fix a few typos in Czech translationjose1711
Signed-off-by: Jose Riha <jose1711@gmail.com>
2016-12-20Merge pull request #884 from chloe-jeong/trunk-koHannu Nyman
Adds Korean translation.
2016-12-20Adds Korean translation.Weongyo Jeong
Adds Korean language supported for Luci of OpenWRT. Most of msgs which shown at UI are translated but still not completed for non-popular features. Signed-off-by: Weongyo Jeong <weongyo@gmail.com>
2016-12-16luci-base: Update Japanese translationmusashino205
Signed-off-by: musashino205 <musashino.open@gmail.com>
2016-12-16luci-base: Update Japanese translationmusashino205
Signed-off-by: musashino205 <musashino.open@gmail.com>
2016-12-10i18n: fix some sysupgrade related string translationsHannu Nyman
Fix translated strings broken by recent changes. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-10i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-10Merge pull request #663 from NeoRaider/styleable-checkboxesDaniel Dickinson
luci-base: view: make checkboxes and radio buttons styleable
2016-12-10Fix config files getting overwritten in opkg installHannu Nyman
Commit 39ff053890 accidentally removed the conffiles definitions from luci-base, statistics, splash and diag-devinfo apps. That has caused existing config files to get overwritten if the package has been reinstalled via opkg. Additionally, the splash text files have not been saved in sysupgrade or backup as they are located outside /etc/config This commit adds back the conffiles definitions to the respective packages. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-09time zone data: Update to 2016jHannu Nyman
Changes: Saratov, Russia switches from +03 to +04 on 2016-12-04 at 02:00. This hives off a new zone Europe/Saratov from Europe/Volgograd. The new zone Asia/Atyrau for Atyraū Region, Kazakhstan, is like Asia/Aqtau except it switched from +04/+05 to +05/+06 in spring 1999, not fall 1994. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-09luci-base: luci.tools.status: properly parse infinite odhcpd leasesJo-Philipp Wich
The expiry time in an odhcpd lease file line may be -1 to denote an infinite lease time, so adjust the code to properly support that. The expiry attribute of the lease object will be set to "false" in case of an infinite lease. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-08time zone data: Update to 2016iHannu Nyman
Note that several of the time zones now use a numeric name that is quoted with < > (e.g. "<+03>-3") musl 1.1.15 and earlier have a bug with < > quoted time zone names. Fix for the bug * has already been patched in musl upstream with http://git.musl-libc.org/cgit/musl/commit/?id=8ca27ac4bfe73bff785d0c26c1de0da92b55e5c6 * has been committed in LEDE with https://github.com/lede-project/source/commit/671cb35880308404a17c430c4b3b13dd506a5671 * has been submitted to Openwrt as pull request https://github.com/openwrt/openwrt/pull/163 Key changes in 2016d-2016i: --------------------------- 2016d: America/Caracas switches from -0430 to -04 on 2016-05-01. Asia/Magadan switches from +10 to +11 on 2016-04-24. New zone Asia/Tomsk, split off from Asia/Novosibirsk. 2016f: Asia/Novosibirsk switches from +06 to +07 on 2016-07-24. Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone abbreviations instead of invented ones. 2016g: Turkey switched from EET/EEST (+02/+03) to permanent +03, effective 2016-09-07. Use "+03" rather than an invented abbreviation for the new time. Several zones in Antarctica and the former Soviet Union, along with zones intended for ships at sea that cannot use POSIX TZ strings, now use numeric time zone abbreviations instead of invented or obsolete alphanumeric abbreviations. 2016h: Asia/Gaza and Asia/Hebron end DST on 2016-10-29, not 2016-10-21. Predict that future fall transitions will be on the last Saturday of October. Asia/Colombo now uses numeric time zone abbreviations like "+0530" instead of alphabetic ones like "IST" and "LKT". 2016i: Pacific/Tongatapu begins DST on 2016-11-06, ending on 2017-01-15. Assume future observances in Tonga will be from the first Sunday in November through the third Sunday in January, like Fiji. Switch to numeric time zone abbreviations for this zone. Northern Cyprus is now +03 year round, causing a split in Cyprus time zones starting 2016-10-30 at 04:00. This creates a zone Asia/Famagusta. Antarctica/Casey switched from +08 to +11 on 2016-10-22. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-30i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-23i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-09luci-base: use default install paths for host utilsMatthias Schiffer
This reverts commit d4c33720208346ee7983213fe764df3102b8a771. PATH inconsistencies and Host/Install arguments have been fixed in both LEDE and OpenWrt, so we can revert the revert. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-06luci-base: remove default diag host from /etc/config/luciJo-Philipp Wich
Now that luci-mod-admin-full figures out the proper diagnostics host during postinstall we can remove the UCI section from the default configuration file. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05Revert "luci-base: use default install paths for host utils"Jo-Philipp Wich
This reverts commit 87a7570690f7aeffb1aff01f320973c9acb668d3. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05Revert "luci-base: fix luci-base host tool install on OpenWrt"Jo-Philipp Wich
This reverts commit f7639bcd6a2caf7cc0f03e85744906c577eefeab. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-04luci-base: fix luci-base host tool install on OpenWrtMatthias Schiffer
OpenWrt doesn't provide an argument to Host/Install like LEDE does; use HOST_BUILD_PREFIX instead, which is available on both. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-03luci-base: use default install paths for host utilsMatthias Schiffer
Also, don't make any assumptions about the staging dir lua and LuaSrcDiet were installed to. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-08-25Merge pull request #782 from Ansuel/masterHannu Nyman
Fix some capital and add some translation
2016-08-24Fix some capital and add some translationBuildTools
Hope this time I have done a good work
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 21:00:35 +0000