summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-base/root
AgeCommit message (Collapse)Author
2019-09-10luci-base: use cgi-io and rpcd-mod-file to handle file upload and browsingJo-Philipp Wich
Remove the old server side support for file browsing and file uploading and switch to a client side widget instead which uses XMLHTTPRequests to upload files via cgi-io and RPC calls for file listing and status queries. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: network.js: fix, rework and improve wireless state handlingJo-Philipp Wich
- Use new getWirelessDevices rpc method to optimize data fetching - Implement further getters to access iwinfo information - Implement assoc- and scan list functions - Simplify internal data model Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: add getWirelessDevices() rpc methodJo-Philipp Wich
The getWirelessDevices() method merges the results of the network.wireless/status call with corresponding per-radio and per-network iwinfo data. This allows to simplify the client side network state model implementation and saves extraneous rpc roundtrips to fetch iwinfo data after discovering the wireless devices. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: rpcd: add getHostname and getTTYDevices callsJo-Philipp Wich
Also add IPv6 feature indication. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-15luci-base: add rpc feature tests for sysntpd and zramJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-app-firewall: honour global default policies in per-zone settingsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-base: rpc: drop offload_support callJo-Philipp Wich
It is superseded by the more generic getFeatures method. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-base: luci.js: introduce hasSystemFeature() apiJo-Philipp Wich
The new function allows querying the presence of certain system features such as dnsmasq or firewall availability or the compile time features of hostapd and wpa_supplicant. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-base: network.js: support dynamically loaded protocol classesJo-Philipp Wich
Port the existing server side protocol support framework to the client side network.js. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-01luci-base: index.html: add extend cache-control directiveJo-Philipp Wich
Fixes: #2942 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-22luci-base: remove accidentally committed codeJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-22luci-base: add conntrack_helpers ubus procedureJo-Philipp Wich
Also move firewall specific ACLs into separate group. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-08luci-base,luci-mod-system: split ubus localtime into get and set callJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-08luci-base: add rpcd ACL rulesJo-Philipp Wich
Add required ACL rules to allow access to the native ubus HTTP interface directly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-07luci-base: implement further ubus callsJo-Philipp Wich
Implement new ubus rpcd backend calls for later use in the frontend: - netdevs: dump information about Linux network devices present - boardjson: dump /etc/board.json if present - offload_support: query whether netfilter offloading is supported Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-07luci-base: implement lease status ubus callJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-07luci-base: add rpcd backend pluginJo-Philipp Wich
Add an rpcd executable plugin containing procedures required by client side views. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-10-10luci-base: redirect root path to /cgi-bin/luci/xiongjie
Fix openwrt/luci#1062 Signed-off-by: MonwF <boluo2@gmail.com>
2018-07-16Merge pull request #952 from ↵Jo-Philipp Wich
cshore-history/pull-request-fstab-avoid-block-umount-on-apply luci-base: Avoid block umount on fstab apply
2018-05-18Merge pull request #1769 from jow-/masterJo-Philipp Wich
UCI apply/rollback workflow
2018-05-07luci-base: reload log on uci system changeFlorian Eckert
If log configuration get changed in uci system no new values are applied until reboot. Add /etc/init.d/log reload to exec option will solve this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-05-05luci-base: add transitional /etc/init.d/ucitrackJo-Philipp Wich
Ship an /etc/init.d/ucitrack for spawning a virtual service with the sole purpose to track the configurations and dependencies formerly handled by luci-reload. Once all LuCI supported services ship with procd compatible init scripts, the uci track support can be dropped. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-05-05treewide: rework uci apply workflowJo-Philipp Wich
Switch to rpcd based uci apply/rollback workflow which helps to avoid soft- bricking devices by requiring an explicit confirmation call after config apply. When a user now clicks "Save & Apply", LuCI first issues a call to uci apply which commits and reloads configuration, then goes into a polling countdown mode where it repeatedly attempts to call uci confirm. If the committed configuration is sane, the confirm call will go through and cancel rpcd's pending rollback timer. If the configuration change leads to a loss of connectivity (e.g. due to bad firewall rules or similar), the rollback mechanism will kick in after the timeout and revert configuration files and pending changes to the pre-apply state. In order to cover such rare cases where a lost of connectivity is expected and desired, the user is offered an "unchecked" apply option after timing out, which allows committing and applying the changes anyway, without the extra safety checks. As a consequence of this change, the luci-reload mechanism is now completely unsused since rpcd uses ubus config reload signals to reload affected services, which means that only procd-enabled services will receive proper reload treatment with the new workflow. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-04-21luci-base: ship rpcd uci access ACLJo-Philipp Wich
Ship an ACL definition for granting full read/write access to uci configuration files via ubus rpc. This is a precondition for enabling uci session isolation later on. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-21luci-base: add dhcp to system ucitrackFlorian Eckert
If hostname get changed in "/etc/config/system" dnsmasq should reloaded his config to be reached again under the URL [HOSTNAME].lan Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2017-01-15luci-base: Avoid block umount on fstab applyDaniel Dickinson
Default behaviour of changes to fstab (Mount Points) was to use /etc/init.d/fstab restart, however this unmounts filesystems via block umount which can cause the device to fail, so replace the initscript call with an exec of 'block mount'. Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-10-06luci-base: remove default diag host from /etc/config/luciJo-Philipp Wich
Now that luci-mod-admin-full figures out the proper diagnostics host during postinstall we can remove the UCI section from the default configuration file. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29luci-mod-admin-full: make diagnostics url customizableFlorian Eckert
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-05-25luci-base: remove deprecated 6relayd from ucitrackHannu Nyman
Cleanup /etc/config/ucitrack by removing '6relayd' item, as the whole 6relayd package was removed in 2014. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-01-11luci-base: properly handle ubus connections for non-root (#570, #571)Jo-Philipp Wich
Instead of relying on the connect-before-setuid hack, ship a proper acl definition file whitelisting the procedures that LuCI requires on its non-root pages. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-12modules/luci-base: Move LuCI FileUpload directory to /etc/luci-uploads and ↵Daniel Dickinson
save across sysupgrade /lib/uci/upload is a rather odd place for configuration files Also the files were not saved across sysupgrade, which is somewhat counter-productive for configuration files. Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
2015-09-29luci-base: change index.html to be more like current themesHannu Nyman
Change index.html that is visible for a second when entering Luci: * Black text on white background (instead of white on black) * Specify font as Arial/Helvetica Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2015-09-18luci-base: set default mediaurlbase to bootstrap (current default theme)Hannu Nyman
The mediaurlbase option in the default /etc/config/luci still points to the old openwrt.org theme that is not installed by default. The discrepancy was noted in the commit message for 55ab4e4ce22 After 55ab4e4ce22 the installed theme's uci-defaults script will correct the setting at first boot, but we should not have a deprecated theme as the default value. Set the default value to the default theme 'bootstrap'. Related old discussion at #302 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2015-05-26luci-base: rename .gitignore to .placeholderJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-05-18luci-base: Add cache control in index.html nightcoffee
Signed-off-by: Night Coffee <ydkf@qq.com>
2015-01-08Rework LuCI build systemJo-Philipp Wich
* Rename subdirectories to their repective OpenWrt package names * Make each LuCI module its own standalone package * Deploy a shared luci.mk which is used by each module Makefile Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 17:29:10 +0000