summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-base/root
AgeCommit message (Collapse)Author
2019-11-01luci-base, luci-mod-network: migrate luci/getDHCPLeases to C pluginJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-11-01luci-base: migrate luci/getBoardJSON to C pluginJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-10-16Merge pull request #3145 from ptpt52/refine-flash-resetJo-Philipp Wich
luci-mod-system: refine flash reset
2019-10-11luci-base: widgets.js: add user and group selectRichard Yu
Signed-off-by: Richard Yu <yurichard3839@gmail.com>
2019-10-07luci-mod-system: refine flash resetChen Minqiang
We determine flash reset capability by checking overlayfs in /proc/mounts Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2019-10-07luci-base: add reboot rpc callJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-10-02luci-mod-system: flash.js: fix "rootfs_data" partition detectionJo-Philipp Wich
The `/sys/devices/virtual/mtd/` information is not available on all devices so rely on the contents of `/proc/mtd` instead to check for the existence of the `rootfs_data` partition. Fixes: #3136 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-10-02luci-mod-system: use "system" new "validate_firmware_image" ubus methodRafał Miłecki
This new ubus method provides more properly-formatted details about firmware file. Use it to check if uploaded image is valid. The old "sysupgrade --test" method is left for now to provide stderr output. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [Added missing ACL, add default value for the ubus failure case] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-24luci-mod-system: reimplement flashops as client side viewJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-21luci-mod-system: remplement fstab settings as client side viewJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-21luci-base: add rpc methods for mount managementJo-Philipp Wich
This commit introduces the new methods luci/getBlockDevices, luci/setBlockDetect, luci/getMountPoints, luci/setUmount in preparation for the reworked mount point management. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-16luci-mod-system: remplement password change as client side viewJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-15luci-mod-system: reimplement SSH key mgmt as client side viewJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-16luci-base: add luci/setPassword rpc method, dropbear feature flagJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-12luci-mod-system: reimplent system/crontab as client side viewJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-12luci-base: whitelist file/write actions on /etc/rc.localJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-12luci-base: add luci/getSwconfigFeatures and luci/getSwconfigPortStateJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: replace luci/getHostname with generic file/read rpc operationJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10protocols: replace luci/getTTYDevices calls with generic file/list onesJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: add hostapd/wpa_supplicant cli feature flagsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-mod-network: switch to client side wifi configuration pagesJo-Philipp Wich
Rewrite the wireless network management views in client side JS using ubus rpc calls for the router communication. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: use cgi-io and rpcd-mod-file to handle file upload and browsingJo-Philipp Wich
Remove the old server side support for file browsing and file uploading and switch to a client side widget instead which uses XMLHTTPRequests to upload files via cgi-io and RPC calls for file listing and status queries. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: network.js: fix, rework and improve wireless state handlingJo-Philipp Wich
- Use new getWirelessDevices rpc method to optimize data fetching - Implement further getters to access iwinfo information - Implement assoc- and scan list functions - Simplify internal data model Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: add getWirelessDevices() rpc methodJo-Philipp Wich
The getWirelessDevices() method merges the results of the network.wireless/status call with corresponding per-radio and per-network iwinfo data. This allows to simplify the client side network state model implementation and saves extraneous rpc roundtrips to fetch iwinfo data after discovering the wireless devices. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-10luci-base: rpcd: add getHostname and getTTYDevices callsJo-Philipp Wich
Also add IPv6 feature indication. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-15luci-base: add rpc feature tests for sysntpd and zramJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-app-firewall: honour global default policies in per-zone settingsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-base: rpc: drop offload_support callJo-Philipp Wich
It is superseded by the more generic getFeatures method. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-base: luci.js: introduce hasSystemFeature() apiJo-Philipp Wich
The new function allows querying the presence of certain system features such as dnsmasq or firewall availability or the compile time features of hostapd and wpa_supplicant. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-14luci-base: network.js: support dynamically loaded protocol classesJo-Philipp Wich
Port the existing server side protocol support framework to the client side network.js. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-01luci-base: index.html: add extend cache-control directiveJo-Philipp Wich
Fixes: #2942 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-22luci-base: remove accidentally committed codeJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-22luci-base: add conntrack_helpers ubus procedureJo-Philipp Wich
Also move firewall specific ACLs into separate group. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-08luci-base,luci-mod-system: split ubus localtime into get and set callJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-08luci-base: add rpcd ACL rulesJo-Philipp Wich
Add required ACL rules to allow access to the native ubus HTTP interface directly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-07luci-base: implement further ubus callsJo-Philipp Wich
Implement new ubus rpcd backend calls for later use in the frontend: - netdevs: dump information about Linux network devices present - boardjson: dump /etc/board.json if present - offload_support: query whether netfilter offloading is supported Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-07luci-base: implement lease status ubus callJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-07-07luci-base: add rpcd backend pluginJo-Philipp Wich
Add an rpcd executable plugin containing procedures required by client side views. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-10-10luci-base: redirect root path to /cgi-bin/luci/xiongjie
Fix openwrt/luci#1062 Signed-off-by: MonwF <boluo2@gmail.com>
2018-07-16Merge pull request #952 from ↵Jo-Philipp Wich
cshore-history/pull-request-fstab-avoid-block-umount-on-apply luci-base: Avoid block umount on fstab apply
2018-05-18Merge pull request #1769 from jow-/masterJo-Philipp Wich
UCI apply/rollback workflow
2018-05-07luci-base: reload log on uci system changeFlorian Eckert
If log configuration get changed in uci system no new values are applied until reboot. Add /etc/init.d/log reload to exec option will solve this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-05-05luci-base: add transitional /etc/init.d/ucitrackJo-Philipp Wich
Ship an /etc/init.d/ucitrack for spawning a virtual service with the sole purpose to track the configurations and dependencies formerly handled by luci-reload. Once all LuCI supported services ship with procd compatible init scripts, the uci track support can be dropped. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-05-05treewide: rework uci apply workflowJo-Philipp Wich
Switch to rpcd based uci apply/rollback workflow which helps to avoid soft- bricking devices by requiring an explicit confirmation call after config apply. When a user now clicks "Save & Apply", LuCI first issues a call to uci apply which commits and reloads configuration, then goes into a polling countdown mode where it repeatedly attempts to call uci confirm. If the committed configuration is sane, the confirm call will go through and cancel rpcd's pending rollback timer. If the configuration change leads to a loss of connectivity (e.g. due to bad firewall rules or similar), the rollback mechanism will kick in after the timeout and revert configuration files and pending changes to the pre-apply state. In order to cover such rare cases where a lost of connectivity is expected and desired, the user is offered an "unchecked" apply option after timing out, which allows committing and applying the changes anyway, without the extra safety checks. As a consequence of this change, the luci-reload mechanism is now completely unsused since rpcd uses ubus config reload signals to reload affected services, which means that only procd-enabled services will receive proper reload treatment with the new workflow. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-04-21luci-base: ship rpcd uci access ACLJo-Philipp Wich
Ship an ACL definition for granting full read/write access to uci configuration files via ubus rpc. This is a precondition for enabling uci session isolation later on. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-21luci-base: add dhcp to system ucitrackFlorian Eckert
If hostname get changed in "/etc/config/system" dnsmasq should reloaded his config to be reached again under the URL [HOSTNAME].lan Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2017-01-15luci-base: Avoid block umount on fstab applyDaniel Dickinson
Default behaviour of changes to fstab (Mount Points) was to use /etc/init.d/fstab restart, however this unmounts filesystems via block umount which can cause the device to fail, so replace the initscript call with an exec of 'block mount'. Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-10-06luci-base: remove default diag host from /etc/config/luciJo-Philipp Wich
Now that luci-mod-admin-full figures out the proper diagnostics host during postinstall we can remove the UCI section from the default configuration file. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29luci-mod-admin-full: make diagnostics url customizableFlorian Eckert
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-05-25luci-base: remove deprecated 6relayd from ucitrackHannu Nyman
Cleanup /etc/config/ucitrack by removing '6relayd' item, as the whole 6relayd package was removed in 2014. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 11:24:09 +0000