| Age | Commit message (Collapse) | Author |
|---|
|
Add datatype 'hexstring' for input validaiton datatypes.
It will accept any hexadecimal string.
(no length validation, as rangelength can be used for that.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
base: status: For odhpcd leases display MAC formatted with colons
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
The missing parens lead to a wrong expression precedence, causing a runtime
error when attempting to compare nil with a number.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
These validators accept IP address specifications in the form
- address
- address/bits
- address/netmask
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
The expiry time in a dnsmasq lease file line may be 0 (i.e.
expiry date = 01/01/1970 00:00:00 GMT) to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false"
in case of an infinite lease. This is to mimic the odhcp code below.
If the expiry date is not equal to 0, then just do exactly what was
done before (return the os.diff of current time and ts).
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
|
|
This should result in the MAC address display being the same
using odhcpd for v4 DHCP as when using DNSMasq for v4 DHCP.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
|
|
When converting interface names to UCI network names
webadmin fails if there is no UCI network name because
webadmin failed to ensure uciname has a value before
attempting to take a substring.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
|
|
Do not assume that the "raw" table is present on any system, instead check
/proc/net/ip{,6}_tables_names to determine which iptables tables are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
luci-base: view: make checkboxes and radio buttons styleable
|
|
Changes:
Saratov, Russia switches from +03 to +04 on 2016-12-04 at 02:00.
This hives off a new zone Europe/Saratov from Europe/Volgograd.
The new zone Asia/Atyrau for Atyraū Region, Kazakhstan, is like
Asia/Aqtau except it switched from +04/+05 to +05/+06 in spring
1999, not fall 1994.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
The expiry time in an odhcpd lease file line may be -1 to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false" in case of an
infinite lease.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Note that several of the time zones now use a numeric name
that is quoted with < > (e.g. "<+03>-3")
musl 1.1.15 and earlier have a bug with < > quoted time zone names.
Fix for the bug
* has already been patched in musl upstream with
http://git.musl-libc.org/cgit/musl/commit/?id=8ca27ac4bfe73bff785d0c26c1de0da92b55e5c6
* has been committed in LEDE with
https://github.com/lede-project/source/commit/671cb35880308404a17c430c4b3b13dd506a5671
* has been submitted to Openwrt as pull request
https://github.com/openwrt/openwrt/pull/163
Key changes in 2016d-2016i:
---------------------------
2016d:
America/Caracas switches from -0430 to -04 on 2016-05-01.
Asia/Magadan switches from +10 to +11 on 2016-04-24.
New zone Asia/Tomsk, split off from Asia/Novosibirsk.
2016f:
Asia/Novosibirsk switches from +06 to +07 on 2016-07-24.
Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone
abbreviations instead of invented ones.
2016g:
Turkey switched from EET/EEST (+02/+03) to permanent +03,
effective 2016-09-07. Use "+03" rather than an invented
abbreviation for the new time.
Several zones in Antarctica and the former Soviet Union, along
with zones intended for ships at sea that cannot use POSIX TZ
strings, now use numeric time zone abbreviations instead of
invented or obsolete alphanumeric abbreviations.
2016h:
Asia/Gaza and Asia/Hebron end DST on 2016-10-29, not
2016-10-21. Predict that future fall transitions will
be on the last Saturday of October.
Asia/Colombo now uses numeric time zone abbreviations like "+0530"
instead of alphabetic ones like "IST" and "LKT".
2016i:
Pacific/Tongatapu begins DST on 2016-11-06, ending on
2017-01-15. Assume future observances in Tonga will be
from the first Sunday in November through the third Sunday in
January, like Fiji. Switch to numeric time zone abbreviations
for this zone.
Northern Cyprus is now +03 year round, causing a split in Cyprus
time zones starting 2016-10-30 at 04:00. This creates a zone
Asia/Famagusta.
Antarctica/Casey switched from +08 to +11 on 2016-10-22.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Wireless monitor interfaces usually have no SSID set in their config and
various network model utility functions did not handle this case properly,
mainly while trying to incorperate the SSID string into various description
labels.
Fall back to the internal network id (radioX.networkY) in cases where neither
the SSID nor the BSSID are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
In mod metamethod, execute string format under pcall() and rethrow error in
caller context to report caller of function in errors and not the meta
method itself.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
change spaces to tabs
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Check the location of the odhcpd leasefile from /etc/config/dhcp
via uci. Fallback to the default location.
This fixes #702
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Using tristate is counter-intuitive and probably doesn't provide a lot
of benefit so we use a boolean and treat "don't know" as false (because
it is safer than showing options that are not actually available).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
|
|
Update timezone data to 2016c.
2016b: http://mm.icann.org/pipermail/tz-announce/2016-March/000036.html
Changes affecting future time stamps
New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04
on 2016-03-27 at 02:00 local time. They need distinct zones since
their post-1970 histories disagree. New zone Asia/Barnaul for Altai
Krai and Altai Republic, Russia, which will switch from +06 to +07
on the same date and local time. Also, Asia/Sakhalin moves from +10
to +11 on 2016-03-27 at 02:00.
As a trial of a new system that needs less information to be made up,
the new zones use numeric time zone abbreviations like "+04"
instead of invented abbreviations like "ASTT".
Haiti will not observe DST in 2016.
Palestine's spring-forward transition on 2016-03-26 is at 01:00,
not 00:00. Guess future transitions will be March's last Saturday
at 01:00, not March's last Friday at 24:00.
2016c: http://mm.icann.org/pipermail/tz-announce/2016-March/000037.html
Changes affecting future time stamps
Azerbaijan no longer observes DST.
Chile reverts from permanent to seasonal DST.
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Note for Openwrt usage:
Either musl or busybox does not like the new timezone format.
Although the rule looks ok in /etc/TZ, timezone is interpreted wrongly
by date, uptime etc. "Old timezones" are handle correctly, but these
new "<+04>-4" style zones do not work. Example below:
Europe/Helsinki
root@OpenWrt:~# cat /etc/TZ
EET-2EEST,M3.5.0/3,M10.5.0/4
root@OpenWrt:~# uptime
11:00:52 up 18:17, load average: 0.43, 0.13, 0.11
root@OpenWrt:~# date
Wed Mar 30 11:00:55 EEST 2016
Europe/Astrakhan
( Time is showed as GMT instead of the correct zone and
zone name is parsed wrongly )
root@OpenWrt:~# cat /etc/TZ
<+04>-4
root@OpenWrt:~# uptime
08:02:52 up 18:19, load average: 0.17, 0.18, 0.13
root@OpenWrt:~# date
Wed Mar 30 08:02:59 +04>-4 2016
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Some packages have different variants that have different
capabilities depending on which libraries against which
they are linked. Add a function to check which library a
binary links against in order to determine available
functionality.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Fix a bug introduced by #561
Function 'shellsqescape' calls 'gsub' with the empty result string 'res'
instead of the actual parameter 'value'. This leads into error:
.../util.lua:160: bad argument #1 to 'gsub' (string expected, got nil)
Fix error by passing the correct parameter to the function.
After the fix, the unmount button introduced by #561 finally works.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also
the 'nat' table for ipv6, and packages like 'adblock' utilize that table.
Currently that table is not shown on the Luci firewall status page,
although it is visible by 'ip6tables -L -v -t nat' from console.
Detect 'nat' table's presence from /proc/net/ip6_tables_names
Show 'nat' table in Status->Firewall->IPv6 if that table is present.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Add an empty, normally invisible label after checkboxes and radio buttons
with cbi-input-{checkbox,radio} classes to allow CSS styling them as
suggested on http://www.paulund.co.uk/style-checkboxes-with-css
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
|
|
Fall back to default language if "auto" is configured, but none provided by
the browser matches.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
radio/checkbox widgets
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
luci-base: fixed tabbed map when using NamedSection of same type
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Eliminate more inline scripts in favor to global initialization, use a global
object for sharing fixed strings instead of passing them to each invocation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
* fixed tabbed map when using NamedSection of same sectiontype
* add error message on which tab(s) the invalid/required fields are located
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
|
|
Update timezone data to 2016a.
http://mm.icann.org/pipermail/tz-announce/2016-January/000035.html
Changes affecting future time stamps
America/Cayman will not observe daylight saving this year after all.
Revert our guess that it would. (Thanks to Matt Johnson.)
Asia/Chita switches from +0800 to +0900 on 2016-03-27 at 02:00.
(Thanks to Alexander Krivenyshev.)
Asia/Tehran now has DST predictions for the year 2038 and later,
to be March 21 00:00 to September 21 00:00. This is likely better
than predicting no DST, albeit off by a day every now and then.
Changes affecting past and future time stamps
America/Metlakatla switched from PST all year to AKST/AKDT on
2015-11-01 at 02:00. (Thanks to Steffen Thorsen.)
America/Santa_Isabel has been removed, and replaced with a
backward compatibility link to America/Tijuana. Its contents were
apparently based on a misreading of Mexican legislation.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Fix links to point into Github repo instead of luci.subsignal.org
- the hint to file a bug in dispatcher
- footers of Bootstrap and Firefunk themes
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
status.lua - change default directory of dhcp.leases file
sys.lua - read location of dhcp.leases file from uci
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
|
