summaryrefslogtreecommitdiffhomepage
path: root/modules/luci-base/luasrc
AgeCommit message (Collapse)Author
2016-02-10luci-base: cbi: further refactoringJo-Philipp Wich
Eliminate more inline scripts in favor to global initialization, use a global object for sharing fixed strings instead of passing them to each invocation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-02-09luci-base: fix dependency handling of optionals (#645)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-02-09luci-base: cbi: remove duplicate id from templateJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-02-07timezone data: update to 2016aHannu Nyman
Update timezone data to 2016a. http://mm.icann.org/pipermail/tz-announce/2016-January/000035.html Changes affecting future time stamps America/Cayman will not observe daylight saving this year after all. Revert our guess that it would. (Thanks to Matt Johnson.) Asia/Chita switches from +0800 to +0900 on 2016-03-27 at 02:00. (Thanks to Alexander Krivenyshev.) Asia/Tehran now has DST predictions for the year 2038 and later, to be March 21 00:00 to September 21 00:00. This is likely better than predicting no DST, albeit off by a day every now and then. Changes affecting past and future time stamps America/Metlakatla switched from PST all year to AKST/AKDT on 2015-11-01 at 02:00. (Thanks to Steffen Thorsen.) America/Santa_Isabel has been removed, and replaced with a backward compatibility link to America/Tijuana. Its contents were apparently based on a misreading of Mexican legislation. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-02-02luci-base: fix parsing of non-TCP streams in conntrack tableJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-02-02Fix embedded links: github instead of luci.subsignal.orgHannu Nyman
Fix links to point into Github repo instead of luci.subsignal.org - the hint to file a bug in dispatcher - footers of Bootstrap and Firefunk themes Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-01-23luci-base: fix initialization of MultiValue optionsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-21sys.lua _nethints(): read location of dhcp.lease file from uciChristian Schoenebeck
status.lua - change default directory of dhcp.leases file sys.lua - read location of dhcp.leases file from uci Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2016-01-20luci-base: luci.sys.net: use luci.ip.neighbors() instead of /proc/net/arpJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-20luci-base: add luci.sys.net.host_hints() and regenerate documentationJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-19luci-base: add missing Lua side changes for new dependency codeJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-18luci-base: cbi: refactor event handling jsJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-18luci-base: refactor cbi dependency handling codeJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-18luci-base: improve tab hide logicJo-Philipp Wich
Do not rely on explicit child counts but inspect the code instead to decide when to hide tabs or not. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-18luci-base: add extra css class for map level tabs, don't track tab child countJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-18luci-base: do not render section description tag when description is emptyJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-15luci-base: add basic support for CBI map level tabbingJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-15luci-base: prevent CBI map save on invalid values (#618)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-15luci-base: initialize CBI optionals on initial Map render (#618)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2016-01-15Merge pull request #563 from cshore/pull-request-app-uhttpdJo-Philipp Wich
Pull request app uhttpd
2016-01-11luci-base: properly handle ubus connections for non-root (#570, #571)Jo-Philipp Wich
Instead of relying on the connect-before-setuid hack, ship a proper acl definition file whitelisting the procedures that LuCI requires on its non-root pages. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-17Merge pull request #464 from remakeelectric/pulls/list-operationsJo-Philipp Wich
get/set list operations and documentation
2015-12-17Merge pull request #577 from cshore/pull-request-safe-file-uploadJo-Philipp Wich
luci-base: Make default for FileUpload 'safe'
2015-12-15validation: Add option ipv4only option to host and hostport datatypesDaniel Dickinson
Some applications only support ipv4 so add ipv4only option to host and hostport datatypes so that for thos applications that when an IP address is specified only and ipv4 ip address gets accepted.
2015-12-15modules/luci-base: Fix ipaddrport validator to support ipv6Daniel Dickinson
The previous versiono of ipaddrport validator only worked for ipv4 due to disallowing colons (:) in ip address which obvious fails for ipv6. We now instead allow either ipv4 address or an ipv6 address of the form [<ipv6address>]:port
2015-12-15luci-base: Make default for FileUpload 'safe'Daniel Dickinson
Some files and pointers to files are not safe to remove without a replacement file and config pointing to the file. For instance for uhttpd application in the works, removing the certificate or key config or files without having the replacements in places renders the WeUI inaccessible. The only other place where FileUpload is currently used is for wifi certificates for which the 'safe' handling is also preferred. Therefore make the default for the FileUpload widget the safe handling and add a property self.unsafeupload that allows for the old unsafe handling should it prove useful in some case. Also allow to specify a file already on router instead of uploading a file. Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
2015-12-15Merge pull request #564 from cshore/pull-request-app-firewall-timedateJo-Philipp Wich
Pull request app firewall timedate
2015-12-15lib-nixio / luci-base: Fix for reading csrf token prevents file uploadDaniel Dickinson
The call to http.formvalue in order to read the csrf token causes _parse_input to be triggered *before* controllers and cbi maps have been built. This results in the failure of file uploads because the file handler is not yet in place when _parse_input gets called, and it is in _parse_input that POST data is parsed (including files). To fix this we add the ability to write file fields to temporary files (using mkstemp and unlink in nixio.file) and use this to store file data until the filehandler is registered, with a fallback to reading the file data into memory. Once the filehandler callback gets registered we iterate though all previously parsed (saved) files and copy the data to the file handler, and then close the temporary file (which finally removes because we unlinked after creating the file, but didn't close the file so unlink was deferred). Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2015-12-15validation: Add option ipv4only option to host and hostport datatypesDaniel Dickinson
Some applications only support ipv4 so add ipv4only option to host and hostport datatypes so that for thos applications that when an IP address is specified only and ipv4 ip address gets accepted.
2015-12-15modules/luci-base: Fix ipaddrport validator to support ipv6Daniel Dickinson
The previous versiono of ipaddrport validator only worked for ipv4 due to disallowing colons (:) in ip address which obvious fails for ipv6. We now instead allow either ipv4 address or an ipv6 address of the form [<ipv6address>]:port
2015-12-15luci-base: Make default for FileUpload 'safe'Daniel Dickinson
Some files and pointers to files are not safe to remove without a replacement file and config pointing to the file. For instance for uhttpd application in the works, removing the certificate or key config or files without having the replacements in places renders the WeUI inaccessible. The only other place where FileUpload is currently used is for wifi certificates for which the 'safe' handling is also preferred. Therefore make the default for the FileUpload widget the safe handling and add a property self.unsafeupload that allows for the old unsafe handling should it prove useful in some case. Also allow to specify a file already on router instead of uploading a file. Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
2015-12-14applications: firewall: Add time and date for rules and redirectsDaniel Dickinson
UCI config for the firewall has the option of specifying time and date limitations; add these options the UI.
2015-12-14luci-base: Add time and data datatypes for use with firewall appDaniel Dickinson
Adding LuCI configuation of the firewall time and data uci options is in progress and this adds the necessary datatypes for validating those fields.
2015-12-12modules/luci-base: Move LuCI FileUpload directory to /etc/luci-uploads and ↵Daniel Dickinson
save across sysupgrade /lib/uci/upload is a rather odd place for configuration files Also the files were not saved across sysupgrade, which is somewhat counter-productive for configuration files. Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
2015-12-09luci-base: rewrite luci.sys.net.conntrack()Jo-Philipp Wich
The new function is twice as fast as the old implementation and properly summarizes outgoing and incoming byte and packet counters. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-02luci-base: fix escaping lua string to js reprYousong Zhou
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2015-12-02luci-base: add hostport and ipaddrport validation typesJo-Philipp Wich
Add two new types 'hostport' and 'ipaddrport' to validate strings in the form 'sub.example.org:1234' and '0.0.0.0:80'. The 'hostport' accepts hostnames or IP addresses followed by a colon and a port number while the 'ipaddrport' type accepts numeric IP addresses only, followed by a colon and a port. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-12-02luci-base: Add function for shell single-quote parameter escapingDaniel Dickinson
When using os.execute or luci.sys.call the shell is called with the command line which means that standard shell interpretation of strings occurs. To allow to use these commands more easily we add functions for properly escaping single-quoted strings used on the command line
2015-11-26Merge pull request #534 from yousong/add-luci-proto-ppposshJo-Philipp Wich
Add luci proto pppossh
2015-11-21luci-base: use board.json to infer switch netdevJo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-21luci-base: switch to luci-lib-jsoncJo-Philipp Wich
Add dependency on luci-lib-jsonc and use it to reimplement luci.util.serialize_json(). Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-17luci-base: eliminate use of uci state vars in luci.model.networkJo-Philipp Wich
Also implement :ipaddrs() and :ip6addrs() helper for network instances. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-16luci-base: fix uci documentation issue (#538)Jo-Philipp Wich
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-11-03Redirect to root on empty pathJoel Pedraza
* Prevents an empty Location header * Useful in environments where build_url() could return an empty string (such as http server rewrites requests to /cgi-bin/luci) Signed-off-by: Joel Pedraza <github@saik0.net>
2015-11-03luci-base: add support for DynamicList with FileBrowserYousong Zhou
Two new arguments url, defpath were added to cbi_dynlist_init() for initializing the brower button. An example of usage identity = section:taboption("general", DynamicList, "identity", translate("List of SSH key files for auth")) identity.datatype = "file" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2015-11-03luci-base: urlencode: encode all except unreserved characters.Yousong Zhou
As per http://tools.ietf.org/html/rfc3986#section-2.3 Characters that are allowed in a URI but do not have a reserved purpose are called unreserved. These include uppercase and lowercase letters, decimal digits, hyphen, period, underscore, and tilde. unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2015-11-01template cbi/value.htm implement documented property maxlengthChristian Schoenebeck
template cbi/value.htm implement already documented property maxlength Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2015-10-31cbi.lua: Implement "readonly" property for "Value"Christian Schoenebeck
cbi.lua: Implement "readonly" property for "Value" Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2015-10-31template cbi/value.htm: add "readonly" propertyChristian Schoenebeck
template cbi/value.htm: add "readonly" property Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2015-10-30cbi.lua: Implement Flag.validate functionChristian Schoenebeck
cbi.lua - Implement Flag.validate function to be overwritable - rewritten if clause for easier reading ;-) Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 11:46:10 +0000