| Age | Commit message (Collapse) | Author |
|---|
|
Several devices have multiple upstream interfaces, for example a fixed
and a mobile broadband connection. Currently, only one upstream
interface is shown per address family in Luci. So in my example, one of
the interfaces would not appear on the Status-page.
This PR introduces support for showing multiple upstream interfaces on
the Status-page. The code is not very complicated. get_status_by_route()
has been extended to return a list of all routes, and
get_wannet()/get_wan6net() now returns all upstream interfaces.
I could not find any other (active) users of these three functions than
calls triggered from the Status-page, so changing the default behavior
should be fine. get_wandev()/get_wan6dev() called get_status_by_route(),
but I could not find any place where those functions were called. I
removed the dev-functions instead of keeping the old
get_status_by_route().
On the status page, the wan/wan6-variables have been replaced with
arrays. When populating the html, we now iterate through these arrays
and create one element for each interface.
I have tested the code with different interface types, v4, v6, as well as
disconnecting and connecting interfaces. The status is updated and the
correct interfaces (or sometimes none at all) are shown.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
|
|
- Use native rpcd uci changes format instead of incompletely converting
back and forth between the old and the new format
- Rework uci changelog template to print the equivalent uci commands
for the various changes
- Rework theme headers to properly count the uncomitted changes
- Rework theme CSS to properly style new changelog
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Rework the apply confirmation mechanism to be session agnostic in order to
circumvent cross domain restrictions which prevent the JS code from issuing
apply confirm requests in some cases, e.g. when changing the LAN IP.
Confirmation calls may now be done from unauthenticated pages, as long as a
matching confirmation token is sent along with the request.
The reasoning behind this is that there is little security impact in
confirming pending apply sessions, especially since those sessions can only
be initiated while being authenticated.
After this change, LuCI will now launch a confirmation process on every
rendered page when a rollback is pending. The confirmation will happen
regardless of whether the user is logged in or not, or if the current page
is a CBI form or static template.
A confirmation request now also requires a random one-time token which is
rendered along with the confirmation JavaScript code in order to succeed.
This token is not meant to provide security but to ensure that the confirm
was triggered from an interactive browser session and not some background
HTTP requests that happened to end up in the admin ui.
As a consequence, the different apply/confirm/rollback code paths in CBI
maps and the UCI change/revert pages have been consolidated into one common
implementation residing in the common global theme agnostic footer template.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
This allows exposing virtual ubus-based network interfaces in LuCI.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
- Properly serialize option delete changelogs
- Do not perform a section create if a nil value is passed to set()
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Should prevent the crash mentioned in #1779.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
On certain environments, mainly with the embedded uhttpd interpreter, the
luci.config class cannot be loaded due to a circular dependency with the
luci.model.uci class.
Break up the dependency by deferring the loading of luci.config in
luci.model.uci until it is actually needed.
Fixes #1803, FS#1553.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
UCI apply/rollback workflow
|
|
Switch to rpcd based uci apply/rollback workflow which helps to avoid soft-
bricking devices by requiring an explicit confirmation call after config
apply.
When a user now clicks "Save & Apply", LuCI first issues a call to uci apply
which commits and reloads configuration, then goes into a polling countdown
mode where it repeatedly attempts to call uci confirm.
If the committed configuration is sane, the confirm call will go through and
cancel rpcd's pending rollback timer.
If the configuration change leads to a loss of connectivity (e.g. due to bad
firewall rules or similar), the rollback mechanism will kick in after the
timeout and revert configuration files and pending changes to the pre-apply
state.
In order to cover such rare cases where a lost of connectivity is expected
and desired, the user is offered an "unchecked" apply option after timing
out, which allows committing and applying the changes anyway, without the
extra safety checks.
As a consequence of this change, the luci-reload mechanism is now completely
unsused since rpcd uses ubus config reload signals to reload affected
services, which means that only procd-enabled services will receive proper
reload treatment with the new workflow.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Show the correct wifi chip identification in case iwinfo
recognises the chip.
So far the wifidev.get_i18n function has practically always
returned just "Generic", but use iwinfo.hardware_name to
fetch the name.
In case iwinfo returns the default "Generic MAC80211", there
is a double 80211 in the final string, which is a cosmetic bug.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Introduce luci.model.uci.set_session_id() and luci.model.uci.get_session_id()
to set and get the effective session ID respectively.
When a session ID is set, it is sent as `ubus_rpc_session` attribute to rpcd,
causing it to use per-session change directories, isolating LuCI changes from
the global system uci state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Properly propagate the config parameter to the foreach iterator in order
to fix get_first() lookups.
Fixes #1734.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Introduce a get_state() function which can be used to access legacy
uci state variables. This is usually not needed anymore but some
packages (mainly mwan3) still rely on this.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
luci-base/network.lua: fix get_interface function
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Switch luci.model.uci to use ubus uci calls instead of driving libuci-lua
directly.
This prepares support for more advanced features such as per-session change
isolation and configuration rollback on errors.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
* fix wrong private function call to handle
section id as parameter (fix for #1687)
Signed-off-by: Dirk Brenken <dev@brenken.org>
|
|
Use the new luci.ip MAC address facilities to parse and verify MAC addresses
in a common way, instead of relying on various ad-hoc solutions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
If IPv6 prefix assignment is disabled, the "local-address" structure
might exist, but be empty which causes the adress formatting in the
network model class to bail out.
Verify the completeness of the "local-address" structure before using
it in order to avoid runtime errors.
Fixes #1657.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Keep the ifname and bridge state backup variables in /etc/config/luci to not
pollute /etc/config/network.
Fixes #1655.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
OpenWrt/LEDE introduced the "local-address" field a while back to expose the
effective local host address of the delegated prefix, so use that information
instead of assuming `[prefix]:1`.
Fixes #1484.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
The _wifi_sid_by_ifname() function depends on _wifi_state_by_ifname()
so reorder the private helper functions accordingly to avoid nil value
call attempts.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
- fix mapping of ubus wireless state to uci declared vifs
- fix leaking foreign vif info into per-phy iwinfo stats
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Add support for 'ip6ifaceid' option for proto_static in LuCI.
Information about the option:
The option is optional and defaults to '::1'.
Allowed values: 'eui64', 'random', fixed value like '::1' or '::1:2'
When IPv6 prefix (like 'a:b:c:d::') is received from a delegating
server, the ip6ifaceid suffix (like '::1') is used to form
the IPv6 address ('a:b:c:d::1') for the interface.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Remove the code related to the deprecated madwifi driver.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Wireless monitor interfaces usually have no SSID set in their config and
various network model utility functions did not handle this case properly,
mainly while trying to incorperate the SSID string into various description
labels.
Fall back to the internal network id (radioX.networkY) in cases where neither
the SSID nor the BSSID are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
|
|
get/set list operations and documentation
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Also implement :ipaddrs() and :ip6addrs() helper for network instances.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Add package *.ipk size information to package listing in Luci,
as opkg was today extended to support listing also the size information.
Visible fields are now: name, version, size, description
That will help users considering installation of a certain package
to assess its size impact on flash.
Note: Opkg data includes the size of the .ipk file, not the expanded size.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Previously, get_list("fake", "non-existent", "notreal") would still
return a table, just empty. This is nice, as you can always iterate the
returned table, without having to check it first.
However, if you happened to pass a nil for any of the parameters, you
would actually get a nil in return. This was inconsistent.
The documentation is updated to clarify the behaviour of this function.
Signed-off-by: Karl Palsson <karlp@remake.is>
|
|
Allows lists fetched with get_list to be modified and simply passed back
to set_list. Explicitly calling set_list() with an empty list is clearly
requesting that there be zero list items, ie, deletion of the option
altogether.
Signed-off-by: Karl Palsson <karlp@remake.is>
|
|
Many packages currently include a git commit hash in version string.
That makes versions string very long and the version column takes much space
when listing available/installed packages in Luci.
Longest version string is 58 characters (micropython).
85 packages have at least 50 chars and 150 packages at least 40 chars.
Adjust Luci to display max. 26 characters (= luci's own version string).
Longer version strings are cut to: "first 21c" + ".." + "last 3c"
The last 3 chars are used to preserve the possible PKG_REVISION string.
E.g. 'opkg' has only hash+PKG_REVISION, so using only start of the string
might not be optimal.
Examples:
1.3.10-20150302-f2a889564b3a215902622b040a1247af38cb8203-1
1.3.10-20150302-f2a88..3-1
0.1-20150302-654c7d288603f7dae09eb09b57fb67b38c7ac6c3-1
0.1-20150302-654c7d28..3-1
9c97d5ecd795709c8584e972bfdf3aee3a5b846d-7
9c97d5ecd795709c8584e..d-7
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
function compare_versions(): replace Lua Math Library call with if clause
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
|
|
* minor fix function _list() set to local
* new function compare_version() lua version of opkg compare-version
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
|
|
Mode of an active network on the same radio.
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
